Lauhdevoimakapasiteetin ennenaikaisen poistumisen energiataloudelliset vaikutukset

Tässä diplomityössä on tutkittu lauhdekapasiteetin ennenaikaisen markkinoilta poistumisen energiataloudellisia vaikutuksia. Tarkastelu toteutettiin sähkömarkkinamallinnuksen avulla luomalla kaksi erilaista lauhdekapasiteettiskenaariota perustuen arvioituun lauhdekapasiteetin poistumiseen sekä vastavuoroisesti sen säilymiseen markkinoilla. Skenaarioiden vaikutuksia tutkittiin myös herkkyystarkasteluin ja tuloksia analysoitiin energiataloudellisesta näkökulmasta. Työn tavoitteena oli selvittää lauhdekapasiteetin ennenaikaisen poistumisen energiataloudellista kustannusta. Viime vuosien pitkittynyt talouden taantuma on hillinnyt kysynnän ennakoitua kehitystä johtaen alhaiseen sähkön markkinahintatasoon. Samalla tiukentuneet energiatuotannon ympäristövaatimukset asettavat investointirasitteita perinteisille voimalaitoksille heikentäen niiden taloudellisen kannattavuuden edellytyksiä. Markkinasähkön alhainen hintataso yhdessä investointirasitteiden kanssa asettaa haasteita etenkin usein rajatuotantomuotona toimiville lauhdelaitoksille. Alhaisen kannattavuuden seurauksena lauhdekapasiteettia arvioidaan poistuvan ennen teknisen käyttöiän täyttymistä markkinoilta merkittävästi lähivuosina. Kapasiteetin poistuminen kasvattaa oman tuotannon ja kysynnän välistä tehovajetta, minkä vuoksi sähköjärjestelmän nähdään tiukentuvan merkittävästi ennen rakenteilla olevan ydinvoimalaitoksen valmistumista. Työssä toteutettujen mallinnusten perusteella lauhdekapasiteetin väheneminen nostaa sähkön hintatasoa sekä lisää korkeiden hintapiikkien esiintymistä merkittävästi suhteessa korkeamman kapasiteetin tuloksiin. Sähköjärjestelmä on hyvin tiukka ennen rakenteilla olevan ydinvoimalaitoksen käyttöönottoa, minkä vuoksi lauhdekapasiteetin eroavaisuuksien vaikutukset ovat merkittävä etenkin poikkeuksellisen kylmänä vuotena. Lauhdekapasiteetin merkitys pienenee selvästi 2020-luvulla, kun oma tuotantokapasiteetti kasvaa. Työn tulosten perusteella lähivuosina alhaisemman lauhdekapasiteetin aiheuttama vuotuinen energiataloudellinen kustannus on huomattavasti korkeampi kuin laitosten kannattavan ylläpidon vaatima kustannus.

Economic and environmental evaluation of renewable energy systems

The main objective of this thesis is to evaluate the economic and environmental effectiveness of three different renewable energy systems: solar PV, wind energy and biomass energy systems. Financial methods such as Internal Rate of Return (IRR) and Modified Internal Rate of Return (MIRR) were used to evaluate economic competitiveness. Seasonal variability in power generation capability of different renewable systems were also taken into consideration. In order to evaluate the environmental effectiveness of different energy systems, default values in GaBi software were taken by defining the functional unit as 1kWh. The results show that solar PV systems are difficult to justify both in economic as well as environmental grounds. Wind energy performs better in both economic and environmental grounds and has the capability to compete with conventional energy systems. Biomass energy systems exhibit environmental and economic performance at the middle level. In each of these systems, results vary.

Economic Geographical Analysis of The Finnish Paper Industry

The purpose of this academic economic geographical dissertation is to study and describe how competitiveness in the Finnish paper industry has developed during 2001–2008. During these years, the Finnish paper industry has faced economically challenging times. This dissertation attempts to fill the existing gap between theoretical and empirical discussions concerning economic geographical issues in the paper industry. The main research questions are: How have the supply chain costs and margins developed during 2001–2008? How do sales prices, transportation, and fixed and variable costs correlate with gross margins in a spatial context? The research object for this case study is a typical large Finnish paper mill that exports over 90 % of its production. The economic longitudinal research data were obtained from the case mill’s controlled economic system and, correlation (R2) analysis was used as the main research method. The time series data cover monthly economic and manufacturing observations from the mill from 2001 to 2008. The study reveals the development of prices, costs and transportation in the case mill, and it shows how economic variables correlate with the paper mills’ gross margins in various markets in Europe. The research methods of economic geography offer perspectives that pay attention to the spatial (market) heterogeneity. This type of research has been quite scarce in the research tradition of Finnish economic geography and supply chain management. This case study gives new insight into the research tradition of Finnish economic geography and supply chain management and its applications. As a concrete empirical result, this dissertation states that the competitive advantages of the Finnish paper industry were significantly weakened during 2001–2008 by low paper prices, costly manufacturing and expensive transportation. Statistical analysis expose that, in several important markets, transport costs lower gross margins as much as decreasing paper prices, which was a new finding. Paper companies should continuously pay attention to lowering manufacturing and transporting costs to achieve more profitable economic performance. The location of a mill being far from markets clearly has an economic impact on paper manufacturing, as paper demand is decreasing and oversupply is pressuring paper prices down. Therefore, market and economic forecasting in the paper industry is advantageous at the country and product levels while simultaneously taking into account the economic geographically specific dimensions.

An Infant with Food Allergy and Eczema in the Family – The Mental and Economic Burden of Caring

Allergic diseases including food allergy and eczema in an infant in combination with the everyday activities of caring for a family will pose challenges to parents. Only fragments of these challenges are revealed to health care professionals. Families have varying mental, social and economic resources to help them care for an allergic infant, and all such resources are important in determining how families succeed in meeting these challenges and the quality of the infant’s care. This study evaluated the whole burden to the family caused by an infant's allergic disease during the first 24 months of life. As the primary caregiver during this period is usually the mother, her perspective was considered important. Ecocultural theory, which considers families as capable of modifying the positive and negative forces facing them, was taken as the frame of reference. Data were collected as part of an ongoing prospective mother-infant study, and the methods included severity scoring of atopic dermatitis, dietary records, health-related quality of life measurements and assessments of the use of health care services and medications for treating the infant’s eczema, food allergy and asthma. Interviews with mothers were analysed by deductive content analysis on the basis of ecocultural theory and the family empowerment model. The theme “Living an ordinary family life” guided the organization of family activities essential for treating the infant's food allergy and eczema. These activities were sources of both strain and support for the mothers, the allergy-related supporting factors being the mother’s own knowledge of the allergy, hopes for an improvement in the infant’s condition, social support and work. An infant’s food allergy at the age of one year caused considerable strain for the mother in cases where the introduction of new foods into the child’s diet was delayed. This delay was still causing the mother additional strain when the child was 24 months of age. The infants waking at night at the ages of 12 and 24 months because of itching related to eczema caused strain for the mothers. The infants’ health-related quality of life was impaired at ages of 6 and 12 months compared with healthy infants. The principal reasons for impairments were itching, scratching and sleep disturbances at 6 and 12 months and treatment difficulties at 6 months. Problems with getting to sleep were reported at all stages irrespective of eczema and were also present in healthy infants. The economic impact of the treatment of allergic diseases on families during the first 24 months was 131 EUR (2006 value) in cases of eczema and 525 EUR in cases of food allergy. From the societal perspective, the costs of food allergy were a median of 3183 EUR (range 628–11 560 EUR) and of eczema a median of 275 EUR (range 94–1306 EUR). These large variations in costs in food allergy and eczema indicate that disease varies greatly . In conclusion, food allergy and eczema cause extra activities and costs to families which arrange these disease-related activities in such a way that they support the leading family theme “Living an ordinary family life”. Health care professionals should consider this thematic character of family life and disease-related activities in order to ensure that new treatments are sustainable, meaningful and tailored to daily activities. In addition, those mothers who are experiencing difficulties with food allergic infants or infants with eczema should be recognized early and provided with individual encouragement and support from health clinics. In the light of the present results, early detection of symptoms and effective parental guidance can contribute to the well-being and health-related quality of life of the child and family.

Economics of Power-to-Gas integration to wastewater treatment plant

Solar and wind power produce electricity irregularly. This irregular power production is problematic and therefore production can exceed the need. Thus sufficient energy storage solutions are needed. Currently there are some storages, such as flywheel, but they are quite short-term. Power-to-Gas (P2G) offers a solution to store energy as a synthetic natural gas. It also improves nation’s energy self-sufficiency. Power-to-Gas can be integrated to an industrial or a municipal facility to reduce production costs. In this master’s thesis the integration of Power-to-Gas technologies to wastewater treatment as a part of the VTT’s Neo-Carbon Energy project is studied. Power-to-Gas produces synthetic methane (SNG) from water and carbon dioxide with electricity. This SNG can be considered as stored energy. Basic wastewater treatment technologies and the production of biogas in the treatment plant are studied. The utilisation of biogas and SNG in heat and power production and in transportation is also studied. The integration of the P2G to wastewater treatment plant (WWTP) is examined mainly from economic view. First the mass flows of flowing materials are calculated and after that the economic impact based on the mass flows. The economic efficiency is evaluated with Net Present Value method. In this thesis it is also studied the overall profitability of the integration and the key economic factors.

Commercialization of Biopharmaceuticals

Biotekniikkaa pidetään yhtenä lupaavimmista nykyään tunnetuista teknologioista. Biotekniikan alalta erityisesti uusien lääkeaineiden kehittely on saavuttanut huomiota julkisuudessa. Biotekniikkaa lääkeaineiden kehittämiseen soveltavien yritysten määrä on kasvanut nopeasti viimeisen vuosikymmenen aikana, mutta tämänhetkiset tulokset osoittavat, että yritykset voisivat hyötyä riskien hallintaan ja kaupallistamiseen liittyvien prosessien kehittämisestä. Tutkielma keskittyy biolääkkeiden kaupallistamiseen, erityisesti suomalaisten uusien biolääkeyritysten kannalta. Tutkielma jakaantuu kahteen osaan: ensimmäinen osa tutkii kaupallistamista käsitteenä ja biolääkeliiketoiminnan erityispiirteitä. Toinen osa keskittyy kaupallistamisen empiiriseen tutkimukseen, joka kattaa viisi suomalaista uutta biolääkeyritystä. Empiirisen osan tavoitteena oli tunnistaa ne keinot, jotka auttavat menestyksekkään kaupallistamisprosessin luomisessa tuotekehitysvaiheen läpäisseelle lääkeaineelle. Saavutetut tulokset voidaan tiivistää neljän kriittisen menestystekijän ympärille, jotka ovat 1) tuote, 2) viestintä, 3) uskottavuus ja 4) yhteistyökumppanin valinta. Ensimmäinen menestystekijä on ainutlaatuinen biolääke, joka parantaa kansantaloudellisesti merkittäviä tauteja. Toisen menestystekijän avulla yritys viestittää uudesta ainutlaatuisesta tuotteestaan mahdollisille yhteistyökumppaneilleen. Kolmas menestystekijä kohdistuu yrityksen uskottavuuteen uutena korkean teknologian biolääkeaineiden kehittäjänä. Uskottavuustekijä on erityisen tärkeä suhteiden luomisessa kansainvälisiin lääkeyrityksiin. Neljäs tekijä keskittyy yhteistyökumppanin valintaan, joka alan erityisluonteesta johtuen on tärkeä uudelle biolääkeyritykselle. Viimeiseksi havaittiin, että uusi biolääkeyritys virtuaalisen rakenteensa vuoksi tarvitsee hyvät johdon suhdemarkkinointikyvyt.

Lämpökäsittelylaitosten energiatalouden parantaminen

Työn tavoitteena oli Imatra Steel Oy Ab:n jatkojalostusosaston lämpökäsittelylaitosten energiatalouden parantaminen. Työssä etsittiin lämpökäsittelylaitoksen energiatalouteen haitallisesti vaikuttavia tekijöitä ja pyrittiin löytämään ratkaisuja energiatalouden parantamiseksi.Työtä varten on kerätty tietoa kirjallisista lähteistä, Imatra Steel Oy Ab:n henkilökunnalta, insinööritoimistoilta, lämpökäsittelyuunien valmistajilta ja muilta asiantuntijoilta, jotka ovat olleet tekemisissä lämpökäsittelylaitosten, lämpökäsittelyuunien tai niihin läheisesti liittyvien energiataloudellisien tekijöiden parissa.Imatra Steel Oy Ab:n lämpökäsittelylaitosten suurimmat energiankuluttajat ovat lämpökäsittelyuunit, jotka ovat rakennettu pääosin vuosina 1965 ja 1971, jolloin energiankulutukseen ja sen aiheuttamiin kustannuksiin ei tarvinnut kiinnittää samalla tavoin huomiota kuin nykyisin. Työssä keskitytäänkin pääasiassa uunien energiatalouteen.Lämpökäsittelylaitosten energiatalouden parantamisessa on ensin keskityttävä primäärienergiana käytettävän maakaasun kulutuksen vähentämiseen, jonka jälkeen voidaan keskittyä uuneista syntyvän hukkalämmön hyödyntämiseen. Jotta lämpökäsittelyuunit saataisiin toimimaan energiataloudellisesti tehokkaasti ja nykyisessä markkinatilanteessa kilpailukykyisesti, pitäisi uuneille laatia oma kehitysohjelma. Uunien energiatalouden seuranta ja kehittäminen edellyttää nykyisten jatkuvatoimisesti mitattavien prosessitietojen ja erillisillä mittauksilla kerättävän tiedon nykyistä tehokkaampaa hyödyntämistä sekä uusien ennen mittaamattomien prosessiparametrien hyödyntämistä. Tulevaisuudessa toteutettava prosessitietojen keräysjärjestelmä antaakin aivan uusia mahdollisuuksia uunien kehittämiseen ja seurantaan.

Commercializing technology in transitional economies. Case: Nanotechnology in Russia

The aim of the study is to find out “What are the challenges to overcome for the successful nanotechnology commercialization in Russia?” Working closely with the case country was definitely an advantage when it comes to the understanding of the research subject. The thesis is divided to two parts: first part examines the concept of technology commercialization and identifies unique aspects of the process in context of nanotechnology. Second part is dedicated to an empirical research, investigating current status of nanotechnology commercialization in Russia. For the purpose of this study, Russian and international scientists, researchers, entrepreneurs, industry and government representatives were interviewed systematically during 2007 – 2009. Based on the research done it can be concluded that immense public funding provides necessary support for the development of Russian nanotechnology industry. However, investments alone do not address important structural shortcomings of a national innovation system, which in turn slow down the progress. Taking into consideration gap between science and business and challenging IPR legislation, expected significant economic impact in Russia may be overestimated. Nevertheless it should be noted that development of nanotechnology is advancing rapidly and therefore, the state of commercialization is changing accordingly, even while this lines are written.

The Impact of Foreign Direct Investment Inflows on the Economic Growth of Bangladesh. The Roles of Infrastructural Facilities

Foreign direct investment (FDI) inflow has been a key concern for Bangladesh to obtain additional support for the economic development. The Government of Bangladesh continuously competing with other South Asian countries and putting more effort to increase the number of FDI inflows in the country. From the country’s perspective, the constant increasing rate of economic growth shows a positive outcome of FDI inflow. However, the country still not performing up to the mark to pull enough FDI inflows to its potential. Thus, this study discusses about the major determinants and factors affecting FDI inflows in Bangladesh. Among those determinants and factors, infrastructural facility is considered as the most important to affect FDI inflows. FDI inflow is fundamentally depending upon infrastructural facilities to achieve its desire success. Foreign investors take this issue very seriously because based on this they can measure their ease of doing business in the host country. Despite of providing a large market size, due to having weak and lack of infrastructural facilities, Bangladesh is facing trouble in drawing attention of the foreign investors. In order to make the infrastructural facilities happen, it is highly required to organize each of the systems under of it. The body of this study discussed about the weak infrastructures in Bangladesh such as transport and communication, power and energy, education system, and governance services. Improvement in one of these systems cannot provide valuable positive changes on FDI inflows. It requires improvement in all the weak systems to grasp multinational companies and attract foreign investors. On the basis of this research problem, research questions are established. Both qualitative and quantitative methods are used to answer the research questions. Furthermore, several theories have been applied to justify possible scenarios from the research problem. In addition, the history in between Bangladesh, trade liberalization, and FDI inflows is presented briefly.

The Impact of Foreign Direct Investment Inflows on the Economic Growth of Bangladesh. The Roles of Infrastructural Facilities

Foreign direct investment (FDI) inflow has been a key concern for Bangladesh to obtain additional support for the economic development. The Government of Bangladesh continuously competing with other South Asian countries and putting more effort to increase the number of FDI inflows in the country. From the country’s perspective, the constant increasing rate of economic growth shows a positive outcome of FDI inflow. However, the country still not performing up to the mark to pull enough FDI inflows to its potential. Thus, this study discusses about the major determinants and factors affecting FDI inflows in Bangladesh. Among those determinants and factors, infrastructural facility is considered as the most important to affect FDI inflows. FDI inflow is fundamentally depending upon infrastructural facilities to achieve its desire success. Foreign investors take this issue very seriously because based on this they can measure their ease of doing business in the host country. Despite of providing a large market size, due to having weak and lack of infrastructural facilities, Bangladesh is facing trouble in drawing attention of the foreign investors. In order to make the infrastructural facilities happen, it is highly required to organize each of the systems under of it. The body of this study discussed about the weak infrastructures in Bangladesh such as transport and communication, power and energy, education system, and governance services. Improvement in one of these systems cannot provide valuable positive changes on FDI inflows. It requires improvement in all the weak systems to grasp multinational companies and attract foreign investors. On the basis of this research problem, research questions are established. Both qualitative and quantitative methods are used to answer the research questions. Furthermore, several theories have been applied to justify possible scenarios from the research problem. In addition, the history in between Bangladesh, trade liberalization, and FDI inflows is presented briefly

Energy and raw material consumption analysis of powder bed fusion: case study: CNC machining and laser additive manufacturing

Laser additive manufacturing (LAM), known also as 3D printing, is a powder bed fusion (PBF) type of additive manufacturing (AM) technology used to manufacture metal parts layer by layer by assist of laser beam. The development of the technology from building just prototype parts to functional parts is due to design flexibility. And also possibility to manufacture tailored and optimised components in terms of performance and strength to weight ratio of final parts. The study of energy and raw material consumption in LAM is essential as it might facilitate the adoption and usage of the technique in manufacturing industries. The objective this thesis was find the impact of LAM on environmental and economic aspects and to conduct life cycle inventory of CNC machining and LAM in terms of energy and raw material consumption at production phases. Literature overview in this thesis include sustainability issues in manufacturing industries with focus on environmental and economic aspects. Also life cycle assessment and its applicability in manufacturing industry were studied. UPLCI-CO2PE! Initiative was identified as mostly applied exiting methodology to conduct LCI analysis in discrete manufacturing process like LAM. Many of the reviewed literature had focused to PBF of polymeric material and only few had considered metallic materials. The studies that had included metallic materials had only measured input and output energy or materials of the process and compared to different AM systems without comparing to any competitive process. Neither did any include effect of process variation when building metallic parts with LAM. Experimental testing were carried out to make dissimilar samples with CNC machining and LAM in this thesis. Test samples were designed to include part complexity and weight reductions. PUMA 2500Y lathe machine was used in the CNC machining whereas a modified research machine representing EOSINT M-series was used for the LAM. The raw material used for making the test pieces were stainless steel 316L bar (CNC machined parts) and stainless steel 316L powder (LAM built parts). An analysis of power, time, and the energy consumed in each of the manufacturing processes on production phase showed that LAM utilises more energy than CNC machining. The high energy consumption was as result of duration of production. Energy consumption profiles in CNC machining showed fluctuations with high and low power ranges. LAM energy usage within specific mode (standby, heating, process, sawing) remained relatively constant through the production. CNC machining was limited in terms of manufacturing freedom as it was not possible to manufacture all the designed sample by machining. And the one which was possible was aided with large amount of material removed as waste. Planning phase in LAM was shorter than in CNC machining as the latter required many preparation steps. Specific energy consumption (SEC) were estimated in LAM based on the practical results and assumed platform utilisation. The estimated platform utilisation showed SEC could reduce when more parts were placed in one build than it was in with the empirical results in this thesis (six parts).

Apply of energy storages in electricity distribution networks and reserve capacity applications

The Thesis is dedicated to development of an operative tool to support decision making of battery energy storages implementation in distribution networks. The basics of various battery technologies, their perspectives and challenges are represented in the Thesis. Mathematical equations that describe economic effect from battery energy storage installation are offered. The main factors that influence profitability of battery settings have been explored and mathematically defined. Mathematical model and principal trends of battery storage profitability under an impact of the major factors are determined. The meaning of annual net value was introduced to show the difference between savings and required costs. The model gives a clear vision for dependencies between annual net value and main factors. Proposals for optimal network and battery characteristics are suggested.

Deinking sludge utilization possibilities: technical, economic, and environmental assessments

This report introduces the ENPI project called “EMIR - Exploitation of Municipal and Industrial Residues” which was executed in a co-operation between Lappeenranta University of Technology (LUT), Saint Petersburg State University of Economics (SPbSUE), Saint Petersburg State Technical University of Plant Polymers (SPbSTUPP) and industrial partners from both Leningrad Region (LR), Russia and Finland. The main targets of the research were to identify the possibilities for deinking sludge management scenarios in co-operation with partner companies, to compare the sustainability of the alternatives, and to provide recommendations for the companies in the Leningrad Region on how to best manage deinking sludge. During the literature review, 24 deinking sludge utilization possibilities were identified, the majority falling under material recovery. Furthermore, 11 potential utilizers of deinking sludge were found within the search area determined by the transportation cost. Each potential utilizer was directly contacted in order to establish cooperation for deinking sludge utilization. Finally, four companies, namely, “Finnsementti” – a cement plant in Finland (S1), “St.Gobian Weber” – a light-weight aggregate plant in Finland (S2), “LSR-Cement” – a cement plant in LR (S3), and “Rockwool” – a stone wool plant in LR (S4) were seen as the most promising partners and were included in the economic and environmental assessments. Economic assessment using cost-benefit analysis (CBA) indicated that substitution of heavy fuel oil with dry deinking sludge in S2 was the most feasible option with a benefit/cost ratio (BCR) of 3.6 when all the sludge was utilized. At the same time, the use of 15% of the total sludge amount (the amount that could potentially be treated in the scenario) resulted in a BCR of only 0.16. The use of dry deinking sludge in the production of cement (S3) is a slightly more feasible option with a BCR of 1.1. The use of sludge in stone wool production is feasible only when all the deinking sludge is used and burned in an existing incineration plant. The least economically feasible utilization possibility is the use of sludge in cement production in Finland (S1) due to the high gate fee charged. Environmental assessment was performed applying internationally recognized life cycle assessment (LCA) methodologies: ISO 14040 and ISO 14044. The results of a consequential LCA stated that only S1 and S2 lead to a reduction of all environmental impacts within the impact categories chosen compared to the baseline scenario where deinking sludge is landfilled. Considering S1, the largest reduction of 13% was achieved for the global warming potential (GWP), whereas for S2, the largest decrease of abiotic depletion potential (ADP) was by 1.7%, the eutrophication potential (EP) by 1.8%, and a GWP of 2.1% was documented. In S3, the most notable increase of ADP and acidification potential (AP) by 2.6 and 1.5% was indicated, while the GWP was reduced by 12%, the largest out of all the impact categories. In S4, ADP and AP increased by 2.3 and 2.1% respectively, whereas ODP was reduced by 25%. During LCA, it was noticed that substitution of fuels causes a greater reduction of environmental impact (S1 and S2) than substitution of raw materials (S3 and S4). Despite a number of economically and environmentally acceptable deinking sludge utilization methods being assessed in the research, evaluation of bottlenecks and communications with companies’ representatives uncovered the fact that the availability of the raw materials consumed, and the risks associated with technological problems resulting from the sludge utilization, limited the willingness of industrial partners to start deinking sludge utilization. The research results are of high value for decision-makers at already existing paper mills since the result provide insights regarding alternatives to the deinking sludge utilization possibilities already applied. Thus, the research results support the maximum economic and environmental value recovery from waste paper utilization.

Excavation-drier method of energy-peat extraction reduces long-term climatic impact

Climatic impacts of energy-peat extraction are of increasing concern due to EU emissions trading requirements. A new excavation-drier peat extraction method has been developed to reduce the climatic impact and increase the efficiency of peat extraction. To quantify and compare the soil GHG fluxes of the excavation drier and the traditional milling methods, as well as the areas from which the energy peat is planned to be extracted in the future (extraction reserve area types), soil CO2, CH4 and N2O fluxes were measured during 2006–2007 at three sites in Finland. Within each site, fluxes were measured from drained extraction reserve areas, extraction fields and stockpiles of both methods and additionally from the biomass driers of the excavation-drier method. The Life Cycle Assessment (LCA), described at a principal level in ISO Standards 14040:2006 and 14044:2006, was used to assess the long-term (100 years) climatic impact from peatland utilisation with respect to land use and energy production chains where utilisation of coal was replaced with peat. Coal was used as a reference since in many cases peat and coal can replace each other in same power plants. According to this study, the peat extraction method used was of lesser significance than the extraction reserve area type in regards to the climatic impact. However, the excavation-drier method seems to cause a slightly reduced climatic impact as compared with the prevailing milling method.