Effect of Noncondensable Gases on Circulation of Primary Coolant in Nuclear Power Plants in Abnormal Situations

The present study focuses on two effects of the presence of a noncondensable gas on the thermal-hydraulic behavior of thecoolant of the primary circuit of a nuclear reactor in the VVER-440 geometry inabnormal situations. First, steam condensation with the presence of air was studied in the horizontal tubes of the steam generator (SG) of the PACTEL test facility. The French thermal-hydraulic CATHARE code was used to study the heat transfer between the primary and secondary side in conditions derived from preliminary experiments performed by VTT using PACTEL. In natural circulation and single-phase vapor conditions, the injection of a volume of air, equivalent to the totalvolume of the primary side of the SG at the entrance of the hot collector, did not stop the heat transfer from the primary to the secondary side. The calculated results indicate that air is located in the second half-length (from the mid-length of the tubes to the cold collector) in all the tubes of the steam generator The hot collector remained full of steam during the transient. Secondly, the potential release of the nitrogen gas dissolved in the water of the accumulators of the emergency core coolant system of the Loviisa nuclear power plant (NPP) was investigated. The author implemented a model of the dissolution and release ofnitrogen gas in the CATHARE code; the model created by the CATHARE developers. In collaboration with VTT, an analytical experiment was performed with some components of PACTEL to determine, in particular, the value of the release time constant of the nitrogen gas in the depressurization conditions representative of the small and intermediate break transients postulated for the Loviisa NPP. Such transients, with simplified operating procedures, were calculated using the modified CATHARE code for various values of the release time constant used in the dissolution and release model. For the small breaks, nitrogen gas is trapped in thecollectors of the SGs in rather large proportions. There, the levels oscillate until the actuation of the low-pressure injection pumps (LPIS) that refill the primary circuit. In the case of the intermediate breaks, most of the nitrogen gas is expelled at the break and almost no nitrogen gas is trapped in the SGs. In comparison with the cases calculated without taking into account the release of nitrogen gas, the start of the LPIS is delayed by between 1 and 1.75 h. Applicability of the obtained results to the real safety conditions must take into accountthe real operating procedures used in the nuclear power plant.

A Large-Sized Multiwire Proportional Counter for Radiological Survey of Large Areas and Surfaces

Työn tavoitteena oli selvittää, miten eri parametrit vaikuttavat monilankaisen verrannollisuuslaskurin laskennallisiin ominaisuuksiin sekä voidaanko suurikokoista monilankaverrannollisuuslaskuria käyttää tehokkaasti suurien pintojen ? - ja ?- kontaminaation mittaamiseen. Ensin selvitettiin EU:n nykyistä clearing-käytäntöä sekä hahmoteltiin tulevia materiaalivirtoja, esiteltiin verrannollisuuslaskurin ja sen monilankamallin toimintaperiaate sekä käytettävien materiaalien ominaisuudet. Kootun teorian pohjalta selvitettiin tärkeimpien parametrien vaikutus ilmaisimen laskennallisiin ominaisuuksiin. Lopuksi suoritettiin rakenteilla olevan monilankaverrannollisuuslaskurin alustava testaus. Tulevien vuosien aikana eri puolilla maailmaa suljettavat erityyppiset ydinlaitokset luovat suuren tarpeen tehokkaiden kontaminaatiomittauslaitteistojen kehittämiselle. Tällä hetkellä mittaukset suoritetaan lähinnä noin 1 dm2 käsi-instrumentein, joten suurikokoinen, automatisoitu mittauslaitteisto sekä tehostaisi mittausprosessia suuresti sekä säästäisi runsaasti miestyötunteja. Jatkotoimenpiteiksi ehdotetaan laitteiston jatkotestausta, liikkeen ja nopeuden testausta sekä lopulta paikkaherkkyystoiminnon toteuttamisperiaatteen valintaa ja testausta.

Implementation of counter testing in Nokia Automation System

In this study the performance measurement, a part of the research and development of the RNC, was improved by implementing counter testing to the Nokia Automation System. The automation of counter testing is a feature the customer ordered, because performing counter testing manually is rather complex. The objective was to implement an automated counter testing system, which once configured correctly, would manage to run the testing and perform the analysis. The requirements for the counter testing were first studied. It was investigated if the auto-mation of the feature was feasible in the meetings with the customer. The basic functionality required for the automation was also drawn. The technologies used in the architecture of the Nokia Automation System were studied. Based on the results of the study, a new technology, wxWidgets, was introduced. The new technology was necessary to facilitate the implementing of the required feature. Finally the implementation of the counter testing was defined and implemented. The result of this study was the automation of the counter testing method developed as a new feature for the Nokia Automation System. The feature meets the specifications and requirements set by the customer. The performing of the counter testing feature is totally automated. Only configuration of the test cases is done by the user. The customer has presented new requests to further develop the feature and there are plans by the Nokia Automation System developers to implement those in the near future. The study describes the implementation of the counter testing feature introduced. The results of the study give guidelines for further developing the feature.

Counter-current Washing of Filter Cakes

The main objective of this thesis was to compare the efficiency of counter-current and co-current filter cake washing techniques. Filter cake washing is a common unit operation which is used in the chemical process industry for improving the recovery of the liquid phase or for purifying the solid phase of the filter cake. Counter-current displacement washing is more difficult to arrange and it requires additional process equipment but the advantage of counter-current method is that the consumption of wash water that is required for achieving certain filter cake purity may be considerably decreased when compared to the co-current washing method. This is true especially for materials that are difficult to wash. The literature part of this thesis consists of a review of filter cake washing in general, including the basic principles of co-current and counter-current techniques, and a description of the structure and operation of a horizontal vacuum belt filter, which is the equipment considered in the experimental part of this thesis. Also the most common cake washing models are introduced. The experiments were performed by washing wheat apatite filter cakes in a laboratory scale vacuum filter by using both co-current and counter-current washing methods. The main results of these tests were the washing curves that relate the purity of the filter cake to the amount of wash liquid used. Comparison between the obtained washing curves showed that both washing methods could be efficiently applied for achieving good washing results. The differences between the wash liquid consumptions in the co-current and counter-current washing methods were found to be surprisingly small but this is most probably explained by the relatively good washing characteristics of the apatite cakes. The washing models introduced in the literature part were compared with the results obtained from the experiments and it was found out that the studied cake washing processes could be described

Defending behavior in bullying situations

In order to encourage children and adolescents to defend and support their victimized peers, it is important to identify factors that either maximize or minimize the probability that students will engage in such behaviors. This thesis is composed of four studies designed to elucidate how a variety of factors work in conjunction to explain why some children defend their victimized classmates, whereas others remain passive or reinforce the bully. The conceptual framework of this thesis is drawn from several theoretical considerations, including social cognitive learning theory, the expectancy-value framework as well as the literature emphasizing the importance of empathy in motivating behaviors. Also the child-by-environment perspective and the socialecological perspective influenced this research. Accordingly, several intra- and interpersonal characteristics (e.g., social cognitions, empathy, and social status) as well as group-level factors (e.g., norms) that may either enhance or reduce the probability that students defend their victimized peers are investigated. In Studies I and II, the focus is on social cognitions, and special attention is paid to take into account the domain-specificity of cognition-behavior processes. Self-efficacy for defending is still an interest of study III, but the role of affective empathy on defending is also investigated. Also social status variables (preference and perceived popularity) are evaluated as possible moderators of links between intrapersonal factors and defending. In Study IV, the focus is expanded further by concentrating on characteristics of children’s proximal environments (i.e., classroom). Bullying norms and collective perceptions (i.e., connectedness among the students and the teachers’ ability to deal with bullying situations) are examined. Data are drawn from two research projects: the Kaarina Cohort Study (consisting of fourth and eighth graders) and the randomized controlled trial (RCT) evaluating the effects of the KiVa antibullying program (consisting of third to fifth graders). The results of the thesis suggest that defending the victims of bullying is influenced by a variety of individual level motivational characteristics, such as social cognitions and affective empathy. Also, both perceived popularity and social preference play a role in defending, and the findings support the conceptualization that behavior results from the interplay between the characteristics of an individual child and their social-relational environment. Classroom context further influences students’ defending behavior. Thus, antibullying efforts targeting peer bystanders should aim to influence intra- and interpersonal characteristics of children and adolescents as well as their social environment.

Creative brand launch in phamaceutical over-the-counter markets – case Burana

The purpose of this study is to examine how a launch of a pharmaceutical over-the-counter sold (OTC) brand can be done by using creative solutions and thus affecting the product life cycle. The study is inspired by a phenomenon called Burana. The Burana brand has been a market leader of OTC painkillers in Finland for the past 27 years. The aim of this study is to “solve the mystery” behind Burana brand’s success by focusing on the launch phase of Burana as an OTC medicine. Farmos Group Ltd (the owner of the brand in 1980´s) had not originally invented the product in question – ibuprofen – and the product had already reached it´s maturity phase, if not even decline from the product life cycle aspect when this phenomenon takes place. This has made the marketing choices, the product launch phase as well as the product management even more interesting from the company point of view as well as from a learning point of view. The methodology in this study is qualitative with a descriptive research strategy, while the study is conducted as a longitudinal single-case study. The methods used in this study have been collecting, analyzing and interpreting the data, which is based on the interviewees’ comments and observed behavior. According to the study, the successful launch phase helped in setting the product one step ahead of the competitors and thus aided the brand leadership and prolonged the product life cycle. Another notable aspect that became clear from the interviews and the documentary of Burana´s launch phase was the innovative idea of involving the people of the distribution chain into the product launch through education. As this study has pointed out, it is not enough to for a company to build an innovative team of employees, but also to offer them an involved and encouraging management. According to the interviews, the support from the company management gave the marketing team the encouragement to be innovative. It can be thus stated that the management of a company has an essential role in fostering the creativity within the company.

Situations charta öfver Orrjärvi grufva med kringliggande koppar- och järnmalms skärpningar, uti Kisko sokn, Raseborgs wästra härad och Nylands län

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Continuous Counter-current Solvent Extraction of Magnesium and Calcium from Lithium-rich Brine

Solvent extraction of calcium and magnesium impurities from a lithium-rich brine (Ca ~ 2,000 ppm, Mg ~ 50 ppm, Li ~ 30,000 ppm) was investigated using a continuous counter-current solvent extraction mixer-settler set-up. The literature review includes a general review about resources, demands and production methods of Li followed by basics of solvent extraction. Experimental section includes batch experiments for investigation of pH isotherms of three extractants; D2EHPA, Versatic 10 and LIX 984 with concentrations of 0.52, 0.53 and 0.50 M in kerosene respectively. Based on pH isotherms LIX 984 showed no affinity for solvent extraction of Mg and Ca at pH ≤ 8 while D2EHPA and Versatic 10 were effective in extraction of Ca and Mg. Based on constructed pH isotherms, loading isotherms of D2EHPA (at pH 3.5 and 3.9) and Versatic 10 (at pH 7 and 8) were further investigated. Furthermore based on McCabe-Thiele method, two extraction stages and one stripping stage (using HCl acid with concentration of 2 M for Versatic 10 and 3 M for D2EHPA) was practiced in continuous runs. Merits of Versatic 10 in comparison to D2EHPA are higher selectivity for Ca and Mg, faster phase disengagement, no detrimental change in viscosity due to shear amount of metal extraction and lower acidity in stripping. On the other hand D2EHPA has less aqueous solubility and is capable of removing Mg and Ca simultaneously even at higher Ca loading (A/O in continuous runs > 1). In general, shorter residence time (~ 2 min), lower temperature (~23 °C), lower pH values (6.5-7.0 for Versatic 10 and 3.5-3.7 for D2EHPA) and a moderately low A/O value (< 1:1) would cause removal of 100% of Ca and nearly 100% of Mg while keeping Li loss less than 4%, much lower than the conventional precipitation in which 20% of Li is lost.

Situations charta öfver belägenheten af Kuusamo socken

Kartan esitystekniikka: maastokartta.

The Influence of Informational and Emotional Advertising Appeals on Advertising Effectiveness – Consumers’ Perspective on the Over-the-Counter Product Advertisements in Finland

Consumers face enormous amounts of promotional messages daily whereas the pharmaceutical companies among other industries spend considerable time and money developing effective advertising strategies. There are multiple possible ways to appeal the target customer in order to increase the effectiveness of the advertisement. In spite of the various possibilities to categorize persuasive communication, the informational and the emotional appeals are the typical approaches. This study assesses the influence of the informational and emotional advertising appeals on the advertising effectiveness in the context of OTCs in Finland. The research method applied in this study is a quantitative survey. The data consists of 461 responses from the target population of 18–80 years old Finnish speaking consumers. The results from the marketing research indicate that the positive correlations of the emotional appeals are much stronger than the positive correlations of the informational appeals relating to the advertising effectiveness. However, on average the Finnish consumers experience the OTC advertisements relying on the informational appeals more effective than the OTC advertisements relying on the emotional appeals. Furthermore, within emotional appeals there is a much greater variety in the experienced advertising effectiveness not providing as stabile and consistent experienced advertising effectiveness compared to the informational appeals. Thus, the OTC advertisement relying more on the emotional appeals are much more risky in terms of advertising effectiveness. There are also differences with the experienced advertising effectiveness between the Finnish consumer groups and the information can be utilised when designing tailored OTC advertisements. The Finnish men consider humorous advertisements more effective than the Finnish women. In addition, the people living outside Uusimaa Region experience higher advertising effectiveness with the advertisements relying more on the informational advertisements compared to the people living in Uusimaa Region. In similar vein, the people with lower education experience higher advertising effectiveness with the advertisements relying more on the informational advertisements compared to the people with high education. Additionally, the older generation perceive an OTC advertisement with a middle-aged celebrity more effective than the younger consumers