Comprehensive Study of Crystal Growth from Solution

Crystal growth is an essential phase in crystallization kinetics. The rate of crystal growth provides significant information for the design and control of crystallization processes; nevertheless, obtaining accurate growth rate data is still challenging due to a number of factors that prevail in crystal growth. In industrial crystallization, crystals are generally grown from multi-componentand multi-particle solutions under complicated hydrodynamic conditions; thus, it is crucial to increase the general understanding of the growth kinetics in these systems. The aim of this work is to develop a model of the crystal growth rate from solution. An extensive literature review of crystal growth focuses on themodelling of growth kinetics and thermodynamics, and new measuring techniques that have been introduced in the field of crystallization. The growth of a singlecrystal is investigated in binary and ternary systems. The binary system consists of potassium dihydrogen phosphate (KDP, crystallizing solute) and water (solvent), and the ternary system includes KDP, water and an organic admixture. The studied admixtures, urea, ethanol and 1-propanol, are employed at relatively highconcentrations (of up to 5.0 molal). The influence of the admixtures on the solution thermodynamics is studied using the Pitzer activity coefficient model. Theprediction method of the ternary solubility in the studied systems is introduced and verified. The growth rate of the KDP (101) face in the studied systems aremeasured in the growth cell as a function of supersaturation, the admixture concentration, the solution velocity over a crystal and temperature. In addition, the surface morphology of the KDP (101) face is studied using ex situ atomic force microscopy (AFM). The crystal growth rate in the ternary systems is modelled on the basis of the two-step growth model that contains the Maxwell-Stefan (MS) equations and a surface-reaction model. This model is used together with measuredcrystal growth rate data to develop a new method for the evaluation of the model parameters. The validation of the model is justified with experiments. The crystal growth rate in an imperfectly mixed suspension crystallizer is investigatedusing computational fluid dynamics (CFD). A solid-liquid suspension flow that includes multi-sized particles is described by the multi-fluid model as well as by a standard k-epsilon turbulence model and an interface momentum transfer model. The local crystal growth rate is determined from calculated flow information in a diffusion-controlled crystal growth regime. The calculated results are evaluated experimentally.

Measurement of the tree root growth using electrical impedance spectroscopy

Abstract

Selecting, testing and modifying a model for identifying potential key customers

Tämä työ tehtiin globaaliin elektroniikka-alan yritykseen. Diplomityö liittyy haasteeseen, jonka lisääntynyt globalisaatio ja kiristyvä kilpailu ovat luoneet: case yrityksen on selvitettävä kuinka se voi saavuttaa kasvutavoitteet myös tulevaisuudessa hankkimalla uusia asiakkaita ja olemalla yhä enenevissä määrin maailmanlaajuisesti läsnä. Tutkimuksen tavoite oli löytää sopiva malli potentiaalisten avainasiakkaiden identifiointiin ja valintaan, sekä testata ja modifioida valittua mallia case yrityksen tarpeiden mukaisesti. Erityisesti raakadatan kerääminen, asiakkaiden houkuttelevuuskriteerit ja kohdemarkkinarako olivat asioita, jotka tarvitsivat tutkimuksessa huomiota. Kirjallisuuskatsauksessa keskityttiin yritysmarkkinoihin, eri asiakassuhteenhallinnan lähestymistapoihin ja avainasiakkaiden määrittämiseen. CRM:n, KAM:n ja Customer Insight-ajattelun perusteet esiteltiin yhdessä eri avainasiakkaiden identifiointimallien kanssa. Valittua Chevertonin mallia testattiin ja muokattiin työn empiirisessä osassa. Tutkimuksen empiirinen kontribuutio on modifioitu malli potentiaalisten avainasiakkaiden identifiointiin. Se auttaa päätöksentekijöitä etenemään systemaattisesti ja organisoidusti askel askeleelta kohti potentiaalisten asiakkaiden listaa tietyltä markkina-alueelta. Työ tarjoaa työkalun tähän prosessiin sekä luo pohjaa tulevaisuuden tutkimukselle ja toimenpiteille.

Borrelia burgdorferi evades the effects of ceftriaxone treatment in a mouse model of Lyme borreliosis

Borrelia burgdorferi infektoitujen hiirten antibioottihoidon jälkeinen oireilu Lymen borrelioosi on puutiaisten välittämä monimuotoinen infektiotauti, jonka tunnetuin oire on ns. vaeltava ihottuma eli erythema migrans. Muita tavallisia ilmentymiä ovat erityisesti nivel- ja hermosto-oireet sekä harvemmin sydän- ja silmäoireet. Suurin osa potilaista paranee täysin terveeksi antibioottihoidon avulla, mutta jopa 10 % borrelioosiin sairastuneista oireilee suositusten mukaisesta hoidosta huolimatta. Pitkittyneen oireilun on ajateltu johtuvan mm. infektion laukaisemasta autoimmuunitaudista tai kroonisesta infektiosta, mutta teorioiden tueksi ei ole kyetty esittämään kiistattomia todisteita. Onkin todennäköistä, että antibioottihoidon jälkeisen oireilun takana on useampia mekanismeja eikä yksi teoria selitä kaikkien potilaiden oireilua. Tässä väitöskirjatyössä on tutkittu hoidonjälkeistä borrelioosia hiirimallin avulla. Varhaisvaiheessa (2 viikkoa infektoinnin jälkeen) annettu antibiootti vähensi hiirten nivelturvotusta ja esti B. burgdorferi – bakteerin kasvun kudoksista otetuista näytteissä. Hoidettu¬jen hiirten B. burgdorferi -spesifiset IgG-luokan vasta-aineet pysyivät kuitenkin koholla ja osasta kudosnäytteistä löytyi B. burgdorferi:n DNA:ta PCR-tutkimuksen avulla. Mikäli hiiret hoidettiin myöhäisessä vaiheessa (yli 18 viikkoa infektoinnista) tulokset olivat muuten samanlaiset, mutta keftriaksoni ei vaikuttanut nivelturvotukseen. Näin hiirissä oli aikaansaatu tilanne, joka on hyvin samankaltainen ihmisen hoitoresistentin borrelia-artriitin kanssa: oireet jatkuvat, mutta taudinaiheuttajaa ei saada esiin. Inflammaatiota vaimentavaa anti-TNF-alphaa on käytetty nivelreuman hoidossa menestyksekkäästi huonosti muuhun hoitoon reagoivilla potilailla ja siitä syystä sen ajateltiin voivan vaikuttaa suotuisasti myös B. burgdorferi -infektoitujen hiirten hoidonjälkeiseen nivelturvotukseen. Sillä ei kuitenkaan ollut vaikutusta nivelturvotukseen, mutta yllättäen hoidon jälkeen osa hiirten kudosnäytteistä osoittautui viljelypositiivisiksi. On siis ilmeistä, että hiirimallissamme osa B. burgdorferi spirokeetoista pystyy välttämään keftriaksonihoidon vaikutuksen joko hakeutumalla elimistössä kudokseen, jossa antibiootin pitoisuus ei nouse riittävän korkeaksi, tai ne kykenevät muuntautumaan metabolisesti inaktiiviin tilaan eikä mikrobilääke yhdessä immuunipuolustuksen kanssa onnistu tappamaan niitä. Jatkotutkimuksissa selvitimme B. burgdorferi - spirokeetan mahdollista piilopaikkaa tutkimalla antibioottihoidon jälkeen useita eri kudoksia PCR-menetelmällä. Tulosten perusteella spirokeetta näyttää suosivan nivelkudosta tai soluja, joita esiintyy nivelessä runsaasti. On kuitenkin edelleen epäselvää, missä muodossa B. burgdorferi –spirokeetat säilyvät kudoksessa antibioottihoidon jälkeen.

A Practical Micro Mechanical Model Based Local Approach Methodology for the Analysis of Ductile Fracture of Welded T-Joints

This thesis concentrates on developing a practical local approach methodology based on micro mechanical models for the analysis of ductile fracture of welded joints. Two major problems involved in the local approach, namely the dilational constitutive relation reflecting the softening behaviour of material, and the failure criterion associated with the constitutive equation, have been studied in detail. Firstly, considerable efforts were made on the numerical integration and computer implementation for the non trivial dilational Gurson Tvergaard model. Considering the weaknesses of the widely used Euler forward integration algorithms, a family of generalized mid point algorithms is proposed for the Gurson Tvergaard model. Correspondingly, based on the decomposition of stresses into hydrostatic and deviatoric parts, an explicit seven parameter expression for the consistent tangent moduli of the algorithms is presented. This explicit formula avoids any matrix inversion during numerical iteration and thus greatly facilitates the computer implementation of the algorithms and increase the efficiency of the code. The accuracy of the proposed algorithms and other conventional algorithms has been assessed in a systematic manner in order to highlight the best algorithm for this study. The accurate and efficient performance of present finite element implementation of the proposed algorithms has been demonstrated by various numerical examples. It has been found that the true mid point algorithm (a = 0.5) is the most accurate one when the deviatoric strain increment is radial to the yield surface and it is very important to use the consistent tangent moduli in the Newton iteration procedure. Secondly, an assessment of the consistency of current local failure criteria for ductile fracture, the critical void growth criterion, the constant critical void volume fraction criterion and Thomason's plastic limit load failure criterion, has been made. Significant differences in the predictions of ductility by the three criteria were found. By assuming the void grows spherically and using the void volume fraction from the Gurson Tvergaard model to calculate the current void matrix geometry, Thomason's failure criterion has been modified and a new failure criterion for the Gurson Tvergaard model is presented. Comparison with Koplik and Needleman's finite element results shows that the new failure criterion is fairly accurate indeed. A novel feature of the new failure criterion is that a mechanism for void coalescence is incorporated into the constitutive model. Hence the material failure is a natural result of the development of macroscopic plastic flow and the microscopic internal necking mechanism. By the new failure criterion, the critical void volume fraction is not a material constant and the initial void volume fraction and/or void nucleation parameters essentially control the material failure. This feature is very desirable and makes the numerical calibration of void nucleation parameters(s) possible and physically sound. Thirdly, a local approach methodology based on the above two major contributions has been built up in ABAQUS via the user material subroutine UMAT and applied to welded T joints. By using the void nucleation parameters calibrated from simple smooth and notched specimens, it was found that the fracture behaviour of the welded T joints can be well predicted using present methodology. This application has shown how the damage parameters of both base material and heat affected zone (HAZ) material can be obtained in a step by step manner and how useful and capable the local approach methodology is in the analysis of fracture behaviour and crack development as well as structural integrity assessment of practical problems where non homogeneous materials are involved. Finally, a procedure for the possible engineering application of the present methodology is suggested and discussed.

Orthotopic PC-3 Tumor Xenografts in Studies on Prostate Cancer Growth and Metastasis

Prostate cancer is generally a slowly developing disease. However, some cancers develop into an aggressive, metastasic and consequently life-threatening state. The mechanisms of prostate cancer spread are still mainly unidentified but hormones and growth factors are known to been involved. The forming of new blood vessels i.e. angiogenesis is crucial for tumor growth. Blood vessels and lymphatic vessels are also prominent routes for metastasis. Both angiogenic and lymphangiogenic factors are overexpressed in prostate cancer. We established an in vivo model to study the factors effecting human prostate cancer growth and metastasis. Tumors were produced by the orthotopic inoculation of PC-3 prostate cancer cells into the prostates of immunodeficient mice. Like human prostate tumors, these tumors metastasized to prostate-draining lymph nodes. Treatment of the mice with the bisphosphonate alendronate known to decrease prostate cancer cell invasion in vitro inhibited metastasis and decreased tumor growth. Decreased tumor growth was associated with decreased angiogenesis and increased apoptosis of tumor cells. To elucidate the role of angiogenesis in prostate cancer progression, we studied the growth of orthotopic PC-3 tumors overexpressing fibroblast growth factor b (FGF8b) known to be expressed in human prostate cancer. FGF8b increased tumor growth and angiogenesis, which were both associated with a characteristic gene expression pattern. To study the role of lymphangiogenesis, we produced orthotopic PC-3 tumors overexpressing vascular endothelial growth factor C (VEGF-C). Blocking of VEGF-C receptor (VEGFR3) completely inhibited lymph node metastasis whereas overexpression of VEGF-C increased tumor growth and angiogenesis. VEGF-C also increased lung metastases but, surprisingly, decreased spread to lymph nodes. This suggests that the expanded vascular network was primarily used as a route for tumor spreading. Finally, the functionality of the capillary network in subcutaneous FGF8b-overexpressing PC-3 tumors was compared to that of tumors overexpressing VEGF. Both tumors showed angiogenic morphology and grew faster than control tumors. However, FGF8b tumors were hypoxic and their perfusion and oxygenation was poor compared with VEGF tumors. This suggests that the growth advantage of FGF8b tumors is more likely due to stimulated proliferation than effective angiogenesis. In conclusion, these results show that orthotopic prostate tumors provide a useful model to explore the mechanisms of prostate cancer growth and metastasis.

Demographic Modelling of Human Population Growth

This work presents models and methods that have been used in producing forecasts of population growth. The work is intended to emphasize the reliability bounds of the model forecasts. Leslie model and various versions of logistic population models are presented. References to literature and several studies are given. A lot of relevant methodology has been developed in biological sciences. The Leslie modelling approach involves the use of current trends in mortality,fertility, migration and emigration. The model treats population divided in age groups and the model is given as a recursive system. Other group of models is based on straightforward extrapolation of census data. Trajectories of simple exponential growth function and logistic models are used to produce the forecast. The work presents the basics of Leslie type modelling and the logistic models, including multi- parameter logistic functions. The latter model is also analysed from model reliability point of view. Bayesian approach and MCMC method are used to create error bounds of the model predictions.

Effects of Foreign Direct Investment inflows on growth in Central and Eastern European transition countries

The aim of this master’s thesis is to analyze the effects of Foreign Direct Investments on growth in selected Central and Eastern European transition countries. The theoretical part of this thesis, introduces growth theories and how FDI is covered in those theories. In addition, the results from previous studies, which have studied FDI’s effect on growth, are presented in this master’s thesis. This work introduces also the economical progress during the transition period in selected countries. In the empirical part’s regression model, it will be searched for the direct effect of FDI on growth with panel data collected from nine transition countries.

Growth through internationalization of Russian SMEs in Finland

The study examines Russian SMEs motives, needs, prospects and constrains to enter Finland through Lappeenranta. Russian entrepreneurship is a young phenomenon in Finland. The present research becomes a first guide in understanding of Russian SMEs’ capabilities for establishing their subsidiaries in Finland. The extensive model of different theoretical approaches was created for evaluating Russian SMEs growth and internationalization opportunities. The findings of the research indicated that Russian growing companies chose the internationalization to continue their development. Many Finland’ positive conditions were evaluated as important for the Russian entrepreneurship. Finland was the first European country of the expansion to the European Union, for the Russian SMEs established the subsidiaries in Lappeenranta. Their motives for entering Finland were usually based on market and resource views. Generally, the Russian SMEs establish a new company in Finland only when they have sufficient capabilities and resources for internationalization. Entering Finland the Russian firms make better the allocation of their natural, financial and human resources.