Models for vertical wood density of Scots pine, Norway spruce and birch stems, and their application to determine average wood density

Abstract

A support system for evaluating a suitable joining method in the production of sheet metal goods

This report illustrates a comparative study of various joining methods involved in sheet metal production. In this report it shows the selection of joining methods, which includes comparing the advantages and disadvantages of a method over the other ones and choosing the best method for joining. On the basis of various joining process from references, a table is generated containing set of criterion that helps in evaluation of various sheet metal joining processes and in selecting the most suitable process for a particular product. Three products are selected and a comprehensive study of the joining methods is analyzed with the help of various parameters. The table thus is the main part of the analysis process of this study and can be advanced with the beneficial results. It helps in a better and easy understanding and comparing the various methods, which provides the foundation of this study and analysis. The suitability of the joining method for various types of cases of different sheet metal products can be tested with the help of this table. The sections of the created table display the requirements of manufacturing. The important factor has been considered and given focus in the table, as how the usage of these parameters is important in percentages according to particular or individual case. The analysis of the methods can be extended or altered by changing the parameters according to the constraint. The use of this table is demonstrated by pertaining the cases from sheet metal production.

Mekaanisen puunjalostuksen markkinakartoitus: Koivusahatavaran ja -puolijalosteiden markkinat Euroopassa

Tutkimuksen tavoitteena oli kartoittaa koivusahatavaran ja -puolijalosteiden potentiaalisia vientikohdemaita EU-maissa ja Norjassa. Tarkastelun kohteena olivat koivutuotteiden markkinapotentiaali ja kysyntä sekä puutuotteiden markkinointikanavavaihtoehdot Euroopan puutuotemarkkinoilla. Tutkimuksen teoreettisena lähtökohtana oli tarkastella, kuinka markkinointitutkimuksen avulla kartoitetaan tuotantohyödykemarkkinoita, miten määritetään tuotantohyödykkeen markkinapotentiaali ja kysyntä sekä mitä markkinointikanavavaihtoehtoja puutuotteita valmistavalla yrityksellä on vientimarkkinoille lähdettäessä. Empiirisessä osassa selvitettiin sekä kvantitatiivista että kvalitatiivista tietoa Euroopan puutuotemarkkinoista. Lehtipuu- ja koivusahatavaran vienti-, tuonti- ja tuotantotilastojen pohjalta tarkasteltiin koivun suurimpia vientikohdemaita ja arvioitiin kysyntää tulevaisuudessa. Tämän lisäksi puutuotteiden toimialaorganisaatioiden, asiantuntijoiden, puutuotteita valmistavien yritysten ja maahantuojien haastattelujen avulla muodostettiin kokonaiskuva koivusahatavaran ja -puolijalosteiden markkinapotentiaalista ja koivutuotteiden asemasta Euroopan puutuotemarkkinoilla. Koivu koettiin Euroopan puutuotemarkkinoilla kiinnostavana puulajina ja koivutuotteiden kysyntä onkin ollut viime vuosien aikana nousujohteista. Tämä johtuu suurimmaksi osaksi tällä hetkellä vallitsevasta vaaleiden puulajien trendistä. Markkinoilla menestyminen riippuu kuitenkin siitä, kuinka hyvin koivun tarjoaja pystyy vastaamaan asiakkaiden tuotteelle asettamiin vaatimuksiin.

Drivers and Barriers of Collaboration in the Value Chain of Paperboard-Packed Consumer Goods

Value chain collaboration has been a prevailing topic for research, and there is a constantly growing interest in developing collaborative models for improved efficiency in logistics. One area of collaboration is demand information management, which enables improved visibility and decrease of inventories in the value chain. Outsourcing of non-core competencies has changed the nature of collaboration from intra-enterprise to cross-enterprise activity, and this together with increasing competition in the globalizing markets have created a need for methods and tools for collaborative work. The retailer part in the value chain of consumer packaged goods (CPG) has been studied relatively widely, proven models have been defined, and there exist several best practice collaboration cases. The information and communications technology has developed rapidly, offering efficient solutions and applications to exchange information between value chain partners. However, the majority of CPG industry still works with traditional business models and practices. This concerns especially companies operating in the upstream of the CPG value chain. Demand information for consumer packaged goods originates at retailers' counters, based on consumers' buying decisions. As this information does not get transferred along the value chain towards the upstream parties, each player needs to optimize their part, causing safety margins for inventories and speculation in purchasing decisions. The safety margins increase with each player, resulting in a phenomenon known as the bullwhip effect. The further the company is from the original demand information source, the more distorted the information is. This thesis concentrates on the upstream parts of the value chain of consumer packaged goods, and more precisely the packaging value chain. Packaging is becoming a part of the product with informative and interactive features, and therefore is not just a cost item needed to protect the product. The upstream part of the CPG value chain is distinctive, as the product changes after each involved party, and therefore the original demand information from the retailers cannot be utilized as such – even if it were transferred seamlessly. The objective of this thesis is to examine the main drivers for collaboration, and barriers causing the moderate adaptation level of collaborative models. Another objective is to define a collaborative demand information management model and test it in a pilot business situation in order to see if the barriers can be eliminated. The empirical part of this thesis contains three parts, all related to the research objective, but involving different target groups, viewpoints and research approaches. The study shows evidence that the main barriers for collaboration are very similar to the barriers in the lower part of the same value chain; lack of trust, lack of business case and lack of senior management commitment. Eliminating one of them – the lack of business case – is not enough to eliminate the two other barriers, as the operational model in this thesis shows. The uncertainty of the future, fear of losing an independent position in purchasing decision making and lack of commitment remain strong enough barriers to prevent the implementation of the proposed collaborative business model. The study proposes a new way of defining the value chain processes: it divides the contracting and planning process into two processes, one managing the commercial parts and the other managing the quantity and specification related issues. This model can reduce the resistance to collaboration, as the commercial part of the contracting process would remain the same as in the traditional model. The quantity/specification-related issues would be managed by the parties with the best capabilities and resources, as well as access to the original demand information. The parties in between would be involved in the planning process as well, as their impact for the next party upstream is significant. The study also highlights the future challenges for companies operating in the CPG value chain. The markets are becoming global, with toughening competition. Also, the technology development will most likely continue with a speed exceeding the adaptation capabilities of the industry. Value chains are also becoming increasingly dynamic, which means shorter and more agile business relationships, and at the same time the predictability of consumer demand is getting more difficult due to shorter product life cycles and trends. These changes will certainly have an effect on companies' operational models, but it is very difficult to estimate when and how the proven methods will gain wide enough adaptation to become standards.

Modelling of the PWR PACTEL vertical steam generator with the TRACE code

The behavior of the nuclear power plants must be known in all operational situations. Thermal hydraulics computer applications are used to simulate the behavior of the plants. The computer applications must be validated before they can be used reliably. The simulation results are compared against the experimental results. In this thesis a model of the PWR PACTEL steam generator was prepared with the TRAC/RELAP Advanced Computational Engine computer application. The simulation results can be compared against the results of the Advanced Process Simulator analysis software in future. Development of the model of the PWR PACTEL vertical steam generator is introduced in this thesis. Loss of feedwater transient simulation examples were carried out with the model.

Brand positioning for sport goods

The objective of this study was to find out how Exel position itself against its most important competitors, and how it could strengthen its own position in the future. Both end and intermediate customers was researched about their preferences and how the decision process could be influenced. The research was done by telephone interviews and the data was analyzed by statistical methods. The results showed that the decision making when buying floorball sticks is mainly influenced by the image of the brand and the popularity of the brand, rather than the actual technical abilities of the stick.

Designing a Demand Forecasting Process in the Fast Moving Consumer Goods Context

The purpose of this thesis was to study the design of demand forecasting processes. A literature review in the field of forecasting was conducted, including general forecasting process design, forecasting methods and techniques, the role of human judgment in forecasting and forecasting performance measurement. The purpose of the literature review was to identify the important design choices that an organization aiming to design or re-design their demand forecasting process would have to make. In the empirical part of the study, these choices and the existing knowledge behind them was assessed in a case study where a demand forecasting process was re-designed for a company in the fast moving consumer goods business. The new target process is described, as well as the reasoning behind the design choices made during the re-design process. As a result, the most important design choices are highlighted, as well as their immediate effect on other processes directly tied to the demand forecasting process. Additionally, some new insights on the organizational aspects of demand forecasting processes are explored. The preliminary results indicate that in this case the new process did improve forecasting accuracy, although organizational issues related to the process proved to be more challenging than anticipated.

USING ATHLETE ENDORSEMENT IN BRAND POSITIONING – An insight from multinational sports goods companies

It has become a popular method in marketing campaigns to use well-known and admired personalities to promote products. A famous person can draw attention to the brand and change consumers’ perceptions of the brand. The research problem of this study was to offer guidelines on how to use athlete endorsement effectively in brand positioning. This research tried to illustrate how athlete endorsement is a vital brand building factor. Athletes have been found to have special credibility, so this research concentrated on the sports goods industry. Furthermore, athlete endorsement has become a natural part of communicating a sports brand. Athletes highlight the performance of the brand to the consumers. The study was conducted as a qualitative research applying case study method. The two case companies selected for this study were Adidas and Puma. The main findings of the empirical research corresponded to the theoretical framework of the study. Brand positioning strategies in the sports goods industry often include athlete endorsement to some extent. Large multinational companies try to attract the best athletes to promote their brand. The key to successful brand positioning is to have a good product with the right personalities to promote it. However, large multinational companies may face difficulties in localizing their marketing efforts. As a result, global campaigns may not be lucrative everywhere. The role of an expert in an athlete’s sport has resulted in increasing credibility in promoting brands. Creating a superior product in consumers’ minds creates competitive advantage. A top athlete may be linked with superior equipment. After considering the goals of the positioning strategy, companies need to plan their brand awareness process, brand image and brand values. Then, athletes need to be selected based on their characteristics to meet the criteria. Sport sponsorship is a way to support the message delivered through athlete endorsement. Athlete endorsement and sport sponsorship complement the marketing communications mix of a brand. Additionally, companies raise brand awareness and communicate brand image through the athlete. Thus, athletes may earn more money through the sponsorship deals and even feature the advertisements after their professional career. Key words

The analysis of knowledge retention mechanisms for leaving experts

The goal of this thesis is studying knowledge retention mechanisms used in cases of single experts’ leaving in the case company, analyzing the reason for the mechanisms choice and successfulness of knowledge retention process depending of that choice. The theoretical part discusses the origins of knowledge retention processes in the theoretical studies, the existing knowledge retention mechanisms and practical issues of their implementation. The empirical part of the study is designed as employees’ interview with later discussion of the findings. The empirical findings indicate the following reasons for knowledge retention mechanisms choice: type of knowledge retained, specialty of leaving experts and time and distance issues of a particular case. The following factors influenced the success of a retention process: choice of knowledge retention mechanisms, usage of combination of mechanisms and creation of knowledge retention plans. The results might be useful for those interested in factors influencing knowledge retention processes in cases of experts’ departure.