Multi-Eruption Solar Energetic Particle Events Observed by SOHO/ERNE

In the last two decades of studying the Solar Energetic Particle (SEP) phenomenon, intensive emphasis has been put on how and when and where these SEPs are injected into interplanetary space. It is well known that SEPs are related to solar flares and CMEs. However, the role of each in the acceleration of SEPs has been under debate since the major role was taken from flares ascribed to CMEs step by step after the skylab mission, which started the era of CME spaceborn observations. Since then, the shock wave generated by powerful CMEs in between 2-5 solar radii is considered the major accelerator. The current paradigm interprets the prolonged proton intensity-time profile in gradual SEP events as a direct effect of accelerated SEPs by shock wave propagating in the interplanetary medium. Thus the powerful CME is thought of as a starter for the acceleration and its shock wave as a continuing accelerator to result in such an intensity-time profile. Generally it is believed that a single powerful CME which might or might not be associated with a flare is always the reason behind such gradual events.

In this work we use the Energetic and Relativistic Nucleus and Electrons ERNE instrument on board Solar and Heliospheric Observatory SOHO to present an empirical study to show the possibility of multiple accelerations in SEP events. In the beginning we found 18 double-peaked SEP events by examining 88 SEP events. The peaks in the intensity-time profile were separated by 3-24 hours. We divided the SEP events according to possible multiple acceleration into four groups and in one of these groups we find evidence for multiple acceleration in velocity dispersion and change in the abundance ratio associated at transition to the second peak. Then we explored the intensity-time profiles of all SEP events during solar cycle 23 and found that most of the SEP events are associated with multiple eruptions at the Sun and we call those events as Multi-Eruption Solar Energetic Particles (MESEP) events. We use the data available by Large Angle and Spectrometric Coronograph LASCO on board SOHO to determine the CME associated with such events and YOHKOH and GOES satellites data to determine the flare associated with such events. We found four types of MESEP according to the appearance of the peaks in the intensity-time profile in large variation of energy levels. We found that it is not possible to determine whether the peaks are related to an eruption at the Sun or not, only by examining the anisotropy flux, He/p ratio and velocity dispersion. Then we chose a rare event in which there is evidence of SEP acceleration from behind previous CME. This work resulted in a conclusion which is inconsistent with the current SEP paradigm. Then we discovered through examining another MESEP event, that energetic particles accelerated by a second CME can penetrate a previous CME-driven decelerating shock. Finally, we report the previous two MESEP events with new two events and find a common basis for second CME SEPs penetrating previous decelerating shocks. This phenomenon is reported for the first time and expected to have significant impact on modification of the current paradigm of the solar energetic particle events.

Microfibril angle and density patterns of fertilized and irrigated Norway spruce

Abstract

Testing a large-scale forestry scenario model by means of successive inventories on a forest property

Abstract

Linear prediction application for modelling the relationships between a large number of stand characteristics of Norway spruce stands

Abstract

Software SMEs asStrategic Partners in the Partner Programs of Large International Companies

Tutkielman tavoitteena oli tutkia pienten- ja keskisuurten (PK) ohjelmistoyritysten kansainvälisiä kumppanuuksia. Päätavoitteena oli löytää keinoja kuinka PK-ohjelmistoyritykset voisivat tulla strategisiksi kumppaneksi suurten kansainvälisten yritysten kumppanuusohjelmissa. Lisäksi tutkielmassa oli tavoitteena selvittää kuinka kumppaneiden välistä sitoutumista voitaisiin vahvistaa, jotta PK-ohjelmistoyritykset voisivat saavuttaa todellista lisäarvoa ja kansainvälistä kasvua kumppanuusohjelmien kautta. Tutkielma jakaantuu teoreettiseen ja empiiriseen osaan. Teoreettinen osa keskittyy tarkastelemaan korkean teknologian markkinointia ohjelmistoalalla sekä kansainvälisiä kumppanuuksia. Suurten yritystenkumppanuusohjelmia ei ole tutkittu suomalaisten PK-ohjelmistoyritysten näkökulmasta, minkä vuoksi empiirinen tutkimus on perusteltua. Empiirinen tutkimus toteutettiin laadullisena case-tutkimuksena ja tutkimusmenetelmänä käytettiin puolistrukturoitua haastattelua. Tutkimustulokset osoittavat, että strategisen kumppanin aseman saavuttaminen on pitkä ja haastava matka PK-yrityksille. Suurten kansainvälisten yritysten kumppanuusohjelmat ovat useimmiten monimutkaisia ja todellisen lisäarvon saavuttaminen kumppanuusohjelman kautta vaatii paljon resursseja PK-yrityksiltä. Jotta PK-yritykset voisivat saavuttaa ja säilyttää strategisen kumppanin aseman kumppanuusohjelmassa, vaatii se aktiivista ja päivittäistä vuorovaikutusta kumppaneiden kesken. Erityisesti tiiviit henkilösuhteet oikeiden avainhenkilöiden kanssa ovat välttämättömyys. Läheiset kontaktit mahdollistavat sen, että PK-yritykset voivat ainakin osittain ohittaa kumppanuusohjelman byrokratian, mikä lisää luottamusta ja sitoutumista kumppanuussuhteessa sekä edistää kansainvälistä kasvua ja menestystä liiketoiminnassa.

A computationally efficient shear deformable beam element for large deformation multibody applications

In this paper, a new two-dimensional shear deformable beam element based on the absolute nodal coordinate formulation is proposed. The nonlinear elastic forces of the beam element are obtained using a continuum mechanics approach without employing a local element coordinate system. In this study, linear polynomials are used to interpolate both the transverse and longitudinal components of the displacement. This is different from other absolute nodal-coordinate-based beam elements where cubic polynomials are used in the longitudinal direction. The accompanying defects of the phenomenon known as shear locking are avoided through the adoption of selective integration within the numerical integration method. The proposed element is verified using several numerical examples, and the results are compared to analytical solutions and the results for an existing shear deformable beam element. It is shown that by using the proposed element, accurate linear and nonlinear static deformations, as well as realistic dynamic behavior, can be achieved with a smaller computational effort than by using existing shear deformable two-dimensional beam elements.

Competitor Information andCompetitive Knowledge Management in a Large Industrial Organization

Thisthesis supplements the systematic approach to competitive intelligence and competitor analysis by introducing an information-processing perspective on management of the competitive environment and competitors therein. The cognitive questions connected to the intelligence process and also the means that organizational actors use in sharing information are discussed. The ultimate aim has been to deepen knowledge of the different intraorganizational processes that are used in acorporate organization to manage and exploit the vast amount of competitor information that is received from the environment. Competitor information and competitive knowledge management is examined as a process, where organizational actorsidentify and perceive the competitive environment by using cognitive simplification, make interpretations resulting in learning and finally utilize competitor information and competitive knowledge in their work processes. The sharing of competitive information and competitive knowledge is facilitated by intraorganizational networks that evolve as a means of developing a shared, organizational level knowledge structure and ensuring that the right information is in the right place at the right time. This thesis approaches competitor information and competitive knowledge management both theoretically and empirically. Based on the conceptual framework developed by theoretical elaboration, further understanding of the studied phenomena is sought by an empirical study. The empirical research was carried out in a multinationally operating forest industry company. This thesis makes some preliminary suggestions of improving the competitive intelligence process. It is concluded that managing competitor information and competitive knowledge is not simply a question of managing information flow or improving sophistication of competitor analysis, but the crucial question to be solved is rather, how to improve the cognitive capabilities connected to identifying and making interpretations of the competitive environment and how to increase learning. It is claimed that competitive intelligence can not be treated like an organizational function or assigned solely to a specialized intelligence unit.

Effect of Mechanical and Geometric Mismatching on Fatigue and Damage of Welded Joints

The future of high technology welded constructions will be characterised by higher strength materials and improved weld quality with respect to fatigue resistance. The expected implementation of high quality high strength steel welds will require that more attention be given to the issues of crack initiation and mechanical mismatching. Experiments and finite element analyses were performed within the framework of continuum damage mechanics to investigate the effect of mismatching of welded joints on void nucleation and coalescence during monotonic loading. It was found that the damage of undermatched joints mainly occurred in the sandwich layer and the damageresistance of the joints decreases with the decrease of the sandwich layer width. The damage of over-matched joints mainly occurred in the base metal adjacent to the sandwich layer and the damage resistance of the joints increases with thedecrease of the sandwich layer width. The mechanisms of the initiation of the micro voids/cracks were found to be cracking of the inclusions or the embrittled second phase, and the debonding of the inclusions from the matrix. Experimental fatigue crack growth rate testing showed that the fatigue life of under-matched central crack panel specimens is longer than that of over-matched and even-matched specimens. Further investigation by the elastic-plastic finite element analysis indicated that fatigue crack closure, which originated from the inhomogeneousyielding adjacent to the crack tip, played an important role in the fatigue crack propagation. The applicability of the J integral concept to the mismatched specimens with crack extension under cyclic loading was assessed. The concept of fatigue class used by the International Institute of Welding was introduced in the parametric numerical analysis of several welded joints. The effect of weld geometry and load condition on fatigue strength of ferrite-pearlite steel joints was systematically evaluated based on linear elastic fracture mechanics. Joint types included lap joints, angle joints and butt joints. Various combinations of the tensile and bending loads were considered during the evaluation with the emphasis focused on the existence of both root and toe cracks. For a lap joint with asmall lack-of-penetration, a reasonably large weld leg and smaller flank angle were recommended for engineering practice in order to achieve higher fatigue strength. It was found that the fatigue strength of the angle joint depended strongly on the location and orientation of the preexisting crack-like welding defects, even if the joint was welded with full penetration. It is commonly believed that the double sided butt welds can have significantly higher fatigue strength than that of a single sided welds, but fatigue crack initiation and propagation can originate from the weld root if the welding procedure results in a partial penetration. It is clearly shown that the fatigue strength of the butt joint could be improved remarkably by ensuring full penetration. Nevertheless, increasing the fatigue strength of a butt joint by increasing the size of the weld is an uneconomical alternative.