Improving Product Information Management in Global Project Based Manufacturing

The transition of project based manufacturing business, even more into global networks, sets up challenges for companies to manage their business in this new operating environment. One way to tackle these challenges is the successful management of product information through an extended product’s lifecycle. Thus, one objective of this research is to find ways how product information management in global project based manufacturing can be improved. Another objective is to find a solution how the target company can improve its product information management in the offer-to-procurement business process. Due to the nature of the topic, the study follows constructive research methodology with qualitative methods. By combining literature related to this topic a framework is created to improve product information management in global project based manufacturing. The improvement process in this framework is based on a systematic approach from the current state towards target state. A general aim for improvements should be the integrated product and project lifecycle information management through Lean approach. This introduced framework is applied to the target company through two case projects. Data for building view of current state and analysis is collected mostly by theme interviews and also utilizing other material from the target company. Used tools help to analyzing was the BPMN and the Trace matrix for business chains. Results of the improvement process are collected in a solution proposal which contain the strategic target state as well as long and short term objectives. The strategic target state is defined as controlled customization. Also during the improvement process are created the Information requirements chart in the offer-to-procurement business process, and the Project related initial information questionnaire to customer.

Electrical Machine Product Development; Transmission to Lean Approach

The requirements set by the market for electrical machines become increasingly demanding requiring more sophisticated technological solutions. Companies producing electrical ma-chines are challenged to develop machines that provide competitive edge for the customer for example through increased efficiency, reliability or some customer specific special requirement. The objective of this thesis is to derive a proposal for the first steps to transform the electrical machine product development process of a manufacturing company towards lean product development. The current product development process in the company is presented together with the processes of four other companies interviewed for the thesis. On the basis of current processes of the electrical machine industry and the related literature, a generalized electrical machine product development process is derived. The management isms and –tools utilized by the companies are analyzed. Adoption of lean Pull-Event –reviews, Oobeya –management and Knowledge based product development are suggested as the initial steps of implementing lean product development paradigm in the manufacturing company. Proposals for refining the cur-rent product development process and increasing the stakeholder involvement in the development projects are made. Lean product development is finding its way to Finnish electrical machine industry, but the results will be available only after the methods have been implemented and adopted by the companies. There is some enthusiasm about the benefits of lean approach and if executed successfully it will provide competitive edge for the Finnish electrical machine industry.

USING ATHLETE ENDORSEMENT IN BRAND POSITIONING – An insight from multinational sports goods companies

It has become a popular method in marketing campaigns to use well-known and admired personalities to promote products. A famous person can draw attention to the brand and change consumers’ perceptions of the brand. The research problem of this study was to offer guidelines on how to use athlete endorsement effectively in brand positioning. This research tried to illustrate how athlete endorsement is a vital brand building factor. Athletes have been found to have special credibility, so this research concentrated on the sports goods industry. Furthermore, athlete endorsement has become a natural part of communicating a sports brand. Athletes highlight the performance of the brand to the consumers. The study was conducted as a qualitative research applying case study method. The two case companies selected for this study were Adidas and Puma. The main findings of the empirical research corresponded to the theoretical framework of the study. Brand positioning strategies in the sports goods industry often include athlete endorsement to some extent. Large multinational companies try to attract the best athletes to promote their brand. The key to successful brand positioning is to have a good product with the right personalities to promote it. However, large multinational companies may face difficulties in localizing their marketing efforts. As a result, global campaigns may not be lucrative everywhere. The role of an expert in an athlete’s sport has resulted in increasing credibility in promoting brands. Creating a superior product in consumers’ minds creates competitive advantage. A top athlete may be linked with superior equipment. After considering the goals of the positioning strategy, companies need to plan their brand awareness process, brand image and brand values. Then, athletes need to be selected based on their characteristics to meet the criteria. Sport sponsorship is a way to support the message delivered through athlete endorsement. Athlete endorsement and sport sponsorship complement the marketing communications mix of a brand. Additionally, companies raise brand awareness and communicate brand image through the athlete. Thus, athletes may earn more money through the sponsorship deals and even feature the advertisements after their professional career. Key words

Launching the product innovation to a market: case study from a dairy industry

In the environment of ever-changing needs of customers, technologies and competitors, the survival of the company depends on how well it researches, develops and implements new products to the market. The need for development of new products relates to many factors: globalization, international competition which is now underway on a global scale, scientific advances and development of production, changes in consumer preferences and consumer behavior. In this study the focus is on the company form a dairy products industry. This study is aimed to defining the role of product innovation launch strategy in an overall enterprise strategy, and to select the optimal combination of its marketing tools. The main purpose of this study is to determine place and the role of innovative marketing based in the innovation process, and to determine launch and positioning strategies in the general concept of an innovative product. The object of the study is the Russian enterprise, which is aimed to achieve a competitive advantage through the continuous production of new products, upgrade existing ones and improve innovation management practices. Research showed that the differentiation strategy is suitable for launching the dairy industry product innovation to a market.

“Valley co-creation” – exploring the emergence of a cultural product in an entrepreneur-driven value network: Case study: Black Weekend festival

The interconnected domains are attracting interest from industries and academia, although this phenomenon, called ‘convergence’ is not new. Organizational research has indeed focused on uncovering co-creation for manufacturing and the industrial organization, with limited implications to entrepreneurship. Although convergence has been characterized as a process connecting seemingly disparate disciplines, it is argued that these studies tend to leave the creative industries unnoticed. With the art market boom and new forms of collaboration riding past the institution-focused arts marketing literature, this thesis takes a leap to uncover the processes of entrepreneurship in the emergence of a cultural product. As a symbolic work of synergism itself, the thesis combines organizational theory with literature in natural sciences and arts. Assuming nonlinearity, a framework is created for analysing aesthetic experience in an empirical event where network actors are connected to multiple contexts. As the focal case in study, the empirical analysis performed for a music festival organized in a skiing resort in the French Alps in March. The researcher attends the festival and models its cocreation process by enquiring from an artist, festival organisers, and a festival visitor. The findings contribute to fields of entrepreneurship, aesthetics and marketing mainly. It is found that the network actors engage in intimate and creative interaction where activity patterns are interrupted and cultural elements combined. This process is considered to both create and destruct value, through identity building, legitimisation, learning, and access to larger audiences, and it is considered particularly useful for domains where resources are too restrained for conventional marketing practices. This thesis uncovered the role of artists and informants and posits that particularly through experience design, this type of skilled individual be regarded more often as a research informant. Future research is encouraged to engage in convergence by experimenting with different fields and research designs, and it is suggested that future studies could arrive at different descriptive results.

Product placement on personal blogs: a multiple case study from companies’ perspective

As traditional advertising is losing its value in corporations’ marketing, new and growing social media marketing channels are increasing their importance. The growing interest in the media and the lack of research on the subject create a clear need for this study. The objectives are to increase understanding about product placement in personal blogs and examine the benefits as well as the downsides created by this marketing channel and present the requirements for success. The study also takes a stand on what kind of things a successful product placement strategy in personal blogs includes and what points should be considered when creating a strategy. The study’s empirical part consists of seven thematic interviews with case companies’ representatives and one agent. The study’s personal blogs were delimited to consist only lifestyle and fashion blogs. The results show that product placement on personal lifestyle and fashion blogs is a strongly growing marketing channel and it is best suited to reach young women. It is also a very good channel to change and improve brand image. Via personal blogs it is possible to reach a large number of consumers with a very cost-efficient manner. Thus utilizing the channel is suitable for all companies regardless of the size of the marketing budget. Of course, companies have to consider the suitability of their product to the themes of blogs. Executing a successful campaign in this media requires good relationship management skills and understanding of this particular media as the final content is not in advertiser’s hands. As a marketing channel, personal blogs differ highly from traditional marketing channels because of their constantly changing nature and multidirectional quality where several parties are in interaction.

Machine vision methods for process measurements in pulping

The papermaking industry has been continuously developing intelligent solutions to characterize the raw materials it uses, to control the manufacturing process in a robust way, and to guarantee the desired quality of the end product. Based on the much improved imaging techniques and image-based analysis methods, it has become possible to look inside the manufacturing pipeline and propose more effective alternatives to human expertise. This study is focused on the development of image analyses methods for the pulping process of papermaking. Pulping starts with wood disintegration and forming the fiber suspension that is subsequently bleached, mixed with additives and chemicals, and finally dried and shipped to the papermaking mills. At each stage of the process it is important to analyze the properties of the raw material to guarantee the product quality. In order to evaluate properties of fibers, the main component of the pulp suspension, a framework for fiber characterization based on microscopic images is proposed in this thesis as the first contribution. The framework allows computation of fiber length and curl index correlating well with the ground truth values. The bubble detection method, the second contribution, was developed in order to estimate the gas volume at the delignification stage of the pulping process based on high-resolution in-line imaging. The gas volume was estimated accurately and the solution enabled just-in-time process termination whereas the accurate estimation of bubble size categories still remained challenging. As the third contribution of the study, optical flow computation was studied and the methods were successfully applied to pulp flow velocity estimation based on double-exposed images. Finally, a framework for classifying dirt particles in dried pulp sheets, including the semisynthetic ground truth generation, feature selection, and performance comparison of the state-of-the-art classification techniques, was proposed as the fourth contribution. The framework was successfully tested on the semisynthetic and real-world pulp sheet images. These four contributions assist in developing an integrated factory-level vision-based process control.

Service Productization and Product Servitization in The Contract Manufacturing Company

The role of contract manufacturing and subcontracting has been seen in black and white in product and service point of view. It used to be seen either as a product or a service. In the thesis product-service system, offering combining products and services, was discussed. Theory was created from two perspectives; Service productization via Business Model generation and product servitization via New Service Development process. Target for the case study was to point out new ways of service thinking and ways for changing business environment in contract manufacturing, especially in customer satisfaction and profitability point of view. The case study is following the New Service Development process phases. First ideas were collected from literature and via sales management interviews. Service offering and tool for service requirement evaluation was created. Last financial results of example service scenarios were calculated. It is recommended to take service offering into internal use and further develop it into modular service model. It is also recommended to take created customer service requirement evaluation tool into use for capturing customer service needs but also for communicating those internally.

Industrial solution business – transition from product to solution offering

The business logic in the manufacturing industry has changed in the 21st century. In the current industrial market, manufacturers are driven to provide more comprehensive offerings that go beyond the traditional product-orientation by providing capacity and availability for their customers. From incidental merchandise, services have become the core of manufacturers’ offerings with long-lasting service agreements over the life-cycles of their products. This change is driven both by the need of providers to grow and gain competitive advantage and by increased customer demand caused by customers’ outsourcing trends. The three key drivers for manufacturers’ service strategies are outsourcing trends, saturation of the installed base, and commoditization in product markets. Thus, manufacturers focus on providing industrial solutions which are delivered through relational processes with customers by using solution-driven business models. In the management of marketing activities, this can be regarded as closer customer relationships, service-dominant business logic, and collaboration in solving customers’ problems. However, there are few studies on comprehensive conceptualizations of a solution offering that include different elements and their roles, especially in the context of capital goods industry. Also the transition process needs further studies in a real life context. This study explores the transition process of an industrial company from product to solution business and, as an aid to managing the solution business, explicates the structure and management of an industrial solution offering. There are two themes, the industrial transition process and industrial solution offering. Regarding the industrial transition process, the aim is to understand the supplier view on the process and its execution and to determine the challenges related to the transition process. The industrial solution offering is discussed by its elements and characteristics, as well as management. Furthermore, a special type of build-own-operate-transfer business model is presented and its suitability in the industrial context analyzed. The study includes findings achieved by qualitative methods and from four case companies. Based on the results, it is tentatively suggested that in the industrial solution business, the transition from product to solution business is not a linear project but an evolving process that varies according to customer needs, which suggests that companies need to possess an ability to develop new business models for different customer needs. The industrial solution offering is dynamic as it evolves in collaboration according to the prevailing and latent customer needs, which suggest restructuring of the organization from a product-centric to a customer-centric one. Furthermore, based on the findings, the concept of industrial solutions is defined as an ongoing relational process to satisfy a customer’s particular business or operational requirements, and the concept of industrial solution offering as an entity comprising the customized goods, services, collaboration, and finance needed to fulfill the industrial solution. Finally, the study offers several managerial implications for industrial managers involved in the transition and management of the solution business and its offering.

Developing the Product Return Process of a Service Center With Lean Methods

Today lean-philosophy has gathered a lot of popularity and interest in many industries. This customer-oriented philosophy helps to understand customer’s value creation which can be used to improve efficiency. A comprehensive study of lean and lean-methods in service industry were created in this research. In theoretical part lean-philosophy is studied in different levels which will help to understand its diversity. To support lean, this research also presents basic concepts of process management. Lastly theoretical part presents a development model to support process development in systematical way. The empirical part of the study was performed by performing experimental measurements during the service center’s product return process and by analyzing this data. Measurements were used to map out factors that have a negative influence on the process flow. Several development propositions were discussed to remove these factors. Problems mainly occur due to challenges in controlling customers and due to the lack of responsibility and continuous improvement on operational level. Development propositions concern such factors as change in service center’s physical environment, standardization of work tasks and training. These factors will remove waste in the product return process and support the idea of continuous improvement.

The contributions of netnography in new product development

Netnography has been studying in various aspects (e.g. definitions of netnography, application of netngoraphy, conducting procedure…) within different industrial contexts. Besides, there are many studies and researches about new product development in various perspectives, such as new product development models, management of new product development project, or interaction between customers and new product design, and so on. However, the connection and the interaction between netnography and new product development have not been studied recently. This opens opportunities for the writer to study and explore unrevealed issues regarding to applying netnography in new product development. In term of the relation between netnography and new product development, there are numerous of matters need to be explored; for instance, the process of applying netnography in order to benefit to new product development, the involvement degree of netnography in new product development process, or eliminating useless information from netnography so that only crucial data is utilized, and so on. In this thesis, writer focuses on exploring how netnography is applied in new product development process, and what benefits netnography can contribute to the succeed of the project. The aims of this study are to understand how netnography is conducted for new product development purpose, and to analyse the contributions of netnography in the new product development process. To do so, a case-study strategy will be conducted with triple case studies. The case studies are chosen bases on many different criteria in order to select the most relevant cases. Eventually, the writer selected three case studies, which are Sunless tanning product project (HYVE), Listerine (NetBase), and Nivea co-creation and netnography in black and white deodorant. The case study strategy applied in this thesis includes four steps e.g. case selection, data collection, case study analysis, and generating the research outcomes from the analysis. This study of the contributions of netnography in the new product development process may be useful for the readers in many ways. It offers the fundamental knowledge of netnography market research method and basic understanding of new product development process. Additionally, it emphasizes the differences between netnography and other market research methods in order to explain the reasons why many companies and market research agents recently utilized netnography in their market research projects. Furthermore, it highlights the contributions of netnography in the new product development process in order to indicate the importance of netnography in developing new product. Thus, the potential readers of the study can be students, marketers, researchers, product developers, or business managers.

PDM system functions and utilizations analysis to improve efficiency of sheet metal product design and manufacturing

This study will concentrate on Product Data Management (PDM) systems, and sheet metal design features and classification. In this thesis, PDM is seen as an individual system which handles all product-related data and information. The meaning of relevant data is to take the manufacturing process further with fewer errors. The features of sheet metals are giving more information and value to the designed models. The possibility of implementing PDM and sheet metal features recognition are the core of this study. Their integration should make the design process faster and manufacturing-friendly products easier to design. The triangulation method is the basis for this research. The sections of this triangle are: scientific literature review, interview using the Delphi method and the author’s experience and observations. The main key findings of this study are: (1) the area of focus in triangle (the triangle of three different point of views: business, information exchange and technical) depends on the person’s background and their role in the company, (2) the classification in the PDM system (and also in the CAD system) should be done using the materials, tools and machines that are in use in the company and (3) the design process has to be more effective because of the increase of industrial production, sheet metal blank production and the designer’s time spent on actual design and (4) because Design For Manufacture (DFM) integration can be done with CAD-programs, DFM integration with the PDM system should also be possible.

How can we agree on some product agnostic repository function fundamentals?

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Software product line for power converters

Työn tilaajana toimi Visedo Oy. Työn tavoitteina oli tutkia Visedo Oy:n ohjelmistokehityksen nykytila, tunnistaa seuraavat parannuskohteet ja antaa ohjeita havaittujen parannuskohteiden korjaamiseksi. Visedo Oy:n tehonmuokkain ohjelmistokehityksen nykytilaa käsiteltiin neljän valitun osa-alueen näkökulmasta: ohjelmistoarkkitehtuurityyli, komponenttipohjainen ohjelmistokehitys, ohjelmistotuotelinjojen kehitysmenetelmät ja ohjelmistovariaatioiden hallinta. Valituilla osa-alueilla havaittujen parannuskohteiden perusteella annettiin korjausehdotuksia: ohjelmistoarkkitehtuurin rakenteeseen, komponenttien jakautumiselle, komponenttien koostamiselle ja komponenttien versioinnille. Lisäksi ehdotettiin uudenlaista ohjelmistotuotelinja rakennetta, joka yhdistää kerros- ja komponenttipohjaiset arkkitehtuurityylit mahdollistaen ominaisuuksiltaan eroavien tehonmuokkain ohjelmistojen hallinnan.