Paperikoneen käyttöönoton onnistumisen riippuvuus valmistelutyöstä

Paperikoneinvestointi toteutetaan projekteina, joista muodostuvaa ketjua kutsutaan projektien elinkaareksi. Toteutusketjun viimeinen lenkki on käynnistykseen huipentuva käyttöönotto. Hyvä käyttöönotto palvelee investointia. Käyttöönotoissa koetaan erilaisia ongelmatilanteita, joista osa on satunnaisesti tai usein toistuvia. Investoinnin onnistumisen ja aikataulun asettama paine luo tilanteiden selvittämiseen erityishaasteita. Aina ei selvitä ilman takaiskuja. Tutkimustavoitteena oli kartoittaa käyttöönoton yleiset ongelmat ja niiden yhteydet projektihistoriaan, sekä ne projektinhallinnan osa-alueet, joita parantamalla varmistetaan käyttöönoton ja investoinnin onnistuminen. Tutkimus pohjautuu erilaisistainvestointiprojekteista ja käyttöönotoista saatuihin kokemuksiin, haastatteluihin (3 kpl) ja kyselypalautteeseen (42 kpl). Investoinnin onnistumisedellytykset luodaan projektihistoriassa, käyttöönotossa ne viimeistellään. Onnistuminen mitataan tuotto-odotusten saavuttamisena aikataulussa, johon vaikuttavia tekijöitä ovat tuotannon hallinta, käyttövarmuus ja markkinat. Käyttöönoton onnistumista tulee arvioida käyttöönottotehtävistäsuoriutumisen pohjalta, ei pelkästään investoinnille asetettujen aikataulu- ja tuotantotavoitteiden (laatu, määrä, hallinta) saavuttamisena, kuten usein tapahtuu. Tulosten perusteella käyttöönoton merkittävimmät ongelmat ovat tiedonkulun puutteet, ohjelmallisten korjausten suuri määrä ja palautumisajan riittämättömyys. Tärkeimmät painotukset ovat laiterikkojen estäminen, ohjelmavirheiden korjaaminen ja henkilöstön osaamisen varmentaminen. Konelinjan vaikeimmin hallittava osa on radan päänvienti. Osapuolten poikkeavat näkökulmat sekä työn laadun merkitys testauksissa, koulutuksissa ja kenttätoiminnoissa nousee tuloksista myös vahvasti esiin. Tutkimus on selvittänyt sille asetetut tavoitteet. Käyttöönoton merkittävimmät ongelmat syntyvät sen lähihistoriassa: testauksissa, koulutuksessa ja kenttätoiminnoissa. Käyttöönoton onnistumiseksi tulee painotusprojektinhallinnassa keskittää käynnistysvaiheen suunnitteluun sekä kenttätoimintojen hallintaan.

Establishing intercompany relationships: Motives and methods for successful collaborative engagement

This study explores the early phases of intercompany relationship building, which is a very important topic for purchasing and business development practitioners as well as for companies' upper management. There is a lot ofevidence that a proper engagement with markets increases a company's potential for achieving business success. Taking full advantage of the market possibilities requires, however, a holistic view of managing related decision-making chain. Most literature as well as the business processes of companies are lacking this holism. Typically they observe the process from the perspective of individual stages and thus lead to discontinuity and sub-optimization. This study contains a comprehensive introduction to and evaluation of literature related to various steps of the decision-making process. It is studied from a holistic perspective ofdetermining a company's vertical integration position within its demand/ supplynetwork context; translating the vertical integration objectives to feasible strategies and objectives; and operationalizing the decisions made through engagement with collaborative intercompany relationships. The empirical part of the research has been conducted in two sections. First the phenomenon of intercompany engagement is studied using two complementary case studies. Secondly a survey hasbeen conducted among the purchasing and business development managers of several electronics manufacturing companies, to analyze the processes, decision-makingcriteria and success factors of engagement for collaboration. The aim has been to identify the reasons why companies and their management act the way they do. As a combination of theoretical and empirical research an analysis has been produced of what would be an ideal way of engaging with markets. Based on the respective findings the study concludes by proposing a holistic framework for successful engagement. The evidence presented throughout the study demonstrates clear gaps, discontinuities and limitations in both current research and in practical purchasing decision-making chains. The most significant discontinuity is the identified disconnection between the supplier selection process and related criteria and the relationship success factors.

Ion-exchange resins as stationary phase in reactive chromatography

Dynamic behavior of bothisothermal and non-isothermal single-column chromatographic reactors with an ion-exchange resin as the stationary phase was investigated. The reactor performance was interpreted by using results obtained when studying the effect of the resin properties on the equilibrium and kinetic phenomena occurring simultaneously in the reactor. Mathematical models were derived for each phenomenon and combined to simulate the chromatographic reactor. The phenomena studied includes phase equilibria in multicomponent liquid mixture¿ion-exchange resin systems, chemicalequilibrium in the presence of a resin catalyst, diffusion of liquids in gel-type and macroporous resins, and chemical reaction kinetics. Above all, attention was paid to the swelling behavior of the resins and how it affects the kinetic phenomena. Several poly(styrene-co-divinylbenzene) resins with different cross-link densities and internal porosities were used. Esterification of acetic acid with ethanol to produce ethyl acetate and water was used as a model reaction system. Choosing an ion-exchange resin with a low cross-link density is beneficial inthe case of the present reaction system: the amount of ethyl acetate as well the ethyl acetate to water mole ratio in the effluent stream increase with decreasing cross-link density. The enhanced performance of the reactor is mainly attributed to increasing reaction rate, which in turn originates from the phase equilibrium behavior of the system. Also mass transfer considerations favor the use ofresins with low cross-link density. The diffusion coefficients of liquids in the gel-type ion-exchange resins were found to fall rapidly when the extent of swelling became low. Glass transition of the polymer was not found to significantlyretard the diffusion in sulfonated PS¿DVB ion-exchange resins. It was also shown that non-isothermal operation of a chromatographic reactor could be used to significantly enhance the reactor performance. In the case of the exothermic modelreaction system and a near-adiabatic column, a positive thermal wave (higher temperature than in the initial state) was found to travel together with the reactive front. This further increased the conversion of the reactants. Diffusion-induced volume changes of the ion-exchange resins were studied in a flow-through cell. It was shown that describing the swelling and shrinking kinetics of the particles calls for a mass transfer model that explicitly includes the limited expansibility of the polymer network. A good description of the process was obtained by combining the generalized Maxwell-Stefan approach and an activity model that was derived from the thermodynamics of polymer solutions and gels. The swelling pressure in the resin phase was evaluated by using a non-Gaussian expression forthe polymer chain length distribution. Dimensional changes of the resin particles necessitate the use of non-standard mathematical tools for dynamic simulations. A transformed coordinate system, where the mass of the polymer was used as a spatial variable, was applied when simulating the chromatographic reactor columns as well as the swelling and shrinking kinetics of the resin particles. Shrinking of the particles in a column leads to formation of dead volume on top of the resin bed. In ordinary Eulerian coordinates, this results in a moving discontinuity that in turn causes numerical difficulties in the solution of the PDE system. The motion of the discontinuity was eliminated by spanning two calculation grids in the column that overlapped at the top of the resin bed. The reactive and non-reactive phase equilibrium data were correlated with a model derived from thethermodynamics of polymer solution and gels. The thermodynamic approach used inthis work is best suited at high degrees of swelling because the polymer matrixmay be in the glassy state when the extent of swelling is low.

The Sottunga-Jurmo shear zone : structure and deformation history of a crustal-scale ductile shear zone in SW Finland

The aim of this study is to gain a better understanding of the structure and the deformation history of a NW-SE trending regional, crustal-scale shear structure in the Åland archipelago, SW Finland, called the Sottunga-Jurmo shear zone (SJSZ). Approaches involving e.g. structural geology, geochronology, geochemistry and metamorphic petrology were utilised in order to reconstruct the overall deformation history of the study area. The study therefore describes several features of the shear zone including structures, kinematics and lithologies within the study area, the ages of the different deformation phases (ductile to brittle) within the shear zone, as well as some geothermobarometric results. The results indicate that the SJSZ outlines a major crustal discontinuity between the extensively migmatized rocks NE of the shear zone and the unmigmatised, amphibolite facies rocks SW of the zone. The main SJSZ shows overall dextral lateral kinematics with a SW-side up vertical component and deformation partitioning into pure shear and simple shear dominated deformation styles that was intensified toward later stages of the deformation history. The deformation partitioning resulted in complex folding and refolding against the SW margin of the SJSZ, including conical and sheath folds, and in a formation of several minor strike-slip shear zones both parallel and conjugate to the main SJSZ in order to accommodate the regional transpressive stresses. Different deformation phases within the study area were dated by SIMS (zircon U-Pb), ID-TIMS (titanite U-Pb) and 40Ar/39Ar (pseudotachylyte wholerock) methods. The first deformation phase within the ca. 1.88 Ga rocks of the study area is dated at ca. 1.85 Ga, and the shear zone was reactivated twice within the ductile regime (at ca. 1.83 Ga and 1.79 Ga), during which the strain was successively increasingly partitioned into the main SJSZ and the minor shear zones. The age determinations suggest that the orogenic processes within the study area did not occur in a temporal continuum; instead, the metamorphic zircon rims and titanites show distinct, 10-20 Ma long breaks in deformation between phases of active deformation. The results of this study further imply slow cooling of the rocks through 600-700ºC so that at 1.79 Ga, 2 the temperature was still at least 600ºC. The highest recorded metamorphic pressures are 6.4-7.1 kbar. At the late stages or soon after the last ductile phase (ca. 1.79 Ga), relatively high-T mylonites and ultramylonites were formed, witnessing extreme deformation partitioning and high strain rates. After the rocks reached lower amphibolite facies to amphibolite-greenschist facies transitional conditions (ca. 500-550ºC), they cooled rapidly, probably due to crustal uplift and exhumation. The shear zone was reactivated at least once within the semi-brittle to brittle regime between ca. 1.79 Ga and 1.58 Ga, as evidenced by cataclasites and pseudotachylytes. In summary, the results of this study suggest that the Sottunga-Jurmo shear zone (and the South Finland shear zone) defines a major crustal discontinuity, and played a central role in accommodating the regional stresses during and after the Svecofennian orogeny.

Developing a new service business model for an industrial supplier

Project business companies are moving towards solution offering in order to avoid discontinuity of project business and to gain other advantages. An option to implement solution business could be BOOT (Build-Own-Operate-Transfer) business model where a company is given the responsibilities to design, finance, build, own, operate and maintain for example production facilities of a client. The contract is made for 10-30 years, the client pays the solution during this period of time and after contract termination the facilities are transferred to the ownership of the client. The purpose of this study was to provide knowledge about BOOT business model for the company in question and its employees and to create a settlement of the advantages, disadvantages and risks of it. Furthermore, one of the main objectives was to create a description of the network needed to run a BOOT project. The objectives were met through a literature study and an explorative case study with appropriate interviews. Based on this study, the company should be able to evaluate the applicability of BOOT business model to their business environment better.

Managing regulatory risks when outsourcing network-related services in the electricity distribution sector

Deregulation of the electricity sector liberated the electricity sale and production for competitive forces while in the network business, electricity transmission and distribution, natural monopoly positions were recognised. Deregulation was accompanied by efficiencyoriented thinking on the whole electricity supply industry. For electricity distribution this meant a transition from a public service towards profit-driven business guided by economic regulation. Regulation is the primary means to enforce societal and other goals in the regulated monopoly sector. The design of economic regulation is concerned with two main attributes; end-customer price and quality of electricity distribution services. Regulation limits the costs of the regulated company but also defines the desired quality of monopoly services. The characteristics of the regulatory framework and the incentives it provides are therefore decisive for the electricity distribution sector. Regulation is not a static factor; changes in the regulatory practices cause discontinuity points, which in turn generate risks. A variety of social and environmental concerns together with technological advancements have emphasised the relevance of quality regulation, which is expected to lead to the large-scale replacement of overhead lines with underground cables. The electricity network construction activity is therefore currently witnessing revolutionary changes in its competitive landscape. In a business characterised by high statutory involvement and a high level of sunk costs, recognising and understanding the regulatory risks becomes a key success factor. As a response, electricity distribution companies have turned into outsourcing to attain efficiency and quality goals. This doctoral thesis addresses the impacts of regulatory risks on electricity network construction, which is a commonly outsourced activity in the electricity distribution network sector. The chosen research approach is characterised as an action analytical research on account of the fact that regulatory risks are greatly dependent on the individual nature of the regulatory regime applied in the electricity distribution sector. The main contribution of this doctoral thesis is to develop a concept for recognising and managing the business risks stemming from economic regulation. The degree of outsourcing in the sector is expected to increase in years to come. The results of the research provide new knowledge to manage the regulatory risks when outsourcing services.

Projektimarkkinoinnin haasteet ja suhteiden tunnistaminen

Tässä tutkimustyössä oli tavoitteena tutkia projektimarkkinointiin liittyviä haasteita, joita Andritz Oy Wood Processing on kohdannut yhdessä sellu- ja paperiteollisuuden projektissa ja kolmessa puupohjaisen biomassavoimalaitoksen projektissa. Työn tarkoitus oli nostaa esille millaisia yhteisiä haasteita näiden tutkittujen projektien välillä on olemassa ja mihin työn kohteena olevan yrityksen tulisi keskittyä projektimarkkinointiprosessissa. Teoriaosiossa käsitellään monipuolisesti projektiliiketoimintaan liittyviä teorioita. Ensimmäiseksi tarkastellaan projektimarkkinointi- ja projektimarkkinointiprosessimalleja. Näiden jälkeen tutkitaan D-U-C-mallia (epäjatkuvuus, ainutkertaisuus ja monimutkaisuus), joka esiintyy hyvin monen tutkijan tutkimuksissa, kun käsitellään projektiliiketoimintaa. Lopuksi teoriaosiossa tarkastellaan asiakassuhteita ja miljööanalyysia projektiliiketoiminnassa. Tutkimuksen empiirisessä ensimmäisessä osiossa käydään läpi projektimarkkinointiin liittyvät haasteet, jotka löytyivät tutkituista tapausesimerkeistä. Tämän jälkeen jokaisesta projektista on laadittu miljöökartoitus, jonka perusteella nähdään projektien miljöiden vaihtelevuus. Viimeisenä asiana empiirisessä osiossa käydään läpi perusteet, jotka vaikuttivat projektitoimittajan valintaan. Teoreettisen ja empiirisen aineiston pohjalta on laadittu yritykselle suosituksia, joiden uskotaan parantavan yrityksen kilpailukykyä projektiliiketoiminnassa. Esiin nousseet asiat projektimarkkinoinnissa ovat monille itsestään selvyyksiä, mutta niiden toteuttamisessa on vielä paljon kehitettävää.

The Sottunga-Jurmo shear zone : structure and deformation history of a crustal-scale ductile shear zone in SW Finland

The aim of this study is to gain a better understanding of the structure and the deformation history of a NW-SE trending regional, crustal-scale shear structure in the Åland archipelago, SW Finland, called the Sottunga-Jurmo shear zone (SJSZ). Approaches involving e.g. structural geology, geochronology, geochemistry and metamorphic petrology were utilised in order to reconstruct the overall deformation history of the study area. The study therefore describes several features of the shear zone including structures, kinematics and lithologies within the study area, the ages of the different deformation phases (ductile to brittle) within the shear zone, as well as some geothermobarometric results. The results indicate that the SJSZ outlines a major crustal discontinuity between the extensively migmatized rocks NE of the shear zone and the unmigmatised, amphibolite facies rocks SW of the zone. The main SJSZ shows overall dextral lateral kinematics with a SW-side up vertical component and deformation partitioning into pure shear and simple shear dominated deformation styles that was intensified toward later stages of the deformation history. The deformation partitioning resulted in complex folding and refolding against the SW margin of the SJSZ, including conical and sheath folds, and in a formation of several minor strike-slip shear zones both parallel and conjugate to the main SJSZ in order to accommodate the regional transpressive stresses. Different deformation phases within the study area were dated by SIMS (zircon U-Pb), ID-TIMS (titanite U-Pb) and 40Ar/39Ar (pseudotachylyte wholerock) methods. The first deformation phase within the ca. 1.88 Ga rocks of the study area is dated at ca. 1.85 Ga, and the shear zone was reactivated twice within the ductile regime (at ca. 1.83 Ga and 1.79 Ga), during which the strain was successively increasingly partitioned into the main SJSZ and the minor shear zones. The age determinations suggest that the orogenic processes within the study area did not occur in a temporal continuum; instead, the metamorphic zircon rims and titanites show distinct, 10-20 Ma long breaks in deformation between phases of active deformation. The results of this study further imply slow cooling of the rocks through 600-700ºC so that at 1.79 Ga, 2 the temperature was still at least 600ºC. The highest recorded metamorphic pressures are 6.4-7.1 kbar. At the late stages or soon after the last ductile phase (ca. 1.79 Ga), relatively high-T mylonites and ultramylonites were formed, witnessing extreme deformation partitioning and high strain rates. After the rocks reached lower amphibolite facies to amphibolite-greenschist facies transitional conditions (ca. 500-550ºC), they cooled rapidly, probably due to crustal uplift and exhumation. The shear zone was reactivated at least once within the semi-brittle to brittle regime between ca. 1.79 Ga and 1.58 Ga, as evidenced by cataclasites and pseudotachylytes. In summary, the results of this study suggest that the Sottunga-Jurmo shear zone (and the South Finland shear zone) defines a major crustal discontinuity, and played a central role in accommodating the regional stresses during and after the Svecofennian orogeny.

Formal development and quantitative verification of dependable systems

-

Trilling race : the political economy of racialised visual-aural encounters

This thesis investigates the matter of race in the context of Finnish language acquisition among adult migrants in Finland. Here matter denotes both the materiality of race and how race comes to matter. Drawing primarily on an auto/ethno/graphic account of learning the Finnish language as a participant in the Finnish for foreigners classes, this thesis problematises the ontology and epistemology of race, i.e., what race is, how it is known, and what an engagement with race entails. Taking cues from the bodily practices of learning the Finnish trill or the rolling r, this study proposes a notion of “trilling race” and argues for an onto-epistemological dis/continuity that marks race’s arrival. The notion of dis/continuity reworks the distinction between continuity and discontinuity, and asks about the how of the arrival of any identity, the where, and the when. In so doing, an analysis of “trilling race” engages with one of the major problematics that has exercised much critical attention, namely: how to read race differently. That is, to rethink the conundrum of the need to counter “representational weight” (Puar 2007, 191) of race on the one hand, and to account for the racialised lived realities on the other. The link between a study of the phenomenon of host country language acquisition and an examination of the question of race is not as obvious as it might seem. For example, what does the argument that the process of language learning is racialised actually imply? Does it mean that race, as a process of racialisation or an ongoing configuration of sets of power relations, exerts force from an outside on the otherwise neutral process of learning the host country language? Or does it mean that race, as an identity category, presents as among the analytical perspectives, along with gender and class for instance, of the phenomenon of host country language acquisition? With these questions in mind, and to foreground the examination of the question of race in the context of Finnish language acquisition among adult migrants, this thesis opens with a discussion of the art installation Finnexia by Lisa Erdman. Finnexia is a fictitious drug said to facilitate Finnish language learning through accelerating the cognitive learning process and reducing the anxiety of speaking the Finnish language. Not only does the Finnexia installation make visible the ways in which the lack of skill in Finnish is fgured as the threshold – a border that separates the inside from the outside – to integration, but also, and importantly, it raises questions about the nature of difference, and the process of differentiation that separates the individual from the social, fact from fiction, nature from culture. These puzzles animate much of the analysis in this dissertation. These concerns continue to be addressed in the rest of part one. Whereas chapter two offers a reconsideration of the ambiguities of ethnisme/ethnicity and race, chapter three dilates on the methodological implications of a conception of the dis/continuity of race. Part two focuses on the matter of race and examines the political economy of visual-aural encounters, whereas part three shifts the focus and rethinks the possibilities and limitations of transforming racialised and normative constraints. Taking up these particular problematics, this thesis as a whole argues that race trills itself: its identity/difference is simultaneously made possible and impossible.

Effects of Fabrication Processes on the Behavior of S960 Ultra High Strength Steel (UHSS)

Strenx® 960 MC is a direct quenched type of Ultra High Strength Steel (UHSS) with low carbon content. Although this material combines high strength and good ductility, it is highly sensitive towards fabrication processes. The presence of stress concentration due to structural discontinuity or notch will highlight the role of these fabrication effects on the deformation capacity of the material. Due to this, a series of tensile tests are done on both pure base material (BM) and when it has been subjected to Heat Input (HI) and Cold Forming (CF). The surface of the material was dressed by laser beam with a certain speed to study the effect of HI while the CF is done by bending the specimen to a certain angle prior to tensile test. The generated results illustrate the impact of these processes on the deformation capacity of the material, specially, when the material has HI experience due to welding or similar processes. In order to compare the results with those of numerical simulation, LS-DYNA explicit commercial package has been utilized. The generated results show an acceptable agreement between experimental and numerical simulation outcomes.

Time frames. Negotiating Cultural History

Time Frames brings together a group of cultural historians studying several different periods and locations in the history of Western culture, to discuss the temporal structures which historical studies live by. How do we construct chronologies and temporal sequences? How should we approach the discontinuity and particularity of the past, and its periodization? Deploying ideas and frames from three contemporary conceptual debates - spatial organisation, constructions of experience, and the cultural embeddedness of individual agency - the writers of this book propose methods of historicizing and explore what cultural history is about today.

Stochastic particle models: mean reversion and burgers dynamics. An application to commodity markets

The aim of this study is to propose a stochastic model for commodity markets linked with the Burgers equation from fluid dynamics. We construct a stochastic particles method for commodity markets, in which particles represent market participants. A discontinuity in the model is included through an interacting kernel equal to the Heaviside function and its link with the Burgers equation is given. The Burgers equation and the connection of this model with stochastic differential equations are also studied. Further, based on the law of large numbers, we prove the convergence, for large N, of a system of stochastic differential equations describing the evolution of the prices of N traders to a deterministic partial differential equation of Burgers type. Numerical experiments highlight the success of the new proposal in modeling some commodity markets, and this is confirmed by the ability of the model to reproduce price spikes when their effects occur in a sufficiently long period of time.