Kahlaajien elintila kutistuu

Kirjallisuusarvostelu

Integrating CRIS and repository – an overview of the situation in Finland and in three other Nordic countries

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Stretching the drum skin : an analysis of power relations in leadership and succession in the Evangelical Lutheran church in Tanzania-Northern diocese 1942– 1993

-

An Evaluation of the Paper Profile - a comparative assessment of the applicability of an emerging environmental communication tool in pulp and paper industry

Diplomityön tavoitteena oli arvioida uutta sellu-, paperi- ja kartonkiteollisuuden Paper Profile -ympäristötuoteselostetta. Paper Profilen tarkoituksena on tarjota paperiteollisuuden asiakkaille ja muille kiinnostuneilla sidosryhmille yhtenäistä ympäristöinformaatiota koskien paperituotteiden koostumusta ja tuotteiden tärkeimpiä ympäristöparametrejä. Työn tärkein tavoite oli arvioida kriittisesti Paper Profilea ja verrata konseptia ISO:n, Kansainvälisen stardardisoimisliiton tuoteselosteeseen sekä löytää konseptien yhtäläisyydet ja erot. Tärkein tehtävä oli tunnistaa ne avaintekijät, joiden avulla Paper Profile -tuoteselostetta voitaisiin pitää yhtenevänä ISO/TR 14025 teknisen raportin kanssa. Lisäksi Paper Profile -tuoteselosteen mahdolliset kehittämistarpeet arvioitiin ISO-tuoteselosteen näkökulmasta. Työn toinen tavoite oli kerätä ja analysoida uuteen tuoteselosteeseen liittyvä asiakaspalaute ja verrata sitä Stora Enson tehtaiden ympäristöpäälliköiden antamiin Paper Profilea koskeviin kommentteihin. Työn tuloksena huomattiin, että Paper Profile -konsepti sellaisenaan ei ole kovin informatiivinen vaan tuoteseloste jättää monia ympäristökysymyksiä avoimeksi. Siitä huolimatta Paper Profile tarjoaa riittävän taustan eri paperituotteiden ympäristökuormitusten keskinäiselle vertailuille. Konseptin viestinnällinen näkökulma paranisi huomattavasti, jos tuoteselosteeseen lisättäisiin kolmannen osapuolen verifiointi. Lisäksi referenssiarvot kertoisivat asiakkaille paremmin esitettyjen parametrien taustoista. Stora Enson tehtaiden ympäristöpäälliköiden, samoin kuin asiakkaidenkin mielestä Paper Profile on yleisesti ottaen potentiaalinen ympäristöviestinnän työkalu, mutta silti konseptiin ehdotettiin joitakin pieniä muutoksia. Avoinna olevat metsäsertifiointikysymykset ja niiden puutteellinen tiedottaminen tuoteselosteessa puhututtivat sekä tehtaiden henkilöstöä että yritysasiakkaita.

Genetic diversity and phenotypic variability of phytoplankton populations in the Baltic Sea

En av naturens mest grundläggande aspekter är den enorma mängd av variation som existerar mellan arter. Denna variation har lett oss till att klassificera olika organismer på basis av morfologiska skillnader och på senare tid till att jämföra genetiska skillnader på individens nivå. Den marina kiselalgen Skeletonema marinoi är en av de vanligaste växtplanktonarter i Östersjön under vårblomningen och anses viktig för den årliga produktionen. En av mina främsta målsättningar var att beskriva den intra-specifika diversiteten hos denna art längs med miljögradienter i Östersjön. Ett annat mål var att klargöra de faktorer som eventuellt är involverade i konfigurationen av genetisk diversitet och differentiering. Med hjälp av genetiska markörer visade jag att den genetiska diversiteten hos S. marinoi populationer i Östersjön är lägre jämfört med populationer i östra delen av Nordsjön. Arten är genetiskt uppdelad så att en utpräglad population förekommer i Östersjön och en annan, genetiskt åtskild population förekommer norr om de Danska sunden. Resultaten visar att de genetiskt åtskilda populationerna är anpassade till lokala salinitetsförhållanden. Genflödet mellan populationerna korrelerade kraftigt med havströmmar i området. Mina studier avslöjade även omfattande variation av fenotypiska, ekologiskt vikitga särdrag hos olika kloner. Djurplankton som äter kiselalger kunde modifiera den klonala mångfalden av fenotypiskt variabla S. marinoi populationer. En ökad klonal mångfald ledde till högre prestationsförmåga i fråga om primär produktion och stabiliserade ekofysiologiska funktioner. Som visas i denna avhandling består en art allt som oftast av åtskilliga genetiska varianter med fenotypiska skillnader. Kunskap om sådana intra-specifika skillnader är en förutsättning för att vi skall kunna förstå var och varför arter förekommer. Denna kunskap utgör även en grund för prognoser som siktar på att förutspå huruvida arter kan anpassa sig till framtida miljöförhållanden. ------------------------------------------------------ Suunnaton määrä variaatioita eliölajien välillä on perustavanlaatuinen ominaisuus luonnossa. Perinteisesti tätä monimuotoisuutta on käytetty organismien luokittelemiseen eri lajeihin niiden morfologisten eroavaisuuksien perusteella. Hiljattain myös geneettisten erojen huomioimista yksilötasolla on hyödynnetty lajien luokittelemisessa. Merialueilla esiintyvä piilevä, Skeletonema marinoi on yksi Itämeren tavallisimmista kasviplanktonlajeista kevätkukinnan aikana. Tavoitteenani oli selventää geneettistä ja fenotyyppistä monimuotoisuutta pitkin Itämeren ympäristögradienttejä. Geneettisen monimuotoisuuteen ja erkaantumiseen vaikuttavien tekijöiden selvittäminen oli tärkeä aspekti väitöstutkimuksessani. Geneettisiä markkereita käyttämällä pystyin toteamaan, että S. marinoi levän geneettinen monimuotoisuus on Itämeressä merkittävästi alhaisempi kuin läheisessä Pohjanmeren itäosassa. Tutkittu laji jakautuu geneettisesti yhteen erilliseen populaatioon Itämeressä ja toiseen selvästi erottuvaan populaatioon Tanskan salmien pohjoispuolella. Kokeellisten tulosten perusteella nämä geneettisesti erilaistuneet populaatiot ovat kumpikin sopeutuneet paikalliseen veden suolapitoisuuteen. Populaatioiden välisen geenivirran ja merivirtojen luoman yhteyden välillä havaittiin vahva korrelaatio. Tutkimukseni paljastivat myös laajaa vaihtelua Skeletonema-kloonien ekologisesti tärkeissä ominaisuuksissa. Kokeellisten tutkimusteni perusteella laiduntajat pystyivät muuttamaan geneettisten kloonien lukumäärää monimuotoisissa S. marinoi populaatioissa. Lisääntynyt kloonien lukumäärä paransi perustuotantokykyä ja vakautti ekofysiologisia toimintoja. Kuten tässä väitöstutkimuksessa osoitetaan, lajit koostuvat useimmiten lukuisista geneettisistä muunnelmista, jotka eroavat usein fenotyypeiltään. Ymmärtääksemme missä tietyt lajit esiintyvät ja miksi, tarvitsemme tietoa lajien sisäisistä vaihteluista. Tämä tieto on tarpeellista, jotta voimme ennustaa lajien sopeutumista tuleviin ympäristönmuutoksiin.

Imaging and Characterisation of Dirt Particles in Pulp and Paper

Dirt counting and dirt particle characterisation of pulp samples is an important part of quality control in pulp and paper production. The need for an automatic image analysis system to consider dirt particle characterisation in various pulp samples is also very critical. However, existent image analysis systems utilise a single threshold to segment the dirt particles in different pulp samples. This limits their precision. Based on evidence, designing an automatic image analysis system that could overcome this deficiency is very useful. In this study, the developed Niblack thresholding method is proposed. The method defines the threshold based on the number of segmented particles. In addition, the Kittler thresholding is utilised. Both of these thresholding methods can determine the dirt count of the different pulp samples accurately as compared to visual inspection and the Digital Optical Measuring and Analysis System (DOMAS). In addition, the minimum resolution needed for acquiring a scanner image is defined. By considering the variation in dirt particle features, the curl shows acceptable difference to discriminate the bark and the fibre bundles in different pulp samples. Three classifiers, called k-Nearest Neighbour, Linear Discriminant Analysis and Multi-layer Perceptron are utilised to categorize the dirt particles. Linear Discriminant Analysis and Multi-layer Perceptron are the most accurate in classifying the segmented dirt particles by the Kittler thresholding with morphological processing. The result shows that the dirt particles are successfully categorized for bark and for fibre bundles.

Regulation of lymphocyte response in vitro and in vivo

CD4+ T helper (Th) cells have an important role in the defence against diverse pathogens. Th cells can differentiate into several functionally distinct subtypes including Th1 and Th2 cells. Th1 cells are important for eradicating intracellular pathogens, whereas Th2 cells pro¬tect our body against extracellular parasites. However if uncontrolled, Th cells can mediate immunopathology such as asthma or allergies, but inappropriate Th response can also lead to autoimmune diseases such as multiple sclerosis or type 1 diabetes. Deeper knowledge of the regulation of the lymphocyte response both in vitro and in vivo is important for un¬derstanding the pathogenesis of immune-mediated diseases and microbe-host interactions. In the work presented in this thesis, the first goal was to elucidate the role of novel factors, PIM kinases and c-FLIP in the regulation of human Th cell differentiation. The oncogenic serine-threonine kinases of the PIM family were shown to be preferentially expressed in Th1 cells and in addition, by using RNA interference, they were also shown to be positive regulators of Th1 differentiation. The PIM depletion experiments suggest that PIM kinases promote the expression of the hallmark cytokine of Th1 cells, IFNγ, and influence the IL12/STAT4 pathway during the early Th1 cell differentiation. In addition to cytokine and T cell receptor (TCR) induced pathways, caspase activity has been shown to regulate Th cell proliferation. In the work presented in this thesis, the two isoforms of the caspase regulator protein, c-FLIP, were shown to be differentially ex¬pressed in Th1 and Th2 cells. Both of the isoforms were up-regulated in response to TCR activation, but the expression of the short isoform was selectively induced by IL4, the Th2 inducing cytokine. Furthermore, the c-FLIP isoforms had distinct and opposite roles during the early differentiation of Th1 and Th2 cells. The knockdown of the long isoform of c-FLIP led to the induction of Th1 marker genes, such as IFNγ and TBET, whereas the depletion of c-FLIP short down-regulated Th2 marker genes IL-4 and GATA3. The third goal was to elucidate the gene expression profiles characterizing the T- and B-lymphocyte responses in vivo during experimental infection by intracellular bacte¬rium Chlamydia pneumoniae. Previously, it has been shown that CD8+ and CD4+ T cells are important for the protection against Chlamydia pneumoniae. In this study, the analysis revealed up-regulation of interferon induced genes during recurrent infection underlining the importance of IFNγ secreted by Th1 and CD8+ T cells in the protection against this pathogen. Taken together, in this study novel regulators of Th cell differ¬entiation were discovered and in addition the gene expression profiles of lymphocytes induced by Chlamydia pneumoniae infection were characterized.

Management of Soft Information in Sales and Operations Planning

With a Sales and Operations Planning (S&OP) process, a company aims to manage the demand and supply by planning and forecasting. The studied company uses an integrated S&OP process to improve the company's operations. The aim of this thesis is to develop this business process by finding the best possible way to manage the soft information in S&OP, whilst also understanding the importance and types (assumptions, risks and opportunities) of soft information in S&OP. The soft information in S&OP helps to refine future S&OP planning, taking into account the uncertainties that affect the balance of the long-term demand and supply (typically 12-18 months). The literature review was used to create a framework for soft information management process in S&OP. There were not found a concrete way how to manage soft information in the existing literature. In consequence of the poor literature available the Knowledge Management literature was used as the base for the framework creation, which was seen in the very same type of information management like the soft information management is. The framework created a four-stage process to manage soft information in S&OP that included also the required support systems. First phase is collecting and acquiring soft information in S&OP, which include also categorization. The categorization was the cornerstone to identify different requirements that needs to be taken into consideration when managing soft information in S&OP process. The next phase focus on storing data, which purpose is to ensure the soft information is managed in a common system (support system) in a way that the following phase makes it available to users in S&OP who need by help of sharing and applications process. The last phase target is to use the soft information to understand assumptions and thoughts of users behind the numbers in S&OP plans. With this soft management process the support system will have a key role. The support system, like S&OP tool, ensures that soft information is stored in the right places, kept up-to-date and relevancy. The soft information management process in S&OP strives to improve the relevant soft information documenting behind the S&OP plans into the S&OP support system. The process offers an opportunity to individuals to review, comment and evaluate soft information in S&OP made by their own or others. In the case company it was noticed that without a properly documented and distributed soft information in S&OP it was seen to cause mistrust towards the planning.

The role of metal ions in selective and sustainable processes

Sustainability and recycling are core values in today’s industrial operations. New materials, products and processes need to be designed in such a way as to consume fewer of the diminishing resources we have available and to put as little strain on the environment as possible. An integral part of this is cleaning and recycling. New processes are to be designed to improve the efficiency in this aspect. Wastewater, including municipal wastewaters, is treated in several steps including chemical and mechanical cleaning of waters. Well-cleaned water can be recycled and reused. Clean water for everyone is one of the greatest challenges we are facing today. Ferric sulphate, made by oxidation from ferrous sulphate, is used in water purification. The oxidation of ferrous sulphate, FeSO4, to ferric sulphate in acidic aqueous solutions of H2SO4 over finely dispersed active carbon particles was studied in a vigorously stirred batch reactor. Molecular oxygen was used as the oxidation agent and several catalysts were screened: active carbon, active carbon impregnated with Pt, Rh, Pd and Ru. Both active carbon and noble metal-active carbon catalysts enhanced the oxidation rate considerably. The order of the noble metals according to the effect was: Pt >> Rh > Pd, Ru. By the use of catalysts, the production capacities of existing oxidation units can be considerably increased. Good coagulants have a high charge on a long polymer chain effectively capturing dirty particles of the opposite charge. Analysis of the reaction product indicated that it is possible to obtain polymeric iron-based products with good coagulation properties. Systematic kinetic experiments were carried out at the temperature and pressure ranges of 60B100°C and 4B10 bar, respectively. The results revealed that both non-catalytic and catalytic oxidation of Fe2+ to Fe3+ take place simultaneously. The experimental data were fitted to rate equations, which were based on a plausible reaction mechanism: adsorption of dissolved oxygen on active carbon, electron transfer from Fe2+ ions to adsorbed oxygen and formation of surface hydroxyls. A comparison of the Fe2+ concentrations predicted by the kinetic model with the experimentally observed concentrations indicated that the mechanistic rate equations were able to describe the intrinsic oxidation kinetics of Fe2+ over active carbon and active carbon-noble metal catalysts. Engineering aspects were closely considered and effort was directed to utilizing existing equipment in the production of the new coagulant. Ferrous sulphate can be catalytically oxidized to produce a novel long-chained polymeric iron-based flocculent in an easy and affordable way in existing facilities. The results can be used for modelling the reactors and for scale-up. Ferric iron (Fe3+) was successfully applied for the dissolution of sphalerite. Sphalerite contains indium, gallium and germanium, among others, and the application can promote their recovery. The understanding of the reduction process of ferric to ferrous iron can be used to develop further the understanding of the dissolution mechanisms and oxidation of ferrous sulphate. Indium, gallium and germanium face an ever-increasing demand in the electronics industry, among others. The supply is, however, very limited. The fact that most part of the material is obtained through secondary production means that real production quota depends on the primary material production. This also sets the pricing. The primary production material is in most cases zinc and aluminium. Recycling of scrap material and the utilization of industrial waste, containing indium, gallium and geranium, is a necessity without real options. As a part of this study plausible methods for the recovery of indium, gallium and germanium have been studied. The results were encouraging and provided information about the precipitation of these valuables from highly acidic solutions. Indium and gallium were separated from acidic sulphuric acid solutions by precipitation with basic sulphates such as alunite or they were precipitated as basic sulphates of their own as galliunite and indiunite. Germanium may precipitate as a basic sulphate of a mixed composition. The precipitation is rapid and the selectivity is good. When the solutions contain both indium and gallium then the results show that gallium should be separated before indium to achieve a better selectivity. Germanium was separated from highly acidic sulphuric acid solutions containing other metals as well by precipitating with tannic acid. This is a highly selective method. According to the study other commonly found metals in the solution do not affect germanium precipitation. The reduction of ferric iron to ferrous, the precipitation of indium, gallium and germanium, and the dissolution of the raw materials are strongly depending on temperature and pH. The temperature and pH effect were studied and which contributed to the understanding and design of the different process steps. Increased temperature and reduced pH improve the reduction rate. Finally, the gained understanding in the studied areas can be employed to develop better industrial processes not only on a large scale but also increasingly on a smaller scale. The small amounts of indium, gallium and germanium may favour smaller and more locally bound recovery.