Promoting Growth in the Use of Bioenergy in Europe by Converting Existing Coal-Fired Power Plants to Biomass

Repowering existing power plants by replacing coal with biomass might offer an interesting option to ease the transition from fossil fuels to renewable energy sources and promote a fur-ther expansion of bioenergy in Europe, on account of the potential to decrease greenhouse gas emissions, as well as other pollutants (SOx, NOx, etcetera). In addition, a great part of the appeal of repowering projects comes from the opportunity to reuse the vast existing invest-ment and infrastructure associated with coal-based power generation. Even so, only a limited number of experiences with repowering are found. Therefore, efforts are required to produce technical and scientific evidence to determine whether said technology might be considered feasible for its adoption within European conditions. A detailed evaluation of the technical and economic aspects of this technology constitutes a powerful tool for decision makers to define the energy future for Europe. To better illustrate this concept, a case study is analyzed. A Slovakian pulverized coal plant was used as the basis for determining the effects on perfor-mance, operation, maintenance and cost when fuel is shifted to biomass. It was found that biomass fuel properties play a crucial role in plant repowering. Furthermore, results demon-strate that this technology offers renewable energy with low pollutant emissions at the cost of reduced capacity, relatively high levelized cost of electricity and sometimes, a maintenance-intensive operation. Lastly, regardless of the fact that existing equipment can be reutilized for the most part, extensive additions/modifications may be required to ensure a safe operation and an acceptable performance.

Assessment of Customer Needs in Fine Coal Dewatering

Työn tavoitteena on kartoittaa ja arvioida asiakastarpeita hienojakoisen hiilen ja nesteen erotuksessa. Aluksi työssä kuvataan hiiliteollisuutta, jonka jälkeen syvennytäänhiilen ja nesteen erotukseen. Tämän jälkeen keskitytään asiakastarpeiden kartoittamiseen. Jo olemassaolevan tiedon keräämiseen käytetään haastatteluja ja kysymyslomakkeita. Saatyn AHP-mallia hyödynnetään asiakastarpeiden arvioinnissa. Yksi suurimmista haasteista puhtaan hiiliteknologian käytössä on kustannustehokas nesteen ja hienojakoisen hiilen erotus, joka on tärkeää rahtauskustannusten minimoinnin, laatuvaatimusten täyttämisen ja prosessiveden kierrättämisen kannalta. Tekniset ominaisuudet ja kustannukset ovat tärkeimmät ominaisuudet hiilen ja veden suodatinratkaisussa asiantuntijoiden mukaan. Asiakkaan mukaan laatu, tekniset ominaisuudet ja tukipalvelut ovat tärkeitä.Sekä asiakkaan että asiantuntijoiden mielestä korkea yksikkökapasiteetti, matala lopputuotteen kosteus ja luotettavuus ovat tärkeimmät tekniset ominaisuudet. Investointikustannukset ovat noin kolme kertaa tärkeämpiä kuin käyttökustannukset. Asiakkaan mukaan laitetoimittajan ominaisuudet ovat tärkeämpiä kuin teknologiset ominaisuudet.

Esiselvitys puupolttoaineen jalostamisesta torrefiointitekniikalla

Fossiilisten polttoaineiden käytöstä aiheutuvia kasvihuonekaasupäästöjä pyritään vähentämään EU:ssa mm. päästökaupan avulla. Uusiutumattomien polttoaineiden tilalle kehitetään biopolttoaineita, joita voidaan hyödyntää olemassa olevien voimalaitosten polttolaitteistoilla. Biopolttoaineiden etuna on, ettäniiden ei katsota lisäävän hiilidioksidipäästöjä, koska biomassa sitoo itseensä kasvaessaan poltossa vapautuvan määrän hiiltä. Eräs kiinnostavimmista jalostetuista biopolttoaineista on torrefioitu puu, joka vastaa useimmilta ominaisuuksiltaan kivihiiltä ja jota voidaan käyttää hiilivoimalaitoksissa ilman laitteistomuutoksia. Torrefiointi on puun eräänlaista paistamista hapettomissa olosuhteissa 250-270ºC:ssa, jolloin siitä saadaanpoistettua vesi ja osa haihtuvista aineista. Puun väri muuttuu suklaanruskeaksi, se kevenee, ei savuta poltettaessa, hylkii vettä, jauhautuu hyvin sekä sillä on pienet hiukkaspäästöt. Käsitellyn puun ominaisuudet muuttuvat säilyvyydeltään ja käyttöominaisuuksiltaan merkittävästi raaka-aineeseen verrattuna. Torrefioinnilla saavutetaan puulle polttoainekäytön kannalta myös paremmat ja kestävämmät ominaisuudet kuin hiiltämällä. Torrefiointiprosessia on tutkittu jonkin verran ja torrefioidun biomassan polttoa voimalaitosmittakaavassa on kokeiltu pienessä mittakaavassa. Torrefioitu materiaali on alhaisen tiheytensä vuoksi hankalaa ja kallista kuljettaa,joten sen tiheyttä tulee nostaa kuljetuksia varten tiivistämällä esim.pelletöimällä. Torrefionti yhdistettynä pelletöintiin on parhaimmillaan kilpailukykyinen vaihtoehto, kun kivihiiltä korvaavaa biomassaa jalostetaan kaukana käyttöpaikasta ja kuljetetaan irtotavarana aluskuljetuksina. Torrefioitua puuta on tiettävästi poltettu vain hollantilaisessa voimalaitoksessa. Tässä esiselvityksessä kootun tiedon perusteella torrefioidun puupolttoaineen tuottamiseen Suomen olosuhteissa arvioidaan olevan teknis-taloudellisia mahdollisuuksia. Kuitenkin torrefiointiprosessin soveltaminen suomen olosuhteisiin ja kotimaisiin raakaaineisiin vaatii panostusta jatkotutkimukseen ennen varsinaiseen toteutusvaiheeseen siirtymistä.

Ash Particle Erosion on Steam Boiler Convective Section

In this study, equations for the calculation of erosion wear caused by ash particles on convective heat exchanger tubes of steam boilers are presented. Anew, three-dimensional test arrangement was used in the testing of the erosion wear of convective heat exchanger tubes of steam boilers. When using the sleeve-method, three different tube materials and three tube constructions could be tested. New results were obtained from the analyses. The main mechanisms of erosionwear phenomena and erosion wear as a function of collision conditions and material properties have been studied. Properties of fossil fuels have also been presented. When burning solid fuels, such as pulverized coal and peat in steam boilers, most of the ash is entrained by the flue gas in the furnace. In bubbling andcirculating fluidized bed boilers, particle concentration in the flue gas is high because of bed material entrained in the flue gas. Hard particles, such as sharp edged quartz crystals, cause erosion wear when colliding on convective heat exchanger tubes and on the rear wall of the steam boiler. The most important ways to reduce erosion wear in steam boilers is to keep the velocity of the flue gas moderate and prevent channelling of the ash flow in a certain part of the cross section of the flue gas channel, especially near the back wall. One can do this by constructing the boiler with the following components. Screen plates can beused to make the velocity and ash flow distributions more even at the cross-section of the channel. Shield plates and plate type constructions in superheaters can also be used. Erosion testing was conducted with three types of tube constructions: a one tube row, an inline tube bank with six tube rows, and a staggered tube bank with six tube rows. Three flow velocities and two particle concentrations were used in the tests, which were carried out at room temperature. Three particle materials were used: quartz, coal ash and peat ash particles. Mass loss, diameter loss and wall thickness loss measurements of the test sleeves were taken. Erosion wear as a function of flow conditions, tube material and tube construction was analyzed by single-variable linear regression analysis. In developing the erosion wear calculation equations, multi-variable linear regression analysis was used. In the staggered tube bank, erosion wear had a maximum value in a tube row 2 and a local maximum in row 5. In rows 3, 4 and 6, the erosion rate was low. On the other hand, in the in-line tube bank the minimum erosion rate occurred in tube row 2 and in further rows the erosion had an increasing value, so that in a six row tube bank, the maximum value occurred in row 6.

Simulation and optimization of IGCC technique for power generation and hydrogen production by using lignite Thar coal and cotton stalk

The purpose of this study was to simulate and to optimize integrated gasification for combine cycle (IGCC) for power generation and hydrogen (H2) production by using low grade Thar lignite coal and cotton stalk. Lignite coal is abundant of moisture and ash content, the idea of addition of cotton stalk is to increase the mass of combustible material per mass of feed use for the process, to reduce the consumption of coal and to increase the cotton stalk efficiently for IGCC process. Aspen plus software is used to simulate the process with different mass ratios of coal to cotton stalk and for optimization: process efficiencies, net power generation and H2 production etc. are considered while environmental hazard emissions are optimized to acceptance level. With the addition of cotton stalk in feed, process efficiencies started to decline along with the net power production. But for H2 production, it gave positive result at start but after 40% cotton stalk addition, H2 production also started to decline. It also affects negatively on environmental hazard emissions and mass of emissions/ net power production increases linearly with the addition of cotton stalk in feed mixture. In summation with the addition of cotton stalk, overall affects seemed to negative. But the effect is more negative after 40% cotton stalk addition so it is concluded that to get maximum process efficiencies and high production less amount of cotton stalk addition in feed is preferable and the maximum level of addition is estimated to 40%. Gasification temperature should keep lower around 1140 °C and prefer technique for studied feed in IGCC is fluidized bed (ash in dry form) rather than ash slagging gasifier

Biopolttoaineen rinnakkaispolton kannattavuustarkastelu hiilipölypolttokattilassa Martinlaakso 2:ssa

Euroopan unionin asettamat tavoitteet kasvihuonepäästöjen vähennykselle johtavat vih-reämpään teknologiaan. Tämä diplomityö on teoreettinen tutkimus, joka käsittelee biopolt-toaineen rinnakkaispolton kannattavuutta Vantaan Energian Martinlaakso 2:sen hiilipöly-polttokattilassa. Työssä perehdytään viiteen eri biopolttoainevaihtoehtoon, joita tarkastellaan viidessä eri skenaariossa, jotka vastaavat: 10, 20, 30, 40 ja 50 % biopolttoaineen osuutta kattilassa tuo-tetusta energiasta. Skenaarioissa on pohdittu tarvittavia investointikustannuksia ja muutos-töitä hiilipölypolttokattilassa. Tutkimuksessa on huomioitu myös uusi isojen laitosten pääs-töjä koskeva direktiivi, kattilan oletettava käyttöikä sekä biopolttoaineiden tuet. Saaduista arvioista on lopuksi laskettu vuosittainen polttoainekohtainen kustannusarvio ja investoin-nin kannattavuusarvio. Tuloksista voidaan päätellä, että sahanpurun mahdollisimman suuri hyötykäyttö on kannat-tavaa. Mikäli halutaan käyttää suuria määriä biopolttoainetta, (yli 20 % tuotetusta energias-ta) ei sahanpuru ole varteenotettava vaihtoehto huonon saatavuutensa johdosta. Tällöin hakkeen kaasutuslaitos olisi paras ratkaisu, mutta laitoksen kannattavuus riippuu tulevista energiatuista. Ilman energiatukia sahanpurun hyötykäyttö on ainoa kannattava investointi.

Oxidation rates of carbon and nitrogen in char residues from solid fuels

Computational fluid dynamics (CFD) modeling is an important tool in designing new combustion systems. By using CFD modeling, entire combustion systems can be modeled and the emissions and the performance can be predicted. CFD modeling can also be used to develop new and better combustion systems from an economical and environmental point of view. In CFD modeling of solid fuel combustion, the combustible fuel is generally treated as single fuel particles. One of the limitations with the CFD modeling concerns the sub-models describing the combustion of single fuel particles. Available models in the scientific literature are in many cases not suitable as submodels for CFD modeling since they depend on a large number of input parameters and are computationally heavy. In this thesis CFD-applicable models are developed for the combustion of single fuel particles. The single particle models can be used to improve the combustion performance in various combustion devices or develop completely new technologies. The investigated fields are oxidation of carbon (C) and nitrogen (N) in char residues from solid fuels. Modeled char-C oxidation rates are compared to experimental oxidation rates for a large number of pulverized solid fuel chars under relevant combustion conditions. The experiments have been performed in an isothermal plug flow reactor operating at 1123-1673 K and 3-15 vol.% O2. In the single particle model, the char oxidation is based on apparent kinetics and depends on three fuel specific parameters: apparent pre-exponential factor, apparent activation energy, and apparent reaction order. The single particle model can be incorporated as a sub-model into a CFD code. The results show that the modeled char oxidation rates are in good agreement with experimental char oxidation rates up to around 70% of burnout. Moreover, the results show that the activation energy and the reaction order can be assumed to be constant for a large number of bituminous coal chars under conditions limited by the combined effects of chemical kinetics and pore diffusion. Based on this, a new model based on only one fuel specific parameter is developed (Paper III). The results also show that reaction orders of bituminous coal chars and anthracite chars differ under similar conditions (Paper I and Paper II); reaction orders of bituminous coal chars were found to be one, while reaction orders of anthracite chars were determined to be zero. This difference in reaction orders has not previously been observed in the literature and should be considered in future char oxidation models. One of the most frequently used comprehensive char oxidation models could not explain the difference in the reaction orders. In the thesis (Paper II), a modification to the model is suggested in order to explain the difference in reaction orders between anthracite chars and bituminous coal chars. Two single particle models are also developed for the NO formation and reduction during the oxidation of single biomass char particles. In the models the char-N is assumed to be oxidized to NO and the NO is partly reduced inside the particle. The first model (Paper IV) is based on the concentration gradients of NO inside and outside the particle and the second model is simplified to such an extent that it is based on apparent kinetics and can be incorporated as a sub-model into a CFD code (Paper V). Modeled NO release rates from both models were in good agreement with experimental measurements from a single particle reactor of quartz glass operating at 1173-1323 K and 3-19 vol.% O2. In the future, the models can be used to reduce NO emissions in new combustion systems.

Map of a part of eastern Asia to show the commercial position of the productive coal fields of Yesso, Japan

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

A geological and topographical sketch map of the New York and Westmoreland Gas Coal Company's lands, at Manor Sta., Westm'd Co., Pa.

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Biomass Utilization in PFC Co-firing System with the Slagging and Fouling Analysis

Master’s thesis Biomass Utilization in PFC Co-firing System with the Slagging and Fouling Analysis is the study of the modern technologies of different coal-firing systems: PFC system, FB system and GF system. The biomass co-fired with coal is represented by the research of the company Alstom Power Plant. Based on the back ground of the air pollution, greenhouse effect problems and the national fuel security today, the bioenergy utilization is more and more popular. However, the biomass is promoted to burn to decrease the emission amount of carbon dioxide and other air pollutions, new problems form like slagging and fouling, hot corrosion in the firing systems. Thesis represent the brief overview of different coal-firing systems utilized in the world, and focus on the biomass-coal co-firing in the PFC system. The biomass supply and how the PFC system is running are represented in the thesis. Additionally, the new problems of hot corrosion, slagging and fouling are mentioned. The slagging and fouling problem is simulated by using the software HSC Chemistry 6.1, and the emissions comparison between coal-firing and co-firing are simulated as well.

Preparation and Investigation of Bio-coal Mixture Fuels Used in Large Diesel Engines

Coal slurry was of vital interest during the last century due to its potential as an alternative fuel where liquid fuels were necessary. Recently, environmental impacts of the traditional fuels, similarities of bio-coal to that of coal, and huge bio-coal supply has attracted the attention to prepare bio-coal slurries as a new fuel. Rudolf Diesel who invented the diesel engine on 1895 was of the opinion that diesel engines are capable to use different kinds of fuels due to the special design. He tried some kind of vegetable oil to operate on his IC engine. Recently, due to high energy density and more environmentally friendly fuel, researchers believe that bio-coal slurries could act as a new alternative fuel in large diesel engines. Loads of research on different kinds of bio-coal slurry were done by the other researchers worldwide and a lot of progress to boost slurry’s quality were achieved recently. The present study aims to achieve the ideal condition of different factors affecting on the quality of bio-coal slurry. One charcoal sample and two kinds of torrefied wood were used to investigate and compare the reaction of various factors. The results show a great gap between the quality of slurries made of different samples and more researches are necessary to fully understand the impact of the different parameter and improving the quality.