Embedded Monitoring Server

This study investigates, designs, and implements an inexpensive application that allows local and remote monitoring of a home. The application consists of an array of sensors for monitoring different conditions in a home environment and also for accessing the devices that might be connected to the system. Only a few sensors are initially involved in this study and information about the temperature level, forced entry detection, smoke and water leakage detection can be obtained at any time from any location with an Internet connection. The application software (coded in C language) runs on an embedded system which is basically a wireless Linksys router running on a GNU/Linux based firmware for embedded systems. Interaction between the sensors and the application software is achieved through an implemented sensor interfacing circuit. The communication with the sensor interfacing unit is done through the serial port, and accessibility of the connected sensors is achieved through a telnet client. The sensors can be accessed from local and remote locations with the sensors giving reliable information. The resulting application shows that it is possible to use the router for other applications other than what it is intended for.

Secure IP-based Connection Solutions for Mobile Users

Tämä diplomityö tutkii turvallisia etäyhteystapoja yritysverkkoihin. Samanaikasesti kuin Internettiin liitetyt langattomat verkot, kuten langattomat lähiverkot ja pakettikytkentäiset matkapuhelinverkot, tulevat yhä yleisemmiksi, mahdollisuus etäyhteksien luomiseen näiden verkkojen kautta tulee yhä suositummaksi. Vaikka tietoverkot kehittyvät, pysyvät niitä uhkaavat yleisluontoiset uhat samoina. IP pohjaiset VPN-verkot ovat sopiva tapa suojata Internetin ylitse tapahtuvia etäyhteksiä. Eri VPN-ratkaisuja on kuitenkin tarjolla laaja valikoima. Oikean tyyppisen VPN-ratkaisun valinta on kriittistä, jotta yrityksen etäyhteystarpeet saadaan täytettyä. Diplomityö esittelee eräänä vaihtoehtona miten Pocket PC 2002 PDA laitetta ja Windows XP Professional käyttöjärjestelmää voidaan käyttää edullisen VPN ratkaisun toteuttamiseen.

Testing and Monitoring Mill Connection Messages

Tarve tälle työlle on noussut sanomapalvelinsoveluksissa (servers) esiintyvistä ongelmista. Sanomapalvelinsovelluksia käytetään lähettämään ja vastaanottamaan sanomia paperiteollisuuden myynnin ja jakelun järjestelmässä maantieteellisesti erillään olevista paperiteollisuuden tehtaista. Sanomapalvelinsovelusten kunnollinen toimivuus on tärkeää koko järjestelmän toimivuuden kannalta, koska nämä palvelimet käsittelevät päivittäin tuhansia sanomia, jotka sisältävät merkityksellistä järjestelmätietoa. Tässä työssä on tutkittu mahdollisia toteutustekniikoita ja näihin tutkimuksiin pohjautuen toteutettu työkalut sanomapalvelinsovellusten testaukseen ja valvontaan. Sovellus-arkkituuritekniikoita tutkittaessa tutkimus rajattiin 3-tasoarkkitehtuuritekniikkaan, erityisesti TUXEDOTM -järjestelmätekniikkaan, koska toteutettavaa sovellusta käytetään hajautetussa sovellusympäristössä. Sovellusasiakkaan (client) toteutusta varten tutkittiin ja vertailtiin XML-tekniikkaa ja Microsoft Visual C++ -tekniikkaa käytettynä Tieto-Enatorin Phobos Interaktiivisen C++ -luokkakirjaston kanssa. XML-tekniikoita sekä Visual C++ ja Phobos-luokkakirjasto –tekniikkaa tutkittiin niiltä osin, mitä tarvittiin sanomamerkkijonojen katseluun. XML-tietokantatekniikoita tutkittiin mahdollisena vaihtoehtona tietokanta ja sovelluspalvelintekniikalle. Työn ensimmäisenä tavoitteena oli toteuttaa työkalu sanomapalvelinsovellusten testaamiseen. Toisena tavoitteena oli toteuttaa työkalu sanomien sisällön oikeellisuuden valvontaan. Kolmantena tavoitteena oli analysoida olemassaolevaa sanomavirheiden valvontasovellusta ja kehittää sitä eteenpäin. Diplomityön tuloksena toteutettiin sovellus sanomapalvelinsovellusten testaamiseen ja valvontaan. Tutkituista asiakassovelustekniikoista valittiin toteutus-tekniikaksi MS Visual C++ käytettynä Phobos Interaktiivisen C++ luokkakirjaston kanssa tekniikan tunnettavuuden vuoksi. 3-taso TUXEDOTM-tekniikka valittiin sovelluksen arkkitehtuuriksi. Lisäksi löydettiin parannuksia olemassa oleviin sanoma-virheiden valvontatoimintoihin. Tutkitut toteutustekniikat ovat yleisiä ja niitä voidaan käyttää, kun toteutetaan samanlaisia sovelluksia samanlaisiin sovellusympäristöihin.

New design of the frame for a permanent magnet generator

This thesis introduces a search for a new design of the frame for a permanent magnet generator mounted at a windmill. The objective of this work is to offer new design ideas for the stator frame - new concepts for connecting stator core to stator frame in a generator. Desired aims of new design concepts are: simplification of the structure production; decrease of material use; use of standard components; light weight of construction and etc. Thesis contains several new possible designs for the stator frame structure. Also, it has a list of possible connection concepts, which can be used to join the stator to the frame. All new ideas are described and compared according to its match to the desired purposes of the work. New design concepts are modeled using modern software. The main part of the Thesis contains several approximate computer models of the current and new offered constructions, description of loads and stress in the current stator frame. It has evaluation of the most important stress and load characteristics. The final design is a result of all previous research. It has a description of a new frame structure and joining concept for it. This structure matched main aims of work, but it does not have detailed design with dimensions and check calculations of the frame and welds. Thesis gives representation about design search, evaluation and comparison of new concepts of generator structure. Also, it gives general representation of renewable energy technology, knowledge about windmill turbines and its contents.

Distributed ControlArchitecture of Power Electronics Building-Block-Based Frequency Converters

The increasing power demand and emerging applications drive the design of electrical power converters into modularization. Despite the wide use of modularized power stage structures, the control schemes that are used are often traditional, in other words, centralized. The flexibility and re-usability of these controllers are typically poor. With a dedicated distributed control scheme, the flexibility and re-usability of the system parts, building blocks, can be increased. Only a few distributed control schemes have been introduced for this purpose, but their breakthrough has not yet taken place. A demand for the further development offlexible control schemes for building-block-based applications clearly exists. The control topology, communication, synchronization, and functionality allocationaspects of building-block-based converters are studied in this doctoral thesis. A distributed control scheme that can be easily adapted to building-block-based power converter designs is developed. The example applications are a parallel and series connection of building blocks. The building block that is used in the implementations of both the applications is a commercial off-the-shelf two-level three-phase frequency converter with a custom-designed controller card. The major challenge with the parallel connection of power stages is the synchronization of the building blocks. The effect of synchronization accuracy on the system performance is studied. The functionality allocation and control scheme design are challenging in the seriesconnected multilevel converters, mainly because of the large number of modules. Various multilevel modulation schemes are analyzed with respect to the implementation, and this information is used to develop a flexible control scheme for modular multilevel inverters.

Improving alumni administration by self-built information system : building IMMIT connected' to enhance alumni connection

Alumni are considered as precious resource of the institutions, thus improving alumni adminis-tration is critical. In information era, alumni administration is assisted by widespread information technology, such as social network sites. This paper aims to discover if a self-built information sys-tem would enhance alumni connection in the IMMIT context, and what kind of attributes would be helpful applying to the special context. The current online alumni services at other universities and at the IMMIT host university are analyzed, and then social media is introduced. After illustrating the social capital existing in IM-MIT, the type of the self-built information system is suggested, following an interpretation of the prototype. Two research models are utilized in this article: TAM and intentional social action model. The second model is adjusted with proposed parameters. Afterwards, a survey and an interview protocol are designed under the guidance of the models. The results are analyzed in several groups, and the proposed parameters are tested. A conclusion is drawn to indicate how to improve alumni‟s intention to use and how to achieve a better-accepted design.

Research framework for the connection between environmental collaboration and firm performance

This thesis focuses on collaborative activities with regard to environmental issues both within the firm and outside the firm with the key suppliers and customers, i.e. internal and external environmental collaboration. Integrating environmental thinking into supply chain management has received increasing interest in recent years. The relational view and the natural resource-based-view together suggest that environmental capabilities can be built jointly with supply chain partners and used to gain sustained competitive advantage. Several studies have been undertaken to analyse the connection between environmental activities and firm performance but most studies have taken only economic performance into account. This study pays attention also to two other dimensions of firm performance, intra-firm supply chain performance and environmental performance, and aims at presenting the linkages between them and environmental collaboration. This thesis creates a research framework for the connections between environmental collaboration and firm performance and suggests approaches to analyse these. In order to find out the key concepts and their relationship, an extensive literature review is conducted. The research framework proposes a positive connection between internal and external environmental collaboration and all three dimensions of firm performance. In addition, environmental performance and intra-firm supply chain performance are expected to contribute positively to economic performance. Hence, firms are suggested to benefit from environmental collaboration both within the firm and outside the firm. Empirical testing of the developed research framework is out of the scope of this study. However, this thesis proposes using a mixed methods research approach, including survey research and multiple case studies. Finland State of Logistics 2012 survey commissioned by the Finnish Ministry of Transport and Communications and conducted by Turku School of Economics is used as an example of data for the quantitative phase. The applicability of these two methods is discussed at a general level and with regard to analysing the research framework developed in the thesis. Future research will aim at the development of the research framework and the methods in order to confirm the connection between environmental collaboration and firm performance.

Consistency of UML based designs using ontology reasoners

Software plays an important role in our society and economy. Software development is an intricate process, and it comprises many different tasks: gathering requirements, designing new solutions that fulfill these requirements, as well as implementing these designs using a programming language into a working system. As a consequence, the development of high quality software is a core problem in software engineering. This thesis focuses on the validation of software designs. The issue of the analysis of designs is of great importance, since errors originating from designs may appear in the final system. It is considered economical to rectify the problems as early in the software development process as possible. Practitioners often create and visualize designs using modeling languages, one of the more popular being the Uni ed Modeling Language (UML). The analysis of the designs can be done manually, but in case of large systems, the need of mechanisms that automatically analyze these designs arises. In this thesis, we propose an automatic approach to analyze UML based designs using logic reasoners. This approach firstly proposes the translations of the UML based designs into a language understandable by reasoners in the form of logic facts, and secondly shows how to use the logic reasoners to infer the logical consequences of these logic facts. We have implemented the proposed translations in the form of a tool that can be used with any standard compliant UML modeling tool. Moreover, we authenticate the proposed approach by automatically validating hundreds of UML based designs that consist of thousands of model elements available in an online model repository. The proposed approach is limited in scope, but is fully automatic and does not require any expertise of logic languages from the user. We exemplify the proposed approach with two applications, which include the validation of domain specific languages and the validation of web service interfaces.

Coercion, Perceived Care and Quality of Life Among Patients in Psychiatric Hospitals

The goals of the study were to describe patients’ perceptions of care after experiencing seclusion/restraint and their quality of life. The goal was moreover to identify methodological challenges related to studies from the perspective of coerced patients. The study was conducted in three phases between September 2008 and April 2012. In the first phase, the instrument Secluded/ Restrained Patients’ Perception of their Treatment (SR-PPT) was developed and validated in Japan in cooperation with a Finnish research group (n = 56). Additional data were collected over one year from secluded/restrained patients using the instrument (n = 90). In the second phase, data were collected during the discharge process (n = 264). In the third phase, data were collected from electronic databases. Methodological and ethical issues were reviewed (n = 32) using systematic review method. Patients perceived that co-operation with the staff was poor; patients’ opinions were not taken into account, treatment targets collated and treatment methods were seen in different ways. Patients also felt that their concerns were not well enough understood. However, patients received getting nurses’ time. In particular, seclusion/restraint was considered unnecessary. The patients felt that they benefited from the isolation in treating their problems more than they needed it, even if the benefit was seen to be minor. Patients treated on forensic wards rated their treatment and care significantly lower than in general units. During hospitalization secluded/restrained patients evaluated their quality of life, however, better than did non-secluded/restrained patients. However, no conclusion is drawn to the effect that the better quality of life assessment is attributable to the seclusion/restraint because patients’ treatment period after the isolation was long and because of many other factors, as rehabilitation, medication, diagnostic differences, and adaptation. According to the systematic mixed studies review variation between study designs was found to be a methodological challenge. This makes comparison of the results more difficult. A research ethical weakness is conceded as regards descriptions of the ethical review process (44 %) and informed consent (32 %). It can be concluded that patients in psychiatric hospital care and having a voice as an equal expert require special attention to clinical nursing, decision-making and service planning. Patients and their family members will be consulted in plans of preventive and alternative methods for seclusion and restraint. The study supports the theory that in ethical decision-making situations account should be taken of medical indications, in addition to the patients’ preferences, the effect of treatment on quality of life, and this depends on other factors. The connection between treatment decisions and a patient’s quality of life should be evaluated more structurally in practice. Changing treatment culture towards patients’ involvement will support daily life in nursing and service planning taking into account improvements in patients’ quality of life.

Women or Girls in Reality Television? Translating References to Females in the Reality Dating Show Love Connection

Tässä sivuaineen tutkielmassa tarkastellaan, miten naisiin viittaavat sanat on käännetty suomalaisen, mutta pääosin englanniksi puhutun Love Connection -tosi-tvohjelman suomenkielisissä tekstityksissä. Tavoitteena on selvittää, millä tavoin suomen ja englannin puhekielen erot naispuolisiin henkilöihin viitattaessa näkyvät ruututeksteissä, ja millaisia käännösstrategioita ohjelman kääntäjä on sarjaa suomentaessaan käyttänyt. Lisäksi tv-ohjelmassa tehtyjä naisiin kohdistuvia viittauksia verrataan ohjelman englanninkielisessä mainoslehtisessä käytettyihin naisiin viittaaviin sanoihin. Tutkimuksen primäärimateriaali koostui Love Connection -tv-sarjan 12 osasta sekä niiden suomenkielisestä tekstityksestä, ohjelman Yhdysvaltoihin suunnatusta mainoslehtisestä sopivien osallistujien löytämiseksi sekä sarjan kääntäjän haastattelusta. Tutkimus toteutettiin sekä kvalitatiivisin että kvantitatiivisin menetelmin. Tv-ohjelman jaksoista litteroitiin englanninkielinen puhe ja suomenkielinen tekstitys niiltä osin kuin vähintään toisessa esiintyi viittaus naispuoliseen henkilöön, kuten woman/nainen tai girl/tyttö. Aineistosta poimitut viittaukset sijoitettiin lähdekirjallisuuden pohjalta luotuihin kategorioihin sen mukaan, millaista käännösstrategiaa niihin oli sovellettu. Lisäksi tarkasteltiin, millaisia eroja sovelletuissa käännösstrategioissa ilmeni ohjelman osallistujien tekemien viittausten välillä sekä toisaalta yksilöhaastattelujen ja keskustelutilanteiden välillä. Analyysi ja kääntäjän haastattelu osoittivat, että suurin osa viittauksista käännettiin suomeksi lähimmällä semanttisella vastineella, mutta myös poistoja ja korvauksia esimerkiksi pronominilla oli tekstityksen vaatimien tila- ja aikarajoitusten vuoksi käytetty runsaasti. Merkittävin tutkimushavainto oli, että joissakin yhteyksissä englannin kielen sana girl oli käännetty suomeksi sanalla nainen suoran käännösvastineen sijasta, koska suomen kielen sana tyttö ei kyseisissä konteksteissa olisi soveltunut käytettäväksi aikuisesta naisesta puhuttaessa. Suomalaisten tuottajien laatimassa englanninkielisessä mainoksessa esiintyi suurelta osin kuvaannollisia, sukupuolineutraaleja henkilöviittauksia, eikä girl-sanaa käytetty kertaakaan. Audiovisuaalisten käännösten kautta välittyvää naiskuvaa viihdegenren televisioohjelmissa on toistaiseksi tutkittu vähän, joten jatkotutkimusten kannalta vaihtoehtoja on runsaasti. Tulosten laajemman sovellettavuuden arvioimiseksi naisten puhuttelua voisi tutkia tarkemmin muissa, kansainvälisesti tunnetuissa tositv-formaateissa esimerkiksi vertailemalla eri maissa esitettäviä ohjelmaversioita.

Comparison of Different Concentrated Solar Power Collector Designs and Development of a Linear Fresnel Solar Collector Model

Concentrated solar power (CSP) is a renewable energy technology, which could contribute to overcoming global problems related to pollution emissions and increasing energy demand. CSP utilizes solar irradiation, which is a variable source of energy. In order to utilize CSP technology in energy production and reliably operate a solar field including thermal energy storage system, dynamic simulation tools are needed in order to study the dynamics of the solar field, to optimize production and develop control systems. The object of this Master’s Thesis is to compare different concentrated solar power technologies and configure a dynamic solar field model of one selected CSP field design in the dynamic simulation program Apros, owned by VTT and Fortum. The configured model is based on German Novatec Solar’s linear Fresnel reflector design. Solar collector components including dimensions and performance calculation were developed, as well as a simple solar field control system. The preliminary simulation results of two simulation cases under clear sky conditions were good; the desired and stable superheated steam conditions were maintained in both cases, while, as expected, the amount of steam produced was reduced in the case having lower irradiation conditions. As a result of the model development process, it can be concluded, that the configured model is working successfully and that Apros is a very capable and flexible tool for configuring new solar field models and control systems and simulating solar field dynamic behaviour.