Environments of Acitive Galaxies

This dissertation presents studies on the environments of active galaxies. Paper I is a case study of a cluster of galaxies containing BL Lac object RGB 1745+398. We measured the velocity dispersion, mass, and richness of the cluster. This was one of the most thorough studies of the environments of a BL Lac object. Methods used in the paper could be used in the future for studying other clusters as well. In Paper II we studied the environments of nearby quasars in the Sloan Digital Sky Survey (SDSS). We found that quasars have less neighboring galaxies than luminous inactive galaxies. In the large-scale structure, quasars are usually located at the edges of superclusters or even in void regions. We concluded that these low-redshift quasars may have become active only recently because the galaxies in low-density environments evolve later to the phase where quasar activity can be triggered. In Paper III we extended the analysis of Paper II to other types of AGN besides quasars. We found that different types of AGN have different large-scale environments. Radio galaxies are more concentrated in superclusters, while quasars and Seyfert galaxies prefer low-density environments. Different environments indicate that AGN have different roles in galaxy evolution. Our results suggest that activity of galaxies may depend on their environment on the large scale. Our results in Paper III raised questions of the cause of the environment-dependency in the evolution of galaxies. Because high-density large-scale environments contain richer groups and clusters than the underdense environments, our results could reflect smaller-scale effects. In Paper IV we addressed this problem by studying the group and supercluster scale environments of galaxies together. We compared the galaxy populations in groups of different richnesses in different large-scale environments. We found that the large-scale environment affects the galaxies independently of the group richness. Galaxies in low-density environments on the large scale are more likely to be star-forming than those in superclusters even if they are in groups with the same richness. Based on these studies, the conclusion of this dissertation is that the large-scale environment affects the evolution of galaxies. This may be caused by different “speed” of galaxy evolution in low and high-density environments: galaxies in dense environments reach certain phases of evolution earlier than galaxies in underdense environments. As a result, the low-density regions at low redshifts are populated by galaxies in earlier phases of evolution than galaxies in high-density regions.

State of Logistics and Operations Management in Finnish and Swedish Companies – Survey Research Findings

In this research we are examining what is the status of logistics and operations management in Finnish and Swedish companies. Empirical data is based on the web based questionnaire, which was completed in the end of 2007 and early 2008. Our examination consists of roughly 30 answers from largest manufacturing (highest representation in our sample), trade and logistics/distribution companies. Generally it could be argued that these companies operate in complex environment, where number of products, raw materials/components and suppliers is high. However, usually companies rely on small amount of suppliers per raw material/component (highest frequency is 2), and this was especially the case among Swedish companies, and among those companies, which favoured overseas sourcing. Sample consisted of companies which mostly are operating in an international environment, and are quite often multinationals. Our survey findings reveal that companies in general have taken logistics and information technology as part of their strategy process; utilization of performance measures as well as system implementations have followed the strategy decisions. In the transportation mode side we identify that road transports dominate all transport flow classes (inbound, internal and outbound), followed by sea and air. Surprisingly small amount of companies use railways, but in general we could argue that Swedish companies prefer this mode over Finnish counterparts. With respect of operations outsourcing, we found that more traditional areas of logistics outsourcing are driving factors in company's performance measurement priority. In contrary to previous research, our results indicate that the scope of outsourcing is not that wide in logistics/operations management area, and companies are not planning to outsource more in the near future. Some support is found for more international operations and increased outsourcing activity. From the increased time pressure of companies, we find evidence that local as well as overseas customers expect deliveries within days or weeks, but suppliers usually supply within weeks or months. So, basically this leads into considerable inventory holding. Interestingly local and overseas sourcing strategy does not have that great influence on lead time performance of these particular sourcing areas - local strategy is anyway considerably better in responding on market changes due to shorter supply lead times. In the end of our research work we have completed correlation analysis concerning items asked with Likert scale. Our analysis shows that seeing logistics more like a process rather than function, applying time based management, favouring partnerships and measuring logistics within different performance dimensions results on preferred features and performance found in logistics literature.

Eliminating Software Failures - A Literature Survey

Software faults are expensive and cause serious damage, particularly if discovered late or not at all. Some software faults tend to be hidden. One goal of the thesis is to figure out the status quo in the field of software fault elimination since there are no recent surveys of the whole area. Basis for a structural framework is proposed for this unstructured field, paying attention to compatibility and how to find studies. Bug elimination means are surveyed, including bug knowhow, defect prevention and prediction, analysis, testing, and fault tolerance. The most common research issues for each area are identified and discussed, along with issues that do not get enough attention. Recommendations are presented for software developers, researchers, and teachers. Only the main lines of research are figured out. The main emphasis is on technical aspects. The survey was done by performing searches in IEEE, ACM, Elsevier, and Inspect databases. In addition, a systematic search was done for a few well-known related journals from recent time intervals. Some other journals, some conference proceedings and a few books, reports, and Internet articles have been investigated, too. The following problems were found and solutions for them discussed. Quality assurance is testing only is a common misunderstanding, and many checks are done and some methods applied only in the late testing phase. Many types of static review are almost forgotten even though they reveal faults that are hard to be detected by other means. Other forgotten areas are knowledge of bugs, knowing continuously repeated bugs, and lightweight means to increase reliability. Compatibility between studies is not always good, which also makes documents harder to understand. Some means, methods, and problems are considered method- or domain-specific when they are not. The field lacks cross-field research.

Health Related Quality of Life after Childhood Cancer - A Finnish Nationwide survey

The purpose of this Finnish epidemiological nationwide cross-sectional study was to evaluate the Health Related Quality of Life (HRQL) of young people that have survived childhood cancer at least four years after cancer diagnosis. The study aims were (1) to increase knowledge and understanding about the relationship between childhood cancer and its treatment and HRQL of childhood cancer survivors and (2) to identify survivors who need and could benefit from ongoing long-term follow-up, as well as (3) to identify what kind of aftercare the childhood cancer survivors will possibly need. HRQL and fatigue of currently still young survivors of extracranial childhood malignancies were evaluated with self-reports and parent proxy reports. HRQL was measured with age-appropriate generic instruments: PedsQL™, SF-36, 15D, 16D and 17D. Fatigue for children and adolescents aged below 18 years was measured with the PedsQL™ Multidimensional Fatigue Scale Finnish version. PedsQL™ parent-proxy and the PedsQL™ Multidimensional Fatigue Scale Parentproxy instruments were used to assess the perception of the parents on HRQL and fatigue of their children and adolescents. Postal-survey questionnaires were mailed to 852 childhood cancer survivors aged 11-27 years and their randomly selected gender-, age and living-place matched controls, as well as under 18-year-old children´s parents. A total of 474 survivors, 595 controls, 209 survivor’s parent and 253 control’s parent replied. The mean age of survivors at the time of the study was 18.4 years. The mean length of survival was 12.3 years, and the mean age at diagnosis 5.5 years. The most of the Finnish childhood cancer survivors evaluated that their HRQL as good. Survivors rated their HRQL equal or higher than their controls. The only dimension where the survivors scored poorer than the controls was the 15D mobility dimension. Survivors of childhood cancer did not suffer from significant fatigue. There were subgroups of childhood cancer survivors who had poorer level of HRQL, and suffered from fatigue more than the reference group. The demographic factors that associated with poorer HRQL were female gender, greater weight, living alone, need of remedial education, an additional non-cancer diagnosis, survivors with siblings, and self-reported unhappiness. Disease-related factors that associated with poorer HRQL were higher age at the time of diagnosis, the diagnosis of Wilms tumor, neuroblastoma, or osteosarcoma, and treatment with stem cell transplantation. The factors associated with more fatigue in survivors were male gender, older age at evaluation, the need of remedial education at school, lower overall average grade in the latest school marks report, length of survival more than 10 years, lower HRQL-scores, and a sarcoma diagnosis. However, all the used demographic and disease related factors explained only about one third of the variation in the HRQL scores. In open questions, the survivors were most worried about their physical health, but were also worried about their mental health, cancer inheritance, late-effects, and fertility and relapse issues. It seems that there are subgroups of survivors who need and could benefit from ongoing long-term follow-up. In the future, the survivors of childhood cancer need more information about their physical and mental health, as well as on their cancer inheritance, possible late-effects including fertility issues, and on the risk of relapse.

Survey of transportation of liquid bulk chemicals in the Baltic Sea

This study is made as a part of the Chembaltic (Risks of Maritime Transportation of Chemicals in Baltic Sea) project which gathers information on the chemicals transported in the Baltic Sea. The purpose of this study is to provide an overview of handling volumes of liquid bulk chemicals (including liquefied gases) in the Baltic Sea ports and to find out what the most transported liquid bulk chemicals in the Baltic Sea are. Oil and oil products are also viewed in this study but only in a general level. Oils and oil products may also include chemical-related substances (e.g. certain bio-fuels which belong to MARPOL annex II category) in some cargo statistics. Chemicals in packaged form are excluded from the study. Most of the facts about the transport volumes of chemicals presented in this study are based on secondary written sources of Scandinavian, Russian, Baltic and international origin. Furthermore, statistical sources, academic journals, periodicals, newspapers and in later years also different homepages on the Internet have been used as sources of information. Chemical handling volumes in Finnish ports were examined in more detail by using a nationwide vessel traffic system called PortNet. Many previous studies have shown that the Baltic Sea ports are annually handling more than 11 million tonnes of liquid chemicals transported in bulk. Based on this study, it appears that the number may be even higher. The liquid bulk chemicals account for approximately 4 % of the total amount of liquid bulk cargoes handled in the Baltic Sea ports. Most of the liquid bulk chemicals are handled in Finnish and Swedish ports and their proportion of all liquid chemicals handled in the Baltic Sea is altogether over 50 %. The most handled chemicals in the Baltic Sea ports are methanol, sodium hydroxide solution, ammonia, sulphuric and phosphoric acid, pentanes, aromatic free solvents, xylenes, methyl tert-butyl ether (MTBE) and ethanol and ethanol solutions. All of these chemicals are handled at least hundred thousand tonnes or some of them even over 1 million tonnes per year, but since chemical-specific data from all the Baltic Sea countries is not available, the exact tonnages could not be calculated in this study. In addition to these above-mentioned chemicals, there are also other high volume chemicals handled in the Baltic Sea ports (e.g. ethylene, propane and butane) but exact tonnes are missing. Furthermore, high amounts of liquid fertilisers, such as solution of urea and ammonium nitrate in water, are transported in the Baltic Sea. The results of the study can be considered indicative. Updated information about transported chemicals in the Baltic Sea is the first step in the risk assessment of the chemicals. The chemical-specific transportation data help to target hazard or e.g. grounding/collision risk evaluations to chemicals that are handled most or have significant environmental hazard potential. Data gathered in this study will be used as background information in later stages of the Chembaltic project when the risks of the chemicals transported in the Baltic Sea are assessed to highlight the chemicals that require special attention from an environmental point of view in potential marine accident situations in the Baltic Sea area.

Statistical analysis of survey-based event history data with application to modeling of unemployment duration

Longitudinal surveys are increasingly used to collect event history data on person-specific processes such as transitions between labour market states. Surveybased event history data pose a number of challenges for statistical analysis. These challenges include survey errors due to sampling, non-response, attrition and measurement. This study deals with non-response, attrition and measurement errors in event history data and the bias caused by them in event history analysis. The study also discusses some choices faced by a researcher using longitudinal survey data for event history analysis and demonstrates their effects. These choices include, whether a design-based or a model-based approach is taken, which subset of data to use and, if a design-based approach is taken, which weights to use. The study takes advantage of the possibility to use combined longitudinal survey register data. The Finnish subset of European Community Household Panel (FI ECHP) survey for waves 1–5 were linked at person-level with longitudinal register data. Unemployment spells were used as study variables of interest. Lastly, a simulation study was conducted in order to assess the statistical properties of the Inverse Probability of Censoring Weighting (IPCW) method in a survey data context. The study shows how combined longitudinal survey register data can be used to analyse and compare the non-response and attrition processes, test the missingness mechanism type and estimate the size of bias due to non-response and attrition. In our empirical analysis, initial non-response turned out to be a more important source of bias than attrition. Reported unemployment spells were subject to seam effects, omissions, and, to a lesser extent, overreporting. The use of proxy interviews tended to cause spell omissions. An often-ignored phenomenon classification error in reported spell outcomes, was also found in the data. Neither the Missing At Random (MAR) assumption about non-response and attrition mechanisms, nor the classical assumptions about measurement errors, turned out to be valid. Both measurement errors in spell durations and spell outcomes were found to cause bias in estimates from event history models. Low measurement accuracy affected the estimates of baseline hazard most. The design-based estimates based on data from respondents to all waves of interest and weighted by the last wave weights displayed the largest bias. Using all the available data, including the spells by attriters until the time of attrition, helped to reduce attrition bias. Lastly, the simulation study showed that the IPCW correction to design weights reduces bias due to dependent censoring in design-based Kaplan-Meier and Cox proportional hazard model estimators. The study discusses implications of the results for survey organisations collecting event history data, researchers using surveys for event history analysis, and researchers who develop methods to correct for non-sampling biases in event history data.

User Experience Patterns for/of Innovation by Design: A Survey on Design Practices in the Software Development and Innovation Lifecycle

The User Experience (UX) designers are undoubtedly aware of how many UX design methods currently exist and that sometimes it becomes a problem to choose an appropriate one. What are all of methods that designers have in their “arsenal”? When can they use them? This thesis presents the research on the design methods in the contemporary context of User Experience (UX) and Innovations by using a survey approach. The study is limited to cover the domain of consumer mobile services development and provider companies around the world. The study follows 2 clear objectives: (1) to understand what design methods are currently used in that context and to what extent they are used (2) to identify at what stage according to the UX design thinking process for creating innovations they are placed. The study contributes to the research in the field of UX design and Innovations and extends the knowledge in that field together with communities’ (UXPA, SIGCHI, SIGSOFT) members’ cooperation. The research is vital due to lack of information on design practices and their application in the chosen context.