Kysyntä-toimitusketjun synkronointi epävarman kysynnän ja tarjonnan toimintaympäristössä

Kysynnän ja tarjonnan epävarmuudet ovat nykyisin arkipäivää useilla toimialoilla. Elämme epävarmuuden suhteen ennen näkemättömiä aikoja, minkä on arvioitu jatkuvan myös tulevaisuudessa. Yritysten tilauskannat ovat lyhyitä, ja tilaukset viivästyvät tai peruuntuvat kokonaan. Toisaalta tarjonnan epävarmuudet aiheuttavat asiakasyrityksille haasteita esimerkiksi toimitusmyöhästymisten muodossa. Tuotannon ollessa hajaantunut verkostoihin yksittäisten yritysten toiminta ja päätökset vaikuttavat toisten verkostoyritysten toimintaan. Tämän takia epävarmuuden aiheuttamista muutoksista ja poikkeamista tulisi tiedottaa kumppaniyrityksiä, jotta kaikki pysyisivät samalla kellotaajuudella. Operatiivisen ja taktisen tiedon jakaminen on nykyisissä toimitusketjuissa jo arkipäivää, mutta yritysten välisistä rajapinnoista löytyy edelleen kehitettävää. Riittävästä ei kiinnitetä huomiota vastaanottajan kykyyn ja tapaan hyödyntää informaatiota – varsinkaan muutostilanteissa. Ajan/nopeuden ollessa yhä tärkeämpi kilpailutekijä informaation ajoituksella on kriittinen merkitys kysyntä-toimitusketjujen kokonaissuorituskykyyn. Toisin sanoen, millä ajanhetkellä tietoa tulisi jakaa, jotta kumppani pystyisi hyödyntämään saamaansa tietoa mahdollisimman hyvin. Kysyntä-toimitusketjun synkronoinnilla tarkoitetaan tässä väitöstutkimuksessa nimenomaan aikatekijään keskittymistä yritysten välisessä päätöksenteossa ja informaation jakamisessa toimitusketjun kokonaissuorituskyvyn parantamiseksi. Tutkimus kytkeytyy toimitusketjukoordinoinnin tieteelliseen keskusteluun. Koordinointiteorian keskeinen osa ovat riippuvuussuhteet, joita johdetaan koordinointimekanismien avulla. Kysyntätoimitusketjun synkronointia on mallinnettu aikaisemmin VOP-OPP-mallin (Value Offering Point – Order Penetration Point) ja sen johdannaisten avulla. Näissä malleissa asiakasyrityksen kysyntäketju ja toimittajayrityksen toimitusketju ovat keskinäisessä riippuvuussuhteessa, jota johdetaan päätöksenteon synkronoinnin ja informaation jakamisen koordinointimekanismeilla. VOP-OPP-malli johdannaisineen eivät kuitenkaan huomioi epävarman toimintaympäristön vaikutuksia synkronointiin. Näissä malleissa informaation ainoana laatudimensiona tarkasteltava aikatekijä on liian kapea-alainen näkökulma synkronointiin epävarmassa ympäristössä. Lisäksi nämä mallit keskittyvät vain yksisuuntaiseen, kysyntälähtöiseen, synkronointiin jättäen huomioimatta tarjontalähtöisen synkronoinnin. Aikatekijä- ja kokonaissuorituskykypainotustensa takia VOP-OPP-malli tarjosi kuitenkin hyvän lähtöfilosofian uusien synkronointimallien kehittämiseen. Väitöstutkimus toteutettiin hypoteettis-deduktiivisena tapaustutkimuksena, jossa ensin luotiin kirjallisuuden perusteella uudet teoreettiset synkronointimalliehdotukset. Tämän jälkeen ehdotusten toimivuutta arvioitiin käytännön kysyntä-toimitusketjuissa. Tutkimuksen uutuusarvo liittyy kysyntä-toimitusketjun synkronoinnin keskeisten piirteiden systeemiseen mallintamiseen epävarmassa toimintaympäristössä. Kontribuutiona esitetään kysyntä-toimitusketjun synkronoinnin moniulotteinen kokonaismalli, joka sisältää koordinointimekanismeina päätöksenteon synkronoinnin, informaation läpinäkyvyyden sekä asiakas- ja toimittajapään joustot. Tiedon vaihtoa mallissa tarkastellaan kaksisuuntaisesti – kysyntä- ja tarjontalähtöisesti. Informaation laatudimensioina mallissa ovat informaation ajoitus, luotettavuus ja tarkkuus. Kokonaismalli sisältää kolme alimallia: Demand Visibility Point – Demand Penetration Point (DVP-DPP) on kysyntälähtöisen synkronoinnin malli, Supply Visibility Point – Supply Information Penetration Point (SVP-SIPP) on tarjontalähtöisen synkronoinnin malli ja Integroitu DVP-DPP - SVP-SIPP-malli kytkee edellä mainitut mallit toisiinsa. Näissä alimalleissa informaation eri luokkia ovat tilausta edeltävä, tilaukseen liittyvä, tilauksen jälkeinen ja sovitun toimitusajankohdan jälkeinen kysyntä- ja tarjontatieto. Käytännön hyödyntämisen näkökulmasta mallit toimivat ns. mentaalitason koordinointimekanismeina, joiden tarkoitus on herättää toimitusketjukumppanit tavoittelemaan kokonaissuorituskyvyn parantamista oman edun tavoittelemisen sijasta. Tutkimuksen päärajoitteena on sen keskittyminen ainoastaan kahdenvälisiin yhteistyösuhteisiin, mikä tarjoaa nykyisessä verkostoituneessa toimintaympäristössä varsin kapean kuvan käytännön synkronointihaasteisiin.

Supplier codes of conduct: Acting responsibly in global supply chains

Nowadays the Western companies are considered responsible for the social and environmental issues in their whole supply chains. To influence the practices of their suppliers the Western companies have created suppliers codes of conduct (SCCs) which express their requirements. Suppliers’ compliance with the SCCs is checked through audits. The purpose of this thesis is to analyze SCCs as a means for Western companies to ensure socially and environmentally responsible actions in their global supply chains, and the sub-objectives are to find out 1) how well do the SCCs and their auditing work at suppliers’ production sites and 2) how can possible problems related to SCCs and their auditing be solved. This is a qualitative research carried out in the form of a case study with two case companies. In this study both primary and secondary data is used. The primary data is collected in the form of interviews of the case company representatives and three external experts. Based on a theoretical framework of previous research in the fields of corporate social responsibility and supply chain management, a model with eleven factors, which influence the success of SCC implementation and the auditing of SCC –implementation, is drafted. Also several different best-practices to help to solve and avoid possible problems related to SCC -implementation and auditing have been identified from previous research. Based on the findings of this study the theoretical model has been updated adding two new influential factors. It seems that how well the SCC and its auditing work at suppliers’ production sites depends on the joint effect of thirteen influential factors: buyer’s purchasing policy, supplier’s motivation, buyer’s commitment, the solving of agency problems, the contents of the SCC, supplier’s role and the buyer-supplier –relationship, complexity of supply chain, the limitations of the smaller buyers, cooperation through a business association or multi-stakeholder system, the role of supplier’s employees, SCC –related communication and supplier’s understanding, cheating in audits and the auditors. The possible problems related to SCCs and their auditing can be solved by adopting best-practices. Nine of the theoretical best-practices stand out from the findings of this study: 1) two-way communication and collecting feedback from suppliers, 2) the philosophy of continuous improvement, 3) long-term business relationships with the supplier, 4) informing the supplier about the advantages of SCC –compliance, 5) rewarding code-compliant suppliers, 6) building collaborative, good buyer-supplier relationships, 7) supporting and advising the supplier, 8) joining a business association or multi-stakeholder system and 9) interviewing supplier’s employees as a part of the audits.

Interfirm Information System for Supply Chain Management from the Cloud: An Exploratory Case Study from the Telecom Industry

This study examines the practice of supply chain management problems and the perceived demand information distortion’s (the bullwhip effect) reduction with the interfirm information system, which is delivered as a cloud service to a company operating in the telecommunications industry. The purpose is to shed light in practice that do the interfirm information system have impact on the performance of the supply chain and in particularly the reduction of bullwhip effect. In addition, a holistic case study of the global telecommunications company's supply chain is presented and also the challenges it’s facing, and this study also proposes some measures to improve the situation. The theoretical part consists of the supply chain and its management, as well as increasing the efficiency and introducing the theories and related previous research. In addition, study presents performance metrics for the bullwhip effect detection and tracking. The theoretical part ends in presenting cloud -based business intelligence theoretical framework used in the background of this study. The research strategy is a qualitative case study, supported by quantitative data, which is collected from a telecommunication sector company's databases. Qualitative data were gathered mainly with two open interviews and the e-mail exchange during the development project. In addition, other materials from the company were collected during the project and the company's web site information was also used as the source. The data was collected to a specific case study database in order to increase reliability. The results show that the bullwhip effect can be reduced with the interfirm information system and with the use of CPFR and S&OP models and in particularly combining them to an integrated business planning. According to this study the interfirm information system does not, however, solve all of the supply chain and their effectiveness -related problems, because also the company’s processes and human activities have a major impact.

Treatment of Fe-containing Acid Mine Waters in Fixed Bed Adsorption Column with Calcite Side-Stone

The acid mining drainage is considered the most significant environmental pollution problem around the world for the extensive formation acidic leachates containing heavy metals. Adsorption is widely used methods in water treatment due to it easy operation and the availability of a wide variety of commercial adsorbent (low cost). The primary goal of this thesis was to investigate the efficiency of neutralizing agents, CaCO3 and CaSiO3, and metal adsorption materials with unmodified limestone from Company Nordkalk Oy. In addition to this, the side materials of limestone mining were tested for iron adsorption from acidic model solution. This study was executed at Lappeenranta University of Technology, Finland. The work utilised fixed-bed adsorption column as the main equipment and large fluidized column. Atomic absorption spectroscopy (AAS) and x-ray diffraction (XRD) was used to determine ferric removal and the composition of material respectively. The results suggest a high potential for the studied materials to be used a low cost adsorbents in acid mine drainage treatment. From the two studied adsorbents, the FS material was more suitable than the Gotland material. Based on the findings, it is recommended that further studies might include detailed analysis of Gotland materials.

e-Business and collaboration: A case study of pulp supply chain

This thesis studies how the case company could digitalize its supply chain and what kind of advantages this would create in the light of supply chain efficiency. The case company manufactures several pulp products that are used for paper, fabrics and packaging products by customers worldwide. The paper and pulp industry has been paying more and more attention to increasing supply chain efficiency with new operating and service models made possible by today’s information technology. The main focus of this study is on the supply chain between the case company and its key customers and the goal is to find ways to make the operations between them as efficient as possible. The study relays heavily on collaboration techniques and digitalization technologies. In addition to a theoretical framework, the study includes several empirical studies that offer real-life examples of how these theories and technologies are applied in operating environments similar to the case company. A plan with strategic and operational levels is created according to the findings of the previous sections to support the case company’s future operations. The plan is based on an RFID-supported collaboration model that aims to advance information sharing between the supply chain partners. The time for an RFID-investment is sought to be very optimal and the benefits of such system to be noteworthy, but challenging to measure in monetary terms.

The radio frequency identification technology in the supply chain management: a case of a big logistics company

Nowadays global business trends force the adoption of innovative ICTs into the supply chain management (SCM). Particularly, the RFID technology is on high demand among SCM professionals due to its business advantages such as improving of accuracy and veloc-ity of SCM processes which lead to decrease of operational costs. Nevertheless, a question of the RFID technology impact on the efficiency of warehouse processes in the SCM re-mains open. The goal of the present study is to experiment the possibility of improvement order picking velocity in a warehouse of a big logistics company with the use of the RFID technology. In order to achieve this goal the following objectives have been developed: 1) Defining the scope of the RFID technology applications in the SCM; 2) Justification of the RFID technology impact on the SCM processes; 3) Defining a place of the warehouse order picking process in the SCM; 4) Identification and systematization of existing meth-ods of order picking velocity improvement; 5) Choosing of the study object and gathering of the empirical data about number of orders, number of hours spent per each order line daily during 5 months; 6) Processing and analysis of the empirical data; 7) Conclusion about the impact of the RFID technology on the speed of order picking process. As a result of the research it has been found that the speed of the order picking processes has not been changed as time has gone after the RFID adoption. It has been concluded that in order to achieve a positive effect in the speed of order picking process with the use of the RFID technology it is necessary to simultaneously implement changes in logistics and organizational management in 3PL logistics companies. Practical recommendations have been forwarded to the management of the company for further investigation and procedure.

The demand-supply balancing process in supply chain management - case mining & metals industry equipment

The aim of this thesis is to search how to match the demand and supply effectively in industrial and project-oriented business environment. The demand-supply balancing process is searched through three different phases: the demand planning and forecasting, synchronization of demand and supply and measurement of the results. The thesis contains a single case study that has been implemented in a company called Outotec. In the case study the demand is planned and forecasted with qualitative (judgmental) forecasting method. The quantitative forecasting methods are searched further to support the demand forecast and long term planning. The sales and operations planning process is used in the synchronization of the demand and supply. The demand forecast is applied in the management of a supply chain of critical unit of elemental analyzer. Different meters on operational and strategic level are proposed for the measurement of performance.

Reporting of Green Supply Chain Management and Industrial Symbiosis

The purpose of this thesis is to examine how the reporting of operations related to green supply chain management and industrial symbiosis has evolved in UPM, Fortum and Kemira within the last ten years. The focus is on the improved operations, which are studied based on annual reports of these companies. The study provides a deeper understanding of the nature of green supply chain management and industrial symbiosis as well as the possibilites that their combination offers. The research is part of the DemaNET research project The study indicates that the environmental regulations and reporting standards have forced the studied companies to report their operations related to green supply chain management and industrial symbiosis more in detail during the last ten years. The operations related to green supply chain management in the studied companies are more common compared to operations related to industrial symbiosis. Often these two operations were also partially integrated, indicating a hybrid model. Even though firms often used hybrid models they still focused mainly on greening the internal operations rather than finding alternative ways for symbiosis outside the organization. The integration of green supply chain management and industrial symbiosis is most likely to occur when mutually beneficial relationships align the interests of all parties, thus resulting in the co-creation of value. The findings suggest that identifying mutual benefits and the flow of by-products are the ones that companies should give more attention to.

Supply base development for life-cycle business

Yritysten liiketoimintamallit ovat jatkuvan kehityksen kohteena. Viimeisinä vuosina valmistavien yhtiöiden kiinnostus huolehtia asiakkaistaan koko tuotteen elinkaaren aikana ja tarjota erilaisia palveluita asiakkailleen on kasvanut. Tämän palvelujen laajentumisen myötä myös vaateet yrityksen omaa toimittajakenttää kohtaan ovat muuttuneet. Yritykset eivät kykene tuottamaan kaikkia tuotteistamiaan palveluja itse, jolloin yrityksen toimittajakenttä ja sen kyvykkyydet tuottaa tarvittavia palveluita ovat avainasemassa yrityksen menestystekijänä. Tämän työn teoriaosuudessa on esitelty toimittajakentän hallinnan perusteorioita. Kirjallisuus osuuden lisäksi työssä on hyödynnetty toimintatutkimusta kohdeyrityksessä. Tässä diplomityössä on tutkittu mahdollisia keinoja kehittää organisaation omaa toimintaa ja sekä yrityksen toimittajakenttää niin, että se tukee liiketoimintamallin kehitystä koneenrakennusyrityksestä kohti elinkaariliiketoimintaa. Työssä esitetyt keinot voidaan ottaa käyttöön, joko yksitellen tai kokonaisuutena.