Impingement jet cooling of end windings in a high-speed electric machine

The rotational speed of high-speed electric machines is over 15 000 rpm. These machines are compact in size when compared to the power rate. As a consequence, the heat fluxes are at a high level and the adequacy of cooling becomes an important design criterion. In the high-speed machines, the air gap between the stator and rotor is a narrow flow channel. The cooling air is produced with a fan and the flow is then directed to the air gap. The flow in the gap does not provide sufficient cooling for the stator end windings, and therefore additional cooling is required. This study investigates the heat transfer and flow fields around the coil end windings when cooling jets are used. As a result, an innovative and new assembly is introduced for the cooling jets, with the benefits of a reduced amount of hot spots, a lower pressure drop, and hence a lower power need for the cooling fan. The gained information can also be applied to improve the cooling of electric machines through geometry modifications. The objective of the research is to determine the locations of the hot spots and to find out induced pressure losses with different jet alternatives. Several possibilities to arrange the extra cooling are considered. In the suggested approach cooling is provided by using a row of air jets. The air jets have three main tasks: to cool the coils effectively by direct impingement jets, to increase and cool down the flow that enters the coil end space through the air gap, and to ensure the correct distribution of the flow by forming an air curtain with additional jets. One important aim of this study is the arrangement of cooling jets in such manner that hot spots can be avoided to wide extent. This enables higher power density in high-speed motors. This cooling system can also be applied to the ordinary electric machines when efficient cooling is needed. The numerical calculations have been performed using a commercial Computational Fluid Dynamics software. Two geometries have been generated: cylindrical for the studied machine and Cartesian for the experimental model. The main parameters include the positions, arrangements and number of jets, the jet diameters, and the jet velocities. The investigated cases have been tested with two widely used turbulence models and using a computational grid of over 500 000 cells. The experimental tests have been made by using a simplified model for the end winding space with cooling jets. In the experiments, an emphasis has been given to flow visualisation. The computational analysis shows good agreement with the experimental results. Modelling of the cooling jet arrangement enables also a better understanding of the complex system of heat transfer at end winding space.

Towards desired crystalline product properties: In-situ monitoring of batch crystallization

The objective of industrial crystallization is to obtain a crystalline product which has the desired crystal size distribution, mean crystal size, crystal shape, purity, polymorphic and pseudopolymorphic form. Effective control of the product quality requires an understanding of the thermodynamics of the crystallizing system and the effects of operation parameters on the crystalline product properties. Therefore, obtaining reliable in-line information about crystal properties and supersaturation, which is the driving force of crystallization, would be very advantageous. Advanced techniques, such asRaman spectroscopy, attenuated total reflection Fourier transform infrared (ATR FTIR) spectroscopy, and in-line imaging techniques, offer great potential for obtaining reliable information during crystallization, and thus giving a better understanding of the fundamental mechanisms (nucleation and crystal growth) involved. In the present work, the relative stability of anhydrate and dihydrate carbamazepine in mixed solvents containing water and ethanol were investigated. The kinetics of the solvent mediated phase transformation of the anhydrate to hydrate in the mixed solvents was studied using an in-line Raman immersion probe. The effects of the operation parameters in terms of solvent composition, temperature and the use of certain additives on the phase transformation kineticswere explored. Comparison of the off-line measured solute concentration and the solid-phase composition measured by in-line Raman spectroscopy allowedthe identification of the fundamental processes during the phase transformation. The effects of thermodynamic and kinetic factors on the anhydrate/hydrate phase of carbamazepine crystals during cooling crystallization were also investigated. The effect of certain additives on the batch cooling crystallization of potassium dihydrogen phosphate (KDP) wasinvestigated. The crystal growth rate of a certain crystal face was determined from images taken with an in-line video microscope. An in-line image processing method was developed to characterize the size and shape of thecrystals. An ATR FTIR and a laser reflection particle size analyzer were used to study the effects of cooling modes and seeding parameters onthe final crystal size distribution of an organic compound C15. Based on the obtained results, an operation condition was proposed which gives improved product property in terms of increased mean crystal size and narrowersize distribution.

High pressure compression of filter cakes

The purpose of this thesis was to investigate the compression of filter cakes at high filtration pressures with five different test materials and to compare the energy consumption of high pressure compression with the energy consumption of thermal drying. The secondary target of this study was to investigate the particle deformation of test materials during filtration and compression. Literature part consists of basic theory of filtration and compression and of the basic parameters that influence the filtration process. There is also a brief description about all of the test materials including their properties and their industrial production and processing. Theoretical equations for calculating the energy consumptions of the filtrations at different conditions are also presented. At the beginning of the experiments at experimental part, the basic filtration tests were done with all the five test materials. Filtration tests were made at eight different pressures, from 6 bars up to 100 bars, by using piston press pressure filter. Filtration tests were then repeated by using a cylinder with smaller slurry volume than in the first series of filtration tests. Separate filtration tests were also done for investigating the deformation of solid particles during filtration and for finding the optimal curve for raising the filtration pressure. Energy consumption differences between high pressure filtration and ideal thermal drying process were done partly experimentally and partly by using theoretical calculation equations. By comparing these two water removal methods, the optimal ranges for their use were found considering their energy efficiency. The results of the measurements shows that the filtration rate increased and the moisture content of the filter cakes decreased as the filtration pressure was increased. Also the porosity of the filter cakes mainly decreased when the filtration pressure was increased. Particle deformation during the filtration was observed only with coal particles.

Modeling of high pressure pretreatment process for gold leaching

Investigation of high pressure pretreatment process for gold leaching is the objective of the present master's thesis. The gold ores and concentrates which cannot be easily treated by leaching process are called "refractory". These types of ores or concentrates often have high content of sulfur and arsenic that renders the precious metal inaccessible to the leaching agents. Since the refractory ores in gold manufacturing industry take a considerable share, the pressure oxidation method (autoclave method) is considered as one of the possible ways to overcome the related problems. Mathematical modeling is the main approach in this thesis which was used for investigation of high pressure oxidation process. For this task, available information from literature concerning this phenomenon, including chemistry, mass transfer and kinetics, reaction conditions, applied apparatus and application, was collected and studied. The modeling part includes investigation of pyrite oxidation kinetics in order to create a descriptive mathematical model. The following major steps are completed: creation of process model by using the available knowledge; estimation of unknown parameters and determination of goodness of the fit; study of the reliability of the model and its parameters.

HPV In situ -hybridisaation käyttöönotto

Ihmisen papilloomavirus (Human papillomavirus HPV) aiheuttaa yleisen sukupuoliteitse leviävän tartuntataudin. Virusinfektiolla on todettu olevan yhteys kohdunkaulan syöpään ja on siksi tärkeä tutkimuskohde. Kätilöopiston sairaalan patologian laboratoriossa tutkitaan HPV:ta Hybrid Capture 2 -menetelmällä, joka antaa tuloksen kvantitatiivisena. Tulos on joko positiivinen tai negatiivinen korkean riskin HPV-genotyypeille. Tutkimuskohteena oli ihmisen papilloomavirusta määrittävä in situ -hybridisaatiomenetelmä, joka on tarkoitus ottaa käyttöön Kätilöopiston sairaalan patologian laboratorioon. Näytemateriaali kerättiin HUSLAB:n Qpati-tietokannasta. 40 potilastapausta valittiin, joista kymmenen potilastapausta kuuluu kondyloma planum-, kymmenen dysplasia levis-, kymmenen dysplasia moderata- ja viimeiset kymmenen dysplasia gravis -luokitukseen. Näytteet oli valettu parafiiniin, joista leikkattiin uudet näytelasit. Näistä tehtiin HPV in situ -hybridisaatio-, p16INK4a-, Ki67- ja hematoksyliini-eosiinivärjäykset. HPV ISH:n tuloksia verrattiin negatiivisten ja positiivisten kontrollien antamiin tuloksiin. Lisäksi tutkittiin proteiinien p16INK4a ja Ki67 vastaavuutta HPV ISH:n antamiin tuloksiin. Ki67 ja p16INK4a ovat merkkiaineita, joita havaitaan HPV:n aiheuttamissa dysplastisissa muutoksissa. HE-värjäyksen avulla tarkistettiin diagnoosiluokat. HPV in situ -hybridisaationäytteissä esiintyi HPV DNA-viruskopioita 82,5 %:ssa (33/40). Näytteistä negatiivisen tuloksen antoi 12,5 % (5/40) ja 5 % (2/40) niistä ei voitu tulkita. Immunohistokemialliset värjäykset antoivat keskenään yhteneväisiä tuloksia. Tulokset olivat yhteneviä myös HPV in situ -hybridisaation antamiin tuloksiin. Tulokset olivat luotettavia, koska negatiivinen kontrolli antoi negatiivisen ja positiivinen kontrolli positiivisen tuloksen. Hematoksyliini-eosiinivärjäyksellä tarkistetuista diagnoosiluokista 20 prosenttia (8/40) oli muuttunut. Tulokset olivat luotettavia, joten voidaan todeta, että in situ -hybridisaatiomenetelmä voidaan ottaa käyttöön Kätilöopiston sairaalan patologian laboratoriolle.

Fluorescence in situ hybridization of potato somatohaploids and their somatic hybrid donors using two Solanum brevidens specific sequences

Selostus: Perunan somaattisten hybridien ja niiden somatohaploidien fluoresenssi in situ -hybridisaatio Solanum brevidens -lajin spesifisten sekvenssien avulla

Naudan freemartinismin osoittaminen veren valkosoluista Y-kromosomispesifisellä in situ -hybridisaatiolla

Summary: Diagnosis of freemartinism in cattle by Y chromosome specific in situ hybridisation of blood leukocytes

The p22phox C242T gene polymorphism is associated with a reduced risk of angiographically verified coronary artery disease in a high-risk Finnish Caucasian population. The Finnish Cardiovascular Study.

American Heart Journal Vol. 152, Issue 3, pp 538-542, 2006

Suuren riskin HPV:n osoittaminen nestemäisistä gynekologisista irtosolunäytteistä (ThinPrep®) in situ hybridisaatio -menetelmällä

Kohdunkaulan syöpä on maailmanlaajuisesti naisten toiseksi yleisin syöpätauti. Tutkimuksilla on osoitettu, että 99,7 %:ssa tapauksista taustalla on suuren riskin HPV-infektio (HR-HPV). HPV-infektio voidaan todeta naisilta otettavasta gynekologisesta irtosolunäytteestä sen tunnusomaisten solujen, koilosyyttien, ansiosta. Syövän esiasteissa alkaa koilosyyttien määrä kuitenkin vähentyä. Pahimmissa muutoksissa koilosyyttejä ei enää ole nähtävissä, jolloin HPV-infektio saadaan varmistettua kudosnäytteestä in situ hybridisaatio -menetelmällä (ISH). ISH on virus-DNA -värjäys. Tavallisen gynekologisen irtosolunäytteen rinnalle on kehitetty nestemäinen gynekologinen irtosolunäyte. Suomessa menetelmä on vielä tutkimusasteella, mutta muualla maailmassa sen käyttö on yleistynyt. Tutkimuskäytössä on myös polymeraasiketjureaktio -menetelmä (PCR), jolla voidaan luotettavasti tutkia suuren riskin HPV-infektion läsnäolo nestemäisestä gynekologisesta irtosolunäytteestä. Nestemäinen gynekologinen irtosolunäyte lienee tulevaisuutta myös Suomessa. Uuden menetelmän yleistyessä on mielekästä tutkia sen käyttömahdollisuuksia lisää. Opinnäytetyössäni tutkin, voidaanko potilaiden nestemäisistä gynekologisista irtosolunäytteistä todeta ISH-menetelmällä suuren riskin HPV-DNA:ta. Tutkimukseni käsitti 29 potilastapausta, joista kymmenellä (10) oli sytologisena luokituksena ASC-US, kymmenellä (10) LSIL ja yhdeksällä (9) ASC-H/HSIL. Näiltä potilailta oli määritetty HR-HPV-infektio netemäisistä gynekologisista irtosolunäytteistä myös PCR-menetelmällä. Luotettavuuden lisäämiseksi tein myös potilaiden histologisista näytteistä ISH:n, jonka jo tiedetään olevan toimiva menetelmä. Lisäksi tein proteiinivärjäykset p16INK4a:n ja Ki-67:n. Näiden proteiinien tiedetään lisääntyvän silloin, kun kyseessä on suuren riskin HPV-infektio. Kaikki sytologisista näytteistä tehdyt in situ hybridisaatio -värjäykset antoivat negatiivisen tuloksen. Toisin sanoen HPV-DNA:ta ei voitu havaita. PCR-menetelmällä saatujen tulosten sekä myös kudosnäytteistä tehtyjen ISH-, p16INK4a- ja Ki-67 -värjäysten perusteella tulosten olisi pitänyt olla positiivisia. Kaikkien saatujen tulosten perusteella voidaan todeta, että in situ hybridisaatio -värjäys ei toiminut odotetulla tavalla nestemäisistä gynekologisista irtosolunäytteistä. In situ hybridisaatio on siis nykykäytännöllä toimimaton menetelmä ja se vaatii lisäselvittelyjä.

Marketing in support of sales in industrial high technology company

The aim of this study is to find out how Metso Paper’s marketing could better support sales and how sales people are executing marketing during the sales processes. This study is done from sales people’s point of view. The study is limited to cover only company’s internal environment. This research was executed through literature review and qualitative theme interviews, where 20 of Metso Paper’s sales people were interviewed. The interviewees were asked to tell their opinions about marketing’s support, marketing materials, information and the relationship between sales and marketing. The results of this study show that the relationship between marketing and sales is rather good, but there is still a great need for improvements. It is hoped that marketing would take more part in the selling processes. In addition, more information about the launches and schedules were also hoped for. Marketing is told to be quite Finland centric and sales people are wishing for more adopted marketing materials and occasions. It came up during the interviews, that sales people are not so willing to give regular feedback to marketing and quite often they think that marketing’s role in Metso Paper is not important at all.

Hemiselluloosien erotus ja in situ -modifiointi

Hemiselluloosat kuuluvat selluloosan ja ligniinin ohella puun ja muiden kasvimateriaalien päärakenneaineksiin. Hemiselluloosan kemiallisessa koostumuksessa on eroja kasvilajien välillä, mikä tekee ryhmästä hyvin monimuotoisen. Lehtipuiden pääasiallinen hemiselluloosa on glukuroniksylaani. Ksylaaneja esiintyy laajasti myös muissa kasveissa erilaisina rakenteina. Havupuiden yleisin hemiselluloosa on puolestaan galaktoglukomannaani. Arabinogalaktaani on erityisesti lehtikuusesta runsaana löytyvä hemiselluloosa, jota muissa puulajeissa on vain vähän. Luonnon polymeerejä tutkitaan jatkuvasti muun muassa vaihtoehtojen löytämiseksi raakaöljypohjaisille tuotteille. Aiemmin hemiselluloosia on pääosin hyödynnetty sellaisenaan tai jalostettu esimerkiksi sokereiksi. Selluloosan ja tärkkelyksen tavoin ne voivat kuitenkin toimia myös kemiallisen, fysikaalisen tai entsymaattisen muokkauksen lähtöaineena. Hemiselluloosien käyttöä rajoittaa usein se, että niiden eristäminen kasvimateriaalista hyvällä saannolla on vaikeaa. Useimmiten hemiselluloosa erotetaan biomassasta ligniinin poiston jälkeen uuttamalla erilaisilla reagensseilla, kuten emäksillä. Arabinogalaktaanin erottamiseen ei kuitenkaan vaadita ankaria olosuhteita, vaan yleisimmin siihen riittää uutto vedellä. Kalvosuodatus puolestaan on hyvä keino hemiselluloosan talteenottoon uuttoliuoksista. Tässä työssä tarkasteltiin arabinogalaktaanin erotusta siperianlehtikuusesta uuttokokein. Saadut uuttoliuokset konsentrointiin ja puhdistettiin kalvosuodatusmenetelmillä. Lisäksi tutkittiin eristetyn arabinogalaktaanin käyttöä kemiallisen muokkauksen lähtöaineena, missä pyrkimyksenä oli etenkin in situ -modifiointi suoraan uuttoliuoksessa oleville yhdisteille. Uuttokokeilla saatiin kuitenkin vain pieni osa lehtikuusen arabinogalaktaanista erotetuksi. Myös kalvosuodatusvaiheen aikana menetettiin osa uuttoliuosten arabinogalaktaanista. Koska arabinogalaktaanipitoisuus uuttoliuoksissa jäi hyvin alhaiseksi, in situ -modifiointeja oli vaikea saada onnistumaan. Uutto-olosuhteiden lisätutkimuksella sekä kiinnittämällä erityistä huomiota suodatuskalvojen valintaan voitaneen pitoisuutta nostaa ja saada lisämateriaalia kemiallista muokkausta varten.

Effect of emotions on consumer decision-making in a high involvement product adoption context

This thesis was written in order participate in the emergent discussion on the role of emotions in consumer decision-making. The goal of the thesis was to find out which emotions affect consumer decision-making, how these emotions relate to traditional process models of consumer decision-making, and how emotions and other factors affect consumer decision-making. The thesis is placed into a context of high involvement product adoption. The empirical research was conducted according to a qualitative methodology, which combined video diaries and face-to-face or Skype interviews as data collection methods. The case product category was dancing poles, and four women participated in the study. The central results indicate that emotion and cognition walk hand in hand in consumer decision-making, that consumers experience a variety of emotions during a decision-making process, and that emotions have an important effect on consumer decision-making and consumer behavior.

Determinants of Polylepis (Rosaceae) Forest Distribution and Treeline Formation in the High Andes

High elevation treelines are formed under common temperature conditions worldwide, but the functional mechanisms that ultimately constrain tree growth are poorly known. In addition to environmental constraints, the distribution of high elevation forests is largely affected by human influence. Andean Polylepis (Rosaceae) forests are an example of such a case, forests commonly growing in isolated stands disconnected from the lower elevation montane forests. There has been ample discussion as to the role of environmental versus anthropogenic causes of this fragmented distribution of Polylepis forests, but the importance of different factors is still unclear. In this thesis, I studied functional, environmental and anthropogenic aspects determining Polylepis forest distribution. Specifically, I assessed the degree of genetic determinism in the functional traits that enable Polylepis species to grow in cold and dry conditions. I also studied the role of environment and human influence constraining Polylepis forest distribution. I found evidence of genetically determined climatic adaptations in the functional traits of Polylepis. High elevation species had reduced leaf size and increased root tip abundance compared to low elevation species. Thus these traits have potentially played an important role in species evolution and adaptation to high elevation habitats, especially to low temperatures. I also found reduced photosynthesis rate among high elevation tree species compared to low elevation species, supporting carbon source limitation at treelines. At low elevations, Polylepis forest distribution appeared to be largely defined by human influence. This suggests that the absence of Polylepis forests in large areas in the Andes is the result of several environmental and anthropogenic constraints, the role of environment becoming stronger towards high elevations. I also show that Polylepis trees grow at remarkably low air and soil temperatures near treelines, and present new evidence of the role of air temperatures in constraining tree growth at high elevations. I further show that easily measurable indices of accessibility are related to the degree of degradation of Polylepis forest, and can therefore be used in the rapid identification of potentially degraded Polylepis forests. This is of great importance for the conservation and restoration planning of Polylepis forests in the Andes. In a global context, the results of this thesis add to our scientific knowledge concerning high elevation adaptations in trees, and increase our understanding of the factors constraining tree growth and forest distribution at high-­elevation treelines worldwide.

Characteristics of urban heat island (UHI) in a high latitude coastal city - a case study of Turku, SW Finland

The term urban heat island (UHI) refers to the common situation in which the city is warmer than its rural surroundings. In this dissertation, the local climate, and especially the UHI, of the coastal city of Turku (182,000 inh.), SW Finland, was studied in different spatial and temporal scales. The crucial aim was to sort out the urban, topographical and water body impact on temperatures at different seasons and times of the day. In addition, the impact of weather on spatiotemporal temperature differences was studied. The relative importance of environmental factors was estimated with different modelling approaches and a large number of explanatory variables with various spatial scales. The city centre is the warmest place in the Turku area. Temperature excess relative to the coldest sites, i.e. rural areas about 10 kilometers to the NE from the centre, is on average 2 °C. Occasionally, the UHI intensity can be even 10 °C. The UHI does not prevail continuously in the Turku area, but occasionally the city centre can be colder than its surroundings. Then the term urban cool island or urban cold island (UCI) is used. The UCI is most common in daytime in spring and in summer, whereas during winter the UHI prevails throughout the day. On average, the spatial temperature differences are largest in summer, whereas the single extreme values are often observed in winter. The seasonally varying sea temperature causes the shift of relatively warm areas towards the coast in autumn and inland in spring. In the long term, urban land use was concluded to be the most important factor causing spatial temperature differences in the Turku area. The impact was mainly a warming one. The impact of water bodies was emphasised in spring and autumn, when the water temperature was relatively cold and warm, respectively. The impact of topography was on average the weakest, and was seen mainly in proneness of relatively low-lying places for cold air drainage during night-time. During inversions, however, the impact of topography was emphasised, occasionally outperforming those of urban land use and water bodies.