The Design of a Software Lifecycle Management Framework to a Configuration Management System

Keeping track of software assets and managing software installations in IT environments can be a hard endeavor, especially when the size and diversity of the environment grows. How to install and uninstall software efficiently and cost effectively? Are there too few or too many software licenses purchased? If installed, is the software actually in use? Software Asset Management (SAM) is a process that involves managing and optimizing the purchase, deployment, maintenance, utilization, and disposal of software applications within an organization. This master’s thesis describes a special Software Lifecycle Management Framework to provide solutions to the multitude of challenges within SAM. The main objectives when designing the framework was to provide a set of tools to control the software assets during their entire lifecycle while trying to minimize the costs related to owning and managing them.

Sähköurakoitsijan langattoman mobiiliratkaisun sunnittelu ja toteuttaminen

Kandidaatintyön tavoitteena on suunnitella ja toteuttaa tehokkaampi ajanhallintajärjestelmä sähköalan yritykseen. Ajanhallinnan tehostaminen oli tarkoitus saavuttaa siirtämällä työtuntien seuranta paperilomakkeiden käytöstä sähköiseen tietokantaan johon syötetään tiedot langattomilla päätelaitteilla. Päätelaitteiksi valittiin kämmentietokoneet jotka käyttävät tiedonsiirtoon langatonta lähiverkkoa ja yrityksen ulkopuolella GSMkännykkäverkon datasiirto-ominaisuuksia. Ohjelmisto koottiin useista eri sovelluskomponenteista Groupware-ohjelmistopaketin käyttämisen sijaan. Useiden eri sovellusten käyttö osoittautui virheeksi koska näiden erilaiset käyttöliittymät ja vaihtelevat ominaisuudet hankaloittivat käyttöä. Työn tehokkuutta mitattaessa havaittiin että järjestelmän käyttöönotto oli lisännyt ajanhallintaan liittyvien tehtävien pituutta eikä tehostanut niitä. Tämä johtuu osittain useiden eri sovellusten käytöstä ja niiden ominaisuuksien puutteista.

Eliminating Software Failures - A Literature Survey

Software faults are expensive and cause serious damage, particularly if discovered late or not at all. Some software faults tend to be hidden. One goal of the thesis is to figure out the status quo in the field of software fault elimination since there are no recent surveys of the whole area. Basis for a structural framework is proposed for this unstructured field, paying attention to compatibility and how to find studies. Bug elimination means are surveyed, including bug knowhow, defect prevention and prediction, analysis, testing, and fault tolerance. The most common research issues for each area are identified and discussed, along with issues that do not get enough attention. Recommendations are presented for software developers, researchers, and teachers. Only the main lines of research are figured out. The main emphasis is on technical aspects. The survey was done by performing searches in IEEE, ACM, Elsevier, and Inspect databases. In addition, a systematic search was done for a few well-known related journals from recent time intervals. Some other journals, some conference proceedings and a few books, reports, and Internet articles have been investigated, too. The following problems were found and solutions for them discussed. Quality assurance is testing only is a common misunderstanding, and many checks are done and some methods applied only in the late testing phase. Many types of static review are almost forgotten even though they reveal faults that are hard to be detected by other means. Other forgotten areas are knowledge of bugs, knowing continuously repeated bugs, and lightweight means to increase reliability. Compatibility between studies is not always good, which also makes documents harder to understand. Some means, methods, and problems are considered method- or domain-specific when they are not. The field lacks cross-field research.

RTOS Framework for Real-Time Control System

This thesis is done as a complementary part for the active magnet bearing (AMB) control software development project in Lappeenranta University of Technology. The main focus of the thesis is to examine an idea of a real-time operating system (RTOS) framework that operates in a dedicated digital signal processor (DSP) environment. General use real-time operating systems do not necessarily provide sufficient platform for periodic control algorithm utilisation. In addition, application program interfaces found in real-time operating systems are commonly non-existent or provided as chip-support libraries, thus hindering platform independent software development. Hence, two divergent real-time operating systems and additional periodic extension software with the framework design are examined to find solutions for the research problems. The research is discharged by; tracing the selected real-time operating system, formulating requirements for the system, and designing the real-time operating system framework (OSFW). The OSFW is formed by programming the framework and conjoining the outcome with the RTOS and the periodic extension. The system is tested and functionality of the software is evaluated in theoretical context of the Rate Monotonic Scheduling (RMS) theory. The performance of the OSFW and substance of the approach are discussed in contrast to the research theme. The findings of the thesis demonstrates that the forged real-time operating system framework is a viable groundwork solution for periodic control applications.

International Partner Management in the Software Industry

The purpose of this research is to describe how the scope of internationalization affects partner management in software companies. The effects are analyzed separately for small and large companies. Partner management is described from three perspectives: who should manage partnerships, how they should be managed and how does the context affect the choice of management style. Inductive case study is selected as research design. Eventually four case companies are chosen. The findings reveal that the size of the company affects the volume whereas the scope of internationalization affects the choice of partner management activities. Companies with high scope of internationalization required a more formal yet flexible management system whereas companies with low scope of internationalization relied more on the informal relations and personal management.

Real-Time Simulation of Mobile and Industrial Machines Using the Multibody Simulation Approach

This thesis introduces a real-time simulation environment based on the multibody simulation approach. The environment consists of components that are used in conventional product development, including computer aided drawing, visualization, dynamic simulation and finite element software architecture, data transfer and haptics. These components are combined to perform as a coupled system on one platform. The environment is used to simulate mobile and industrial machines at different stages of a product life time. Consequently, the demands of the simulated scenarios vary. In this thesis, a real-time simulation environment based on the multibody approach is used to study a reel mechanism of a paper machine and a gantry crane. These case systems are used to demonstrate the usability of the real-time simulation environment for fault detection purposes and in the context of a training simulator. In order to describe the dynamical performance of a mobile or industrial machine, the nonlinear equations of motion must be defined. In this thesis, the dynamical behaviour of machines is modelled using the multibody simulation approach. A multibody system may consist of rigid and flexible bodies which are joined using kinematic joint constraints while force components are used to describe the actuators. The strength of multibody dynamics relies upon its ability to describe nonlinearities arising from wearing of the components, friction, large rotations or contact forces in a systematic manner. For this reason, the interfaces between subsystems such as mechanics, hydraulics and control systems of the mechatronic machine can be defined and analyzed in a straightforward manner.

GPRS/EDGE Session Tracing and Analysis in Abis and AGPRS Interfaces

Efficient problem solving in cellular networks is important when enhancing the network performance and liability. Analysis of calls and packet switched sessions in protocol level between the network elements is an important part of this process. They can provide very detailed information about error situations which otherwise would be difficult to recognise. In this thesis we seek solutions for monitoring GPRS/EDGE sessions in two specific interfaces simultaneously in such manner that all information important to the users will be provided in easily understandable form. This thesis focuses on Abis and AGPRS interfaces of GSM radio network and introduces a solution for managing the correlation between these interfaces by using signalling messages and common parameters as linking elements. ~: Finally this thesis presents an implementation of GPRS/EDGE session monitoring application for Abis and AGPRS interfaces and evaluates its benefits to the end users. Application is implemented as a part of Windows based 3G/GSM network analyser.

Groupware and Workflow Tools - A Case study of SAP Business Workflow Supporting System Integration in a Global Telecommunication Company

Workflow management systems aim at the controlled execution of complex application processes in distributed and heterogeneous environments. These systems will shape the structure of information systems in business and non-business environments. E business and system integration is a fertile soil for WF and groupware tools. This thesis aims to study WF and groupware tools in order to gather in house knowledge of WF to better utilize WF solutions in future, and to focus on SAP Business Workflow in order to find a global solution for Application Link Enabling support for system integration. Piloting this solution in Nokia collects the experience of SAP R/3 WF tool for other development projects in future. The literary part of this study will guide to the world of business process automation providing a general description of the history, use and potentials of WF & groupware software. The empirical part of this study begins with the background of the case study describing the IT environment initiating the case by introducing SAP R/3 in Nokia, the communication technique in use and WF tool. Case study is focused in one solution with SAP Business Workflow. This study provides a concept to monitor communication between ERP systems and to increase the quality of system integration. Case study describes a way create support model for ALE/EDI interfaces. Support model includes monitoring organization and the workflow processes to solve the most common IDoc related errors.

Introducing Continuous Integration for C and C++ Software Development Projects on Linux Platform

Software integration is a stage in a software development process to assemble separate components to produce a single product. It is important to manage the risks involved and being able to integrate smoothly, because software cannot be released without integrating it first. Furthermore, it has been shown that the integration and testing phase can make up 40 % of the overall project costs. These issues can be mitigated by using a software engineering practice called continuous integration. This thesis work presents how continuous integration is introduced to the author's employer organisation. This includes studying how the continuous integration process works and creating the technical basis to start using the process on future projects. The implemented system supports software written in C and C++ programming languages on Linux platform, but the general concepts can be applied to any programming language and platform by selecting the appropriate tools. The results demonstrate in detail what issues need to be solved when the process is acquired in a corporate environment. Additionally, they provide an implementation and process description suitable to the organisation. The results show that continuous integration can reduce the risks involved in a software process and increase the quality of the product as well.

Quality standards in e-business software development

Large enterprises have for many years employed eBusiness solutions in order to improve their efficiency. Smaller companies, however, have not been able to leverage these technologies due to the high level of know-how and resources required in implementing them. To solve this, novel software services are being developed to facilitate eBusiness adoption for the small enterprise with the aim of making B2Bi feasible not only between large organisations but also between trading partners of all sizes. The objective of this study was to find what standards and techniques on eBusiness and software testing and quality assurance fit best for building these new kinds of software considering the requirements their unique eBusiness approach poses. The research was conducted as a literature study with focus on standards on software testing and quality assurance together with standards on eBusiness. The study showed that the current software testing and quality assurance standards do not possess such characteristics as would make select standards evidently better fitted for building this type of software, which were established to be best developed as web services in order for them to meet their requirements. A selection of eBusiness standards and technologies was proposed to support this approach. The main finding in the study was, however, that these kinds of web services that have high interoperability requirements will have to be able to carry out automated interoperability and conformance testing as part of their operation; this objective dictates how the software are built and how testing during software development is to be done. The study showed that research on automated interoperability and conformance testing for web services is still limited and more research is needed to make the building of highly-interoperable web services more feasible.

Challenges and Means for the Front End Activities of Software Development

The front end of innovation is regarded as one of the most important steps in building new software products or services, and the most significant benefits in software development can be achieved through improvements in the front end activities. Problems in the front end phase have an impact on customer dissatisfaction with delivered software, and on the effectiveness of the entire software development process. When these processes are improved, the likelihood of delivering high quality software and business success increases. This thesis highlights the challenges and problems related to the early phases of software development, and provides new methods and tools for improving performance in the front end activities of software development. The theoretical framework of this study comprises two fields of research. The first section belongs to the field of innovation management, and especially to the management of the early phases of the innovation process, i.e. the front end of innovation. The second section of the framework is closely linked to the processes of software engineering, especially to the early phases of the software development process, i.e. the practice of requirements engineering. Thus, this study extends the theoretical knowledge and discloses the differences and similarities in these two fields of research. In addition, this study opens up a new strand for academic discussion by connecting these research directions. Several qualitative business research methodologies have been utilized in the individual publications to solve the research questions. The theoretical and managerial contribution of the study can be divided into three areas: 1) processes and concepts, 2) challenges and development needs, and 3) means and methods for the front end activities of software development. First, the study discloses the difference and similarities between the concepts of the front end of innovation and requirements engineering, and proposes a new framework for managing the front end of the software innovation process, bringing business and innovation perspectives into software development. Furthermore, the study discloses managerial perceptions of the similarities and differences in the concept of the front end of innovation between the software industry and the traditional industrial sector. Second, the study highlights the challenges and development needs in the front end phase of software development, especially challenges in communication, such as linguistic problems, ineffective communication channels, a communication gap between users/customers and software developers, and participation of multiple persons in software development. Third, the study proposes new group methods for improving the front end activities of software development, especially customer need assessment, and the elicitation of software requirements.

Improving and User Interface to E-Procurement Software Used in Asset Accounting and Investigating Effects to Efficiency

This diploma thesis has been done to international organization which takes care from the accounting actions of two major companies. In this organization are used three different purchasing tools which are used when new asset master data is wanted to input to SAP R/3- system. The aim of this thesis is to find out how much changing the user interface of one of these three e-procurement programs will affect to overall efficiency in asset accounting. As an addition will be introduced project framework which can be used in future projects and which help to avoid certain steps in the development process. At the moment data needs to be inputted manually with many useless mouse clicks and data needs to be searched from many various resources which slow down the process. Other organization has better tools at the moment than the myOrders system which is under investigation Research was started by exploring the main improvement areas. After this possible defects were traced. Suggested improvements were thought by exploring literature which has been written from usability design and research. Meanwhile also directional calculations from the benefits of the project were done alongside with the analysis of the possible risks and threats. After this NSN IT approved the changes which they thought was acceptable. The next step was to program them into tool and test them before releasing to production environment. The calculations were made also from implemented improvements and compared them to planned ones From whole project was made a framework which can be utilized also to other similar projects. The complete calculation was not possible because of time schedule of the project. Important observation in the project was that efficiency is not improved not only by changing the GUI but also improving processes without any programming. Feedback from end user should be also listened more in development process. End-user is after all the one who knows the best how the program should look like.

Dieselmoottorin esisuunnittelun kehittäminen simuloimalla

Diplomityö tehtiin Wärtsilä Finland Oy:n toimeksiannosta. Työ kohdistui yrityksen suunnittelemien keskinopeudella pyörivien nelitahti dieselmoottoreiden esisuunnittelun kehittämiseen. Esisuunnittelun osuus koko tuotesuunnittelussa on merkittävä, minkä vuoksi esisuunnitteluprosessin tehostaminen vaikuttaa koko tuotesuunnitteluprosessiin ja sen lopputuloksiin. Tällä hetkellä esisuunnitteluprosessi on jakautunut useaan eri vaiheeseen ja eri tiimeille, mikä aiheuttaa ongelmia esisuunnittelun läpiviemisessä. Työn tavoitteena oli tutkia nykyaikaisen kaupallisen simulointiohjelmiston soveltuvuutta kohdeyrityksessä esisuunnitteluprosessin eri vaiheiden yhdistämiseen. Työssä selvitettiin esisuunnittelun alussa käytettäviä suunnitteluparametreja, ja niiden hyödyntämistä suunniteltaessa simulointimallia kaupalliseen ohjelmistoon. Vaatimuksena oli, että ohjelmiston on toimittava parametreilla, jotka jo nyt ovat yrityksessä käytössä. Lisäksi simulointimallin antamat tulokset oli oltava hyödynnettävissä yksiselitteisesti yrityksen myöhemmissä tuotesuunnitteluvaiheissa. Myös mallin luomiseen tarvittavien parametrien määrä tuli pitää mahdollisimman pienenä. Esisuunnittelumallin toteuttamisessa tutkittiin kaupallisen AVL Excite Designer - ohjelmiston soveltuvuutta. Ohjelmisto ei soveltunut täysin tuottamaan halutun muotoisia tuloksia annetuilla parametreilla. Ohjelmiston muokkaaminen vaatimuksia vastaavaksi osoittautui työmäärältään suureksi. Yhtenä ratkaisuna olisi kaupallisen ohjelmiston käyttämisen sijaan suunnitella kyseiseen ongelmaan paremmin soveltuva oma ohjelmisto, jolloin toimivuus ja pitkän tähtäimen käyttövarmuus paranisi.

HTML-teknologian hyödyntäminen Web-sovelluksen prototypoinnissa

Käyttöliittymä on rajapinta käyttäjän ja järjestelmän tarjoamien toimintojen välillä ja sen toimivuus vaikuttaa toimintojen suorittamiseen joko positiivisesti tai negatiivisesti. Täten sovelluksen suunnitteluvaiheessa on hyvä arvioida käyttöliittymän ja sen toimintojen laatua ja kokeilla ideoiden toimivuutta rakentamalla asiasta prototyyppejä. Prototypoinnilla voidaan tunnistaa ja korjata mahdolliset ongelmat jo suunnittelupöydällä. Tämä diplomityö käsittelee Web-sovelluksen kehityksen aikana toteutettua käyttöliittymän ja sen toimintojen prototypointia. Käyttöliittymien mallintamista voidaan toteuttaa erilaisilla menetelmillä, joita työssä käydään läpi teknologisista näkökulmista eli miten prototypointimenetelmiä voidaan soveltaa projektin eri vaiheissa. Prototypoinnin apuna käytettäviin työkaluihin luodaan lyhyt katsaus esitellen yleisellä tasolla muutamia eri sovelluskategorian ohjelmistoja ja lisäksi käsitellään suunnittelumallien hyödyntämistä. Työ osoittaa, että yleisiä prototypointimenetelmiä ja -periaatteita voidaan soveltaa Web-sovellusten prototypoinnissa. Prototypointi on hyödyllistä aloittaa luonnostelemalla ja jatkaa aikaisessa vaiheessa HTML-malleihin, joilla päästään lähelle toteutuksen teknologioita ja mallintamaan sovelluksen luonnetta, ilmettä, tuntumaa ja vuorovaikutusta. HTML-prototyypeistä voidaan jalostaa sekoitetun tarkkuuden malleja ja ne toimivat toteutuksen perustana. Jatkokehityksessä ideoita voidaan esittää useilla eri tarkkuuden tekniikoilla.