Development of advanced silicon radiation detectors for harsh radiation environment

This thesis describes the development of advanced silicon radiation detectors and their characterization by simulations, used in the work for searching elementary particles in the European Organization for Nuclear Research, CERN. Silicon particle detectors will face extremely harsh radiation in the proposed upgrade of the Large Hadron Collider, the future high-energy physics experiment Super-LHC. The increase in the maximal fluence and the beam luminosity up to 1016 neq / cm2 and 1035 cm-2s-1 will require detectors with a dramatic improvement in radiation hardness, when such a fluence will be far beyond the operational limits of the present silicon detectors. The main goals of detector development concentrate on minimizing the radiation degradation. This study contributes mainly to the device engineering technology for developing more radiation hard particle detectors with better characteristics. Also the defect engineering technology is discussed. In the nearest region of the beam in Super-LHC, the only detector choice is 3D detectors, or alternatively replacing other types of detectors every two years. The interest in the 3D silicon detectors is continuously growing because of their many advantages as compared to conventional planar detectors: the devices can be fully depleted at low bias voltages, the speed of the charge collection is high, and the collection distances are about one order of magnitude less than those of planar technology strip and pixel detectors with electrodes limited to the detector surface. Also the 3D detectors exhibit high radiation tolerance, and thus the ability of the silicon detectors to operate after irradiation is increased. Two parameters, full depletion voltage and electric field distribution, is discussed in more detail in this study. The full depletion of the detector is important because the only depleted area in the detector is active for the particle tracking. Similarly, the high electric field in the detector makes the detector volume sensitive, while low-field areas are non-sensitive to particles. This study shows the simulation results of full depletion voltage and the electric field distribution for the various types of 3D detectors. First, the 3D detector with the n-type substrate and partial-penetrating p-type electrodes are researched. A detector of this type has a low electric field on the pixel side and it suffers from type inversion. Next, the substrate is changed to p-type and the detectors having electrodes with one doping type and the dual doping type are examined. The electric field profile in a dual-column 3D Si detector is more uniform than that in the single-type column 3D detector. The dual-column detectors are the best in radiation hardness because of their low depletion voltages and short drift distances.

The evaluation of hazardous gas components caused by the thermal degradation of plant oils and animal fats

Neste Oil has introduced plant oils and animal fats for the production of NExBTL renewable diesel, and these raw materials differ from the conventional mineral based oils. One subject of new raw materials study is thermal degradation, or in another name pyrolysis, of these organic oils and fats. The aim of this master’s thesis is to increase knowledge on thermal degradation of these new raw materials, and to identify possible gaseous harmful thermal degradation compounds. Another aim is to de-termine the health and environmental hazards of identified compounds. One objective is also to examine the formation possibilities of hazardous compounds in the produc-tion of NExBTL-diesel. Plant oils and animal fats consist mostly of triglycerides. Pyrolysis of triglycerides is a complex phenomenon, and many degradation products can be formed. Based on the literature studies, 13 hazardous degradation products were identified, one of which was acrolein. This compound is very toxic and dangerous to the environment. Own pyrolysis experiments were carried out with rapeseed and palm oils, and with a mix-ture of palm oil and animal fat. At least 12 hazardous compounds, including acrolein, were analysed from the gas phase. According to the experiments, the factors which influence on acrolein formation are the time of the experiment, the sphere (air/hydrogen) in which the experiment is carried out, and the characteristics of the used oil. The production of NExBTL-diesel is not based on pyrolysis. This is why thermal degradation is possible only when abnormal process conditions prevail.

Clinical Learning Environment and Supervision. Development and Validation of the CLES Evaluation Scale

The purpose of the study is: (1) to describe how nursing students' experienced their clinical learning environment and the supervision given by staff nurses working in hospital settings; and (2) to develop and test an evaluation scale of Clinical Learning Environment and Supervision (CLES). The study has been carried out in different phases. The pilot study (n=163) explored the association between the characteristics of a ward and its evaluation as a learning environment by students. The second version of research instrument (which was developed by the results of this pilot study) were tested by an expert panel (n=9 nurse teachers) and test-retest group formed by student nurses (n=38). After this evaluative phase, the CLES was formed as the basic research instrument for this study and it was tested with the Finnish main sample (n=416). In this phase, a concurrent validity instrument (Dunn & Burnett 1995) was used to confirm the validation process of CLES. The international comparative study was made by comparing the Finnish main sample with a British sample (n=142). The international comparative study was necessary for two reasons. In the instrument developing process, there is a need to test the new instrument in some other nursing culture. Other reason for comparative international study is the reflecting the impact of open employment markets in the European Union (EU) on the need to evaluate and to integrate EU health care educational systems. The results showed that the individualised supervision system is the most used supervision model and the supervisory relationship with personal mentor is the most meaningful single element of supervision evaluated by nursing students. The ward atmosphere and the management style of ward manager are the most important environmental factors of the clinical ward. The study integrates two theoretical elements - learning environment and supervision - in developing a preliminary theoretical model. The comparative international study showed that, Finnish students were more satisfied and evaluated their clinical placements and supervision with higher scores than students in the United Kingdom (UK). The difference between groups was statistical highly significant (p= 0.000). In the UK, clinical placements were longer but students met their nurse teachers less frequently than students in Finland. Arrangements for supervision were similar. This research process has produced the evaluation scale (CLES), which can be used in research and quality assessments of clinical learning environment and supervision in Finland and in the UK. CLES consists of 27 items and it is sub-divided into five sub-dimensions. Cronbach's alpha coefficient varied from high 0.94 to marginal 0.73. CLES is a compact evaluation scale and user-friendliness makes it suitable for continuing evaluation.

Effect of the environment inside and outside the cage on the activity and behaviour test performance of silver foxes

Selostus: Kasvatushäkin ympäristön vaikutus hopeakettujen käyttäytymiseen

Geometrically accurate time series of archived aerial images and airborne lidar data in a forest environment

Abstract

Emotions in a Web-based Learning Environment

The aim of this thesis was to examine emotions in a web-based learning environment (WBLE). Theoretically, the thesis was grounded on the dimensional model of emotions. Four empirical studies were conducted. Study I focused on students’ anxiety and their self-efficacy in computer-using situations. Studies II and III examined the influence of experienced emotions on students’ collaborative visible and non-collaborative invisible activities and lurking in a WBLE. Study II also focused on the antecedents of the emotions students experience in a web-based learning environment. Study IV concentrated on clarifying the differences between emotions experienced in face-to-face and web-based collaborative learning. The results of these studies are reported in four original research articles published in scientific journals. The present studies demonstrate that emotions are important determinants of student behaviour in a web-based learning, and justify the conclusion that interactions on the web can and do have an emotional content. Based on the results of these empirical studies, it can be concluded that the emotions students experience during the web-based learning result mostly from the social interactions rather than from the technological context. The studies indicate that the technology itself is not the only antecedent of students’ emotional reactions in the collaborative web-based learning situations. However, the technology itself also exerted an influence on students’ behaviour. It was found that students’ computer anxiety was associated with their negative expectations of the consequences of using technology-based learning environments in their studies. Moreover, the results also indicated that student behaviours in a WBLE can be divided into three partially overlapping classes: i) collaborative visible ii) non-collaborative invisible activities, and iii) lurking. What is more, students’ emotions experienced during the web-based learning affected how actively they participated in such activities in the environment. Especially lurkers, i.e. students who seldom participated in discussions but frequently visited the online environment, experienced more negatively valenced emotions during the courses than did the other students. This result indicates that such negatively toned emotional experiences can make the lurking individuals less eager to participate in other WBLE courses in the future. Therefore, future research should also focus more precisely on the reasons that cause individuals to lurk in online learning groups, and the development of learning tasks that do not encourage or permit lurking or inactivity. Finally, the results from the study comparing emotional reactions in web-based and face-to-face collaborative learning indicated that the learning by means of web-based communication resulted in more affective reactivity when compared to learning in a face-to-face situation. The results imply that the students in the web-based learning group experienced more intense emotions than the students in the face-to-face learning group.The interpretations of this result are that the lack of means for expressing emotional reactions and perceiving others’ emotions increased the affectivity in the web-based learning groups. Such increased affective reactivity could, for example, debilitate individual’s learning performance, especially in complex learning tasks. Therefore, it is recommended that in the future more studies should be focused on the possibilities to express emotions in a text-based web environment to ensure better means for communicating emotions, and subsequently, possibly decrease the high level of affectivity. However, we do not yet know whether the use of means for communicating emotional expressions via the web (for example, “smileys” or “emoticons”) would be beneficial or disadvantageous in formal learning situations. Therefore, future studies should also focus on assessing how the use of such symbols as a means for expressing emotions in a text-based web environment would affect students’ and teachers’ behaviour and emotional state in web-based learning environments.

Patient hand hygiene compliance in the hemodialysis environment

Hand hygiene compliance of patients receiving hemodialysis treatment is a contemporary discussion topic among health care professionals in the Nephrology Clinic of Helsinki University City Hospital. The purpose of the Final Thesis is to review patient hand hygiene in terms of risks its lack entails and based on the evidence based findings to design an end product as a poster. The poster can be utilised in the Nephrology Clinic's nursing environment to educate and motivate patients to pay specifid attention to the importance of hand hygiene. The method used was a systematic literature review. The most important evidence based findings were extracted from the chosen thirteen scientific articles. All articles were searched from the Cumulative Index to Nursing and Allied Health Literature electronic database. The gathered information was then used to build the content of a patient education tool that for this project was defined as a Poster. The findings in this study showed that transmission of bloodborne infections, like Hepatitis B or C virus can occur through a vascular access and that the consequences of this can be very fatal. Additionally, environmental surfaces such as furniture, door knobs and dialysis machine control knobs were all possible infection sources for the patient receiving hemodialysis treatment. Adherence to good hand hygiene behaviour lowered the risk for infections. The end product of this study is a poster that is targeted to patients undergoing hemodialysis treatment. Using a health promotion agenda in the Poster, it is hoped that patients will pay more attention to the importance of hand hygiene and that they will be more motivated to use aseptic methods such as alcohol based hand rubs in the hemodialysis setting.

Product costing in SAP environment

Kustannuslaskennan ala on muuttumassa. IT teknologian hämmästyttävän nopea kehitys viime vuosina on luonut kustannuslaskennalle uusia mahdollisuuksia. Toisaalta myös kustannuslaskennalle asetetut vaatimukset ovat muuttuneet. Nykyisin kustannustietoutta tarvitaan erityisesti päätöksenteon tueksi. Kaikesta huolimatta yleisesti käytetyt laskentamenetelmät eivät ole muuttuneet. Työn tavoite on tutkia mahdollisia tapoja tuotekohtaisen kustannuslaskennan toteuttamiseksi SAP toiminnanohjausjärjestelmän avulla. Erityisesti toiminnanohjausjärjestelmien nopea kehitys on mahdollistanut aikaisempaa nopeamman ja tarkemman kustannuslaskennan. On kuitenkin muistettava, että järjestelmät ovat vaintyökaluja. On siis erittäin tärkeää valita tarkoituksenmukainen laskentamenetelmä. Työn perimmäinen tarkoitus onkin valita kyseessä olevaan tilanteeseen sopivin menetelmä.Viime vuosien akateemisessa kirjoittelussa on esitelty useita uusia kustannuslaskentamenetelmiä. Toimintolaskennan uusi versio, Time-Driven Activity-Based Costing, on eräs varteenotettava vaihtoehto tuotekohtaisen kustannuslaskennan toteuttamiseksi SAP-ympäristössä. Toinen hyvin soveltuva menetelmä on Resource Consumption Accounting (RCA), joka soveltuu erityisen hyvin SAP-ympäristöön.Molemmilla menetelmillä on hyvät ja huonot puolet, mutta tässä tapauksessa RCA soveltuu tehtävään paremmin. RCA on joustava ja tarjoaa laaja-alaista tietoa. Tästä syystä Resource Consumption Accounting oli paras vaihtoehto.Työssä rakennettu RCA malli testattiin kolmen erilaisen tuotteen historiallisella datalla. RCA:ntuomia mahdollisuuksia pohdittiin ja ongelmia selvitettiin. RCA on hyvin saman tyyppinen yrityksessä jo käytettävän laskentamenetelmän kanssa. Implementointi ei siis olisi mahdoton tehtävä. RCA kuitenkin tarjoaa mahdollisuuksia, joita nykyisellä menetelmällä ei voida saavuttaa.

Accounting system for activity standard costs formulation in ERP environment

Toiminnanohjausjärjestelmän implementointi ja sen mukanaan tuomat muutokset tuotekustannuslaskentaan asettavat haasteita yritykselle. Metallitoimialalla toimivassa yrityksessä on havaittu samat haasteet implementoitaessa SAP R/3 toiminnanohjausjärjestelmää ja sen tuotekustannuslaskentatoiminnallisuutta. SAP R/3 tuotekustannuslogiikka tarvitsee tietoa järjestelmän ulkopuolelta, minkä huomioimatta jättäminen vaikuttaa suoraan laskentatarkkuuteen. Diplomityössä kehitetään sekä standardoitu prosessi että laskentajärjestelmä, joiden avulla pystytään laskemaan tarvittavat niin toimintokustannukset eri teräspalvelukeskuksen kuormituspisteille kuin kustannustenvyörytysarvot. Lasketut arvot muodostavat tarvittavat tekijät SAP R/3 tuotekustannuslaskennan master dataan. Tavoitteena on edesauttaa läpinäkyvän kustannustiedon muodostumista. Diplomityö pohjautuu ns. vesiputousmalliin (SDLC). Ensin tunnistetaan reunaehdot ympäristöstä, jossa tuotekustannuslaskenta toteutetaan. Tämä asettaa joustamattomia komponentteja kehitettävälle laskentajärjestelmälle. Joustavat komponentit sen sijaan antavat vapautta laskentajärjestelmälle. Yhdistämällä joustamattomat ja joustavat komponentit saavutetaan järjestelmä, jolla voidaan täydentää SAP R/3 tuotekustannuslaskennan puutteellisuutta.