Development of Project Logistics in Engineering, Procurement and Construction Projects

The aim of this Master’s Thesis is to develop project logistics functions in large scale en-gineering, procurement and construction projects. The background of the research topic is compounded from two separate subjects; OPAL Program and case study of an actual EPC project. The purpose is to examine Project Logistics process in accordance with OPAL Program as well as logistics process in focus EPC project. Both entities are researched by using the case study research methodology. Logistics process of the focus EPC project is described as well as presented and in addi-tion, logistics related findings and observations are introduced. Significant findings and observations are found from logistics costs as well as shipment volume estimations in the early phase of the focus ECP project. A notable finding is also that because goods were transported as readily assembled as possible it caused expensive oversized cargo deliveries. From findings and observation of the focus EPC project it can be derived that logistics has to be involved in the early sales phase in order to receive more accurate logistics cost esti-mations for project deliveries. It is also noticed that in order to obtain savings in logistics costs, oversized deliveries must be avoided.

A modified nominal stress method for fatigue assessment of steel plates with thermally cut edges

Thermal cutting methods, are commonly used in the manufacture of metal parts. Thermal cutting processes separate materials by using heat. The process can be done with or without a stream of cutting oxygen. Common processes are Oxygen, plasma and laser cutting. It depends on the application and material which cutting method is used. Numerically-controlled thermal cutting is a cost-effective way of prefabricating components. One design aim is to minimize the number of work steps in order to increase competitiveness. This has resulted in the holes and openings in plate parts manufactured today being made using thermal cutting methods. This is a problem from the fatigue life perspective because there is local detail in the as-welded state that causes a rise in stress in a local area of the plate. In a case where the static utilization of a net section is full used, the calculated linear local stresses and stress ranges are often over 2 times the material yield strength. The shakedown criteria are exceeded. Fatigue life assessment of flame-cut details is commonly based on the nominal stress method. For welded details, design standards and instructions provide more accurate and flexible methods, e.g. a hot-spot method, but these methods are not universally applied to flame cut edges. Some of the fatigue tests of flame cut edges in the laboratory indicated that fatigue life estimations based on the standard nominal stress method can give quite a conservative fatigue life estimate in cases where a high notch factor was present. This is an undesirable phenomenon and it limits the potential for minimizing structure size and total costs. A new calculation method is introduced to improve the accuracy of the theoretical fatigue life prediction method of a flame cut edge with a high stress concentration factor. Simple equations were derived by using laboratory fatigue test results, which are published in this work. The proposed method is called the modified FAT method (FATmod). The method takes into account the residual stress state, surface quality, material strength class and true stress ratio in the critical place.

Construction de l'Est et de l'Ouest : vers des compétences interculturelles. Un exemple de recherche à Hong-Kong en situation de mobilité académique

Numerous scholars have already stressed the need to prepare students prior to academic mobility (Abdallah-Pretceille, 2003; Jackson, 2013, for example) in order to face hypermodernity (Aubert, 2004). As per the new mobilities paradigm (Urry, 2007), this implies considering individuals at the centre of political and institutional issues. Furthermore, the multiplicity of terminology of references towards academic mobility, and intercultural competences, justifies this research. The theory, for this doctoral dissertation, applies “renewed interculturality” (Dervin, 2012), a move away from a culturalist approach. Intercultural competences are therefore defined as a stepping back from discourses on the Other that may emerge during encounters. In order to collect the data, six focus groups have been organised with two batches of students from a Higher Education Institution in Hong-Kong, an “education hub” (Dervin & Machart, 2014) that is striving to be competitive particularly in increasing the number of incomingand outcoming students. Training and education to interculturality have been implemented prior to academic mobility in order to observe the impact on participants’ discourses before and after the mobility. Theories of enunciation and dialogism represent the methodology allowing us to compare and analyse the reported voices in the participants’ discourse and their prosodic realisation (Martin & White, 2005) before and after the experience of academic mobility. I have attempted to observe the dialogic space available to welcome the Other during encounters in the participants’ discourse. The results seem to underline the increased number of reported voices in participants’ discourse after study abroad, but as the space opened for negotiation is instable and depends on the interlocutors and the voices addressed, consequently, further research appears necessary to study the influences of a preparation prior to mobility on the contraction or expansion of heteroglossia. All in all, this doctoral dissertation aimed to renew preparation

Analysis and guidelines for implementation of EN 1090-2 Standard to assist execution class assignment of steel structures

Finnish design and consulting companies are delivering robust and cost-efficient steel structures solutions to a large number of manufacturing companies worldwide. Recently introduced EN 1090-2 standard obliges these companies to specify the execution class of steel structures for their customers. This however, requires clarifying, understanding and interpreting the sophisticated procedure of execution class assignment. The objective of this research is to provide a clear explanation and guidance through the process of execution class assignment for a given steel structure and to support the implementation of EN 1090-2 standard in Rejlers Oy, one of Finnish design and consulting companies. This objective is accomplished by creating a guideline for designers that elaborates on the four-step process of the execution class assignment for a steel structure or its part. Steps one to three define the consequence class (projected consequences of structure failure), the service category (hazards associated with the service use exploitation of steel structure) and the production category (manufacturing process peculiarities), based on the ductility class (capacity of structure to withstand deformations) and the behaviour factor (corresponds to structure seismic behaviour). The final step is the execution class assignment taking into account results of previous steps. Main research method is indepth literature review of European standards family for steel structures. Other research approach is a series of interviews of Rejlers Oy representatives and its clients, results of which have been used to evaluate the level of EN 1090-2 awareness. Rejlers Oy will use the developed novel coherent standard implementation guideline to improve its services and to obtain greater customer satisfaction.

The Construction of ‘Disciplinary’ Violence Against Children — Social Workers’, Police Officers’ and Parents’ Rationales

This dissertation examines parental disciplinary violence against children in authority records and in the criminal procedure in Finland. The main aim is to analyze disciplinary violence, how it is defined, and how it is constructed as a crime by social workers, the police, and parents. This dissertation consists of four sub-studies and a summary article. In the first sub-study, I examine how disciplinary violence appears in child welfare documents and analyze the decision-making processes and measures taken by the child welfare workers. The second sub-study, utilizing police interview data, examines police officers’ perceptions of disciplinary violence, its criminalization, and its investigation. In addition to this analysis of police officers’ own perceptions, in the third sub-study, I use reports of crime and pre-trial investigation documents to look at what a typical suspicion of disciplinary violence coming to the attention of the police is and examine the decision-making processes of the police. Utilizing authority data, the fourth sub-study analyzes how parents rationalize the use of disciplinary violence to the authorities investigating these suspicions. The research provides findings that are unprecedented in Finland. Firstly, it was shown that social workers’ decision-making processes in suspicions of disciplinary violence follow three pathways of reasoning, with many factors taken into consideration; and in less than one-third of the cases, a request for criminal investigation has been made to the police. Secondly, it was verified that police officers hold different perceptions of disciplinary violence, and these perceptions have multiple effects on the investigation of these cases and the construction of disciplinary violence as a crime. Thirdly, the analysis of the reports of crime and pre-trial investigation documents showed that almost two-thirds of the cases of disciplinary violence had been sent to a prosecutor by the police and, thus, defined as a crime. However, in many cases, acts of disciplinary violence were often seen as ‘educational, petty one-off incidents’ and a possible trial and punishment for the perpetrator were seen as unreasonable. Fourthly, it was found that parents often try to neutralize and rationalize the violence they have used against their children, for example, either by denying the victim, the criminal intent, or the entire act, or relying on the necessity of the forbidden act. The dissertation concludes that disciplinary violence is defined and constructed in authority policies and practices, first and foremost, by the severity of the act, the nature of the act as continuous or singular, the perceived harm caused by the act to a child, and the perceptions of authorities regarding physical punishment of children. The asymmetrical power setting present in disciplinary violence and parents’ legitimized right to raise and discipline their children partly seem to explain why criminal-law processing of these suspicions of violence and understanding these as crimes is difficult. Finally, this research calls for more coherent and consistent authority practices and policies, achieved by educating authorities and increasing awareness on disciplinary violence, questions the need for a concept like ‘disciplinary’ violence, and suggests more emphasis on unambiguous perceptions of a child’s best interest.

Hitsatun alumiinirakenteen suunnittelu

Alumiiniseosten käyttö konstruktiomateriaalina lisääntyy johtuen sen lukuisista variaatioista lujuuden ja muovattavuuden suhteen. Alumiinin keveys on merkittävä kilpailuetu teräkseen nähden. Alumiiniseosten hitsattavuus on parantunut hitsausmenetelmien kehittyessä. Uusilla menetelmillä lämmöntuontia hallitaan paremmin, kuten myös alumiinin huokoisuutta sekä lujuuden laskua hitsauksen yhteydessä. Tässä diplomityössä tutkitaan alumiinin metallurgiaa, hitsausmenetelmiä, sekä alumiinin ja teräksen sekaliitoksen toteutusta. Tutkimuksella pyritään tekemään hitsatun alumiinirakenteen suunnittelua ymmärrettävämmäksi. SFS-EN standardit antavat perustuksen alumiinirakenteen suunnittelulle. Tässä diplomityössä tehdään suunnitteluesimerkki hitsatun alumiinirakenteen hitsien suunnittelusta. Suunnitteluesimerkissä tutkitaan alumiiniseoksen lujuuden laskua hitsattaessa, ja etsitään standardien antamia ratkaisuja toimivan hitsatun rakenteen toteuttamiseksi.

The Formation Of Internationalization Strategies Within The Construction Industry:Vision and Strategy

Internationalization represents a complex topic that has been researched for quite some time. However, since it continues to be extremely current a topic, its significance has not diminished, but maybe even increased in importance. Companies today face extreme pressure to enter new markets in the hope of growing, becoming more profitable, increasing market share, attracting new customers and meeting the requirements of its share- and stakeholders. In the increasingly global business environment of today, companies are facing both challenges and possible advantages of internationalization. Few companies are not operating internationally and it is becoming the question of ‘Why not?’ rather than ‘Why?’ to internationalize business operations. Internationalization and the importance of strategy are discussed in this research from the viewpoint of three case companies that were interviewed about internationalization strategies. This research project is a qualitative study that answers the research question of How is a business strategy constructed for entering a new market? The sub-questions are • How are goals set and what indicators are used to monitor the achievement of these goals? • What are the key characteristics of a strategy implementation process? The research method chosen for this study is a multiple-case study. Three case companies were chosen for the interviews in order to gain in-depth data of internationalization strategies within the construction industry.

Effect of loading type on the fatigue strength of symmetric and asymmetric welded joints made of ultra high strength steel

In this study, finite element analyses and experimental tests are carried out in order to investigate the effect of loading type and symmetry on the fatigue strength of three different non-load carrying welded joints. The current codes and recommendations do not give explicit instructions how to consider degree of bending in loading and the effect of symmetry in the fatigue assessment of welded joints. The fatigue assessment is done by using effective notch stress method and linear elastic fracture mechanics. Transverse attachment and cover plate joints are analyzed by using 2D plane strain element models in FEMAP/NxNastran and Franc2D software and longitudinal gusset case is analyzed by using solid element models in Abaqus and Abaqus/XFEM software. By means of the evaluated effective notch stress range and stress intensity factor range, the nominal fatigue strength is assessed. Experimental tests consist of the fatigue tests of transverse attachment joints with total amount of 12 specimens. In the tests, the effect of both loading type and symmetry on the fatigue strength is studied. Finite element analyses showed that the fatigue strength of asymmetric joint is higher in tensile loading and the fatigue strength of symmetric joint is higher in bending loading in terms of nominal and hot spot stress methods. Linear elastic fracture mechanics indicated that bending reduces stress intensity factors when the crack size is relatively large since the normal stress decreases at the crack tip due to the stress gradient. Under tensile loading, experimental tests corresponded with finite element analyzes. Still, the fatigue tested joints subjected to bending showed the bending increased the fatigue strength of non-load carrying welded joints and the fatigue test results did not fully agree with the fatigue assessment. According to the results, it can be concluded that in tensile loading, the symmetry of joint distinctly affects on the fatigue strength. The fatigue life assessment of bending loaded joints is challenging since it depends on whether the crack initiation or propagation is predominant.