Origins of production errors and significance of employee empowerment in reducing production error amount in sheet metal fabricating industry

The market place of the twenty-first century will demand that manufacturing assumes a crucial role in a new competitive field. Two potential resources in the area of manufacturing are advanced manufacturing technology (AMT) and empowered employees. Surveys in Finland have shown the need to invest in the new AMT in the Finnish sheet metal industry in the 1990's. In this run the focus has been on hard technology and less attention is paid to the utilization of human resources. In manymanufacturing companies an appreciable portion of the profit within reach is wasted due to poor quality of planning and workmanship. The production flow production error distribution of the sheet metal part based constructions is inspectedin this thesis. The objective of the thesis is to analyze the origins of production errors in the production flow of sheet metal based constructions. Also the employee empowerment is investigated in theory and the meaning of the employee empowerment in reducing the overall production error amount is discussed in this thesis. This study is most relevant to the sheet metal part fabricating industrywhich produces sheet metal part based constructions for electronics and telecommunication industry. This study concentrates on the manufacturing function of a company and is based on a field study carried out in five Finnish case factories. In each studied case factory the most delicate work phases for production errors were detected. It can be assumed that most of the production errors are caused in manually operated work phases and in mass production work phases. However, no common theme in collected production error data for production error distribution in the production flow can be found. Most important finding was still that most of the production errors in each case factory studied belong to the 'human activity based errors-category'. This result indicates that most of the problemsin the production flow are related to employees or work organization. Development activities must therefore be focused to the development of employee skills orto the development of work organization. Employee empowerment gives the right tools and methods to achieve this.

Validation of plant dynamic model by online and laboratory measurements – a tool to predict online COD loads out of production of mechanical printing papers

COD discharges out of processes have increased in line with elevating brightness demands for mechanical pulp and papers. The share of lignin-like substances in COD discharges is on average 75%. In this thesis, a plant dynamic model was created and validated as a means to predict COD loading and discharges out of a mill. The assays were carried out in one paper mill integrate producing mechanical printing papers. The objective in the modeling of plant dynamics was to predict day averages of COD load and discharges out of mills. This means that online data, like 1) the level of large storage towers of pulp and white water 2) pulp dosages, 3) production rates and 4) internal white water flows and discharges were used to create transients into the balances of solids and white water, referred to as “plant dynamics”. A conversion coefficient was verified between TOC and COD. The conversion coefficient was used for predicting the flows from TOC to COD to the waste water treatment plant. The COD load was modeled with similar uncertainty as in reference TOC sampling. The water balance of waste water treatment was validated by the reference concentration of COD. The difference of COD predictions against references was within the same deviation of TOC-predictions. The modeled yield losses and retention values of TOC in pulping and bleaching processes and the modeled fixing of colloidal TOC to solids between the pulping plant and the aeration basin in the waste water treatment plant were similar to references presented in literature. The valid water balances of the waste water treatment plant and the reduction model of lignin-like substances produced a valid prediction of COD discharges out of the mill. A 30% increase in the release of lignin-like substances in the form of production problems was observed in pulping and bleaching processes. The same increase was observed in COD discharges out of waste water treatment. In the prediction of annual COD discharge, it was noticed that the reduction of lignin has a wide deviation from year to year and from one mill to another. This made it difficult to compare the parameters of COD discharges validated in plant dynamic simulation with another mill producing mechanical printing papers. However, a trend of moving from unbleached towards high-brightness TMP in COD discharges was valid.

“That you too were the I”: Forms of polyphonic communication in John Ashbery’s poetry

Tarkastelen tutkimuksessani amerikkalaisen John Ashberyn (1927–) runoudessa lmenevää moniäänisyyttä. Runoutta pidetään yleensä yksiäänisenä puheena, kun taas omaanin ajatellaan erityisesti Mihail Bahtinin vaikutuksesta olevan luonnostaan oniääninen kirjallisuudenlaji. Ashberyn postmoderni runous haastaa tämän äsityksen. Ashbery tunnetaan vakiintuneita runouskäsityksiä vastaan kirjoittavana avantgarde-runoilijana. Pääasiallisina tutkimuskohteinani ovat Ashberyn pitkä runoelma nimeltä ”Litany” (1979) sekä lyhyiden runojen valikoima Your Name Here (2000). Vertailukohtana tarkastelen Ashberyn yhdessä James Schuylerin kanssa kirjoittamaa romaania A Nest of Ninnies (1969). Teoreettisena pohjana on käytetty Ashberyä käsittelevän muun tutkimuksen lisäksi muun muassa jälkistrukturalistisiin teorioihin liittyviä ajatuksia pronominien vaikutuksesta siihen miten lukija muodostaa käsityksen subjektiivisesta läsnäolosta runossa. Ashbery käyttää persoonapronomineja ilman selkeitä viittaussuhteita. Viittaussuhteiden hämärtymisen ja fragmentaarisuuden vuoksi Ashberyn runoja pidetään usein vaikeina, eikä niistä ole helppo löytää yhtä selkeää aihetta. Hajanaisuus on kuitenkin motivoitua, koska juuri se mahdollistaa moniäänisyyden ja avoimen tekstin, joka voi sisältää monia merkityksiä. Kun runossa ei ole yhden puhujan hallitsevaa ääntä, lukijan rooli merkitysten muodostajana nousee keskeiseksi. ”Litany” on selkeästi metatekstuaalinen runo, jossa fiktiivinen taso sekoittuu runouden, taiteen ja kritiikin mahdollisuuksien pohdintaan. Runo hahmottelee uudenlaista, moniäänistä teorian ja runouden rajoja purkavaa kommunikaation muotoa. Toisen persoonan pronominien voidaan runossa usein ajatella puhuttelevan lukijaa. Your Name Here -kokoelmassa puolestaan toisen persoonan pronominipositiot määrittyvät usein tietyiksi henkilöhahmoiksi runojen maailmassa, ja pronominipositioiden kautta runoissa rakentuu moniäänisiä dialogeja määrittymättömien henkilöhahmojen välille. Näin lukijan huomio suunnataan ensisijaisesti kommunikaation ja arkipäivän kielenkäytön kliseiden sävyihin ja asiayhteyksiin pikemminkin kuin yksittäisten lausumien sisältöön. A Nest of Ninnies -romaani toimii näennäisestä dialogisuudestaan huolimatta ennen kaikkea yksiäänisesti, sillä romaanin yksiulotteisten henkilöhahmojen esittämiä ajatuksia hallitsee parodioimaan pyrkivä kertojanääni. Ashberyn runojen ja romaanin tarkasteleminen osoittaa, että käsitys runoudesta väistämättä yksiäänisenä ja romaanista moniäänisenä ei ole kaikilta osin ongelmaton. Moniääninen, monimerkityksinen runo voi tarjota toiselle itsenäisen aseman.

On the effects of new forms of foreign aid

-

Reinventing the third way : towards new forms of economic and democratic conduct

Avhandlingen studerar samspelet mellan det politiska och det ekonomiska systemet genom det föregående seklet, med speciellt fokus på den nyliberala omdaning som utspelats de senaste tre årtiondena. Med en liberaliserad ekonomi och en individualiserad människa måste också det politiska systemet utformas på ett annat sätt. Gradvisa förändringar har varit synliga, som den växande nätverksorganiseringen, dvs. att olika typer av utvecklingspolitik allt mer genomförs som ett samspel mellan samhällssektorerna, istället för att enbart utföras av den offentliga sektorn som tidigare. Genom fyra fallstudier i Österbotten demonstreras hur arenor för samverkan kan konstrueras i enlighet med vad den aktuella frågan kräver. Ett exempel är det innovationsnätverk som skapats i Karleby-Jakobstad-regionen, där offentliga och privata intressenter deltar, och som samtidigt bryter traditionella administrativa gränser. Ett annat mer negativt exempel är omstruktureringsprocessen i Kaskö-regionen eft er Metsä-Botnia-fabrikens nedläggning, där småkommunproblemet tillsammans med att den privata intressenten inte haft skyldighet att samverka lett till att en tillräckligt regionalt förankrad arena för en långsiktig utvecklingspolitik inte har kunnat skapas. Det här visar på trögheten i det finska systemet, där en stark enhetsstat och en splittrad kommunal nivå ur ett historiskt perspektiv hindrat flexibla anpassningar till samhällsförändringar. Avhandlingen visar att nätverksorganiseringen bör vara en integrerad del av de representativa strukturerna för att kunna påverka processernas utfall. Avhandlingen visar framförallt att deltagande och funktionellt definierade regionala och lokala arenor har stor potential, både ekonomiskt och demokratiskt. Det handlar om att skapa en kultur med aktiverade och engagerade medborgare, vilket står i kontrast till det allt mer passiverande representativa systemet. ---------------------------------------- Väitöskirja tutkii viime vuosisadan poliittisen ja taloudellisen järjestelmän vuorovaikutusta keskittyen erityisesti kolmen viimeisen vuosikymmenen uusliberaaliseen muutokseen. Talouden liberalisoituminen ja ihmisen individualisoituminen edellyttävät myös poliittisen järjestelmän mukautumista. Asteittaisia muutoksia on ollut havaittavissa, kuten kasvava verkosto-organisaatio, toisin sanoen eri alojen kehityspolitiikkaa toteutetaan yhä enemmän eri yhteiskuntasektoreiden vuorovaikutuksena, kun aikaisemmin ainoastaan julkinen sektori vastasi kehityspolitiikan toteuttamisesta. Pohjanmaan maakunnan neljän tapaustutkimuksen avulla osoitetaan, miten vuorovaikutusareena voidaan rakentaa kulloinkin ajankohtaisen asiakokonaisuuden ympärille. Tästä esimerkkinä on Kokkola-Pietarsaari –alueen innovaatioverkosto, johon osallistuvat sekä julkiset että yksityiset sidosryhmät ja joka samalla rikkoo perinteisiä hallinnollisia rajoja. Toinen, kielteisempi esimerkki on Kaskisten alueen rakennemu utosprosessi Metsä-Botnian tehtaan sulkemisen jälkeen. Siellä pienkuntaongelma yhdistettynä siihen, että yksityinen sidosryhmä ei ole ollut velvollinen tekemään yhteistyötä, on johtanut siihen, että ei ole kyetty luomaan alueen pitkäaikaiseen kehittämiseen sitoutunutta vuorovaikutusareenaa. Tämä osoittaa suomalaisen järjestelmän kankeuden, jossa historiallisesta näkökulmasta vahva yhtenäinen valtio ja hajanainen kuntataso estävät joustavan yhteiskuntamuutoksiin sopeutumisen. Väitöskirja osoittaa, että verkosto-organisaation on oltava yhteiskunnassa vaikuttaviin rakenteisiin integroitu osa, jotta se voi vaikuttaa prosessien tuloksiin. Väitöskirja osoittaa ennen kaikkea, että osallistuvilla ja toiminnallisesti määritellyillä alueellisilla ja paikallisilla areenoilla on suuri taloudellinen ja demokraattinen potentiaali. Passivoivan edustavan järjestelmän tilalle on luotava aktiivisten ja tavoitteisiin sitoutuneiden kansalaisten vuorovaikutusjärjestelmä.

Twelve "daughters of Herodias" in as many forms of dress: famous Salomes and their costumes

Kollaasi Salomea esittäneistä oopperalaulajista: Henny Dima, Josephine von Hubbenet, Fanchette Verhunk, Signe von Rappe, Mme. Isnardon, Agnes Klebe, Malvine Kann, Kruszelnicka, Aino Ackté, Emma Destinn, Anna Sutter, Thyra Larsen.

Refocusing regulatory exclusivities: Regulatory data protection and marketing exclusivity as forms of pharmaceutical innovation policy

Protection of innovation in the pharmaceutical industry has traditionally been realised through protection of inventions via patents. However, in the European Union regulatory exclusivities restricting market entry of generic products confer tailored, industry specific protection for final, marketable products. This paper retraces the protection conferred by the different forms of exclusivity and assesses them in the light of recent transparency policies of the European Medicines Agency. The purpose of the paper is to argue for rethinking the role of regulatory data as a key tool of innovation policy and for refocusing the attention from patents to the existing regulatory framework. After detailed assessment of the exclusivity regime, the paper identifies key areas of improvement calling for reassessment so as to promote better functioning of the regime as an incentive for accelerated innovation. While economic and public health analysis necessarily provide final answers as to necessity of reform, this paper provides a legal perspective to the issue, appraising the current regulatory framework and identifying areas for further analysis.

Distribution systems of the food sector in Russia: the perspective of Finnish food industry

Finnish food producers' trade with Russia has experienced profound changes since the collapse of the Soviet Union. Simultaneously, the distribution systems of foodstuffs have changed remarkably. This study sheds some light into these changes and analyses the current situation in distribution systems of foodstuffs in Russia. In addition, the study discusses the possibilities of Finnish food producers to get more of their products to the shelves of Russian food retail stores. Before the 1998 financial crisis, the import of foreign foodstuffs was booming in Russia due to the overvalued rouble. As a result of the financial crisis, food import collapsed. The export of Finnish foodstuffs to Russia has been slowly recovering during the past few years, but in the most important product categories the pre-crisis levels have so far not been reached and maybe will not be reached. In certain product categories the growth has been only marginal. It seems that starting localproduction will become increasingly important in the future. This is further encouraged by the fact that Russian consumers favour domestic food products. Russian consumers are very price conscious and demand quality in food products. The perceived price-quality ratio is an important criterion in the purchase decision.The majority of foodstuff retail is still conducted via unorganised forms of trade (e.g. kiosks and marketplaces) but modern retail chains are developing at a fast pace in Russia. They are also expected to dominate the retail trade in foodstuffs over the unorganised forms of trade in the future. This will change the distribution systems as well. The retail chains are trying to shorten the distribution chain, similarly to what has been seen in the Western countries. This together with the strengthening of retail chains is likely to shrink the role of wholesalers, as the chains increasingly want to work directly with the producers. Many large retail chains are acquiring or have already acquired a distribution centre or centres in order to boost efficiency and control the flow of products. The strengthening of the retail chains also gives them power in negotiations, which the producers and distributors have to adjust to. For example store entry fees and retail chains' own private label products pose challenges to the food producers. In the food production sector the competition is fierce, as large Russianand foreign producers want to ensure their piece of the market. The largest producers utilise their size: they invest in big marketing campaigns and are willing to pay high entry fees to retail chains in order to secure a place on the store shelves and to build a strong brand in Russia. This complicates the situation from the viewpoint of small producers. Currently, the most popular type of distribution system among the interviewed Finnish food producers is based on a network of local distributors. There is, however, a strong consensus on the importanceof starting local production in order to be a serious actor in Russia in the future. Factors that hinder the starting of local production include the lack of local infrastructure and qualified staff, and the low risk tolerance of Finnish firms. Major barriers for entry in Russia are the actions of authorities, fierce competition, fragmented market and Finnish producers' heavy production costs. The suggested strategies for increasing the market share include focusing geographically or segment-wise, introducing new products, starting local production, andcooperation between Finnish producers. Smallness was one reason why Finnish producers had to cut down their operations in Russia due to the 1998 crisis. Smaller producers had fewer resources to tolerate losses during the period of crisis. Smallness is reflected also on trade negotiations with retail chains and distributors. It makes it harder to cope with the store entry fees and to differentiatefrom the mass of products propped up by expensive advertising. Finally, it makes it harder for Finnish producers to start or expand local production, as it is more difficult for a small producer to get financing and to tolerate the increased risks. Compensating for the smallness might become the crucial factor determining the future success of Finnish food producers in the Russian market.

A Development and Application of a Three-Dimensional Model for a CFB Gasifier

The developing energy markets and rising energy system costs have sparked the need to find new forms of energy production and increase the self-sufficiency of energy production. One alternative is gasification, whose principles have been known for decades, but it is only recently when the technology has become a true alternative. However, in order to meet the requirements of modern energy production methods, it is necessary to study the phenomenon thoroughly. In order to understand the gasification process better and optimize it from the viewpoint of ecology and energy efficiency, it is necessary to develop effective and reliable modeling tools for gasifiers. The main aims of this work have been to understand gasification as a process and furthermore to develop an existing three-dimensional circulating fluidized bed modeling tool for modeling of gasification. The model is applied to two gasification processes of 12 and 50 MWth. The results of modeling and measurements have been compared and subsequently reviewed. The work was done in co-operation with Lappeenranta University of Technology and Foster Wheeler Energia Oy.

Perspectives for the production and usage of wood chips as a source of energy in the North-West of Russia

The development of bioenergy on the basis of wood fuels has received considerable attention in the last decades. The combination of large forest resources and reliance on fossil fuels makes the issue of wood chips usage in Russia an actual topic for the analysis. The main objective of this study is to disclose the current state and perspectives for the production of wood chips and their usage as a source of energy in the North-West of Russia. The study utilizes an integrated approach to explore the market of wood chips on the basis of comprehensive analysis of documentation and expert opinions. The analysis of wood chips market was performed for eight regions of the North-West district of Russia within two major dimensions: its current state and perspectives in the nearest five years. The results of the study show a comprehensive picture of the wood chips market, including the potential for wood chips production, the specific features of production and consumption and the perspectives for the market development within the regions of the North-West district of Russia. The study demonstrated that the market of wood chips is underdeveloped in the North-West of Russia. The findings of the work may be used by forest companies for the strategic planning.

Corrosion behaviour of boiler tube materials during combustion of fuels containing Zn and Pb

Många förbränningsanläggningar som bränner utmanande bränslen såsom restfraktioner och avfall råkar ut för problem med ökad korrosion på överhettare och/eller vattenväggar pga. komponenter i bränslena som är korrosiva. För att minimera problemen i avfallseldade pannor hålls ångparametrarna på en relativt låg nivå, vilket drastiskt minskar energiproduktionen. Beläggningarna i avfallseldade pannor består till största delen av element som är förknippade med högtemperaturkorrosion: Cl, S, alkalimetaller, främst K och Na, och tungmetaller som Pb och Zn, och det finns också indikationer av Br-förekomst. Det låga ångtrycket i avfallseldade pannor påverkar också stålrörens temperatur i pannväggarna i eldstaden. I dagens läge hålls temperaturen normalt vid 300-400 °C. Alkalikloridorsakad (KCl, NaCl) högtemperaturkorrosion har inte rapporterats vara relevant vid såpass låga temperaturer, men närvaro av Zn- och Pb-komponenter i beläggningarna har påvisats förorsaka ökad korrosion redan vid 300-400 °C. Vid förbränning kan Zn och Pb reagera med S och Cl och bilda klorider och sulfater i rökgaserna. Dessa tungmetallföreningar är speciellt problematiska pga. de bildar lågsmältande saltblandningar. Dessa lågsmältande gasformiga eller fasta föreningar följer rökgasen och kan sedan fastna eller kondensera på kallare ytor på pannväggar eller överhettare för att sedan bilda aggressiva beläggningar. Tungmetallrika (Pb, Zn) klorider och sulfater ökar risken för korrosion, och effekten förstärks ytterligare vid närvaro av smälta. Motivet med den här studien var att få en bättre insikt i högtemperaturkorrosion förorsakad av Zn och Pb, samt att undersöka och prediktera beteendet och motståndskraften hos några stålkvaliteter som används i överhettare och pannväggar i tungmetallrika förhållanden och höga materialtemperaturer. Omfattande laboratorie-, småskale- och fullskaletest utfördes. Resultaten kan direkt utnyttjas i praktiska applikationer, t.ex. vid materialval, eller vid utveckling av korrosionsmotverkande verktyg för att hitta initierande faktorer och förstå deras effekt på högtemperaturkorrosion.

Northern Landscapes : ʻʻImplementation of the European Landscape Convention In the North Calotte Area Municipalitiesʼʼ - Conference in Inari, Finland 7-9.9.2011

The conference promoting the objectives of the international European Landscape Convention (ELC) was held on 7-9 September 2011 in Inari. The primary aim of the conference was to increase awareness of the ELC and the prospects and requirements it brings to practical planning work, especially at the municipal level. The conference speakers included top experts from Sweden, Norway, Finland, France, Holland and Catalonia. This report is a collection of articles written by the experts in the ELC conference. The report is available in five languages: Finnish, Swedish, Norwegian, Northern Sámi and English. The common characteristics of the North Calotte area, such as the magnificent riverside scenery and the beautiful fell landscapes formed by the Sámi culture and reindeer management are broadly reflected in the environment. Alongside the traditional forms of land use, many other livelihoods and forms of land use now need to be accommodated in the area. Tourism, energy production, mining industry and new infrastructure create new and manifold challenges to the authorities in charge of land use in these areas. Municipalities need information and support for versatile planning in the future, so that the unique and valuable characteristics of the North can be preserved. Landscape protection and management in the landscape areas is executed through areal and land use planning, mainly through town planning and the creation of landscape management plans. The municipalities in the North Calotte region have their own partly divergent methods and practices, based on the various land use processes are executed. The municipalities and inhabitants have a great interest in preserving and protecting their living environment and maintaining and increasing the appeal of the area. Landscape is viewed as one of the most significant appealing factors that cannot be lost. The increasing land use in municipalities, for example due to energy production, mining industry and increasing tourism, create a need for more multidimensional planning. The reconciliation of the wishes of different interest groups, and traditional and new livelihoods will not be easy. Conflict is inevitable. This will lead to a greater need to engage local bodies to the planning processes right from the start of the projects. Close cooperation between different administrative branches, operators, local bodies and landscape research promote the objectives of the convention. To ensure that the work continues, a landscape co-operation group is planned to be established in the North Calotte area. It´s main task is to promote and develop landscape policy in the area.

Data management as a part of performance management: Case study about production reporting development project

Because of the increased availability of different kind of business intelligence technologies and tools it can be easy to fall in illusion that new technologies will automatically solve the problems of data management and reporting of the company. The management is not only about management of technology but also the management of processes and people. This thesis is focusing more into traditional data management and performance management of production processes which both can be seen as a requirement for long lasting development. Also some of the operative BI solutions are considered in the ideal state of reporting system. The objectives of this study are to examine what requirements effective performance management of production processes have for data management and reporting of the company and to see how they are effecting on the efficiency of it. The research is executed as a theoretical literary research about the subjects and as a qualitative case study about reporting development project of Finnsugar Ltd. The case study is examined through theoretical frameworks and by the active participant observation. To get a better picture about the ideal state of reporting system simple investment calculations are performed. According to the results of the research, requirements for effective performance management of production processes are automation in the collection of data, integration of operative databases, usage of efficient data management technologies like ETL (Extract, Transform, Load) processes, data warehouse (DW) and Online Analytical Processing (OLAP) and efficient management of processes, data and roles.