Mobile Communications within the European Union: The Role of Location in the Evolution and Forecasting of the Diffusion Process

In the European Union, the importance of mobile communications was realized early on. The process of mobile communications becoming ubiquitous has taken time, as the innovation of mobile communications diffused into the society. The aim of this study is to find out how the evolution and spatial patterns of the diffusion of mobile communications within the European Union could be taken into account in forecasting the diffusion process. There is relatively lot of research of innovation diffusion on the individual (micro) andthe country (macro) level, if compared to the territorial level. Territorial orspatial diffusion refers either to the intra-country or inter-country diffusionof an innovation. In both settings, the dif- fusion of a technological innovation has gained scarce attention. This study adds knowledge of the diffusion between countries, focusing especially on the role of location in this process. The main findings of the study are the following: The penetration rates of the European Union member countries have become more even in the period of observation, from the year 1981 to 2000. The common digital GSM system seems to have hastened this process. As to the role of location in the diffusion process, neighboring countries have had similar diffusion processes. They can be grouped into three, the Nordic countries, the central and southern European countries, and the remote southern European countries. The neighborhood effect is also domi- nating in thegravity model which is used for modeling the adoption timing of the countries. The subsequent diffusion within a country, measured by the logistic model in Finland, is af- fected positively by its economic situation, and it seems to level off at some 92 %. Considering the launch of future mobile communications systemsusing a common standard should implicate an equal development between the countries. The launching time should be carefully selected as the diffusion is probably delayed in economic downturns. The location of a country, measured by distance, can be used in forecasting the adoption and diffusion. Fi- nally, the result of penetration rates becoming more even implies that in a relatively homoge- nous set of countries, such as the European Union member countries, the estimated final pene- tration of a single country can be used for approximating the penetration of the others. The estimated eventual penetration of Finland, some 92 %, should thus also be the eventual level for all the European Union countries and for the European Union as a whole.

Factors Affecting the Forecasting Accuracy of Diffusion Models

Tutkielman tavoitteena oli tarkastella innovaatioiden leviämismallien ennustetarkkuuteen vaikuttavia tekijöitä. Tutkielmassa ennustettiin logistisella mallilla matkapuhelinliittymien leviämistä kolmessa Euroopan maassa: Suomessa, Ranskassa ja Kreikassa. Teoriaosa keskittyi innovaatioiden leviämisen ennustamiseen leviämismallien avulla. Erityisesti painotettiin mallien ennustuskykyä ja niiden käytettävyyttä eri tilanteissa. Empiirisessä osassa keskityttiin ennustamiseen logistisella leviämismallilla, joka kalibroitiin eri tavoin koostetuilla aikasarjoilla. Näin tehtyjä ennusteita tarkasteltiin tiedon kokoamistasojen vaikutusten selvittämiseksi. Tutkimusasetelma oli empiirinen, mikä sisälsi logistisen leviämismallin ennustetarkkuuden tutkimista otosdatan kokoamistasoa muunnellen. Leviämismalliin syötettävä data voidaan kerätä kuukausittain ja operaattorikohtaisesti vaikuttamatta ennustetarkkuuteen. Dataan on sisällytettävä leviämiskäyrän käännöskohta, eli pitkän aikavälin huippukysyntäpiste.

Ulkoistettujen logistiikkapalveluiden kustannusrakenne ja säästöpotentiaali

Työ käsittelee ulkoistettujen logistiikkapalveluiden kustannusrakennetta sekä niiden mahdollista säästöpotentiaalia. Asetettu säästötavoite on kymmenen prosenttia. Logistiikkakustannukset muodostuvat pääpiirteissään ostorahdista, myyntirahdista, varastojen ja tuotantolaitoksen välisistä rahdeista sekä ulkopuolisilta toimijoilta vuokratuista varastoista. Työn teettävän yrityksen logistiikkakustannusten kustannusjakaumat tulee selvittää tekijöittäin perinpohjaisesti. Kustannustekijöiden määrittämisen jälkeen kustannukset on kohdistettu kullekin tekijälle yksitellen. Kustannustietojen osalta tutkimus kohdistui yrityksen omaan raportointiin, kirjanpitoon, palveluita tarjoavien toimijoiden laskutukseen sekä toimijoiden rahtien ja varastoinnin dokumentointeihin. Työn teoriaosuus pohjautuu tieteellisiin artikkeleihin ja kirjallisuuteen. Tutkimuskohteiden ja asetetun säästötavoitteen pohjalta on haarukoitu keinoja säästötavoitteen saavuttamiseksi. Kustannussäästöjä on haettu kahta eri reittiä pitkin. Ensimmäiseksi säästöjä haetaan organisaation oman toiminnan tehostamisella ja sitä kautta löytyvillä muutoksilla nykyiseen toimintamalliin nähden. Toinen tutkimuspolku on säästöjen hakeminen investointeja tekemällä. Oman toiminnan tehostamisen toimenpiteillä sekä investointeja tekemällä on mahdollista päästä asetettuun säästötavoitteeseen koskien yrityksen logistiikkakustannuksia.

Predicting bankruptcy of Finnish limited liability companies from historical financial statements

This master’s thesis studies the probability of bankruptcy of Finnish limited liability companies as a part of credit risk assessment. The main idea of this thesis is to build and test bankruptcy prediction models for Finnish limited liability companies that can be utilized in credit decision making. The data used in this thesis consists of historical financial statements from 2112 Finnish limited liability companies, half of which have filed for bankruptcy. A total of four models are developed, two with logistic regression and two with multivariate discriminant analysis (MDA). The time horizon of the models varies from 1 to 2 years prior to the bankruptcy, and 14 different financial variables are used in the model formation. The results show that the prediction accuracy of the models ranges between 81.7% and 88.9%, and the best prediction accuracy is achieved with the one year prior the bankruptcy logistic regression model. However the difference between the best logistic model and the best MDA model is minimal. Overall based on the results of this thesis it can be concluded that predicting bankruptcy is possible to some extent, but naturally the results are not perfect.

Palveluruokamarkkinoiden innovatiivisen toimintamallin suunnittelu

Diplomityön tavoitteena on ollut kehittää elintarvikeyrityksen palveluruokamarkkinoille uusi innovatiivinen toimintamalli haastattelujen, havainnoinnin ja kirjallisuuden perusteella. Tutkimusongelman päätutkimuskysymys on: Miten yrityksen palveluruoka- eli valmisruokatuotteille suunnitellaan innovatiivinen toimintamalli tuoteperheen ja jakelun suhteen? Tavoitteena on kartoittaa yrityksen palveluruoan nykytilanne ja luoda toimintamalli, joka toisi yritykselle selkeää lisäarvoa ja kilpailuetua. Teoreettisessa osuudessa selvitetään elintarviketeollisuuden, valmisruoan ja elintarvikelogistiikan tilannetta suomalaisesta ja globaalista näkökulmasta. Työssä on tarkasteltu elintarvikepuolen nykytilannetta ja tulevaisuuden suuntauksia tuotteiden, ruokailutottumusten ja logistiikan osalta. Innovaatioiden osalta työ painottuu palveluruokapuolen konseptin ja uuden logistisen yhteistyöhön pohjautuvan mallin kehittämiseen. Työn käytännön osiossa on tehty case-tutkimus ”yrityksen palveluruoan nykytilanne tuotteiden ja logistiikan osalta”. Toimialan markkinatilannetta on kartoitettu, jotta hahmotetaan, missä on potentiaalisimmat markkinat palveluruoalle. Työn tavoitteena on ollut kehittää Hoviruoka Oy:lle palveluruoan segmentointiin ja logistiikkaan liittyvä innovatiivinen toimintamalli. Toimintamallin avulla yritys saa kilpailuetua ja taloudellista hyötyä kilpailijoihin nähden, ja on edelläkävijä kyseisen toimintamallin ansiosta. Työn tuloksissa on käsitelty keskeiset tulokset ja mahdolliset jatkotoimenpiteet. Työssä kehitettiin yritykselle uusi toimintamalli palveluruoka puolelle. Työlle asetetut tavoitteet saavutettiin kaikkien kolmen - tekijän, yliopiston ja yrityksen - kannalta.

Intelligence acquisition methods in cyber domain : examining the circumstantial applicability of cyber intelligence acquisition methods using a hierarchical model

Phenomena in cyber domain, especially threats to security and privacy, have proven an increasingly heated topic addressed by different writers and scholars at an increasing pace – both nationally and internationally. However little public research has been done on the subject of cyber intelligence. The main research question of the thesis was: To what extent is the applicability of cyber intelligence acquisition methods circumstantial? The study was conducted in sequential a manner, starting with defining the concept of intelligence in cyber domain and identifying its key attributes, followed by identifying the range of intelligence methods in cyber domain, criteria influencing their applicability, and types of operatives utilizing cyber intelligence. The methods and criteria were refined into a hierarchical model. The existing conceptions of cyber intelligence were mapped through an extensive literature study on a wide variety of sources. The established understanding was further developed through 15 semi-structured interviews with experts of different backgrounds, whose wide range of points of view proved to substantially enhance the perspective on the subject. Four of the interviewed experts participated in a relatively extensive survey based on the constructed hierarchical model on cyber intelligence that was formulated in to an AHP hierarchy and executed in the Expert Choice Comparion online application. It was concluded that Intelligence in cyber domain is an endorsing, cross-cutting intelligence discipline that adds value to all aspects of conventional intelligence and furthermore that it bears a substantial amount of characteristic traits – both advantageous and disadvantageous – and furthermore that the applicability of cyber intelligence methods is partly circumstantially limited.

Mechanistic population Models in Biology: Model Derivation and Application

In general, models of ecological systems can be broadly categorized as ’top-down’ or ’bottom-up’ models, based on the hierarchical level that the model processes are formulated on. The structure of a top-down, also known as phenomenological, population model can be interpreted in terms of population characteristics, but it typically lacks an interpretation on a more basic level. In contrast, bottom-up, also known as mechanistic, population models are derived from assumptions and processes on a more basic level, which allows interpretation of the model parameters in terms of individual behavior. Both approaches, phenomenological and mechanistic modelling, can have their advantages and disadvantages in different situations. However, mechanistically derived models might be better at capturing the properties of the system at hand, and thus give more accurate predictions. In particular, when models are used for evolutionary studies, mechanistic models are more appropriate, since natural selection takes place on the individual level, and in mechanistic models the direct connection between model parameters and individual properties has already been established. The purpose of this thesis is twofold. Firstly, a systematical way to derive mechanistic discrete-time population models is presented. The derivation is based on combining explicitly modelled, continuous processes on the individual level within a reproductive period with a discrete-time maturation process between reproductive periods. Secondly, as an example of how evolutionary studies can be carried out in mechanistic models, the evolution of the timing of reproduction is investigated. Thus, these two lines of research, derivation of mechanistic population models and evolutionary studies, are complementary to each other.

Wood as a model material for medical biomaterials. In vivo and in vitro studies with bone and Betula pubescens Ehrh

Novel biomaterials are needed to fill the demand of tailored bone substitutes required by an ever‐expanding array of surgical procedures and techniques. Wood, a natural fiber composite, modified with heat treatment to alter its composition, may provide a novel approach to the further development of hierarchically structured biomaterials. The suitability of wood as a model biomaterial as well as the effects of heat treatment on the osteoconductivity of wood was studied by placing untreated and heat‐treated (at 220 C , 200 degrees and 140 degrees for 2 h) birch implants (size 4 x 7mm) into drill cavities in the distal femur of rabbits. The follow‐up period was 4, 8 and 20 weeks in all in vivo experiments. The flexural properties of wood as well as dimensional changes and hydroxyl apatite formation on the surface of wood (untreated, 140 degrees C and 200 degrees C heat‐treated wood) were tested using 3‐point bending and compression tests and immersion in simulated body fluid. The effect of premeasurement grinding and the effect of heat treatment on the surface roughness and contour of wood were tested with contact stylus and non‐contact profilometry. The effects of heat treatment of wood on its interactions with biological fluids was assessed using two different test media and real human blood in liquid penetration tests. The results of the in vivo experiments showed implanted wood to be well tolerated, with no implants rejected due to foreign body reactions. Heat treatment had significant effects on the biocompatibility of wood, allowing host bone to grow into tight contact with the implant, with occasional bone ingrowth into the channels of the wood implant. The results of the liquid immersion experiments showed hydroxyl apatite formation only in the most extensively heat‐treated wood specimens, which supported the results of the in vivo experiments. Parallel conclusions could be drawn based on the results of the liquid penetration test where human blood had the most favorable interaction with the most extensively heat‐treated wood of the compared materials (untreated, 140 degrees C and 200 degrees C heat‐treated wood). The increasing biocompatibility was inferred to result mainly from changes in the chemical composition of wood induced by the heat treatment, namely the altered arrangement and concentrations of functional chemical groups. However, the influence of microscopic changes in the cell walls, surface roughness and contour cannot be totally excluded. The heat treatment was hypothesized to produce a functional change in the liquid distribution within wood, which could have biological relevance. It was concluded that the highly evolved hierarchical anatomy of wood could yield information for the future development of bulk bone substitutes according to the ideology of bioinspiration. Furthermore, the results of the biomechanical tests established that heat treatment alters various biologically relevant mechanical properties of wood, thus expanding the possibilities of wood as a model material, which could include e.g. scaffold applications, bulk bone applications and serving as a tool for both mechanical testing and for further development of synthetic fiber reinforced composites.

Integration of existing military capability models into the Comprehensive Capability Meta-model

Abstract—This paper discusses existing military capability models and proposes a comprehensive capability meta-model (CCMM) which unites the existing capability models into an integrated and hierarchical whole. The Zachman Framework for Enterprise Architecture is used as a structure for the CCMM. The CCMM takes into account the abstraction level, the primary area of application, stakeholders, intrinsic process, and life cycle considerations of each existing capability model, and shows how the models relate to each other. The validity of the CCMM was verified through a survey of subject matter experts. The results suggest that the CCMM is of practical value to various capability stakeholders in many ways, such as helping to improve communication between the different capability communities.

Container logistic innovations in forest-energy sector: Markets, future service concepts and technical improvements

The report presents the results of the commercialization project called the Container logistic services for forest bioenergy. The project promotes new business that is emerging around overall container logistic services in the bioenergy sector. The results assess the European markets of the container logistics for biomass, enablers for new business creation and required service bundles for the concept. We also demonstrate the customer value of the container logistic services for different market segments. The concept analysis is based on concept mapping, quality function deployment process (QFD) and business network analysis. The business network analysis assesses key shareholders and their mutual connections. The performance of the roadside chipping chain is analysed by the logistic cost simulation, RFID system demonstration and freezing tests. The EU has set the renewable energy target to 20 % in 2020 of which Biomass could account for two-thirds. In the Europe, the production of wood fuels was 132.9 million solid-m3 in 2012 and production of wood chips and particles was 69.0 million solidm3. The wood-based chips and particle flows are suitable for container transportation providing market of 180.6 million loose- m3 which mean 4.5 million container loads per year. The intermodal logistics of trucks and trains are promising for the composite containers because the biomass does not freeze onto the inner surfaces in the unloading situations. The overall service concept includes several packages: container rental, container maintenance, terminal services, RFID-tracking service, and simulation and ERP-integration service. The container rental and maintenance would provide transportation entrepreneurs a way to increase the capacity without high investment costs. The RFID-concept would lead to better work planning improving profitability throughout the logistic chain and simulation supports fuel supply optimization.