Identification and application of bile metabolites to assess the exposure of fish to pharmaceuticals in the environment

Thousands of tons of pharmaceuticals are consumed yearly worldwide. Due to the continuous and increasing consumption and their incomplete elimination in wastewater treatment plants (WWTP), pharmaceuticals and their metabolites can be detected in receiving waters, although at low concentrations (ng to low μg/L). As bioactive molecules the presence of pharmaceuticals in the aquatic environment must be considered potentially hazardous for the aquatic organisms. In this thesis, the biotransformation and excretion of pharmaceuticals in fish was studied. The main biotransformation pathways of three anti‐inflammatory drugs, diclofenac, naproxen and ibuprofen, in rainbow trout were glucuronidation and taurine conjugation of the parent compounds and their phase I metabolites. The same metabolites were present in fish bile in aquatic exposures as in fish dosed with intraperitoneal injection. Higher bioconcentration factor in bile (BCFbile) was found for ibuprofen when compared to diclofenac and naproxen. Laboratory exposure studies were followed by a study of uptake of pharmaceuticals in a wild fish population living in lake contaminated with WWTP effluents. Of the analyzed 17 pharmaceuticals and six phase I metabolites, only diclofenac, naproxen and ibuprofen was present in bream and roach bile. It was shown, that diclofenac, naproxen and ibuprofen excreted by the liver can be found in rainbow trout and in two native fish species living in the receiving waters. In the bream and roach bile, the concentrations of diclofenac, naproxen and ibuprofen were roughly 1000 times higher than those found in the lake water, while in the laboratory exposures, the bioconcentration of the compounds and their metabolites in rainbow trout bile were at the same level as in wild fish or an order of magnitude higher. Thus, the parent compounds and their metabolites in fish bile can be used as a reliable biomarker to monitor the exposure of fish to environmental pharmaceuticals present in water receiving discharges from WWTPs.

Persistent organic pollutants in sediments and fish from Lake Victoria, Uganda

This thesis describes the occurrence and sources of selected persistent organic pollutants (POPs) such as polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and hexachlorocyclohexanes (HCHs) in the northern watershed of Lake Victoria. Sediments and fish were collected from three highly polluted embayments (i.e. Murchison Bay, Napoleon Gulf and Thurston Bay) of the lake. The analysis for PCDD/Fs, PCBs and PBDEs was done using a high resolution mass spectrometer coupled to a gas chromatograph (GC), and a GC equipped with an electron capture detector was used for HCHs. Total (Σ) PCDD/Fs, PCBs and PBDEs in sediments ranged from 3.19 to 478, 313 to 4325 and 60.8 to 179 pg g-1 dry weight (dw), respectively. The highest concentrations of pollutants were found at sites close to industrial areas and wastewater discharge points. The maximum concentrations of PCDD/Fs, PCBs, PBDEs and HCHs in fish muscle homogenates were 49, 779, 495 and 45,900 pg g-1 wet weight (ww), respectively. The concentrations of the pollutants in Nile perch (Lates niloticus) were significantly greater than those in Nile tilapia (Oreochromis niloticus), possibly due to differences in trophic level and dietary feeding habits among fish species. World Health Organization-toxic equivalency quotient (WHO2005-TEQ) values in the sediments were up to 4.24 pg g-1 dw for PCDD/Fs and 0.55 pg TEQ g-1 dw for the 12 dioxin-like PCBs (dl-PCBs). 23.1% of the samples from the Napoleon Gulf were above the interim sediment quality guideline value of 0.85 pg WHO-TEQ g-1 dw set by the Canadian Council for Ministers of the Environment. The WHO2005-TEQs in fish were 0.001-0.16 pg g-1 for PCDD/Fs and 0.001-0.31 pg g-1 ww for dl- PCBs. The TEQ values were within a permissible level of 3.5 pg g−1 ww recommended by the European Commission. Based on the Commission set TEQs and minimum risk level criteria formulated by the Agency for Toxic Substances and Disease Registry, the consumption of fish from Lake Victoria gives no indication of health risks associated to PCDD/Fs and PCBs. Principal component analysis (PCA) indicated that anthropogenic activities such as agricultural straw open burning, medical waste incinerators and municipal solid waste combustors were the major sources of PCDD/Fs in the watershed of Lake Victoria. The ratios of α-/γ-HCH varied from 0.89 to 1.68 suggesting that the highest HCH residues mainly came from earlier usage and fresh γ-HCH (lindane). In the present study, the concentration of POPs in fish were not significantly related to those in sediments, and the biota sediment accumulation factor (BSAF) concept was found to be a poor predictor of the bioavailability and bioaccumulation of environmental pollutants.

Streptococcus agalactiae (GBS) PNA FISH -tekniikan soveltuminen B-ryhmän streptokokin tunnistukseen

B-ryhmän beetahemolyyttinen streptokokki (GBS = Group B Streptococcus, Streptococcus agalactiae)aiheuttaa vakavia infektioita yleensä astasyntyneillä. Tartunta saadaan yleensä synnytyskanavasta ja riskitekijöinä ovat muun muassa keskosuus, ennenaikainen lapsivedenmeno ja äidin runsas Bstreptokokkikolonisaatio emättimessä. Bakteerin tunnistukseen käytetään tällä hetkellä viljelytekniikkaa, jonka tulos saadaan vasta 24-48 tunnin kuluttua. Opinnäytetyöni tarkoituksena on tutkia uutta ja nopeampaa tunnistusmenetelmää: GBS PNA FISH - tekniikkaa (Peptide Nucleic Acid Fluorescence in Situ Hybridization). Tarkoituksena on tutkia tekniikan spesifiteettiä ja sensitiviteettiä. Tekniikan spesifiteettiä tutkitaan B-ryhmän beetahemolyyttisellä streptokokilla sekä kuudella muulla emättimen normaaliflooraan kuuluvalla bakteerilajilla. Yhteensä bakteerikantoja on tutkimuksessa mukana 48 kappaletta. Tämän lisäksi tutkitaan myös tekniikan sensitiviteettiä, jota tutkitaan bakteereista tehdyn laimennossarjan avulla. Sensitiviteetti tutkitaan bakteeriseoksesta, jonne on B-ryhmän beetahemolyyttisen streptokokin lisäksi lisätty muita emättimen normaaliflooran bakteereita. Lisäksi sensitiviteetti tutkitaan pelkällä B-ryhmän beetahemolyyttisellä streptokokilla käyttäen sekä normaalia että bakteerin rikastusmenetelmää. Testeistä saadut tulokset tulkitaan fluoresenssimikroskoopin avulla. GBS PNA FISH -tekniikan spesifiteetti todettiin erittäin hyväksi. Tekniikka tunnisti kaikki B-ryhmän beetahemolyyttiset streptokokit positiivisiksi ja kaikki muut lajit antoivat negatiivisen tuloksen. B-streptokokin positiivisuus oli erotettavissa mikroskopoitaessa vahvana fluoresointina, kun taas muut lajit eivät fluoresoineet lainkaan. GBS PNA FISH -tekniikan sensitiivisyyden tulokset eivät kuitenkaan täyttäneet odotuksia. Ainoastaan bakteerin rikastusmenetelmällä saadut tulokset olivat loistavia, mutta bakteeriseoksella ja pelkällä B-ryhmän beetahemolyyttisellä streptokokilla saadut tulokset olivat lähes olemattomia. Rikastusmenetelmän kaikki laimennokset fluoresoivat positiivisina, kun taas muissa tapauksissa vain vahvin liuos antoi jonkinlaista positiivista fluoresointia. GBS PNA FISH -tekniikan spesifiteetti todettiin hyväksi. Tekniikan sensitiviteetti ei kuitenkaan vastaa käyttötarkoitusta ja todellisessa tilanteessa tekniikka ei pystyisi tunnistamaan sille spesifistä bakteeria muiden bakteerien joukosta.

Time consumption and damage to the remaining stock in mechanised and motor manual pre-commercial thinning

Abstract

Time consumption analysis of the mechanized cut-to-length harvesting system

[Abstract]

Information and Communication Society's Impact on Global Paper Consumption

Tämän tutkielman tavoitteena on selvittää informaatio- ja kommunikaatioyhteiskunnan vaikutusta paperin kulutukseen maailmanlaajuisesti. Tarkoituksena on löytää informaatio- ja kommunikaatioyhteiskuntaa kuvaavia mittareita, joiden avulla voidaan vertailla kehittyneitä ja kehittyviä markkina-alueita keskenään. Tutkimusongelmaan haetaan ratkaisua tutkimalla sekä kirjallisuutta että tilastoja, ja vertaamalla niitä esitettyihin teorioihin informaatio- ja kommunikaatioyhteiskunnan kehityksestä. Tutkielman avulla pyritään arvioimaan ja kuvaamaantoimintaympäristön muutoksia paperin kulutuksen suhteen pitkällä aikavälillä informaatio- ja kommunikaatioyhteiskunnan näkökulmasta.

Optimization of energy consumption in wastewater pumping

Pumppauksessa arvioidaan olevan niin teknisesti kuin taloudellisestikin huomattavia mahdollisuuksia säästää energiaa. Maailmanlaajuisesti pumppaus kuluttaa lähes 22 % sähkö-moottorien energiantarpeesta. Tietyillä teollisuudenaloilla jopa yli 50 % moottorien käyttämästä sähköenergiasta voi kulua pumppaukseen. Jäteveden pumppauksessa pumppujen toiminta perustuu tyypillisesti on-off käyntiin, jolloin pumpun ollessa päällä se käy täydellä teholla. Monissa tapauksissa pumput ovat myös ylimitoitettuja. Yhdessä nämä seikat johtavat kasvaneeseen energian kulutukseen. Työn teoriaosassa esitellään perusteet jätevesihuollosta ja jäteveden käsittelystä sekä pumppaussysteemin pääkomponentit: pumppu, putkisto, moottori ja taajuusmuuttaja. Työn empiirisessä osassa esitellään työn aikana kehitetty laskuri, jonka avulla voidaan arvioida energiansäästöpotentiaalia jäteveden pumppaussysteemeissä. Laskurilla on mandollista laskea energiansäästöpotentiaali käytettäessä pumpun tuoton ohjaustapana pyörimisnopeuden säätöä taajuusmuuttajalla on-off säädön sijasta. Laskuri ilmoittaa optimaalisimmanpumpun pyörimisnopeuden sekä ominaisenergiankulutuksen. Perustuen laskuriin, kolme kunnallista jätevedenpumppaamoa tutkittiin. Myös laboratorio-testitsuoritettiin laskurin simuloimiseksi sekä energiansäästöpotentiaalin arvioimiseksi. Tutkimukset osoittavat, että jätevedenpumppauksessa on huomattavia mandollisuuksia säästää energiaa pumpun pyörimisnopeutta pienentämällä. Geodeettisen nostokorkeuden ollessa pieni, voidaan energiaa säästää jopa 50 % ja pitkällä aikavälillä säästö voi olla merkittävä. Tulokset vahvistavat myös tarpeen jätevedenpumppaussysteemien toiminnan optimoimiseksi.

The effect of information and communication technology on global paper consumption

The objective of this thesis is to find out how information and communication technology affects the global consumption of printing and writing papers. Another objective is to find out, whether there are differences between paper grades in these effects. The empirical analysis is conducted by linear regression analysis using three sets of country-level panel data from 1990-2006. Data set of newsprint contains 95 countries, data set of uncoated woodfree paper 61 countries and data set of coated mechanical paper 42 countries. The material is based on paper consumption data of RISI’s Industry Statistics Database and on the information and communication technology data of GMID-database. Results indicate that number of Internet users has statistically significant negative effect on the consumption of newsprint and on the consumption of coated mechanical paper and number of mobile telephone users has positive effect on the consumptions of these papers. Results also indicate that information and communication technologies have only small effect on consumption of uncoated woodfree paper or no significant effect at all, but these results are more uncertain to some extent.

Consumption of Fashion Luxury Brands

The main objective of this study is to find out why people buy luxury brands and which factors influence their decisions. The elements of luxury brands as well as motivation, culture and self-concept is researched as being the main factors behind luxury consumption. It was important to conduct this study because the luxury market is growing with a fast pace and it has hardly been research before. This study was conducted as a qualitative research. Theoretical part is based on the literature and on researches conducted before about the matter. Purposeful sampling method was used in empirical part by interviewing designers Jukka Rintala and Hanna Sarén as well as consumers of luxury brands, who work in the fashion industry. Two different viewpoints were chosen in order to research if designers’ and consumers’ thoughts differed. This study shows that the elements of luxury brands are deemed pretty much the same all around the world and also between the designers and consumers interviewed. Exclusivity referring to unique design and “hard to get” as well as good quality meaning superior materials, were mentioned as the most important elements of luxury brands. According to this study motivation behind luxury consumption is to a great extent dependent on the culture where the luxuries are consumed. However, self-concept has the biggest effect on luxury consumption. This study shows that people in individualistic cultures buy luxuries because they want to. People tend to spoil themselves and show off, thus making them feel good when buying luxuries. However, uniqueness is appreciated. On contrast, in collectivistic cultures people buy luxuries because they have to. Social pressure is much greater in Eastern than in Western culture that being the reason wealth is expected show. This study shows that in some cases designers' and consumers' thoughts about luxury consumption differ. Especially, a big gap was found when talking about materialism behind luxury consumption. The designers did not believe it to be the reason behind luxury consumption where consumers strongly did.

Power Consumption in Carbon Capture and Storage Systems (CCS) and Possibilities to Reduce Power Consumption with Variable Speed Drives

The aim of this master´s thesis is to study which processes increase the auxiliary power consumption in carbon capture and storage processes and if it is possible to reduce the auxiliary power consumption with variable speed drives. Also the cost of carbon capture and storage is studied. Data about auxiliary power consumption in carbon capture is gathered from various studies and estimates made by various research centres. Based on these studies a view is presented how the power auxiliary power consumption is divided between different processes in carbon capture processes. In a literary study, the operation of three basic carbon capture systems is described. Also different methods to transport carbon dioxide and carbon dioxide storage options are described in this section. At the end of the thesis processes that consume most of the auxiliary power are defined and possibilities to reduce the auxiliary power consumption are evaluated. Cost of carbon capture, transport and storage are also evaluated at this point and in the case that the carbon capture and storage systems are fully deployed. According to the results, it can be estimated what are the processes are where variable speed drives can be used and what kind of cost and power consumption reduction could be achieved. Results also show how large a project carbon capture and storage is if it is fully deployed.