12 resultados para Callospermarion cf. undulatw
em Doria (National Library of Finland DSpace Services) - National Library of Finland, Finland
Resumo:
Ultrafiltration (UF) is widely applied in different separation processes in the pulp and paper industry. The growing need to protect the environment, a lack of pure water and an interest in producing high-value chemicals from compounds present in process waters will probably lead to an increase in the use of UF in the pulp and paper industry. The efficiency and cost-effectiveness of a UF process depends on the applied membrane. The membrane should have a high and stable filtration capacity, a particular selectivity and a long operational lifetime. To meet these requirements a membrane should have a low fouling tendency. In addition, it should withstand the prevailing operational and chemical conditions. This thesis evaluates the performance and applicability of the regenerated cellulose (RC) membranes 00030T and C2 in the treatment of pulp and paper mill process waters based on the requirements above. The results demonstrated that both the tested RC membranes fulfilled well the requirement of high filtration capacity. In addition, in the filtration of a paper mill clear filtrate (CF) the RC membranes were not as greatly affected by variations in the CF quality as a polysulphone membrane. Furthermore, due to their extreme hydrophilicity and weak charge the fouling tendency of the membranes can be expected to be low in pulp and paper mill filtration applications. It is, however, known that fouling cannot be totally avoided even when the membrane is chosen very carefully. This study indicated that carbohydrates influenced negatively on permeability and caused fouling in the filtration of groundwood mill circulation water. Thus, a pre-treatment effectively reducing the amount of carbohydrates might help to maintain a stable capacity. However, the results of the thesis also showed that the removal of some of the possible foulants might just increase the harmful effect of others. Multivariate examination was useful in the understanding of the complicated factors causing the unstable capacity. The thesis also revealed that the 00030T and C2 membranes can be used at high pressure (max. tested pressure 12 bar). The C2 membrane, having a sponge-like substructure, was more pressure resistant, and its performance was more stable at high pressure compared to the UCO30T membrane containing macrovoids in its substructure. Both tested membranes can, according to the results, also be used at temperatures as high as 70°C in acidic, neutral and alkaline conditions. However, the use at extreme conditions might cause faster ageing of the membranes compared to ageing in neutral conditions. The thesis proved that both the tested RC membranes are very suitable for pulp and paper mill applications and that the membranes can be utilised in processes operating in challenging conditions. Thus, they could be used in more demanding applications than supposed earlier.
Resumo:
Tämän tutkielman tavoitteena on selvittää pystytäänkö momentum-strategiaa hyödyntämällä parantamaan arvostrategian tuottoja Suomen osakemarkkinoilla. Yhdistetyn arvo- ja momentum-strategian lisäksi tutkitaan myös arvosrategian menestystä. Tutkimuksessa arvostusmittareina on käytetty P/E-, P/B-, P/CF-, P/S-, P/D-, EV/EBITDA-lukuja sekä kolmea näistä muodostettua yhdistelmätunnuslukua. Tutkimusaineisto koostuu Suomen osakemarkkinoilla julkisesti noteerattujen osakkeiden tuottoaikasarjoista vuosilta 1992-2008. Osakkeet on järjestetty tunnuslukujen ja momentum-indikaattorien perusteella kolmeen tertiiliportfolioon. Sijoitusten pitoaikana on käytetty yhtä ja kolmea vuotta. Portfolioista on raportoitu keskimääräisen vuosituoton lisäksi riskikorjattu tuotto Sharpen luvulla ja Jensenin alfalla mitattuna sekä näiden tilastollinen merkitsevyys. Tulosten perusteella voidaan päätellä, ettei momentum-strategian avulla pystytä parantamaan arvostrategian tuottoja Suomen osakemarkkinoilla. Arvostrategia menestyi kuitenkin erittäin hyvin etenkin yhdistelmätunnuslukujen sekä P/D-, EV/EBITDA- ja P/E-lukujen osalta.
Resumo:
The purpose of the thesis is to examine the added value of combining value and momentum indicators in the Swiss stock exchange. Value indicators employed are P/E, EV/EBITDA, P/CF, P/B ja P/S. Momentum indicators examined are 52-week high, acceleration rate, 12-month past return and 6-month past return. The thesis examines whether the composite value measures based on the above mentioned ratios can add value and whether the inclusion of momentum can further improve the risk return profile of the value portfolios. The data is gathered from the Swiss equity market during the sample period from May 2001 to May 2011. Previous studies have shown that composite value measures can somewhat add value to the value portfolio strategy. Similarly, recent academic literature have found evidence that momentum works well as a timing indicator for time to entry to value stocks. This study indicates that the added value of composite value measures exists. It also shows that momentum combined to acceleration rate can significantly improve the risk adjusted performance of value-only portfolios.
Resumo:
Puolustusvoimat on Suomen suurin kuntokoulu. Puolustusvoimien liikuntakoulutus on julkisessa keskustelussa esillä oleva asia. Liikunta on tärkeä kansanterveyttä edistävä tekijä, jonka vuoksi varusmiehille tulisi jäädä innostus liikuntaan palveluksen jälkeen heidän siirtyessään reserviin. On tarpeellista tutkia uusien urheilulajien käyttöä koulutuksessa. Tutkielmassa tarkastellaan CrossFit (Cf)-harjoittelua, kuvataan sen metodiikkaa ja harjoittelun toteuttamista ja tuodaan lajin harjoitusmetodien vaikutusmekanismit esille. Cfharjoittelusta tehdyn tutkimuksen tulokset esitellään. Tutkielmassa verrattiin Cf-harjoittelua ja nykymuotoista lihaskuntokoulutusta toisiinsa. Vertailu suoritettiin kolmen eri kriteerin suhteen: harjoittelun vaikuttavuus fyysiseen suorituskykyyn, harjoittelun vaatimat tilat ja resurssit sekä lähtötason mukaan. Lisäksi Cfharjoittelusta laadittiin nelikenttäanalyysi. Cf-harjoittelun todettiin vaikuttavan useampaan fyysisen suorituskyvyn osa-alueeseen, kuin nykymuotoinen lihaskuntokoulutus. Kuitenkin muut liikunnan osa-alueet, kuten esimerkiksi kamppailukoulutus, hiihto, suunnistus ja lenkkeily tulee säilyttää mukana koulutuksessa. Tilojen ja resurssien puolesta laji mahdollistaa harjoittelun joustavasti ja periaatteessa siellä, missä joukko toimiikin. Yksikön harjoitteluun tarvitsema materiaali voidaan säilyttää yksikössä. Cf-harjoittelu huomioi yksilöllisesti ja uudella tavalla lähtötason. Harjoittelussa ei tarvitse myöskään erillisiä tasoryhmiä, koska tehtävien liikkeiden kuormittavuus tai vaikeus määritetään jokaiselle erikseen. Tämä edesauttaa ryhmäkiinteyden muodostumista palveluksen alusta alkaen. Nelikenttäanalyysissä löydettiin vahvuuksia ja mahdollisuuksia enemmän kuin heikkouksia ja uhkia. Negatiivisina havaittiin harjoittelun toteuttamiseen ja henkilökunnan kouluttamiseen ja sitouttamiseen liittyvät seikat. Analyysin pohjalta voidaan todeta, että lajia on mahdollista käyttää varusmiesten liikuntakoulutukseen. Se voi luoda myös lisää mahdollisuuksia liikunnan harrastamisella varusmiespalveluksen jälkeen.
Resumo:
The focus of the present work was on 10- to 12-year-old elementary school students’ conceptual learning outcomes in science in two specific inquiry-learning environments, laboratory and simulation. The main aim was to examine if it would be more beneficial to combine than contrast simulation and laboratory activities in science teaching. It was argued that the status quo where laboratories and simulations are seen as alternative or competing methods in science teaching is hardly an optimal solution to promote students’ learning and understanding in various science domains. It was hypothesized that it would make more sense and be more productive to combine laboratories and simulations. Several explanations and examples were provided to back up the hypothesis. In order to test whether learning with the combination of laboratory and simulation activities can result in better conceptual understanding in science than learning with laboratory or simulation activities alone, two experiments were conducted in the domain of electricity. In these experiments students constructed and studied electrical circuits in three different learning environments: laboratory (real circuits), simulation (virtual circuits), and simulation-laboratory combination (real and virtual circuits were used simultaneously). In order to measure and compare how these environments affected students’ conceptual understanding of circuits, a subject knowledge assessment questionnaire was administered before and after the experimentation. The results of the experiments were presented in four empirical studies. Three of the studies focused on learning outcomes between the conditions and one on learning processes. Study I analyzed learning outcomes from experiment I. The aim of the study was to investigate if it would be more beneficial to combine simulation and laboratory activities than to use them separately in teaching the concepts of simple electricity. Matched-trios were created based on the pre-test results of 66 elementary school students and divided randomly into a laboratory (real circuits), simulation (virtual circuits) and simulation-laboratory combination (real and virtual circuits simultaneously) conditions. In each condition students had 90 minutes to construct and study various circuits. The results showed that studying electrical circuits in the simulation–laboratory combination environment improved students’ conceptual understanding more than studying circuits in simulation and laboratory environments alone. Although there were no statistical differences between simulation and laboratory environments, the learning effect was more pronounced in the simulation condition where the students made clear progress during the intervention, whereas in the laboratory condition students’ conceptual understanding remained at an elementary level after the intervention. Study II analyzed learning outcomes from experiment II. The aim of the study was to investigate if and how learning outcomes in simulation and simulation-laboratory combination environments are mediated by implicit (only procedural guidance) and explicit (more structure and guidance for the discovery process) instruction in the context of simple DC circuits. Matched-quartets were created based on the pre-test results of 50 elementary school students and divided randomly into a simulation implicit (SI), simulation explicit (SE), combination implicit (CI) and combination explicit (CE) conditions. The results showed that when the students were working with the simulation alone, they were able to gain significantly greater amount of subject knowledge when they received metacognitive support (explicit instruction; SE) for the discovery process than when they received only procedural guidance (implicit instruction: SI). However, this additional scaffolding was not enough to reach the level of the students in the combination environment (CI and CE). A surprising finding in Study II was that instructional support had a different effect in the combination environment than in the simulation environment. In the combination environment explicit instruction (CE) did not seem to elicit much additional gain for students’ understanding of electric circuits compared to implicit instruction (CI). Instead, explicit instruction slowed down the inquiry process substantially in the combination environment. Study III analyzed from video data learning processes of those 50 students that participated in experiment II (cf. Study II above). The focus was on three specific learning processes: cognitive conflicts, self-explanations, and analogical encodings. The aim of the study was to find out possible explanations for the success of the combination condition in Experiments I and II. The video data provided clear evidence about the benefits of studying with the real and virtual circuits simultaneously (the combination conditions). Mostly the representations complemented each other, that is, one representation helped students to interpret and understand the outcomes they received from the other representation. However, there were also instances in which analogical encoding took place, that is, situations in which the slightly discrepant results between the representations ‘forced’ students to focus on those features that could be generalised across the two representations. No statistical differences were found in the amount of experienced cognitive conflicts and self-explanations between simulation and combination conditions, though in self-explanations there was a nascent trend in favour of the combination. There was also a clear tendency suggesting that explicit guidance increased the amount of self-explanations. Overall, the amount of cognitive conflicts and self-explanations was very low. The aim of the Study IV was twofold: the main aim was to provide an aggregated overview of the learning outcomes of experiments I and II; the secondary aim was to explore the relationship between the learning environments and students’ prior domain knowledge (low and high) in the experiments. Aggregated results of experiments I & II showed that on average, 91% of the students in the combination environment scored above the average of the laboratory environment, and 76% of them scored also above the average of the simulation environment. Seventy percent of the students in the simulation environment scored above the average of the laboratory environment. The results further showed that overall students seemed to benefit from combining simulations and laboratories regardless of their level of prior knowledge, that is, students with either low or high prior knowledge who studied circuits in the combination environment outperformed their counterparts who studied in the laboratory or simulation environment alone. The effect seemed to be slightly bigger among the students with low prior knowledge. However, more detailed inspection of the results showed that there were considerable differences between the experiments regarding how students with low and high prior knowledge benefitted from the combination: in Experiment I, especially students with low prior knowledge benefitted from the combination as compared to those students that used only the simulation, whereas in Experiment II, only students with high prior knowledge seemed to benefit from the combination relative to the simulation group. Regarding the differences between simulation and laboratory groups, the benefits of using a simulation seemed to be slightly higher among students with high prior knowledge. The results of the four empirical studies support the hypothesis concerning the benefits of using simulation along with laboratory activities to promote students’ conceptual understanding of electricity. It can be concluded that when teaching students about electricity, the students can gain better understanding when they have an opportunity to use the simulation and the real circuits in parallel than if they have only the real circuits or only a computer simulation available, even when the use of the simulation is supported with the explicit instruction. The outcomes of the empirical studies can be considered as the first unambiguous evidence on the (additional) benefits of combining laboratory and simulation activities in science education as compared to learning with laboratories and simulations alone.
Resumo:
The aim of this thesis is to examine whether the pricing anomalies exists in the Finnish stock markets by comparing the performance of quantile portfolios that are formed on the basis of either individual valuation ratios, composite value measures or combined value and momentum indicators. All the research papers included in the thesis show evidence of value anomalies in the Finnish stock markets. In the first paper, the sample of stocks over the 1991-2006 period is divided into quintile portfolios based on four individual valuation ratios (i.e., E/P, EBITDA/EV, B/P, and S/P) and three hybrids of them (i.e. composite value measures). The results show the superiority of composite value measures as selection criterion for value stocks, particularly when EBITDA/EV is employed as earnings multiple. The main focus of the second paper is on the impact of the holding period length on performance of value strategies. As an extension to the first paper, two more individual ratios (i.e. CF/P and D/P) are included in the comparative analysis. The sample of stocks over 1993- 2008 period is divided into tercile portfolios based on six individual valuation ratios and three hybrids of them. The use of either dividend yield criterion or one of three composite value measures being examined results in best value portfolio performance according to all performance metrics used. Parallel to the findings of many international studies, our results from performance comparisons indicate that for the sample data employed, the yearly reformation of portfolios is not necessarily optimal in order to maximally gain from the value premium. Instead, the value investor may extend his holding period up to 5 years without any decrease in long-term portfolio performance. The same holds also for the results of the third paper that examines the applicability of data envelopment analysis (DEA) method in discriminating the undervalued stocks from overvalued ones. The fourth paper examines the added value of combining price momentum with various value strategies. Taking account of the price momentum improves the performance of value portfolios in most cases. The performance improvement is greatest for value portfolios that are formed on the basis of the 3-composite value measure which consists of D/P, B/P and EBITDA/EV ratios. The risk-adjusted performance can be enhanced further by following 130/30 long-short strategy in which the long position of value winner stocks is leveraged by 30 percentages while simultaneously selling short glamour loser stocks by the same amount. Average return of the long-short position proved to be more than double stock market average coupled with the volatility decrease. The fifth paper offers a new approach to combine value and momentum indicators into a single portfolio-formation criterion using different variants of DEA models. The results throughout the 1994-2010 sample period shows that the top-tercile portfolios outperform both the market portfolio and the corresponding bottom-tercile portfolios. In addition, the middle-tercile portfolios also outperform the comparable bottom-tercile portfolios when DEA models are used as a basis for stock classification criteria. To my knowledge, such strong performance differences have not been reported in earlier peer-reviewed studies that have employed the comparable quantile approach of dividing stocks into portfolios. Consistently with the previous literature, the division of the full sample period into bullish and bearish periods reveals that the top-quantile DEA portfolios lose far less of their value during the bearish conditions than do the corresponding bottom portfolios. The sixth paper extends the sample period employed in the fourth paper by one year (i.e. 1993- 2009) covering also the first years of the recent financial crisis. It contributes to the fourth paper by examining the impact of the stock market conditions on the main results. Consistently with the fifth paper, value portfolios lose much less of their value during bearish conditions than do stocks on average. The inclusion of a momentum criterion somewhat adds value to an investor during bullish conditions, but this added value turns to negative during bearish conditions. During bear market periods some of the value loser portfolios perform even better than their value winner counterparts. Furthermore, the results show that the recent financial crisis has reduced the added value of using combinations of momentum and value indicators as portfolio formation criteria. However, since the stock markets have historically been bullish more often than bearish, the combination of the value and momentum criteria has paid off to the investor despite the fact that its added value during bearish periods is negative, on an average.
Resumo:
My dissertation is an interdisciplinary study of the relationship between the Swiss peasants and nobles in Friedrich Schiller’s play Wilhelm Tell (1804). Changes to this relationship are of particular interest. Communication in the play is examined via a micro-analysis based on Penelope Brown’s and Stephen C. Levinson’s theoretical framework Politeness: Some universals in language usage. (1978, 1987). Brown and Levinson distinguish between positivepoliteness and negative-politeness strategies and their distinction is useful for my argument, since they claim that the use of positive-politeness strategies reflects the speaker’s intention to minimize the distance between the interlocutors (Brown and Levinson 1987: 103). Negative-politeness strategies, by contrast, result in social distancing (Brown and Levinson 1987: 130). In accordance with Brown’s and Levinson’s theory, it can be argued that the distribution of positive-politeness and negative-politeness strategies reflects changes in the distance between the fictional interlocutors as representatives of their social classes in Wilhelm Tell. The analysis of the communication in the play highlights that existing conflicts within the social groups are resolved and replaced with solidarity (cf. ‘Claim ’common ground’ and ‘Claim in-group membership with H’) before the peasants and noblemen appear on stage simultaneously in III, 3. In the scene in question, Geßler forces Tell to shoot the apple off his son’s head. Although both nobles and peasants are present, they do not communicate with each other. Thus, communication between the social classes occurs for the first time in IV, 2. This scene is crucial with regard to the changes in the relationship between the social classes in the play. The younger generation, with Rudenz as a representative of the nobility and Melchthal as a representative of the peasants, break with the prevailing conventions and initiate a new type of cooperation based on mutual helping and equality in the right and the duty to protect the country from the violent oppressors representing Habsburg (cf. ‘Convey that S and H are cooperators’, ‘Claim reflexivity’ and ‘Claim reciprocity’). The linguistic analysis reveals the crucial role of the Swiss nobility in the development of the social utopia, as well as the non-contribution of Wilhelm Tell. In fact, Tell never communicates with the Swiss noblemen. The role of the nobility and the role of Wilhelm Tell are further investigated in a comparison between Schiller’s Wilhelm Tell and four of Schiller’s historical sources. These sources, which contain earlier, non-dramatic versions of the establishment of the Swiss Confederation, are the following: Kronica von der loblichen Eydtgnoschaft compiled by Petermann Etterlin (1507), Gemeiner loblicher Eydgnoschafft Stetten Landen vnd Völckeren Chronik wirdiger thaaten beschreybung (1548) written by Johann Stumpf, Chronicon Helveticum of Aegidius Tschudi (the publication of Iselin from 1734 and 1736) and Johannes von Müller’s Geschichten schweizerischer Eidgenossenschaft (1786). Thecomparison sheds light on the fact that both Tschudi and von Müller emphasize unity among the Swiss and cooperation in their attempt to defeat the enemy. However, Schiller has reinforced the role of the nobility in the cooperation. In addition, the comparison between Schiller’s play and the historical sources reveals profound differences with regard to the role of Wilhelm Tell. In all of Schiller’s sources, Tell is present at Rütli, whereas he is absent from Rütli in Schiller’s play. In the play in general, Tell is conspicuously separated from the other peasants. Explanations of my linguistic results, which correspond to the above mentioned differences between the roles of the figures in Wilhelm Tell and the depictions in Schiller’s sources, are found by comparing the path of Schiller’s Swiss towards an egalitarian perspective with the kind of social evolution depicted by the German philosopher Johann Benjamin Erhard in his essay Über das Recht des Volks zu einer Revolution (1795). Aiming at considering Schiller’s social utopia within the larger cultural framework of the German response to the French Revolution, the comparison suggests that both authors depict the need for social change in terms of a change in social hierarchies (Erhard 1970: 95-96, cf. Foi 2005: 225). Erhard’s essay thus helps explain the political intention of Schiller’s play to keep the ideals of the French Revolution as crucial aims but profoundly change the means towards freedom and equality. In his attempt to claim the political resistance of the nobles and peasants as just, however, Schiller sacrificed the figure of Wilhelm Tell. Guilty of the murder of Geßler, Tell was no longer suitable for the righteous revolution imagined by Schiller (cf. Bloch 2008: 215 and Schulz 2005: 228). This explains Tell’s absence in the Rütli scene, his isolation in the plot, as well as his non-contribution to the social utopia. Together, the linguistic analysis and contextualisation of Schiller’s play support my hypothesis that Wilhelm Tell describes a process of change in the relationship between peasants and nobles. The interdisciplinary approach to the topic proved to be fruitful for all areas of the research involved.
Resumo:
The present investigation looks into the attitudes toward death in Paul’s authentic letters, and puts them in relation to modern theories of psychological coping. Drawing on psychologically-oriented hermeneutic theory, and theories about psychological coping in particular, I argue that each case of psychological coping must be understood in its historical situation as strategies emanating from a specific person’s subjective appraisal (cf. Pargament, Lazarus and Folkman). Paul’s letters frequently refer to persecution and violent death. To aid in psychological coping is often integral to the purpose of the letters, which makes the perspective of psychological coping akin to their genre. In the course of a tentatively assumed chronological order of 1 Thessalonians, Galatians, 1 Corinthians, 2 Corinthians, Romans, Philippians, and Philemon, Paul moves from the perception of Jesus dying for the faithful to the understanding of dying with Jesus. His coping strategies concerning death are gradually transformed from conservative and deferring coping styles, to a more self-directing coping style, to collaborative and transformative coping styles, and finally to a new sense of deferring coping style in prison. The last case of deferring coping carries the traits of generosity and flexibility even in the face of death, which is in contrast to his previous letters. Through his correspondence, we see Paul’s attitude toward death transformed from denial to reaction, to processing, to acceptance (cf. Lindemann, Kübler-Ross, Bowlby, Parkes, among others). His strategies also shift in accordance with these understandings. Denial is accompanied by diversion, threat by aggression, processing by rumination, and acceptance by joy. The study shows the hermeneutic benefits of reading Paul’s letters as the rhetorically framed expressions of a person in a particular historical situation. The letters open small windows through which we can glimpse the coping process of a person of antiquity. In adopting the method of psychological exegesis, the study shows that the variety of attitudes toward death in Paul’s letters makes sense from the perspective of psychological coping. The psychological aspect of these letters is an underexamined richness that can extend into areas of contemporary individual and group identity, and from there to public policy and ethics.
Resumo:
A (mainly votive) missal consisting of seven distinct parts. Put together in several stages, somewhat haphazardly. Parts II and III are probably the oldest parts. The final stage in the composition of the book is probably the addition of part VII. Part II belongs in the same liturgical tradition as C.ö.IV.7 (Oripään Missale I), probably that of Diocese of Linköping. Part III, a votive missal, is an informal copy of a book that would most probably have been used close to a Swedish cathedral (Linköping?). How the present book found its way to Oripää chapel is not known.
Resumo:
Strenx® 960 MC is a direct quenched type of Ultra High Strength Steel (UHSS) with low carbon content. Although this material combines high strength and good ductility, it is highly sensitive towards fabrication processes. The presence of stress concentration due to structural discontinuity or notch will highlight the role of these fabrication effects on the deformation capacity of the material. Due to this, a series of tensile tests are done on both pure base material (BM) and when it has been subjected to Heat Input (HI) and Cold Forming (CF). The surface of the material was dressed by laser beam with a certain speed to study the effect of HI while the CF is done by bending the specimen to a certain angle prior to tensile test. The generated results illustrate the impact of these processes on the deformation capacity of the material, specially, when the material has HI experience due to welding or similar processes. In order to compare the results with those of numerical simulation, LS-DYNA explicit commercial package has been utilized. The generated results show an acceptable agreement between experimental and numerical simulation outcomes.
Resumo:
Attracting outside capital is a common problem for start-up companies. Capital markets define the funding options for companies and firms which suffer the most from these capital market imperfections are small start-up companies. Therefore it is important to study any new funding model which can offer a new solution to this inefficiency of capital markets. This study explains the traditional funding models for start-ups such as founders, friends & family, banks, business angels and venture capitalist. After giving background to traditional start-up funding this study delves into crowfunding (CF) and introduces it as a new funding method. The objective of the thesis is to answer one broad research question: Why and how should start-up companies use CF as an alternative funding method? To properly delve into this, this question has the following sub-questions: What kind of funding alternatives do start-up companies have? What are the pros and cons of CF compared to other funding options? How can start-ups benefit from CF? This study gives background on the rise of CF and the reasons why this new model is needed. Author will explain the different components of CF such as platforms, crowdfunders and projects. Also benefits and challenges of the crowdfunding model are investigated. As a new funding model CF has had to clear out many obstacles from its way. These are, for example, legal and regulatory issues as well education of crowd investors to understand this new investment option. . Start-up entrepreneurs can gain valuable insight from this study. The author has attempted to form best practices and guidelines of how to operate in the CF environment. This study was conducted by performing expert interviews, collecting data from previous studies and performing a content analysis of successful crowdfunding cases. Main findings from the study were that CF has huge potential in funding entrepreneurial projects. It is still a niche way for funding but growing rapidly. CF is earning its place among traditional funding options and has potential to fund projects which otherwise would struggle to find funding. With CF entrepreneur can tap into geographically diverse audience. It is a powerful validation tool for products and ideas and has the power to bring democratic elements to entrepreneurial funding.