Riskianalyysistäohjeelliseen panostussuunnitelmaan

Nykytekniikalla kyetään tehokkaaseen ja turvalliseen työn toteuttamiseen. Suorituksen aikaansaanti edellyttää ympäristön kartoittamista niin, että urakoitsija tuntee ne seikat, jotka ovat tarpeen, jotta työ voidaan suorittaa vaurioittamatta olevia rakennuksia ja aiheuttamatta asukkaille vaaratilanteita. Riskianalyysi tuo esille ne seikat, jotka on syytä tietää työn laskenta- ja suoritustilanteessa. On tunnettava käytettävät räjähdysaineet ja mitä tapahtuu räjähdysprosessissa. Prosessin ideaalimallin (harmoninen värähtely) pohjalta on kehitetty teorioita, joiden avulla kyetään pitämään suorituksen aiheuttama tärinätaso sellaisena, ettei ympäristössä olevia entisiä rakennuksia vaurioiteta eikä teknisestä suorituksesta aiheudu vaaratilanteita ihmisille. Riskianalyysi- ja rakennuskatselmustietojen perusteella mitoitetaan käytettävä panos sellaiseksi, että asetetut turvallisuusvaateet tulevat täytetyiksi. Työn suorituksen onnistumiseksilaaditaan ohjeellinen panostussuunnitelma, jossa käytettävä panoskoko ilmoitetaan etäisyyden funktiona varottavasta kohteesta. Samassa esityksessä käy selville rakenteille sallittu tärinäaallon heilahdusnopeus mm/s:ssa. Muuttunut etäisyys ja se tosiasia, etteivät räjäytyskentät ole tärinätasoltaan identtisiä, vaikka etäisyys ja panoskoko ovat samat, tarvitsee muutostentekoa varten teoreettistasoisen esityksen tuekseen. Tuo tuki on ohjeellinen panostussuunnitelma. Muutosten perusteena ei ole mutu - menettely, vaan teoreettinen, yleisesti hyväksyttyihin menettelytapoihin perustuva malli.

Task Support in Scenario Process: Case LUT 2016

This thesis attempts to find whether scenario planning supports the organizational strategy as a method for addressing uncertainty. The main issues are why, what and how scenario planning fits in organizational strategy and how the process could be supported to make it more effective. The study follows the constructive approach. It starts with examination of competitive advantage and the way that an organization develops strategy and how it addresses the uncertainty in its operational environment. Based on the conducted literature review, scenario methods would seem to provide versatile platform for addressing future uncertainties. The construction is formed by examining the scenario methods and presenting suitable support methods, which results in forming of the theoretical proposition for supporter scenario process. The theoretical framework is tested in laboratory conditions, and the results from the test sessions are used a basis for scenario stories. The process of forming the scenarios and the results are illustrated and presented for scrutiny

IEA Bioenergy Task 40 “Sustainable International Bioenergy Trade: Securing supply and demand” Country report of Finland 2008

This study considered the current situation of biofuels markets in Finland. The fact that industry consumes more than half of the total primary energy, widely applied combined heat and power production and a high share of solid biomass fuels in the total energy consumption are specific to the Finnish energy system. Wood is the most important source of bioenergy in Finland, representing 21% of the total energy consumption in 2006. Almost 80% of the wood-based energy is recovered from industrial by-products and residues. Finland has commitment itself to maintaining its greenhouse gas emissions at the 1990 level, at the highest, during the period 2008–2012. The energy and climate policy carried out in recent years has been based on the National Energy and Climate introduced in 2005. The Finnish energy policy aims to achieve the target, and a variety of measures are taken to promote the use of renewable energy sources and especially wood fuels. In 2007, the government started to prepare a new long-term (up to the year 2050) climate and energy strategy that will meet EU’s new targets for the reduction of green house gas emissions and the promotion of renewable energy sources. The new strategy will be introduced during 2008. The international biofuels trade has a substantial importance for the utilisation of bioenergy in Finland. In 2006, the total international trading of solid and liquid biofuels was approximately 64 PJ of which import was 61 PJ. Most of the import is indirect and takes place within the forest industry’s raw wood imports. In 2006, as much as 24% of wood energy was based on foreignorigin wood. Wood pellets and tall oil form the majority of export streams of biofuels. The indirect import of wood fuels increased almost 10% in 2004–2006, while the direct trade of solid and liquid biofuels has been almost constant.

Äitiys kulttuurisina odotuksina

Tutkimuksen kohteena ovat äitiydelle tuotetut kulttuuriset odotukset, joita tarkastellaan kahdella yhteiskunnallisella keskustelufoorumilla. Tutkimuksessa tarkastellaan yhtäältä lastensuojelun perhetyössä toimivien ammattilaisten ja toisaalta median puhetta äitiydestä. Tutkimuksen tavoitteena on tehdä näkyväksi vaihtoehtoisia tapoja konstruoida äitiyttä hyvänä tai riittämättömänä sekä haastaa pohtimaan erilaisten tulkintojen perusteita ja seurauksia lastensuojelutyössä. Kulttuuriset, äitiyttä koskevat odotukset vaikuttavat myös siihen, miten äitiys henkilökohtaisella tasolla koetaan. Äitiyden kulttuurista määrittelyä analysoidaan kahdesta tekstiaineistosta. Yhtenä aineistona ovat Stakesissa vuonna 1999 toteutetun Perhetyöprojektin yhteydessä kerätyt, lastensuojelussa toimivien perhetyöammattilaisten ryhmäkeskustelut. Toisena aineistona on projektin ajankohtana ilmestyneistä suomalaisista naisten- ja perhelehdistä (Kotiliesi, Anna, Kaksplus) kerätyt äitien haastattelut. Tutkimuksessa kysytään 1) Mihin ammattilaisten äitejä koskeva huolipuhe kiinnittyy ja millaisia kulttuurisia äitiyden odotuksia se konstruoi? 2) Millaisia äitiyden odotuksia median äitihaastattelut konstruoivat? 3) Millaisen äitiyden odotushorisontin nämä puhekäytännöt yhdessä tuottavat? Analyysin teoreettis-metodologisina kulmakivinä ovat sosiaalinen konstruktionismi ja feministinen tietokäsitys. Analyysimenetelmänä on laadullinen, aineistojen ehdoilla etenevä, feministisesti ja kriittisesti sävyttynyt lukutapa, joka hyödyntää teemoittelun, diskurssianalyysin ja feministisen metodologian ideoita ja käsitteitä. Analysoitavana olevissa keskusteluissa äitiyttä konstruoidaan lapsen tarpeiden (ammattilaiset) ja naisen tarpeiden (media) näkökulmista. Ammattilaiset puhuvat tilanteista, joissa äitien toiminta rikkoo kulttuurista hyvän äidin kuvaa, vaarantaa lapsen hyvinvointia ja äitiyteen joudutaan puuttumaan ammatillisesti. Ammattilaisten tulkinnat kuvaavat taitavaa lapsen edun näkökulmasta tehtyä arviointia, jonka kiintopisteenä ovat äidit yksilöllisine ominaisuuksineen ja piirteineen. Ammatillisen huolipuheen keskiössä ovat äidin vuorovaikutussuhteet sekä äidin tunteet, käyttäytyminen ja asenteet. Riittävää äitiyttä konstruoi kodin luominen, kiintymyssuhteen rakentaminen ja lapsen ensisijaiseksi asettaminen. Sen sijaan vaikuttaa siltä, ettei äitiyden arviointia juurikaan tehdä suhteessa äidin muihin identiteetteihin tai äitiyden toteuttamisen kontekstiin. Paikoin ammattilaisten tulkinnat heijastavat myös stereotyyppisiä ja idealistisia odotuksia, joita vasten äitiyttä arvioidaan. Tällaiset piirteet voivat kertoa siitä, että äitien avuntarpeet jäävät lastensuojelutyössä kohtaamatta ja ymmärtämättä. Mediapuhe äitiydestä käydään naiseuden ja äitiyden mallien antamisen kontekstissa. Puheen keskiössä ovat mediajulkisuuteen päässeiden naisten äidiksi tuloon ja äitiyden toteuttamiseen liittyvät valinnat ja käyttäytyminen. Mediapuhe on puhetta kulttuuristen ja ammatillisten äitiyden odotusten rikkomisesta, uudelleen tulkinnasta ja niiden muovaamisesta itselle sopiviksi. Mediapuheessa hyvää äitiyttä konstruoi äidin itsenäisyys ja oma aika, sosiaalisen elämän rikkaus, ammatillinen identiteetti ja persoonalliset valinnat. Aineistojen kautta rakentuu moninaisten ja ristiriitaisten, äitejä eri suuntaan vetävien kulttuuristen odotusten kirjo. Odotukset jäsentyvät neljälle ulottuvuudelle: 1) lapselle omistautuva – itseään toteuttava, 2) emotionaalinen side – rationaalinen tehtävä, 3) odotuksia toteuttava – omaehtoinen, 4) itsenäinen - äitiyttä jakava. Äitiyden toteuttaminen kulttuurisesti ”oikein” on näiden odotusten välissä tasapainoilua. Ulottuvuuksien kautta esille tulevat kaksoisviestit voivat heikentää äitien itsetuntoa, tuottaa riittämättömyyden tunteita tai yllyttää suorittamaan äitiyttä. Myös äitiyden ammatillinen tukeminen edellyttää tasapainoilua, jottei äitejä idealisoida tai syyllistetä kulttuurisia odotuksia vasten.

Highly functional binding surface for miniaturised solid-phase immunoassays. - A spot story -

Several bioaffinity assays are based on the detection of an analyte which is bound on a solid substrate via biochemical interaction. These so called solid phase assays are based on the adhesion of the primary binding partner on a solid surface, which then binds the analyte to be detected. In this thesis work a novel solid phase based assay technology, known as spot technology, was developed. The spot technology is based on combination of high-capacity solid phases, concentrated in a spot format, utilising modified streptavidin molecules and recombinant antibody fragments. The reduction of the solid phase binding surface to a size of a spot enabled denser binding of the target molecules, providing improved signal intensities and signal-to-background ratio when applied in different solid phase immunoassays. Streptavidin-biotin interactions are commonly utilised in numerous different bioaffinity assays and the ultimate nature of streptavidin to bind biotin is among the strongest non-covalent interaction reported between two biomolecules. In this study native core streptavidin was chemically modified to provide polymerised streptavidin molecules with altered adsorption properties. These streptavidin conjugates, when coated onto polystyrene surface, provided enhanced biotin binding capacity and surface stability when compared to a reference coating constructed with native streptavidin. Furthermore, the combination of chemically modified streptavidin, sitespecifically biotinylated antibody fragments and the spot coating technology provided highly dense solid phase coating with improved binding properties. The performance of the spot assay technology was further demonstrated in different immunoassay configurations. Human thyroid stimulating hormone (TSH) and human cardiac troponin I (cTnI) were used as model analytes to show the applicability of the highly sensitive spot-based solid-phase immunoassay for detection of very low levels of analytes. It was demonstrated that the spot technology provided an assay concept with enhanced sensitivity and short turn-around times, characteristics that are highly suitable for point-of-care applications.

Market of biomass fuels in Finland : IEA Bioenergy Task 40 and EUBIONET III - Country report of Finland 2009

This study considered the current situation of solid and liquid biomass fuels in Finland. The fact that industry consumes more than half of the total primary energy, widely applied combined heat and power production and a high share of solid biomass fuels in the total energy consumption are specific to the Finnish energy system. Wood is the most important source of bioenergy in Finland, representing 20% of the total energy consumption in 2007. Almost 80% of the woodbased energy is recovered from industrial by-products and residues. As a member of the European Union, Finland has committed itself to the Union’s climate and energy targets, such as reducing its overall emissions of green house gases to at least 20% below 1990 levels by 2020, and increasing the share of renewable energy in the gross final consumption. The renewable energy target approved for Finland is 38%. The present National Climate and Energy Strategy was introduced in November 2008. The strategy covers climate and energy policy measures up to 2020, and in brief thereafter, up to 2050. In recent years, the actual emissions have exceeded the Kyoto commitment and the trend of emissions is on the increase. In 2007, the share of renewable energy in the gross final energy consumption was approximately 25% (360 PJ). Without new energy policy measures, the final consumption of renewable energy would increase to 380 PJ, which would be approximately only 31% of the final energy consumption. In addition, green house gas emissions would exceed the 1990 levels by 20%. Meeting the targets will need the adoption of more active energy policy measures in coming years. The international trade of biomass fuels has a substantial importance for the utilisation of bioenergy in Finland. In 2007, the total international trading of solid and liquid biomass fuels was approximately 77 PJ, of which import was 62 PJ. Most of the import is indirect and takes place within the forest industry’s raw wood imports. In 2007, as much as 21% of wood energy was based on foreign-origin wood. Wood pellets and tall oil form the majority of export streams of biomass fuels. The indirect import of wood fuels peaked in 2006 to 61 PJ. The foreseeable decline in raw wood import to Finland will decrease the indirect import of wood fuels. In 2004– 2007, the direct trade of solid and liquid biomass fuels has been on a moderate growth path. In 2007, the import of palm oil and export of bio-diesel emerged, as a large, 170 000 t/yr biodiesel plant came into operation in Porvoo.

Short story

Digitoitu 14. 1. 2009

”They Call it Christmas”. An Ethnological Analysis of Alienation in Tove Jansson’s Short Story The Fir Tree

Artikel i tidskrift med referee-praxis

Social tagging within task management

Social tagging evolved in response to a need to tag heterogeneous objects, the automated tagging of which is usually not feasible by current technological means. Social tagging can be used for more flexible competence management within organizations. The profiles of employees can be built in the form of groups of tags, as employees tag each other, based on their familiarity of each other’s expertise. This can serve as a replacement for the more traditional competence management approaches, which usually become outdated due to social and organizational hurdles, and obsolete data. These limitations can be overcome by people tagging, as the information revealed by such tags is usually based on most recent employee interaction and knowledge. Task management as part of personal information management aims at the support of users’ individual task handling. This can include collaborating with other individuals, sharing one’s knowledge, both functional and process-related, and distributing documents and web resources. In this context, Task patterns can be used as templates that collect information and experience around tasks associated to it during run time, facilitating agility. The effective collaboration among contributors necessitates the means to find the appropriate individuals to work with on the task, and this can be made possible by using social tagging to describe individual competencies. The goal of this study is to support finding and tagging people within task management, through the effective exploitation of the work/task context. This involves the utilization of knowledge of the workers’ expertise, nature of the task/task pattern and information available from the documents and web resources attached to the task. Vice versa, task management provides an excellent environment for social tagging due to the task context that already provides suitable tags. The study also aims at assisting users of the task management solution with the collaborative construction of light-weight ontology by inferring semantic relations between tags. The thesis project aims at an implementation of people finding & tagging within the java application for task management that consumes web services, which provide the required ontology for the organization.

Repair of segmental bone defects with fiber-reinforced composite: a study of material development and an animal model on rabbits

The Repair of segmental defects in load-bearing long bones is a challenging task because of the diversity of the load affecting the area; axial, bending, shearing and torsional forces all come together to test the stability/integrity of the bone. The natural biomechanical requirements for bone restorative materials include strength to withstand heavy loads, and adaptivity to conform into a biological environment without disturbing or damaging it. Fiber-reinforced composite (FRC) materials have shown promise, as metals and ceramics have been too rigid, and polymers alone are lacking in strength which is needed for restoration. The versatility of the fiber-reinforced composites also allows tailoring of the composite to meet the multitude of bone properties in the skeleton. The attachment and incorporation of a bone substitute to bone has been advanced by different surface modification methods. Most often this is achieved by the creation of surface texture, which allows bone growth, onto the substitute, creating a mechanical interlocking. Another method is to alter the chemical properties of the surface to create bonding with the bone – for example with a hydroxyapatite (HA) or a bioactive glass (BG) coating. A novel fiber-reinforced composite implant material with a porous surface was developed for bone substitution purposes in load-bearing applications. The material’s biomechanical properties were tailored with unidirectional fiber reinforcement to match the strength of cortical bone. To advance bone growth onto the material, an optimal surface porosity was created by a dissolution process, and an addition of bioactive glass to the material was explored. The effects of dissolution and orientation of the fiber reinforcement were also evaluated for bone-bonding purposes. The Biological response to the implant material was evaluated in a cell culture study to assure the safety of the materials combined. To test the material’s properties in a clinical setting, an animal model was used. A critical-size bone defect in a rabbit’s tibia was used to test the material in a load-bearing application, with short- and long-term follow-up, and a histological evaluation of the incorporation to the host bone. The biomechanical results of the study showed that the material is durable and the tailoring of the properties can be reproduced reliably. The Biological response - ex vivo - to the created surface structure favours the attachment and growth of bone cells, with the additional benefit of bioactive glass appearing on the surface. No toxic reactions to possible agents leaching from the material could be detected in the cell culture study when compared to a nontoxic control material. The mechanical interlocking was enhanced - as expected - with the porosity, whereas the reinforcing fibers protruding from the surface of the implant gave additional strength when tested in a bone-bonding model. Animal experiments verified that the material is capable of withstanding load-bearing conditions in prolonged use without breaking of the material or creating stress shielding effects to the host bone. A Histological examination verified the enhanced incorporation to host bone with an abundance of bone growth onto and over the material. This was achieved with minimal tissue reactions to a foreign body. An FRC implant with surface porosity displays potential in the field of reconstructive surgery, especially regarding large bone defects with high demands on strength and shape retention in load-bearing areas or flat bones such as facial / cranial bones. The benefits of modifying the strength of the material and adjusting the surface properties with fiber reinforcement and bone-bonding additives to meet the requirements of different bone qualities are still to be fully discovered.