ETYK III-vaihe (Tasavallan Presidentin esittämä Suomen puheenvuoro 31.7.1975 = Conference on Security and Co-operation in Europe = main speech of Finland delivered by President Urho Kekkonen July 31, 1975)

Puhe

Effects of Socioeconomic Status and Sociodemographic Features on Cardiovascular Disease. Mortality and Morbidity in Finland

Despite declining trends in morbidity and mortality, cardiovascular diseases have a considerable impact on Finnish public health. A goal in Finnish health policy is to reduce inequalities in health and mortality among population groups. The aim of this study was to assess inequalities in cardiovascular diseases according to socioeconomic status (SES), language groups and other sociodemographic characteristics. The main data source was generated from events in 35-99 year-old men and women registered in the population-based FINMONICA and FINAMI myocardial infarction registers during the years ranging from 1988-2002. Information on population group characteristics was obtained from Statistics Finland. Additional data were derived from the FINMONICA and FINSTROKE stroke registers and the FINRISK Study. SES, measured by income level, was a major determinant of acute coronary syndrome (ACS) mortality. Among middle-aged men, the 28-day mortality rate of the lowest group of six income groups was 5.2 times and incidence 2.7 times as high when compared to the highest income group. Among women, the differences were even larger. Among the unmarried, the incidence of ACS was approximately 1.6 times as high and their prognosis was significantly worse than among married persons - both in men and women and independent of age. Higher age-standardized attack rates of ACS and stroke were found among Finnish-speaking compared to Swedish-speaking men in Turku and these differences could not be completely explained by SES. In these language groups, modest differences were found in traditional risk factor levels possibly explaining part of the found morbidity and mortality inequality. In conclusion, there are considerable differences in the morbidity and mortality of ACS and stroke between socioeconomic and sociodemographic groups, in Finland. Focusing measures to reduce the excess morbidity and mortality, in groups at high risk, could decrease the economic burden of cardiovascular diseases and thus be an important public health goal in Finland.

Development and Effect Analysis of the Asteri Consultative Auditing Process - Safety and Security Management in Educational Institutions

The Finnish legislation requires for a safe and secure learning environment. However, the comprehensive, risk based safety and security management (SSM) and the management commitment in the implementation and development of the SSM are not mentioned in the legislation. Multiple institutions, operators and researchers have studied and developed safety and security in educational institutions over the past decade. Typically the approach has been fragmented and without bringing up the importance of the comprehensive SSM. The development needs of the safety and security operations in universities have been studied. However, in universities of applied sciences (UASs) and in elementary schools (ESs), the performance level, strengths and weaknesses of the comprehensive SSM have not been studied. The objective of this study was to develop the comprehensive, risk based SSM of educational institutions by developing the new Asteri consultative auditing process and study its effects on auditees. Furthermore, the performance level in the comprehensive SSM in UASs and ESs were studied using Asteri and the TUTOR model developed by the Keski-Uusimaa Department for Rescue Services. In addition, strengths, development needs and differences were identified. In total, 76 educational institutions were audited between the years 2011 and 2014. The study is based on logical empiricism, and an observational applied research design was used. Auditing, observation and an electronic survey were used for data collection. Statistical analysis was used to analyze the collected information. In addition, thematic analysis was used to analyze the development areas of the organizations mentioned by the respondents in the survey. As one of the main contributions, this research presents the new Asteri consultative auditing process. Organizations with low performance levels on the audited subject benefit the most from the Asteri consultative auditing process. Asteri may be usable in many different types of audits, not only in SSM audits. As a new result, this study provides new knowledge on attitudes related to auditing. According to the research findings, auditing may generate negative attitudes and the auditor should take them into account when planning and preparing for audits. Negative attitudes can be compensated by producing added value, objectivity and positivity for the audit and, thus, improve the positive effects of auditing on knowledge and skills. Moreover, as the results of this study shows, auditing safety and security issues do not increase feelings of insecurity, but rather increase feelings of safety and security when using the new Asteri consultative auditing process with the TUTOR model. The results showed that the SSM in the audited UASs was statistically significantly more advanced than that in the audited ESs. However, there is still room for improvement in the ESs and the UASs as the approach to the SSM was fragmented. It can be assumed that the majority of Finnish UASs and ESs do not likely meet the basic level of the comprehensive, risk based the SSM.

User Experience Patterns for/of Innovation by Design: A Survey on Design Practices in the Software Development and Innovation Lifecycle

The User Experience (UX) designers are undoubtedly aware of how many UX design methods currently exist and that sometimes it becomes a problem to choose an appropriate one. What are all of methods that designers have in their “arsenal”? When can they use them? This thesis presents the research on the design methods in the contemporary context of User Experience (UX) and Innovations by using a survey approach. The study is limited to cover the domain of consumer mobile services development and provider companies around the world. The study follows 2 clear objectives: (1) to understand what design methods are currently used in that context and to what extent they are used (2) to identify at what stage according to the UX design thinking process for creating innovations they are placed. The study contributes to the research in the field of UX design and Innovations and extends the knowledge in that field together with communities’ (UXPA, SIGCHI, SIGSOFT) members’ cooperation. The research is vital due to lack of information on design practices and their application in the chosen context.

Convergence and divergence in global economy and social development : global perspectives on the contents of economic and soical development policy and its effects on rich and poor countries

The study of convergence and divergence in global economy and social development utilises comparative indicators to investigate the contents of economic and social development policy and their effects on the global samples that represent the rich industrial, semi-industrial and the poor developing nations. The study searchesfor answers to questions such as "what are the objectives of economic growth policies in globalisation under the imperatives of convergence and divergence, and how do these affect human well-being in consideration to the objectives of social policy in various nations?" The empirical verification of data utilises the concepts of the `logic of industrialism´ for comparative analysis that focuses mainly on identifying the levels of well-being in world nations after the Second World War. The perspectives of convergence and divergence in global economy and social development critically examine the stages of early development processes in global economy, distinguish the differences between economy and social development, illustrate the contents of economic and social development policies, their effects on rich and poor countries, and the nature of convergence and divergence in propelling economic growth and unequal social development in world nations. The measurement of convergence and divergence in global economy and social development utilised both economic and social data that were combined into an index that measures the precise levels of the effects of economic and social development policies on human well-being in the rich and poor nations. The task of finding policy solutions to resolve the controversies are reviewed through empirical investigations and the analyses of trends indicated within economic and social indicators and data. These revealed how the adoption of social policy measures in translating the gains from economic growth, towards promoting education, public health, and equity, generate social progress and longer life expectancy, higher economic growth, and sustain more stable macro economy for the nations. Social policy is concerned with the translation of benefits from objectives of global economic growth policies, to objectives of social development policy in nation states. Social policy, therefore, represents an open door whereby benefits of economic growth policies are linked with the broader objectives of social development policy, thereby enhancing the possibility of extending benefits from economic growth to all human being in every nation.

Innovation and Internationalisation in Russian Companies: Challenges and Opportunities for Open Innovation and Cooperation

Increasing globalisation and intensified cross-border cooperation, together with significant technological breakthroughs, create a fascinating gap for the research of the relationship between internationalisation and innovation on national, regional and company levels in Russia. The intensified international trade between countries and regions benefited from favourable institutional conditions, and facilitated the technology transfer and the development of innovations on the national level. This study approaches the same question from the company perspective; if certain companies are more innovative than other domestic companies, will they start internationalisation more easily or get involved in cooperation with international stakeholders? When companies operate in international markets, how do they obtain knowledge? Moreover, would this new knowledge from the foreign market help then to increase innovativeness, competitiveness and develop operations in domestic/local and foreign markets? Considering the role of foreign direct investments (FDI), the research in hand tries to find out the role of companies with FDI on the other players on the home market. Do foreigners bring new technology, innovation to the country? Is there spillover effect observed and how local companies can benefit from them? This dissertation studies the internationalisation and innovation in Russian companies, both from the outward internationalisation and inward internationalisation perspectives. Russian companies developed quickly during the transition period, after the dissolution of the Soviet Union. The common background of these companies, the effects of the change of ownership, and some managerial difficulties make them more sensitive to competitions issues, and in this context, the opportunities brought by the developing innovations are seen in companies and on the governmental level.

Repair of segmental bone defects with fiber-reinforced composite: a study of material development and an animal model on rabbits

The Repair of segmental defects in load-bearing long bones is a challenging task because of the diversity of the load affecting the area; axial, bending, shearing and torsional forces all come together to test the stability/integrity of the bone. The natural biomechanical requirements for bone restorative materials include strength to withstand heavy loads, and adaptivity to conform into a biological environment without disturbing or damaging it. Fiber-reinforced composite (FRC) materials have shown promise, as metals and ceramics have been too rigid, and polymers alone are lacking in strength which is needed for restoration. The versatility of the fiber-reinforced composites also allows tailoring of the composite to meet the multitude of bone properties in the skeleton. The attachment and incorporation of a bone substitute to bone has been advanced by different surface modification methods. Most often this is achieved by the creation of surface texture, which allows bone growth, onto the substitute, creating a mechanical interlocking. Another method is to alter the chemical properties of the surface to create bonding with the bone – for example with a hydroxyapatite (HA) or a bioactive glass (BG) coating. A novel fiber-reinforced composite implant material with a porous surface was developed for bone substitution purposes in load-bearing applications. The material’s biomechanical properties were tailored with unidirectional fiber reinforcement to match the strength of cortical bone. To advance bone growth onto the material, an optimal surface porosity was created by a dissolution process, and an addition of bioactive glass to the material was explored. The effects of dissolution and orientation of the fiber reinforcement were also evaluated for bone-bonding purposes. The Biological response to the implant material was evaluated in a cell culture study to assure the safety of the materials combined. To test the material’s properties in a clinical setting, an animal model was used. A critical-size bone defect in a rabbit’s tibia was used to test the material in a load-bearing application, with short- and long-term follow-up, and a histological evaluation of the incorporation to the host bone. The biomechanical results of the study showed that the material is durable and the tailoring of the properties can be reproduced reliably. The Biological response - ex vivo - to the created surface structure favours the attachment and growth of bone cells, with the additional benefit of bioactive glass appearing on the surface. No toxic reactions to possible agents leaching from the material could be detected in the cell culture study when compared to a nontoxic control material. The mechanical interlocking was enhanced - as expected - with the porosity, whereas the reinforcing fibers protruding from the surface of the implant gave additional strength when tested in a bone-bonding model. Animal experiments verified that the material is capable of withstanding load-bearing conditions in prolonged use without breaking of the material or creating stress shielding effects to the host bone. A Histological examination verified the enhanced incorporation to host bone with an abundance of bone growth onto and over the material. This was achieved with minimal tissue reactions to a foreign body. An FRC implant with surface porosity displays potential in the field of reconstructive surgery, especially regarding large bone defects with high demands on strength and shape retention in load-bearing areas or flat bones such as facial / cranial bones. The benefits of modifying the strength of the material and adjusting the surface properties with fiber reinforcement and bone-bonding additives to meet the requirements of different bone qualities are still to be fully discovered.