Puutavarakaupan jakelun nykytila ja kehittäminen pääkaupunkiseudulla

Työn tavoitteena oli kartoittaa kohdeyrityksen pääkaupunkiseudun puu- ja rakennustarvikekaupan jakelun nykytila ja kehittää toimipisteille uusi ja yhtenäinen jakelun toimintamalli. Ensin selvitettiin jakelun nykytila haastattelemalla kuljetuksista vastaavia henkilöitä. Kirjallisuudesta saadun tiedon avulla haettiin vaihtoehtoja uuden jakelumallin luomiselle. Yrityksen tietojärjestelmästä haettiin tietoa toteutuneista kuljetuskustannuksista ja -tapahtumista. Tutkimuksessa selvitettiin myös kuljetuskustannukset ja -tuotot. Tällä hetkellä yritys tekee jakelussa tappiota eli kuljetuskustannukset ovat asiakkailta perittyjä kuljetustuottoja suuremmat. Jokaisessa toimipisteessä kuljetukset hoidetaan itsenäisesti eikä yhteistä järjestelmää ole käytössä. Tästä aiheutuu päällekkäisiä ja turhia ajoja pääkaupunkiseudun alueella, mikä voitaisiin välttää yhteisellä toimintamallilla. Työssä luotiin erilaisia malleja ja niitä verrattiin nykytilanteeseen. Mallien paremmuuden arviointiin käytettiin kannattavuutta ja ulkoista tehokkuutta. Toimintavaihtoehdoiksi nousi kolme eri mallia. Vaihtoehtoina olivat toimipisteiden yhtenäinen malli, jossa ohjaus olisi joko omassa hallinnassa tai ulkoistettu, ja kolmantena vaihtoehtona olisi koko jakelun ulkoistaminen. Malleja varten kartoitettiin eri ohjelmistoja ja ulkoistuspalveluja tarjoavia yrityksiä, jotka olisivat yrityksen tarpeisiin soveltuvia. Toimenpide-ehdotuksina ja suosituksina esitetään yhteiseen jakelujärjestelmään siirtymistä sekä siirtymistä jakelun hinnoittelussa suoriteperusteiseen hinnoitteluun. Tulevaisuudessa jakelun tietoja tulisi kerätä ja tiedon karttuessa laatia suoriteperusteiset hinnoittelutaulukot kuljetuksille. Myös myyjille ja kuljetusvastaaville tarvitaan yhtenäiset toimintaohjeet tilausten muutoksista, kuljetusten hinnoittelusta ja toimituksista.

Monte Carlo Hypothesis Testing with The Sharpe Ratio

The purpose of this master thesis was to perform simulations that involve use of random number while testing hypotheses especially on two samples populations being compared weather by their means, variances or Sharpe ratios. Specifically, we simulated some well known distributions by Matlab and check out the accuracy of an hypothesis testing. Furthermore, we went deeper and check what could happen once the bootstrapping method as described by Effrons is applied on the simulated data. In addition to that, one well known RobustSharpe hypothesis testing stated in the paper of Ledoit and Wolf was applied to measure the statistical significance performance between two investment founds basing on testing weather there is a statistically significant difference between their Sharpe Ratios or not. We collected many literatures about our topic and perform by Matlab many simulated random numbers as possible to put out our purpose; As results we come out with a good understanding that testing are not always accurate; for instance while testing weather two normal distributed random vectors come from the same normal distribution. The Jacque-Berra test for normality showed that for the normal random vector r1 and r2, only 94,7% and 95,7% respectively are coming from normal distribution in contrast 5,3% and 4,3% failed to shown the truth already known; but when we introduce the bootstrapping methods by Effrons while estimating pvalues where the hypothesis decision is based, the accuracy of the test was 100% successful. From the above results the reports showed that bootstrapping methods while testing or estimating some statistics should always considered because at most cases the outcome are accurate and errors are minimized in the computation. Also the RobustSharpe test which is known to use one of the bootstrapping methods, studentised one, were applied first on different simulated data including distribution of many kind and different shape secondly, on real data, Hedge and Mutual funds. The test performed quite well to agree with the existence of statistical significance difference between their Sharpe ratios as described in the paper of Ledoit andWolf.

Power-line-communication-based data transmission concept for an LVDC electricity distribution network – Analysis and implementation

Communications play a key role in modern smart grids. New functionalities that make the grids ‘smart’ require the communication network to function properly. Data transmission between intelligent electric devices (IEDs) in the rectifier and the customer-end inverters (CEIs) used for power conversion is also required in the smart grid concept of the low-voltage direct current (LVDC) distribution network. Smart grid applications, such as smart metering, demand side management (DSM), and grid protection applied with communications are all installed in the LVDC system. Thus, besides remote connection to the databases of the grid operators, a local communication network in the LVDC network is needed. One solution applied to implement the communication medium in power distribution grids is power line communication (PLC). There are power cables in the distribution grids, and hence, they may be applied as a communication channel for the distribution-level data. This doctoral thesis proposes an IP-based high-frequency (HF) band PLC data transmission concept for the LVDC network. A general method to implement the Ethernet-based PLC concept between the public distribution rectifier and the customerend inverters in the LVDC grid is introduced. Low-voltage cables are studied as the communication channel in the frequency band of 100 kHz–30 MHz. The communication channel characteristics and the noise in the channel are described. All individual components in the channel are presented in detail, and a channel model, comprising models for each channel component is developed and verified by measurements. The channel noise is also studied by measurements. Theoretical signalto- noise ratio (SNR) and channel capacity analyses and practical data transmission tests are carried out to evaluate the applicability of the PLC concept against the requirements set by the smart grid applications in the LVDC system. The main results concerning the applicability of the PLC concept and its limitations are presented, and suggestion for future research proposed.

Quantile Estimation in Non-Stationary Streaming Data

We provide an incremental quantile estimator for Non-stationary Streaming Data. We propose a method for simultaneous estimation of multiple quantiles corresponding to the given probability levels from streaming data. Due to the limitations of the memory, it is not feasible to compute the quantiles by storing the data. So estimating the quantiles as the data pass by is the only possibility. This can be effective in network measurement. To provide the minimum of the mean-squared error of the estimation, we use parabolic approximation and for comparison we simulate the results for different number of runs and using both linear and parabolic approximations.

Applicability of Power-Line Communications to Data Transfer of On-line Condition Monitoring of Electrical Drives

The research of power-line communications has been concentrated on home automation, broadband indoor communications and broadband data transfer in a low voltage distribution network between home andtransformer station. There has not been carried out much research work that is focused on the high frequency characteristics of industrial low voltage distribution networks. The industrial low voltage distribution network may be utilised as a communication channel to data transfer required by the on-line condition monitoring of electric motors. The advantage of using power-line data transfer is that it does not require the installing of new cables. In the first part of this work, the characteristics of industrial low voltage distribution network components and the pilot distribution network are measured and modelled with respect topower-line communications frequencies up to 30 MHz. The distributed inductances, capacitances and attenuation of MCMK type low voltage power cables are measured in the frequency band 100 kHz - 30 MHz and an attenuation formula for the cables is formed based on the measurements. The input impedances of electric motors (15-250 kW) are measured using several signal couplings and measurement based input impedance model for electric motor with a slotted stator is formed. The model is designed for the frequency band 10 kHz - 30 MHz. Next, the effect of DC (direct current) voltage link inverter on power line data transfer is briefly analysed. Finally, a pilot distribution network is formed and signal attenuation in communication channels in the pilot environment is measured. The results are compared with the simulations that are carried out utilising the developed models and measured parameters for cables and motors. In the second part of this work, a narrowband power-line data transfer system is developed for the data transfer ofon-line condition monitoring of electric motors. It is developed using standardintegrated circuits. The system is tested in the pilot environment and the applicability of the system for the data transfer required by the on-line condition monitoring of electric motors is analysed.

Rikkiyhdisteiden laskenta simuloinneissa

Diplomityön tarkoituksena on tutkia eri laskentamenetelmien soveltuvuutta kevyiden rikkiyhdisteiden laskentaan ja kuinka mitatusta kaasu-neste tasapainotiedoista sovitetut binääriset vuorovaikutusparametrit parantavat kaasu-neste tasapainojen laskentaa simuloinneissa. Kirjallisuusosassa paneudutaan kevyisiin rikkiyhdisteisiin ja niiden aineominaisuuksiin. Lisäksi käsitellään öljynjalostuksessa nykyisin käytettäviä ja uusia kehitteillä olevia rikinpoistomenetelmiä.Kokeellisessa osassa tarkastellaan eri laskentamenetelmien soveltuvuutta rikkiyhdisteiden ja kevyiden hiilivetyjen kaasu-neste tasapainon laskentaan. Mitatusta rikkiyhdisteiden ja hiilivetyjen kaasu-neste tasapainoista sovitetaan binäärisiä vuorovaikutusparametrejä tarkentamaan käytettäviä laskentamenetelmiä. Osassa verrataan binääristen seosten mittaustuloksia eri laskentamenetelmillä saatuihin simulointituloksiin. Tarkasteluiden perusteella tehdään johtopäätöksiä laskentamenetelmien soveltuvuudesta kevyiden hiilivetyjen ja rikkiyhdisteiden laskentaan. Tarkastellaan kahden prosessin (rikkivetystripperi ja butaaninpoistokolonni) rikkiyhdisteiden laskentaa. Prosesseille tehdään taseajot, joista saatuja analyysituloksia verrataan simulointien antamiin tuloksiin. Työssä tarkastellaan myös veden liukoisuuden laskentaa ja mahdollisten laskentamenetelmien käytön vaikutusta rikkiyhdisteiden laskentaan.

Mittausvirtoihin liittyvä standardointi- ja kooditusehdotus uusilla energiamarkkinoilla

Sähkömarkkinaosapuolet ovat havainneet lukuisia puutteita ja haasteita tietojärjestelmien tiedonvaihtoon liittyvissä kysymyksissä. Tässä työssä käsitellään tiedonvaihdon ongelmaa mittausvirtojen kannalta. Tiedonvaihdon lisääntyminen ja sanomien monipuolistuminen on johtanut siihen, että läheskään kaikki tarpeelliset sanomat eivät ole standardoitu, ja jo luoduissa tai ehdotetuissa standardeissa on huomattavia eroavaisuuksia mm. eri maiden välillä. Tässä työssä kuvataan nykyinen automaattisen mittarinlukujärjestelmän ja jakeluverkkoyhtiön mittaustietovaraston välinen tiedonvaihtoratkaisu ja siihen liittyvät mittaustietovirrat. Työssä esitellään myös älykkäiden mittarien tuomia hyötyjä ja pohditaan uusien mittausten tuomia mahdollisuuksia. Lisäksi pohditaan nykyisten tietovirtojen koodituskäytäntöjen toimivuutta ja niiden puutteita ja ongelmia. Työssä laaditaan esimerkki standardi mittausvirtakonfiguraation mallintamiseksi sähkömarkkinoilla. Työn painopiste on energiamittaustietojen tietovirroissa lähtien laskutuksen tarpeista. Tavoitteena on automaattisten mittarinhallintaprojektien tuomien älykkäiden mittarien uusien mittausten aiheuttaman ja mahdollistaman tietovirran standardointi. Työssä pohditaan, kuinka tietovirta saadaan eheästi siirtymään mittauspalveluntarjoajan ja jakeluverkkoyhtiön järjestelmien välillä sekä miten uudet tiedonkäyttötarpeet tulisi koodittaa. Uudet sanomastandardiehdotukset esitetään XML-mallein, ja lopuksi pohditaan mallien toimivuutta ja niihin tarvittavia jatkokehitystarpeita.

Cost Optimisation of Mobile Advertising Client Data Transfer

Data traffic caused by mobile advertising client software when it is communicating with the network server can be a pain point for many application developers who are considering advertising-funded application distribution, since the cost of the data transfer might scare their users away from using the applications. For the thesis project, a simulation environment was built to mimic the real client-server solution for measuring the data transfer over varying types of connections with different usage scenarios. For optimising data transfer, a few general-purpose compressors and XML-specific compressors were tried for compressing the XML data, and a few protocol optimisations were implemented. For optimising the cost, cache usage was improved and pre-loading was enhanced to use free connections to load the data. The data traffic structure and the various optimisations were analysed, and it was found that the cache usage and pre-loading should be enhanced and that the protocol should be changed, with report aggregation and compression using WBXML or gzip.

Electric field distribution in silicon edgeless detector

This Master’s Thesis work reports about electric field distribution in recently developed silicon edgeless detector with a new current terminating structure. This structure enables the essential reduction of insensitive detector area as well as allows separation of the current flowing through the active area from the current flowing at the cut edge. The reliable operation of this detector is strongly needed due to the installation inside LHC. In accordance with formulated problems SEM was used as an investigation tool for collecting the data about electric field distribution.

The Effect of Operational Disturbances on Reliability and Operation Time Distribution of NCmachine Tools in FMS

This thesis concentrates on studying the operational disturbance behavior of machine tools integrated into FMS. Operational disturbances are short term failures of machine tools which are especially disruptive to unattended or unmanned operation of FMS. The main objective was to examine the effect of operational disturbances on reliability and operation time distribution for machine tools. The theoretical part of the thesis covers the fimdamentals of FMS relating to the subject of this study. The concept of FMS, its benefits and operator's role in FMS operation are reviewed. The importance of reliability is presented. The terms describing the operation time of machine tools are formed by adopting standards and references. The concept of failure and indicators describing reliability and operational performance for machine tools in FMSs are presented. The empirical part of the thesis describes the research methodology which is a combination of automated (ADC) and manual data collection. By using this methodology it is possible to have a complete view of the operation time distribution for studied machine tools. Data collection was carried out in four FMSs consisting of a total of 17 machine tools. Each FMS's basic features and the signals of ADC are described. The indicators describing the reliability and operation time distribution of machine tools were calculated according to collected data. The results showed that operational disturbances have a significant influence on machine tool reliability and operational performance. On average, an operational disturbance occurs every 8,6 hours of operation time and has a down time of 0,53 hours. Operational disturbances cause a 9,4% loss in operation time which is twice the amount of losses caused by technical failures (4,3%). Operational disturbances have a decreasing influence on the utilization rate. A poor operational disturbance behavior decreases the utilization rate. It was found that the features of a part family to be machined and the method technology related to it are defining the operational disturbance behavior of the machine tool. Main causes for operational disturbances were related to material quality variations, tool maintenance, NC program errors, ATC and machine tool control. Operator's role was emphasized. It was found that failure recording activity of the operators correlates with the utilization rate. The more precisely the operators record the failure, the higher is the utilization rate. Also the FMS organizations which record failures more precisely have fewer operational disturbances.

Multichannel distribution strategy for electrical equipment marketing

The thesis examines System Integration and original equipment manufacturer (OEM) channel in the St. Petersburg drives market. The aim of the study was to increase understanding the relationship between OEM and SI and producers, problems and ongoing trends. The collected data was analyzed in order to find out which features of a power electronic drive product exercise a significant influence for the Russian companies decision. An essential part of this study was interviews as primary information sources, organized with SI and OEM companies which represented the basic SPb industry segments. The wholesalers and end users are left out from the analysis. The collected data was analyzed in order to find out which features of a power electronic drive product exercise a significant influence for the Russian companies decision.

Strategic Development of Electricity Distribution Networks – Concept and Methods

Strategic development of distribution networks plays a key role in the asset management in electricity distribution companies. Owing to the capital-intensive nature of the field and longspan operations of companies, the significance of a strategy is emphasised. A well-devised strategy combines awareness of challenges posed by the operating environment and the future targets of the distribution company. Economic regulation, ageing infrastructure, scarcity of resources and tightening supply requirements with challenges created by the climate change put a pressure on the strategy work. On the other hand, technology development related to network automation and underground cabling assists in answering these challenges. This dissertation aims at developing process knowledge and establishing a methodological framework by which key issues related to network development can be addressed. Moreover, the work develops tools by which the effects of changes in the operating environment on the distribution business can be analysed in the strategy work. To this end, the work discusses certain characteristics of the distribution business and describes the strategy process at a principle level. Further, the work defines the subtasks in the strategy process and presents the key elements in the strategy work and long-term network planning. The work delineates the factors having either a direct or indirect effect on strategic planning and development needs in the networks; in particular, outage costs constitute an important part of the economic regulation of the distribution business, reliability being thus a key driver in network planning. The dissertation describes the methodology and tools applied to cost and reliability analyses in the strategy work. The work focuses on determination of the techno-economic feasibility of different network development technologies; these feasibility surveys are linked to the economic regulation model of the distribution business, in particular from the viewpoint of reliability of electricity supply and allowed return. The work introduces the asset management system developed for research purposes and to support the strategy work, the calculation elements of the system and initial data used in the network analysis. The key elements of this asset management system are utilised in the dissertation. Finally, the study addresses the stages of strategic decision-making and compilation of investment strategies. Further, the work illustrates implementation of strategic planning in an actual distribution company environment.