De Ate Homerica [et] Hesiodea

Dedicatio: Joseph Bremer [ruots. pr.], Abrahamus Paulin, Arvidus Paulin.

Nesta folha esta lamçado o'Cabo de Boa Esperamca ate a conociali de leste oeste

Kartta kuuluu A. E. Nordenskiöldin kokoelmaan

Paperin pinnan karakterisoinnin ja painettavuuden tutkimusmenetelmät

Työn tarkoituksena on ollut tutkia paperin pinnan karakterisoinnin menetelmiä ja tehdä katsauspaperin painettavuuden ennustamisen tutkimuksiin. Kaikkien kehitettyjen menetelmien tarkoituksena on tavalla tai toisella mitata paperin visuaalista vaikutelmaa loppukäyttäjän kannalta sekä ennustaa paperin painettavuutta. Menetelmiä on kehitetty aina 1940-luvulta lähtien ja tekniikan kehittyessä markkinoille tulee uusia menetelmiä, jotka ovat nopeampia ja tarkempia kuin edeltäjänsä. Työssä tarkasteltavat menetelmät on jaoteltu mekaanisiin, optisiin ja elektronisäteilyn läpäisyyn perustuviin menetelmiin. Lopuksi on tarkasteltu tutkimuksia, joiden pääasiallinen tarkoitus on ollut kehittää mittalaitteita ennustamaan paperin painotulosta todellisissa painatusolosuhteissa. Laboratoriolaitteita ja on-line-mittareita ei ole jaoteltu erikseen, koska menetelmän perusteella on helppo havaita, voiko laite mitata jotakin paperin ominaisuutta jopa yli 40 metriä sekunnissa liikkuvalla paperirainalla.

Luotettavuuskeskeisen kunnossapidon soveltaminen vaneriteollisuuden koneille

Diplomityön tarkoituksena on tutkia luotettavuuskeskeisen kunnossapidon soveltamista Raute Oyj:n vanerikoneille. Työn tavoitteena on luoda suunnitelma luotettavuuskeskeisen kunnossapidon soveltamiseksi Raute Oyj:llä. Tavoitteena on myös kehittää malli ennakkohuoltosuunnitelmien sekä kriittisten huoltojen ja varaosien määrittelyyn päälinjoille. Kunnossapitoliiketoiminta on Rautella voimakkaasti kasvava liiketoiminta-alue. Voimakkaan kasvun seurauksena on yritykseen syntynyt kunnossapitotoimintojen kehitystarve. Luotettavuuskeskeistä kunnossapitoa hyödyntämällä on tarkoitus kehittää vanerikoneiden kunnossapitoa ja luoda Rautelle kunnossapitotuotteita. Työssä on tutkittu luotettavuuskeskeisen kunnossapidon soveltamista va-neriteollisuuden koneille laitevalmistajan näkökulmasta. Työssä on käsitelty kirjallisuuden pohjalta vanerin valmistusprosessia, vanerikoneita, kunnossapitoa sekä luotettavuuskeskeistä kunnossapitoa. Lisäksi on selvitetty vanerikoneiden kunnossapidon nykytilaa Raute Oyj:llä ja sen asiakkaiden vaneritehtaissa. Työn tuloksena syntyi toimintaehdotus luotettavuuskeskeisen kunnossapidon soveltamiseksi Rauten tuotteille. Ennakkohuoltosuunnitelmien luomiseen ja kehittämiseen työssä syntyi kunnossapitomalli, jonka pohjalta työssä luotiin xy-pöllinkeskittäjälle luotettavuuskeskeiseen kunnossapitoon perustuva ennakkohuoltosuunnitelma sekä määritettiin kriittiset varaosat.

Quantile Estimation in Non-Stationary Streaming Data

We provide an incremental quantile estimator for Non-stationary Streaming Data. We propose a method for simultaneous estimation of multiple quantiles corresponding to the given probability levels from streaming data. Due to the limitations of the memory, it is not feasible to compute the quantiles by storing the data. So estimating the quantiles as the data pass by is the only possibility. This can be effective in network measurement. To provide the minimum of the mean-squared error of the estimation, we use parabolic approximation and for comparison we simulate the results for different number of runs and using both linear and parabolic approximations.

Linjasekoittimensekoituskyvyn määrittäminen

Työn tavoitteena oli kehittää sekoituskyvyn empiirinen monimuuttujafunktio eräälle dynaamiselle linjasekoittimelle. Monimuuttujafunktio oli tarkoitus kehittää sekoittimen kierrosnopeuden, virtaavien materiaalien ja tilavuusvirtausten perus-teella. Työn kirjallisuusosassa tarkasteltiin pääosin dynaamisia linjasekoittimia ja niiden toimintaperiaatteita sekä sekoituskyvyn määrittämiseen soveltuvia mittausmene-telmiä. Sekoitettavien aineiden epähomogeenisuus määritettiin mittaamalla termoelemen-teillä sekoittimen jälkeisen virran lämpötilavaihtelut. Sekoitettavina aineina käy-tettiin kolmea erilaista seosta: vesi-vesi-, kuitususpensio-vesi- ja karboksyylime-tyyliselluloosa-vesiseoksia. Muita muuttujia kokeissa olivat neljä eri sekoittimen kierrosnopeutta, neljä eri päävirran tilavuusvirtausta ja kolme päävirran sekäsii-hen lisättävän sivuvirran suhdetta. Monimuuttujafunktiokehitettiin vain kuitususpensio-vesiajojen pohjalta muilla seoksilla tehtyjen koeajojen osittaisen epäonnistumisen vuoksi. Hallitsevaksi pa-rametriksi monimuuttujafunktiossa osoittautui sekoittimen kierrosnopeus. Osittai-nen epäonnistuminen kokeissa johtui osaksi termoelementtien käytön sopimatto-muudesta sekoituskyvyn määrittämiseen ja osaksi sekoitettavien aineiden valin-nasta. Jatkotutkimuksiaajatellen muista sekoituskyvyn mittaamiseen käytettävissä olevista menetelmistäkäyttökelpoisimmaksi arvioitiin sähkötomografia.

Welding time models for cost calculations in the early stages of the design process

It is generally accepted that between 70 and 80% of manufacturing costs can be attributed to design. Nevertheless, it is difficult for the designer to estimate manufacturing costs accurately, especially when alternative constructions are compared at the conceptual design phase, because of the lack of cost information and appropriate tools. In general, previous reports concerning optimisation of a welded structure have used the mass of the product as the basis for the cost comparison. However, it can easily be shown using a simple example that the use of product mass as the sole manufacturing cost estimator is unsatisfactory. This study describes a method of formulating welding time models for cost calculation, and presents the results of the models for particular sections, based on typical costs in Finland. This was achieved by collecting information concerning welded products from different companies. The data included 71 different welded assemblies taken from the mechanical engineering and construction industries. The welded assemblies contained in total 1 589 welded parts, 4 257 separate welds, and a total welded length of 3 188 metres. The data were modelled for statistical calculations, and models of welding time were derived by using linear regression analysis. Themodels were tested by using appropriate statistical methods, and were found to be accurate. General welding time models have been developed, valid for welding in Finland, as well as specific, more accurate models for particular companies. The models are presented in such a form that they can be used easily by a designer, enabling the cost calculation to be automated.

Multilevel converter modulation: implementation and analysis

Multilevel converters provide an attractive solution to bring the benefits of speed-controlled rotational movement to high-power applications. Therefore, multilevel inverters have attracted wide interest in both the academic community and in the industry for the past two decades. In this doctoral thesis, modulation methods suitable especially for series connected H-bridge multilevel inverters are discussed. A concept of duty cycle modulation is presented and its modification is proposed. These methods are compared with other well-known modulation schemes, such as space-vector pulse width modulation and carrier-based modulation schemes. The advantage of the modified duty-cycle modulation is its algorithmic simplicity. A similar mathematical formulation for the original duty cycle modulation is proposed. The modified duty cycle modulation is shown to produce well-formed phase-to-neutral voltages that have lower total harmonic distortion than the space-vector pulse width modulation and the duty cycle modulation. The space-vector-based solution and the duty cycle modulation, on the other hand, result in a better-quality line-to-line voltage and current waveform. The voltage of the DC links in the modules of the series-connected H-bridge inverter are shown to fluctuate while they are under load. The fluctuation causes inaccuracies in the voltage production, which may result in a failure of the flux estimator in the controller. An extension for upper-level modulation schemes, which changes the switching instants of the inverter so that the output voltage meets the reference voltage accurately regardless of the DC link voltages, is proposed. The method is shown to reduce the error to a very low level when a sufficient switching frequency is used. An appropriate way to organize the switching instants of the multilevel inverter is to make only one-level steps at a time. This causes restrictions on the dynamical features of the modulation schemes. The produced voltage vector cannot be rotated several tens of degrees in a single switching period without violating the above-mentioned one-level-step rule. The dynamical capabilities of multilevel inverters are analyzed in this doctoral thesis, and it is shown that the multilevel inverters are capable of operating even in dynamically demanding metal industry applications. In addition to the discussion on modulation schemes, an overvoltage in multilevel converter drives caused by cable reflection is addressed. The voltage reflection phenomenon in drives with long feeder cables causes premature insulation deterioration and also affects the commonmode voltage, which is one of the main reasons for bearing currents. Bearing currents, on the other hand, cause fluting in the bearings, which results in premature bearing failure. The reflection phenomenon is traditionally prevented by filtering, but in this thesis, a modulationbased filterless method to mitigate the overvoltage in multilevel drives is proposed. Moreover, the mitigation method can be implemented as an extension for upper-level modulation schemes. The method exploits the oscillations caused by two consecutive voltage edges so that the sum of the oscillations results in a mitigated peak of the overvoltage. The applicability of the method is verified by simulations together with experiments with a full-scale prototype.

Simulating the performance of paper machine control

The topic of this thesis is the simulation of a combination of several control and data assimilation methods, meant to be used for controlling the quality of paper in a paper machine. Paper making is a very complex process and the information obtained from the web is sparse. A paper web scanner can only measure a zig zag path on the web. An assimilation method is needed to process estimates for Machine Direction (MD) and Cross Direction (CD) profiles of the web. Quality control is based on these measurements. There is an increasing need for intelligent methods to assist in data assimilation. The target of this thesis is to study how such intelligent assimilation methods are affecting paper web quality. This work is based on a paper web simulator, which has been developed in the TEKES funded MASI NoTes project. The simulator is a valuable tool in comparing different assimilation methods. The thesis contains the comparison of four different assimilation methods. These data assimilation methods are a first order Bayesian model estimator, an ARMA model based on a higher order Bayesian estimator, a Fourier transform based Kalman filter estimator and a simple block estimator. The last one can be considered to be close to current operational methods. From these methods Bayesian, ARMA and Kalman all seem to have advantages over the commercial one. The Kalman and ARMA estimators seems to be best in overall performance.

Luistonestojärjestelmän ja elektronisen tasauspyörästön testaus ja implementointi hybridityökoneympäristöön

Työssä toteutettiin C-kielellä luistonestojärjestelmä ja elektroninen tasauspyörästö Simulinkmallien pohjalta hybridityökoneeseen. Hybridityökoneen sähkökäytöt mahdollistavat tarkan vääntömomentin säädön, joka mahdollistaa työssä kuvatun kaltaisen järjestelmän toteuttamisen. Toteutettua järjestelmää simuloitiin MeVEA Oy:n ajoneuvomallinnukseen kehitetyssä simulaattorissa. Lisäksi järjestelmästä kehitettiin Visedo Oy:n sähkökäyttösimulaattoriin sopiva versio, jota testattiin Visedon sähkökäyttöjä simuloivan ohjelman kanssa. Simulointituloksien mukaan luistonesto estää vetäviä pyöriä luistamasta liukkaalla alustalla eikä toisaalta vähennä aiheetta kuljettajan asettamaa vääntömomenttia. Myös sähköinen tasauspyörästö toimi kuten oli suunniteltu. Työssä kehitetty luistonesto tarvitsee toimiakseen tiedon ajoneuvon kokonaismassasta, joten työssä kehitettiin myös tapa ajoneuvon massan estimoimiseksi ajoneuvon kiihdyttäessä. Massan estimointia testattiin pitävällä ja liukkaalla alustalla. Massan estimointi toimi simulaattoriympäristössä hyvällä tarkkuudella.

Individual dietary counselling during and after pregnancy: Impact on diet and body weight

In Finland, maternity and child health clinics play a key role in promoting health in young families. Currently, obesity causes the greatest challenges to clinics. In obese pregnant women, an increased risk for metabolic diseases exist which can affect both the mother and child. The purpose of this thesis was to explore the role of dietary counselling: in Finnish health clinics; in the regulation of dietary intake; and in affecting the body weight of women. The main aim was to test the effect of dietary counselling and probiotic intervention on dietary intake and maternal body weight during and after pregnancy. In addition to dietary counselling, the effect of other factors, such as eating behaviour on dietary intake and body weight control after pregnancy was assessed. Another aim was also to evaluate dietary counselling practices by nurses (n = 327) in Finnish health clinics assessed by a questionnaire. At the beginning of the pregnancy, women (n = 256) enrolled in a dietary intervention study, were randomised into three groups. One group received dietary counselling with probiotics, one had counselling with placebo and the third group was the control group. The control group consisted of women whom did not receive counselling and took placebo. Probiotics and placebo supplements were used until the end of exclusive breastfeeding or six months after pregnancy. Women were followed from early pregnancy up to four years after pregnancy. Follow-up visits took place three times during pregnancy, at one and six months, and one, two and four years after pregnancy. Dietary counselling, provided by a nutritionist, aimed to influence the quality of dietary fat intake. Dietary counselling is important to provide in clinics, as determined by the nurses, and these nurses expressed a want to improve their own nutritional knowledge through education. The nurses had varying knowledge of current dietary recommendations. Dietary counselling for women during and after pregnancy resulted in beneficial changes in dietary intake up to one year after pregnancy and body weight and waist circumference up to four years after pregnancy. Probiotics had a beneficial effect together with dietary counselling on waist circumference until one year after pregnancy, but not throughout the long term, four years after pregnancy. Other factors, such as eating behaviour, associated with dietary intake and body weight control after pregnancy. Specifically, dietary recommendations are reached amongst women whom had high cognitive restraint in their eating behaviour and did not demonstrate uncontrolled eating. Overweight women more frequently emotionally ate compared to normal weight women and women with central adiposity related more frequently to having an uncontrolled eating behaviour than women with normal waist circumference. In addition, being overweight prior to pregnancy and excessive weight gain during pregnancy associated with increased body weight retention after pregnancy. This study showed that individual dietary counselling is useful in influencing dietary intake which adheres to dietary recommendations and this counselling influences, favourably, body weight after pregnancy. Especially, women with the risk for weight retention, such as women who have emotional and uncontrolled eating behaviours, who were overweight prior to pregnancy or those who had excessive weight gain during pregnancy, may benefit from individual dietary counselling. This study underscores the need to develop dietary counselling practices for pregnant women and their follow-up after pregnancy in Finnish health clinics. These practices include increasing the efficacy of the counselling such as collaboration with families, having knowledgable health professionals and having sufficient resources.

Keskitehoestimaattorin lisääminen diesel-sähköiseen hybridijärjestelmään

Nykyajan jatkuvasti kiristyvät päästörajoitukset ja ilmastonmuutoksen uhka ovat ajavia voimia kehittämään voimalaitosten tekniikkaa energiatehokkaampaan ja ympäristöystävällisempään suuntaan. Polttomoottoritekniikan parantaminen on tärkeä osa tätä kehitystä, mutta jo nykyisiä moottoreita voitaisiin ajaa energiate-hokkaammin käyttämällä akustoa ja älykästä säätöjärjestelmää apuna. Työssä tutkitaan simulaatioiden avulla voidaanko ulkomerellä toimivan huolto-aluksen energiatehokkuutta parantaa muokkaamalla sen tehon tuottoa keskitehoes-timaattorin ja akuston avulla.

Explaining the Shifts of International Trade in Pulp and Paper Industry

The pulp and paper industry is currently facing broad structural changes due to global shifts in demand and supply. These changes have significant impacts on national economies worldwide. In this paper, we describe the recent trends in the pulp and recovered paper (RP) production, and estimate augmented gravity models of bilateral trade for chemical pulp and RP exports with panel data. According to our results, there is some variation in the effects of the traditional gravity-model variables between pulp grades and RP. The results imply also that, in comparison to export supply, import demand plays a larger role in determining the volume of exports. Finally, it is evident that Asia, particularly China, is the most important driver of chemical pulp and RP trade: China is hungry for fiber, and must import to satisfy its growing needs. Moreover, the speed of China’s growth in chemical pulp and RP imports has been driving the increased significance of planted forests in the exports of hardwood pulp (BHKP) as well.

Structural dynamics in the global pulp and paper industry

The pulp and paper industry is currently facing broad structural changes due to global shifts in demand and supply. These changes have significant impacts on national economies worldwide. Planted forests (especially eucalyptus) and recovered paper have quickly increased their importance as raw material for paper and paperboard production. Although advances in information and communication technologies could reduce the demand for communication papers, and the growth of paper consumption has indeed flattened in developed economies, particularly in North America and Western Europe, the consumption is increasing on a global scale. Moreover, the focal point of production and consumption is moving from the Western world to the rapidly growing markets of Southeast Asia. This study analyzes how the so-called megatrends (globalization, technological development, and increasing environmental awareness) affect the pulp and paper industry’s external environment, and seeks reliable ways to incorporate the impact of the megatrends on the models concerning the demand, trade, and use of paper and pulp. The study expands current research in several directions and points of view, for example, by applying and incorporating several quantitative methods and different models. As a result, the thesis makes a significant contribution to better understand and measure the impacts of structural changes on the pulp and paper industry. It also provides some managerial and policy implications.

Design of the sensorless pressure control system for a centrifugal pump

This thesis investigates the pressure-based control of a variable-speed-driven pump system in the case of existing output pressure measurement and in the case of sensorless system, where the actual output pressure value is calculated with the steady state estimator.