The biotechnology of lactic acid bacteria with emphasis on applications in food safety and human health

Selostus: Terveyttä ja ruoan turvallisuutta edistävät maitohappobakteerien biotekniset sovellukset

An Infant with Food Allergy and Eczema in the Family – The Mental and Economic Burden of Caring

Allergic diseases including food allergy and eczema in an infant in combination with the everyday activities of caring for a family will pose challenges to parents. Only fragments of these challenges are revealed to health care professionals. Families have varying mental, social and economic resources to help them care for an allergic infant, and all such resources are important in determining how families succeed in meeting these challenges and the quality of the infant’s care. This study evaluated the whole burden to the family caused by an infant's allergic disease during the first 24 months of life. As the primary caregiver during this period is usually the mother, her perspective was considered important. Ecocultural theory, which considers families as capable of modifying the positive and negative forces facing them, was taken as the frame of reference. Data were collected as part of an ongoing prospective mother-infant study, and the methods included severity scoring of atopic dermatitis, dietary records, health-related quality of life measurements and assessments of the use of health care services and medications for treating the infant’s eczema, food allergy and asthma. Interviews with mothers were analysed by deductive content analysis on the basis of ecocultural theory and the family empowerment model. The theme “Living an ordinary family life” guided the organization of family activities essential for treating the infant's food allergy and eczema. These activities were sources of both strain and support for the mothers, the allergy-related supporting factors being the mother’s own knowledge of the allergy, hopes for an improvement in the infant’s condition, social support and work. An infant’s food allergy at the age of one year caused considerable strain for the mother in cases where the introduction of new foods into the child’s diet was delayed. This delay was still causing the mother additional strain when the child was 24 months of age. The infants waking at night at the ages of 12 and 24 months because of itching related to eczema caused strain for the mothers. The infants’ health-related quality of life was impaired at ages of 6 and 12 months compared with healthy infants. The principal reasons for impairments were itching, scratching and sleep disturbances at 6 and 12 months and treatment difficulties at 6 months. Problems with getting to sleep were reported at all stages irrespective of eczema and were also present in healthy infants. The economic impact of the treatment of allergic diseases on families during the first 24 months was 131 EUR (2006 value) in cases of eczema and 525 EUR in cases of food allergy. From the societal perspective, the costs of food allergy were a median of 3183 EUR (range 628–11 560 EUR) and of eczema a median of 275 EUR (range 94–1306 EUR). These large variations in costs in food allergy and eczema indicate that disease varies greatly . In conclusion, food allergy and eczema cause extra activities and costs to families which arrange these disease-related activities in such a way that they support the leading family theme “Living an ordinary family life”. Health care professionals should consider this thematic character of family life and disease-related activities in order to ensure that new treatments are sustainable, meaningful and tailored to daily activities. In addition, those mothers who are experiencing difficulties with food allergic infants or infants with eczema should be recognized early and provided with individual encouragement and support from health clinics. In the light of the present results, early detection of symptoms and effective parental guidance can contribute to the well-being and health-related quality of life of the child and family.

Accelerating food safety and quality control: The use of antibody engineering techniques in the detec-tion of low-molecular weight food contaminants

The increased awareness and evolved consumer habits have set more demanding standards for the quality and safety control of food products. The production of foodstuffs which fulfill these standards can be hampered by different low-molecular weight contaminants. Such compounds can consist of, for example residues of antibiotics in animal use or mycotoxins. The extremely small size of the compounds has hindered the development of analytical methods suitable for routine use, and the methods currently in use require expensive instrumentation and qualified personnel to operate them. There is a need for new, cost-efficient and simple assay concepts which can be used for field testing and are capable of processing large sample quantities rapidly. Immunoassays have been considered as the golden standard for such rapid on-site screening methods. The introduction of directed antibody engineering and in vitro display technologies has facilitated the development of novel antibody based methods for the detection of low-molecular weight food contaminants. The primary aim of this study was to generate and engineer antibodies against low-molecular weight compounds found in various foodstuffs. The three antigen groups selected as targets of antibody development cause food safety and quality defects in wide range of products: 1) fluoroquinolones: a family of synthetic broad-spectrum antibacterial drugs used to treat wide range of human and animal infections, 2) deoxynivalenol: type B trichothecene mycotoxin, a widely recognized problem for crops and animal feeds globally, and 3) skatole, or 3-methyindole is one of the two compounds responsible for boar taint, found in the meat of monogastric animals. This study describes the generation and engineering of antibodies with versatile binding properties against low-molecular weight food contaminants, and the consecutive development of immunoassays for the detection of the respective compounds.

Astringent Food Compounds and Their Interactions with Taste Properties

Astringency is traditionally thought to be induced by plant tannins in foods. Because of this current research concerning the mechanism of astringency is focused on tannin‐protein interactions and thus on precipitation, which may be perceived by mechanoreceptors. However, astringency is elicited by a wide range of different phenolic compounds, as well as, some non‐phenolic compounds in various foods. Many ellagitannins or smaller compounds that contribute to astringent properties do not interact with salivary proteins and may be directly perceived through some receptors. Generally, the higher degree of polymerization of proanthocyanidins can be associated with more intense astringency. However, the astringent properties of smaller phenolic compounds may not be directly predicted from the structure of a compound, although glycosylation has a significant role. The astringency of organic acids may be directly linked to the perception of sourness, and this increases along with decreasing pH. Astringency can be divided into different sub‐qualities, including even other qualities than traditional mouth‐drying, puckering or roughing sensations. Astringency is often accompanied by bitter or sour or both taste properties. The different sub‐qualities can be influenced by different astringent compounds. In general, the glycolysation of the phenolic compound results in more velvety and smooth mouthdrying astringency. Flavonol glycosides and other flavonoid compounds and ellagitannins contribute to this velvety mouthdrying astringency. Additionally, they often lack the bitter properties. Proanthocyanidins and phenolic acids elicit more puckering and roughing astringency with some additional bitter properties. Quercetin 3‐O‐rutinoside, along with other quercetin glycosides, is among the key astringent compounds in black tea and red currants. In foods, there are always various other additional attributes that are perceived at the same with astringency. Astringent compounds themselves may have other sensory characteristics, such as bitter or sour properties, or they may enhance or suppress other sensory properties. Components contributing to these other properties, such as sugars, may also have similar effects on astringent sensations. Food components eliciting sweetness or fattiness or some polymeric polysaccharides can be used to mask astringent subqualities. Astringency can generally be referred to as a negative contributor to the liking of various foods. On the other hand, perceptions of astringent properties can vary among individuals. Many genetic factors that influence perceptions of taste properties, such as variations in perceiving a bitter taste or variations in saliva, may also effect the perception of astringency. Individuals who are more sensitive to different sensations may notice the differences between astringent properties more clearly. This may not have effects on the overall perception of astringency. However, in many cases, the liking of astringent foods may need to be learned by repetitive exposure. Astringency is often among the key sensory properties forming the unique overall flavour of certain foods, and therefore it also influences whether or not a food is liked. In many cases, astringency may be an important sub‐property suppressed by other more abundant sensory properties, but it may still have a significant contribution to the overall flavour and thus consumer preferences. The results of the practical work of this thesis show that the astringent phenolic compounds are mostly located in the skin fractions of black currants, crowberries and bilberries (publications I–III). The skin fractions themselves are rather tasteless. However, the astringent phenolic compounds can be efficiently removed from these skin fractions by consecutive ethanol extractions. Berries contain a wide range of different flavonol glycosides, hydroxycinnamic acid derivatives and anthocyanins and some of them strongly contribute to the different astringent and bitterness properties. Sweetness and sourness are located in the juice fractions along with the majority of sugars and fruit acids. The sweet and sour properties of the juice may be used to mask the astringent and bitterness properties of the extracts. Enzymatic treatments increase the astringent properties and fermented flavour of the black currant juice and decrease sweetness and freshness due to the effects on chemical compositions (IV). Sourness and sweetness are positive contributors to the liking of crowberry and bilberry fractions, whereas bitterness is more negative (V). Some astringent properties in berries are clearly negative factors, whereas some may be more positive. The liking of berries is strongly influenced by various consumer background factors, such as motives and health concerns. The liking of berries and berry fractions may also be affected by genetic factors, such as variations in the gene hTAS2R38, which codes bitter taste receptors (V).

Role of service and data reuse in enterprises

Digitalization has been predicted to change the future as a growing range of non-routine tasks will be automated, offering new kinds of business models for enterprises. Serviceoriented architecture (SOA) provides a basis for designing and implementing welldefined problems as reusable services, allowing computers to execute them. Serviceoriented design has potential to act as a mediator between IT and human resources, but enterprises struggle with their SOA adoption and lack a linkage between the benefits and costs of services. This thesis studies the phenomenon of service reuse in enterprises, proposing an ontology to link different kinds of services with their role conceptually as a part of the business model. The proposed ontology has been created on the basis of qualitative research conducted in three large enterprises. Service reuse has two roles in enterprises: it enables automated data sharing among human and IT resources, and it may provide cost savings in service development and operations. From a technical viewpoint, the ability to define a business problem as a service is one of the key enablers for achieving service reuse. The research proposes two service identification methods, first to identify prospective services in the existing documentation of the enterprise and secondly to model the services from a functional viewpoint, supporting service identification sessions with business stakeholders.

Catalytic transformations of fatty acid derivatives for food, oleochemicals and fuels over carbon supported platinum group metals

Växtoljor som utgör en förnybar naturresurs används som sådana eller i modifierade former i många industriella processer, som är av stor betydelse för vårt vardagliga liv. Växtoljor används i livsmedel, i kemiska och farmaceutiska produkter, i textilindustrin, för framställning av färgämnen och beläggningsmaterial samt som miljövänliga bränslekomponenter. Fetter och oljor hör till de äldsta kemiska komponenterna som utnyttjas av människan. De består huvudsakligen av glycerolestrar och fettsyror. Fetter och oljor har typiskt en kolkedja med kol-koldubbelbindningar samt karboxyl- och estergrupper, som kan genom hydrering eller dekarboxylering konverteras till nyttiga och miljövänliga produkter med hjälp av ädelmetallkatalysatorer. Aktivt kol (C) används som bärare på katalysatorerna. Väteaddition, d.v.s. hydrering av växtoljor har varit föremål för omfattande forskning i över hundra års tid. Hydreringen är en viktig process, för den tillämpas på produktion av fetter och margarin. Omättade fettsyror hydreras traditionellt på nickelbaserade heterogena katalysatorer. Samtidigt med en partiell hydrering av fettsyrorna och fettsyraestrarna som har två dubbelbindningar pågår också isomeringsreaktioner, vilka ger cis- och transisomerer av reaktantmolekylerna. Den största nackdelen med nickelkatalysatorerna är deras giftighet samt bildning av ohälsosamma transisomerer i reaktionsprodukterna. Dessutom deaktiveras nickelkatalysatorn snabbt p.g.a. att nickeltvålar bildas i reaktionsblandningen. Platinabaserade katalysatorer lider däremot inte av dessa begränsningar. Metaller i platinagruppen i det periodiska systemet studerades i detalj för att avslöja kinetiska effekter i hydreringen av cis-metyloleat. Palladium, rutenium, rhodium, platina och iridium användes som katalytiska metaller. Metallhalten på aktivkolbärare var 1 vikt-%. De olika platinametallerna undersöktes för att kartlägga konkurrerande hydrerings- och isomeringsrutter på metallerna. Det visade sig att metallerna i andra raden av det periodiska systemet (Ru, Rh, Pd) är aktivare i isomeringsprocesserna, medan metallerna i tredje raden (Ir, Pt) har en lägre aktivitet. Pd/C valdes bland platinametallerna, för att den är attraktiv ur ekonomisk synvinkel och den är mycket aktiv och selektiv, speciellt jämfört med nickel. Tyngdpunkten i arbetet var utvecklingen av en alternativ, palladiumbaserad hydreringsteknologi som skulle ersätta den traditionella teknologin som är baserad på användningen av nickelkatalysatorer. Palladiumbaserade katalysatorer kan återcirkuleras, de är aktivare och mera resistenta mot syror och de bildar mindre mängder av skadliga transisomerer. För att denna teknologi skall bli ekonomiskt hållbar och konkurrenskraftig, måste den basera sig på de bästa möjliga katalysatorerna, vilket innebär att en optimal kombination av hög aktivitet och selektivitet samt en lång livstid för katalysatorn krävs. Därför inkluderades teknologiska aspekter kraftigt i forskningen. Mycket arbete satsades på design av palladium på en mesoporös kolbärare och undersökning av korrelationerna mellan katalysatorns egenskaper och dess aktivitet i isomeriseringsreaktionerna och i hydreringen av kol-koldubbelbindningarna i reaktantmolekylen. Katalysatorerna karakteriserades med många fysikaliska och kemiska metoder (transmissionselektronmikroskopi (TEM), röntgendiffraktion (XRD), röntgenfotoelektronspektroskopi (XPS), temperaturprogrammerad reduktion (TPR), temperaturprogrammerad desorption (TPD) av kolmonoxid, kemisorption av kolmonoxid, fysisorption av kväve). Temperaturens, vätetryckets och katalysatorkoncentrationens inverkan på fettsyra- och isomersammansättningen hos de hydrerade oljorna bestämdes under kinetiska betingelser, i frånvaro av massöverföringseffekter. Syreavspjälkning genom fullständig dekarboxylering av karboxylgruppen i fettsyramolekylen är det hittills bästa sättet att framställa miljövänlig dieselolja, eftersom linjära paraffiner fås som reaktionsprodukter och en tillsats av dyr vätgas undviks. Deoxygeneringen undersöktes systematiskt på en Pd/C-katalysator (Sibunit) genom att använda mättade fettsyror C16-C20 och C22 som råvara. Produktmolekylen blev en dieselliknande kolvätemolekyl, med en kolatom färre än i utgångsmolekylen. Lika stora dekarboxyleringshastigheter observerades för rena, mättade fettsyror. En jämförelse av deoxygenereringshastigheterna för stearin-, olein- och linolsyra som råvara vid 300oC i närvaro av 1-volymprocent väte på mesoporös Pd/C (Sibunit) avslöjade att katalysatorns aktivitet och selektivitet ökade med en ökande mättningsgrad av reaktantmolekylen. Då stearinsyra användes som utgångsmolekyl, bestod huvudprodukterna av önskade C17-kolväten, medan mängden av aromatiska C17-komponenter ökade, då olein- och linolsyra användes som utgångsmolekyler. Katalysatordeaktiveringen var relativt påfallande vid deoxygeneringen av linolsyra så att endast 3% av fettsyrorna omsattes till produkter i 330 min. Deaktiveringen orsakades av aromatiska C17-komponenter samt av fettsyradimerer, som bildades via en Diels-Alderreaktion. Hydreringen av omättade fettsyror kan därför rekommenderas som ett primärt kemiskt steg i framställningen av miljövänliga dieselprodukter. Målet var också att öka förståelsen av palladiummetallernas roll i nanoskala, speciellt effekten av metallpartiklarna i katalytisk hydrering och deoxygenering. Pd/C-katalysatorer med lika stora halter av Pd syntetiserades och metallens dispersion på bärarmaterialet varierades systematiskt genom en kontrollerad uppväxt av palladiumnanopartiklar på aktiv kolbärare. Metalldispersionens effekt på hydrerings-hastigheten och cis-transförhållandet undersöktes i detalj. En optimal metalldispersion som gav den högsta dekarboxyleringshastigheten hittades. Massöverföringens inverkan på reaktionens hastighet studerades experimentellt och temperaturprogrammerad desorption av kolmonoxid från katalysatorytan undersöktes ingående. Hydrering av växtoljor genomfördes under satsvisa och kontinuerliga betingelser. Både finfördelat Pd/C och katalysatorgranulat användes i experimenten. Ett av målen med arbetet var uppskalningen av hydreringsprocesserna. Med tanke på stora produktionsvolymer var det logiskt att undersöka kontinuerliga hydrerings- och dekarboxyleringsteknologier. En kontinuerlig packad bäddreaktor studerades i laboratorieskala, vilket gav viktig information om katalysatorns långtidsstabilitet och deaktivering. Effekten av rena fettsyror och triglycerider som råvara samt metallpartikelstorleken och palladiumhalten studerades med hjälp av den kontinuerliga reaktorn. Produktionskapaciteten som erhölls med satsvis och kontinuerlig drift jämfördes. Dekarboxyleringen av stearinsyra undersöktes också i en kontinuerlig packad bädd. Omsättningsgraden blev 15% för en stabil katalysator.

Importance of considering food waste in the development of sustainable food packaging systems

Meeting the needs of both present and future generations forms the foundation of sustainable development. Concern about food demand is increasing alongside the continuously growing population. In the pursuit of food security preventing food waste is one solution avoiding the negative environmental impacts that result from producing food unnecessarily. Packages offer one answer to preventing food waste, as they 1) preserve and protect food, 2) introduce the user to the correct way to handle and use the food and package and 3) allow the user to consume the food in its entirety. This thesis aims to enhance the sustainability of food packages by giving special emphasis to preventing food waste. The focus of this thesis is to assist the packaging designer in being able to take into account the requirements for the sustainability of food packages and to be able to integrate these requirements into the product development process. In addition, life cycle methods that can be used as a tool in the packaging design process or in assessing the sustainability of finished food-packaging combinations are evaluated. The methods of life cycle costing (LCC) and life cycle working environment (LCWE) are briefly discussed. The method of life cycle assessment (LCA) is examined more thoroughly through the lens of the literature review of food-package LCA case studies published in the 21st century in three relevant journals. Based on this review and on experiences learned from conducting LCAs, recommendations are given as to how the LCA practitioner should conduct a food packaging study to make most of the results. Two case studies are presented in this thesis. The first case study relates the results of a life cycle assessment conducted for three food items (cold cut (ham), sliced dark bread (rye) and Soygurt drink) and the alternative packaging options of each. Results of this study show that the packaging constitutes only 1–12 % of the total environmental impacts of the food-packaging combination. The greatest effect is derived from the food itself and the wasted food. Even just a small percentage of wasted food causes more environmental impacts than does the packaging. The second case study presents the results of LCC and LCWE analysis done for fruit and vegetable transport packages. In this thesis, the specific results of the study itself are not the focus, but rather the study methods and scope are analysed based on how these complement the sustainability assessment of food packages. This thesis presents reasons why prevention of food waste should be more thoroughly taken into account in food packaging design. In addition, the task of the packaging designer is facilitated by the requirements of sustainable food packaging, by the methods and step-by-step guidance on how to integrate sustainability issues into the design process, and by the recommendations on how to assess the sustainability of food packages. The intention of this thesis is to express the issues that are important in the field of the food packaging industry. Having recognised and implemented these issues, businesses can better manage the risks that could follow from neglecting these sustainability aspects.

Food webs in the era of molecular revolution – Like resolving the Gordian knot with a tricorder

Living nature consists of countless organisms, which are classified into millions of species. These species interact in many ways; for example predators when foraging on their prey, insect larvae consuming plants, and pathogenic bacteria drifting into humans. In addition, abiotic nature has a great initiative impact on life through many factors (including sunlight, ambient temperature, and water. In my thesis, I have studied interactions among different life forms in multifaceted ways. The webs of these interactions are commonly referred to as food webs, describing feeding relationships between species or energy transfer from one trophic level to another. These ecological interactions – whether they occur between species, between individuals, or between microorganisms within an individual – are among the greatest forces affecting natural communities. Relationships are tightly related to biological diversity, that is, species richness and abundances. A species is called a node in food web vocabulary, and its interactions to other species are called links. Generally, Artic food webs are considered to be loosely linked, simple structures. This conception roots into early modern food webs, where insects and other arthropods, for example, were clumped under one node. However, it has been shown that arthropods form the greatest part of diversity and biomass both in the tropics and in Arctic areas. Earlier challenges of revealing the role of insects and microorganisms in interactions webs have become possible with the help of recent advances in molecular techniques. In the first chapter, I studied the prey diversity of a common bat, Myotis daubentonii, in southwestern Finland. My results proved M. daubentonii being a versatile predator whose diet mainly consists of aquatic insects, such as chironomid midges. In the second chapter, I expanded the view to changes in seasonal and individual-based variation in the diet of M. daubentonii including the relationship between available and observed prey. I found out that chironomids remain the major prey group even though their abundance decreases in proportion to other insect groups. Diet varied a lot between individuals, although the differences were not statistically significant. The third chapter took the study to a large network in Greenland. I showed that Artic food webs are very complex when arthropods are taken into account. In the fourth chapter, I examined the bacterial flora of M. daubentonii and surveyed the zoonotic potential of these bacteria. I found Bartonella bacteria, of which one was described as a new species named after the locality of discovery. I have shown in my thesis that Myotis daubentonii as a predator links many insect species as well as terrestrial and aquatic environments. Moreover, I have exposed that Arctic food webs are complex structures comprising of many densely linked species. Finally, I demonstrated that the bacterial flora of bats includes several previously unknown species, some of which could possibly turn in to zoonosis. To summarize, molecular methods have untied several knots in biological research. I hope that this kind of increasing knowledge of the surrounding nature makes us further value all the life forms on earth.

Online MBPeT dashboard : enabling performance testing as a service in the cloud

In this thesis, tool support is addressed for the combined disciplines of Model-based testing and performance testing. Model-based testing (MBT) utilizes abstract behavioral models to automate test generation, thus decreasing time and cost of test creation. MBT is a functional testing technique, thereby focusing on output, behavior, and functionality. Performance testing, however, is non-functional and is concerned with responsiveness and stability under various load conditions. MBPeT (Model-Based Performance evaluation Tool) is one such tool which utilizes probabilistic models, representing dynamic real-world user behavior patterns, to generate synthetic workload against a System Under Test and in turn carry out performance analysis based on key performance indicators (KPI). Developed at Åbo Akademi University, the MBPeT tool is currently comprised of a downloadable command-line based tool as well as a graphical user interface. The goal of this thesis project is two-fold: 1) to extend the existing MBPeT tool by deploying it as a web-based application, thereby removing the requirement of local installation, and 2) to design a user interface for this web application which will add new user interaction paradigms to the existing feature set of the tool. All phases of the MBPeT process will be realized via this single web deployment location including probabilistic model creation, test configurations, test session execution against a SUT with real-time monitoring of user configurable metric, and final test report generation and display. This web application (MBPeT Dashboard) is implemented with the Java programming language on top of the Vaadin framework for rich internet application development. The Vaadin framework handles the complicated web communications processes and front-end technologies, freeing developers to implement the business logic as well as the user interface in pure Java. A number of experiments are run in a case study environment to validate the functionality of the newly developed Dashboard application as well as the scalability of the solution implemented in handling multiple concurrent users. The results support a successful solution with regards to the functional and performance criteria defined, while improvements and optimizations are suggested to increase both of these factors.

Viestintä ravitsemusosaamisen kehittämisessä Case:Sairaalan ateriaprosessi

Tutkielman tarkoituksena oli tutkia viestinnän merkitystä osaamisen kehittämisessä. Tavoitteena oli tutkia, miten viestintä edistää ravitsemusosaamisen kehittämistä sairaalan ateriaprosessissa. Tutkimuksessa etsittiin vastausta kysymyksiin, mitkä ovat ravitsemusosaamisen kehittämisen ja viestinnän tavoitteet, millä työyhteisöviestinnän foorumeilla uuden ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämiä muutoksia käsitellään ja millaisia työssä oppimisen prosesseja näillä foorumeilla on tunnistettavissa. Empirian näkökulmasta tutkimusta voidaan kuvata tapaustutkimukseksi. Tapauksena on sairaalan ateriaprosessi. Tutkimuksen valmistelevana aineistona käytettiin uutta ravitsemushoitosuositusta (Nuutinen ym. 2010), jota täydennettiin haastatteluaineistolla. Tutkimuksessa ovat edustettuina hoitotyön, ruokapalvelun ja ravitsemushoidon asiantuntemuksen näkökulmat sairaalasta sekä ammatti- ja aikuisopistosta. Tutkimusmenetelmänä käytettiin teemahaastatteluja. Haastattelut nauhoitettiin ja litteroitiin tekstimuotoon. Aineisto analysoitiin teemakortiston ja teemoittelun avulla. Tutkimuksen tulokset osoittavat, että ravitsemusosaamisen kehittämisen tavoitteena on uuden ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämien muutosten toteuttaminen sairaalan ravitsemushoidon prosesseissa ja tuotteissa. Ravitsemusosaamisen kehittämisen tavoitteena on tässä yhteydessä ateriaprosessin ja ruokapalvelun tuotteiden eli ruokavalioiden kehittäminen. Ravitsemushoidon kehittämisen tarkoituksena on asiakkaiden toipumisen, elämänlaadun ja hyvinvoinnin edistäminen sekä terveydenhuollon kustannusten säästäminen. Viestinnällä on tärkeä merkitys ravitsemusosaamisen kehittämisessä. Viestinnän avulla edistetään yksilöllistä ja yhteistä eli tiimioppimista vuorovaikutuksen kautta. Ruokapalvelu- ja hoitohenkilöstön sekä ravitsemushoidon asiantuntijoiden välinen vuoropuhelu nähdään tärkeänä ravitsemusosaamisen kehittämisessä. Vuoropuhelun avulla vahvistetaan ravitsemushoitoon liittyvää tietopohjaa ja yhteistä käsitteistöä. Tavoitteena on yhteisen kielen ja toimintamallin luominen ravitsemushoidon kehittämiseen. Ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämiä muutoksia käsitellään ulkoisissa ja sisäisissä verkostoissa esimerkiksi ravitsemus-yhdyshenkilöverkoston tapaamisissa, moniammatillisissa työryhmissä, henkilöstö- ja oppisopimuskoulutuksissa sekä työfoorumilla eli fyysisessä työtilassa ja hyödyntäen viestintäteknologiaa. Hoitotyön, ruokapalvelun ja ravitsemushoidon asiantuntijoilla/opettajilla on tärkeä rooli ravitsemusosaamisen kehittämiseen liittyvässä työssä oppimisen ohjaamisessa. Ravitsemusosaamisen kehittämisessä on tunnistettavissa sosiaalisia, reflektiivisiä, kognitiivisia ja operationaalisia työssä oppimisen prosesseja. Sosiaalisia prosesseja ovat työkokemusten vaihdanta ja reflektiivisiä niiden arviointi. Kognitiivisten prosessien tarkoitus on tiedonhankinta ja prosessointi, jolloin yhdistetään kokemustietoa sekä uutta ravitsemustieteellistä tietoa. Tavoitteena on yhteisen kielen ja toimintamallin luominen, jota kokeillaan käytännössä. Operationaalisia prosesseja ovat fyysisessä työtilassa tapahtuva kokeilemalla, tekemällä ja soveltamalla oppiminen, jolloin uutta toimintamallia esimerkiksi vajaaravitsemuksen seulontaa, ateriatilausta tai reseptiikkaa kokeillaan käytännössä. Johtopäätöksenä voidaan todeta, että sairaalassa on omaksuttu oppivan organisaation periaatteita ravitsemusosaamisen kehittämisessä. Ravitsemusosaamisen kehittäminen on yhteydessä muutokseen, strategiaan, prosessien ja tuotteiden kehittämiseen. Viestinnän avulla edistetään ravitsemushoitosuosituksen ja ravitsemushoidon strategian edellyttämien muutosten toteuttamista sairaalan ateriaprosessissa ja ruokavalioissa. Hoito- ja ruokapalveluhenkilöstön sekä ravitsemushoidon asiantuntijoiden välisen vuoropuhelun tavoitteena on yhteisen kielen ja toimintamallin luominen ravitsemushoidon kehittämiseen. Tutkimus palvelee ravitsemusosaamisen kehittämistä sairaalan ateriaprosessissa. Tutkimuksen tuloksia on mahdollista käyttää vertailuoppimismateriaalina terveydenhuollon organisaatioissa ja verkostoissa.

In search of good relationships to music : understanding aspiration and challenge in developing music school teacher practices

This study focuses on teacher practices in publicly funded music schools in Finland. As views on the aims of music education change and broaden, music schools across Europe share the challenge of developing their activities in response. In public and scholarly debate, there have been calls for increased diversity of contents and concepts of teaching. In Finland, the official national curriculum for state-funded music schools builds on the ideal that teaching and learning should create conditions which promote ‘a good relationship to music’. The meaning of this concept has been deliberately left open in order to leave room for dialogue, flexibility, and teacher autonomy. Since what is meant by ‘good’ is not defined in advance, the notion of ‘improving’ practices is also open to discussion. The purpose of the study is to examine these issues from teachers’ point of view by asking what music school teachers aim to accomplish as they develop their practices. Methodologically, the study introduces a suggestion for building empirical research on Alperson’s ‘robust’ praxial approach to music education, a philosophical theory which is strongly committed to practitioner perspectives and musical diversity. A systematic method for analysing music education practices, interpretive practice analysis, is elaborated with support from interpretive research methods originally used in policy analysis. In addition, the research design shows how reflecting conversations (a collaborative approach well-known in Nordic social work) can be fruitfully applied in interpretive research and combined with teacher inquiry. Data have been generated in a collaborative project involving five experienced music school teachers and the researcher. The empirical material includes transcripts from group conversations, data from teacher inquiry conducted within the project, and transcripts from follow-up interviews. The teachers’ aspirations can be understood as strivings to reinforce the connection between musical practices and various forms of human flourishing such that music and flourishing can sustain each other. Examples from their practices show how the word ‘good’ receives its meaning in context. Central among the teachers’ concerns is their hope that students develop a free and sustainable interest in music, often described as inspiration. I propose that ‘good relationships to music’ and ‘inspiration’ can be understood as philosophical mediators which support the transition from an indeterminate ‘interest in music’ towards specific ways in which music can become a (co-)constitutive part of living well in each person’s particular circumstances. Different musical practices emphasise different aspects of what is considered important in music and in human life. Music school teachers consciously balance between a variety of such values. They also make efforts to resist pressure which might threaten the goods they think are most important. Such goods include joy, participation, perseverance, solid musical skills related to specific practices, and a strong sense of vitality. The insights from this study suggest that when teachers are able to create inspiration, they seem to do so by performing complex work which combines musical and educational aims and makes general positive contributions to their students’ lives. Ensuring that teaching and learning in music schools remain as constructive and meaningful as possible for both students and teachers is a demanding task. The study indicates that collaborative, reflective and interdisciplinary work may be helpful as support for development processes on both individual and collective levels of music school teacher practices.