6 resultados para Canal Arterial Patente
em Doria (National Library of Finland DSpace Services) - National Library of Finland, Finland
Resumo:
London : Methuen & Co. Ltd 1915
Resumo:
Fibre-reinforced composite (FRC) root canal posts are suggested to have biomechanical benefits over traditional metallic posts, but they lack good adhesion to resin composites. The aim of this series of studies was to evaluate the adhesion of individually formed fibre-reinforced composite material to composite resin and dentin, as well as some mechanical properties. Flexural properties were evaluated and compared between individually formed FRC post material and different prefabricated posts. The depth of polymerization of the individually formed FRC post material was evaluated with IR spectrophotometry and microhardness measurements, and compared to that of resin without fibres. Bonding properties of the individually formed FRC post to resin cements and dentin were tested using Pull-out- and Push-out-force tests, evaluated with scanning electron microscopy, and compared to those of prefabricated FRC and metal posts. Load-bearing capacity and microstrain were evaluated and failure mode assessment was made on incisors restored with individually formed FRC posts of different structures and prefabricated posts. The results of these studies show that the individually polymerized and formed FRC post material had higher flexural properties compared to the commercial prefabricated FRC posts. The individually polymerized FRC material showed almost the same degree of conversion after light polymerization as monomer resin without fibres. Moreover, it was found that the individually formed FRC post material with a semiinterpenetrating polymer network (IPN) polymer matrix bonded better to composite resin luting cement, than did the prefabricated posts with a cross-linked polymer matrix. Furthermore, it was found that, contrary to the other posts, there were no adhesive failures between the individually formed FRC posts and composite resin luting cement. This suggests better interfacial adhesion of cements to these posts. Although no differences in load-bearing capacity or microstrain could be seen, the incisors restored with individually formed FRC posts with a hollow structure showed more favourable failures compared to other prefabricated posts. These studies suggest that it is possible to use individually formed FRC material with semi-IPN polymer matrix as root canal post material. They also indicate that there are benefits especially regarding the bonding properties to composite resin and dentin with this material compared to prefabricated FRC post material with a cross-linked matrix. Furthermore, clinically more repairable failures were found with this material compared to those of prefabricated posts.
Resumo:
The transport of macromolecules, such as low-density lipoprotein (LDL), and their accumulation in the layers of the arterial wall play a critical role in the creation and development of atherosclerosis. Atherosclerosis is a disease of large arteries e.g., the aorta, coronary, carotid, and other proximal arteries that involves a distinctive accumulation of LDL and other lipid-bearing materials in the arterial wall. Over time, plaque hardens and narrows the arteries. The flow of oxygen-rich blood to organs and other parts of the body is reduced. This can lead to serious problems, including heart attack, stroke, or even death. It has been proven that the accumulation of macromolecules in the arterial wall depends not only on the ease with which materials enter the wall, but also on the hindrance to the passage of materials out of the wall posed by underlying layers. Therefore, attention was drawn to the fact that the wall structure of large arteries is different than other vessels which are disease-resistant. Atherosclerosis tends to be localized in regions of curvature and branching in arteries where fluid shear stress (shear rate) and other fluid mechanical characteristics deviate from their normal spatial and temporal distribution patterns in straight vessels. On the other hand, the smooth muscle cells (SMCs) residing in the media layer of the arterial wall respond to mechanical stimuli, such as shear stress. Shear stress may affect SMC proliferation and migration from the media layer to intima. This occurs in atherosclerosis and intimal hyperplasia. The study of blood flow and other body fluids and of heat transport through the arterial wall is one of the advanced applications of porous media in recent years. The arterial wall may be modeled in both macroscopic (as a continuous porous medium) and microscopic scales (as a heterogeneous porous medium). In the present study, the governing equations of mass, heat and momentum transport have been solved for different species and interstitial fluid within the arterial wall by means of computational fluid dynamics (CFD). Simulation models are based on the finite element (FE) and finite volume (FV) methods. The wall structure has been modeled by assuming the wall layers as porous media with different properties. In order to study the heat transport through human tissues, the simulations have been carried out for a non-homogeneous model of porous media. The tissue is composed of blood vessels, cells, and an interstitium. The interstitium consists of interstitial fluid and extracellular fibers. Numerical simulations are performed in a two-dimensional (2D) model to realize the effect of the shape and configuration of the discrete phase on the convective and conductive features of heat transfer, e.g. the interstitium of biological tissues. On the other hand, the governing equations of momentum and mass transport have been solved in the heterogeneous porous media model of the media layer, which has a major role in the transport and accumulation of solutes across the arterial wall. The transport of Adenosine 5´-triphosphate (ATP) is simulated across the media layer as a benchmark to observe how SMCs affect on the species mass transport. In addition, the transport of interstitial fluid has been simulated while the deformation of the media layer (due to high blood pressure) and its constituents such as SMCs are also involved in the model. In this context, the effect of pressure variation on shear stress is investigated over SMCs induced by the interstitial flow both in 2D and three-dimensional (3D) geometries for the media layer. The influence of hypertension (high pressure) on the transport of lowdensity lipoprotein (LDL) through deformable arterial wall layers is also studied. This is due to the pressure-driven convective flow across the arterial wall. The intima and media layers are assumed as homogeneous porous media. The results of the present study reveal that ATP concentration over the surface of SMCs and within the bulk of the media layer is significantly dependent on the distribution of cells. Moreover, the shear stress magnitude and distribution over the SMC surface are affected by transmural pressure and the deformation of the media layer of the aorta wall. This work reflects the fact that the second or even subsequent layers of SMCs may bear shear stresses of the same order of magnitude as the first layer does if cells are arranged in an arbitrary manner. This study has brought new insights into the simulation of the arterial wall, as the previous simplifications have been ignored. The configurations of SMCs used here with elliptic cross sections of SMCs closely resemble the physiological conditions of cells. Moreover, the deformation of SMCs with high transmural pressure which follows the media layer compaction has been studied for the first time. On the other hand, results demonstrate that LDL concentration through the intima and media layers changes significantly as wall layers compress with transmural pressure. It was also noticed that the fraction of leaky junctions across the endothelial cells and the area fraction of fenestral pores over the internal elastic lamina affect the LDL distribution dramatically through the thoracic aorta wall. The simulation techniques introduced in this work can also trigger new ideas for simulating porous media involved in any biomedical, biomechanical, chemical, and environmental engineering applications.
Resumo:
Lower extremity peripheral arterial disease (PAD) is associated with decreased functional status, diminished quality of life (QoL), amputation, myocardial infarction, stroke, and death. Nevertheless, public awareness of PAD as a morbid and mortal disease is low. The aim of this study was to assess the incidence of major lower extremity amputation due to PAD, the extent of reamputations, and survival after major lower extremity amputation (LEA) in a population based PAD patient cohort. Furthermore, the aim was to assess the functional capacity in patients with LEA, and the QoL after lower extremity revascularization and major amputation. All 210 amputees due to PAD in 1998–2002 and all 519 revascularized patients in 1998–2003 were explored. 59 amputees alive in 2004 were interviewed using a structured questionnaire of QoL. Two of each amputee age-, gender- and domicile-matched controls filled in and returned postal self-administered QoL questionnaire as well as 231 revascularized PAD patients (the amount of these patients who engaged themselves to the study), and one control person for each patient completed postal self-administered QoL questionnaire. The incidence rate of major LEA was 24.1/100 000 person-years and it was considerably high during the years studied. The one-month mortality rate was 21%, 52% at one-year, and the overall mortality rate was 80%. When comparing the one-year mortality risk of amputees, LEAs were associated with a 7.4-fold annual mortality risk compared with the reference population in Turku. Twenty-two patients (10%) had ipsilateral transversions from BK to AK amputation. Fifty patients (24%) ended up with a contralateral major LEA within two to four amputation operations. Three bilateral amputations were performed at the first major LEA operation. Of the 51 survivors returning home after their first major LEA, 36 (71%) received a prosthesis; (16/36, 44%) and were able to walk both in- and outdoors. Of the 68 patients who were discharged to institutional care, three (4%) had a prosthesis one year after LEA. Both amputees and revascularized patients had poor physical functioning and significantly more depressive symptoms than their controls. Depressive symptoms were more common in the institutionalized amputees than the home-dwelling amputees. The surviving amputees and their controls had similar life satisfaction. The amputees felt themselves satisfied and contented, whether or not they lived in long-term care or at home. PAD patients who had undergone revascularizations had poorer QoL than their controls. The revascularized patients’ responses on their perceived physical functioning gave an impression that these patients are in a declining life cycle and that revascularizations, even when successful, may not be sufficient to improve the overall function. It is possible that addressing rehabilitation issues earlier in the care may produce a more positive functional outcome. Depressive symptoms should be recognized and thoroughly considered at the same time the patients are recovering from their revascularization operation. Also primary care should develop proper follow-up, and community organizations should have exercise groups for those who are able to return home, since they very often live alone. In rehabilitation programs we should consider not only physical disability assessment but also QoL.
Resumo:
Hannu Raittilan Venetsiaan sijoittuva romaani Canal Grande (2001) on läpeensä intertekstuaalinen. Se viittaa paitsi tunnettuun Venetsia-kirjallisuuteen myös lukemattomiin taideteoksiin ja kulttuurihistoriallisiin kerrostumiin. Artikkelissa tutkitaan Canal Granden kirjallisen näyttämön ja romaanin tematiikan välistä yhteyttä sekä henkilöhahmojen kytkeytymistä commedia dell’arte -perinteeseen, johon romaani viittaa suoraan paitsi henkilöiden välisissä keskusteluissa myös kuvaamalla Venetsian karnevaalia.