Knowledge, processes and relationships in organizational change: Understanding how to facilitate management of intellectual capital in diverse organization structures and cultures.

This study examined relationships of organizational dependencies, change management and developed intellectual knowledge resources, in different intellectual capital based development programs on ICT-sector. Study was carried out in a research context, where high degree of external organizational contingencies existed and lots of changes in several development programs had taken place in the last years. From a scientific perspective the main contribution was that evidence between relationships of organizational dependencies, change model portfolio and developed knowledge resources could be suggested. From managerial perspective the primary implication was that in situations where sustainable competitive advantage is pursued by means of increasing knowledge based productivity of labor, firms should seek to pursue organizational settings where external dependencies have minimal amount of effect.

Identification of Some Additional Loss Components in High-Power Low-Voltage Permanent Magnet Generators

Permanent magnet generators (PMG) represent the cutting edge technology in modern wind mills. The efficiency remains high (over 90%) at partial loads. To improve the machine efficiency even further, every aspect of machine losses has to be analyzed. Additional losses are often given as a certain percentage without providing any detailed information about the actual calculation process; meanwhile, there are many design-dependent losses that have an effect on the total amount of additional losses and that have to be taken into consideration. Additional losses are most often eddy current losses in different parts of the machine. These losses are usually difficult to calculate in the design process. In this doctoral thesis, some additional losses are identified and modeled. Further, suggestions on how to minimize the losses are given. Iron losses can differ significantly between the measured no-load values and the loss values under load. In addition, with embedded magnet rotors, the quadrature-axis armature reaction adds losses to the stator iron by manipulating the harmonic content of the flux. It was, therefore, re-evaluated that in salient pole machines, to minimize the losses and the loss difference between the no-load and load operation, the flux density has to be kept below 1.5 T in the stator yoke, which is the traditional guideline for machine designers. Eddy current losses may occur in the end-winding area and in the support structure of the machine, that is, in the finger plate and the clamping ring. With construction steel, these losses account for 0.08% of the input power of the machine. These losses can be reduced almost to zero by using nonmagnetic stainless steel. In addition, the machine housing may be subjected to eddy current losses if the flux density exceeds 1.5 T in the stator yoke. Winding losses can rise rapidly when high frequencies and 10–15 mm high conductors are used. In general, minimizing the winding losses is simple. For example, it can be done by dividing the conductor into transposed subconductors. However, this comes with the expense of an increase in the DC resistance. In the doctoral thesis, a new method is presented to minimize the winding losses by applying a litz wire with noninsulated strands. The construction is the same as in a normal litz wire but the insulation between the subconductors has been left out. The idea is that the connection is kept weak to prevent harmful eddy currents from flowing. Moreover, the analytical solution for calculating the AC resistance factor of the litz-wire is supplemented by including an end-winding resistance in the analytical solution. A simple measurement device is developed to measure the AC resistance in the windings. In the case of a litz-wire with originally noninsulated strands, vacuum pressure impregnation (VPI) is used to insulate the subconductors. In one of the two cases studied, the VPI affected the AC resistance factor, but in the other case, it did not have any effect. However, more research is needed to determine the effect of the VPI on litz-wire with noninsulated strands. An empirical model is developed to calculate the AC resistance factor of a single-layer formwound winding. The model includes the end-winding length and the number of strands and turns. The end winding includes the circulating current (eddy currents that are traveling through the whole winding between parallel strands) and the main current. The end-winding length also affects the total AC resistance factor.

The accumulation of financial and social capital as a means to achieve a sustained competitive advantage for consumer co-operatives

By so far, scholars have discussed how the characteristics of consumer co-operatives (cooperative principles, values and the dual role of members as the users and owners) can potentially give them a competitive advantage over investor-owned firms (IOFs). In addition, concern for the community (as partly derived from locality and regionality) has been seen as a potential source of success for consumer co-operatives. On the other hand, the geographicbound purpose of consumer co-operation causes that consumer co-operative can be regarded as a challenging company form to manage. This is because, according to the purpose of consumer co-operation, co-operatives are obligated to 1) provide the owners with services and goods that are needed and do so at more affordable prices than their competitors do and/or 2) to operate in areas in which competitors do not want to operate (for example, because of the low profitability in certain area of business or region). Thus, consumer co-operatives have to operate very efficiently in order to execute this geographic-bound corporate purpose (e.g. they cannot withdraw from the competition during the declining stages of business). However, this efficiency cannot be achieved by any means; as the acceptance from the important regional stakeholders is the basic operational precondition and lifeline in the long run. Thereby, the central question for the survival and success of consumer co-operatives is; how should the consumer co-operatives execute its corporate purpose so it can be the best alternative to its members in the long run? This question has remained unanswered and lack empirical evidence in the previous studies on the strategic management of consumer cooperation. In more detail, scholars have not yet empirically investigated the question: How can consumer co-operatives use financial and social capital to achieve a sustained competitive advantage? It is this research gap that this doctoral dissertation aims to fulfil. This doctoral dissertation aims to answer the above questions by combining and utilizing interview data from S Group co-operatives and the central organizations in S Group´s network (overall, 33 interviews were gathered), archival material and 56 published media articles/reports. The study is based on a qualitative case study approach that is aimed at theory development, not theory verification (as the theory is considered as nascent in this field of study). Firstly, the findings of this study indicate that consumer co-operatives accumulate financial capital; 1) by making profit (to invest and grow) and 2) by utilizing a network-based organizational structure (local supply chain economies). As a result of financial capital accumulation, consumer co-operatives are able to achieve efficiency gains but also remain local. In addition, a strong financial capital base increases consumer co-operatives´ independence, competitiveness and their ability to participate in regional development (which is in accordance with their geographically bound corporate purpose). Secondly, consumer cooperatives accumulate social capital through informal networking (with important regional stakeholders), corporate social responsibility (CSR) behaviour and CSR reporting, pursuing common good, and interacting and identity sharing. As a result of social capital accumulation, consumer co-operatives are able to obtain the resources for managing; 1) institutional dependencies and 2) customer relations. By accumulating both social and financial capital through the above presented actions, consumer co-operatives are able to achieve sustained competitive advantage. Finally, this thesis provides useful ideas and new knowledge for cooperative managers concerning why and how consumer co-operatives should accumulate financial and social capital (to achieve sustained competitive advantage), while aligning with their corporate purpose.

Working Capital Management Model in value chains

The objective of this Master’s thesis is to create a calculation model for working capital management in value chains. The study has been executed using literature review and constructive research methods. Constructive research methods were mainly modeling. The theory in this thesis is founded in research articles and management literature. The model is developed for students and researchers. They can use the model for working capital management and comparing firms to each other. The model can also be used to cash management. The model tells who benefits and who suffers most in the value chain. Companies and value chains cash flows can be seen. By using the model can be seen are the set targets really achieved. The amount of operational working capital can be observed. The model enables user to simulate the amount of working capital. The created model is based on cash conversion cycle, return on investment and cash flow forecasting. The model is tested with carefully considered figures which seem to be though realistic. The modeled value chain is literally a chain. Implementing this model requires from the user that he/she have some kind of understanding about working capital management and some figures from balance sheet and income statement. By using this model users can improve their knowledge about working capital management in value chains.

Johtamisen, kommunikaation ja organisaation oikeudenmukaisuuden vaikutus sitoutumiseen ICT-alan organisaatiossa ja sitouttamisen keinot

Organisaatioon sitoutuminen on organisaation kannalta kriittinen ilmiö. Sen nähdään vähentävän henkilöstön vaihtuvuutta ja aineettoman pääoman katoa organisaatiosta. Tässä työssä tutkittiin erään valtionhallinnon laitoksen henkilöstön organisaatioon sitoutumisen tasoa ja siihen vaikuttavia tekijöitä. Tutkimuksessa organisaatioon sitoutumista tarkasteltiin johtamisen, kommunikaation ja organisaation oikeudenmukaisuuden näkökulmasta. Kaikkia tutkittavia tekijöitä tarkasteltiin sekä globaalista, että lokaalista näkökulmasta. Tutkimuksessa havaittiin ainoastaan globaalin tason vaikuttajilla olevan merkittävä vaikutus organisaatioon sitoutumisessa, ainoana poikkeuksena lokaali oikeudenmukaisuus. Organisaatioon sitoutumisen havaittiin perustuvan sitoutumisen tunneperäiseen elementtiin, velvollisuudentunnon ja jatkuvuusperäisen komponentin jäädessä heikommiksi. Merkittävä havainto oli tutkimuksissa havaittujen demografisten vaikuttajien korreloivan joko ainoastaan heikosti tai ei lainkaan organisaatioon sitoutumiseen. Tutkimuksessa tarkasteltiin myös kriittisten asiantuntijoiden ja perusasiantuntijoiden sitoutumisen eroja. Kriittisten asiantuntijoiden havaittiin olevan heikommin sitoutuneita ja sitoutumisen tekijöiden globaalin tason vaikutuksen olevan merkittävästi vahvempi heihin, kuin perusasiantuntijoihin. Perusasiantuntijoiden havaittiin kiinnittyvän lokaaleihin tekijöihin, joilla on heikompi, tai ei juurikaan vaikutusta organisaatioon sitoutumiseen. Vaikuttavimmiksi organisaatioon sitoutumista vahvistaviksi tekijöiksi tunnistettiin johtamisen ja kommunikaation laadukkuus, ja organisaation osoittama oikeudenmukaisuus.

The Cycle Times of Working Capital: Financial Value Chain Analysis Method

Interest towards working capital management increased among practitioners and researchers because the financial crisis of 2008 caused the deterioration of the general financial situation. The importance of managing working capital effectively increased dramatically during the financial crisis. On one hand, companies highlighted the importance of working capital management as part of short-term financial management to overcome funding difficulties. On the other hand, in academia, it has been highlighted the need to analyze working capital management from a wider perspective namely from the value chain perspective. Previously, academic articles mostly discussed working capital management from a company-centered perspective. The objective of this thesis was to put working capital management in a wider and more academic perspective and present case studies of the value chains of industries as instrumental in theoretical contributions and practical contributions as complementary to theoretical contributions and conclusions. The principal assumption of this thesis is that selffinancing of value chains can be established through effective working capital management. Thus, the thesis introduces the financial value chain analysis method which is employed in the empirical studies. The effectiveness of working capital management of the value chains is studied through the cycle time of working capital. The financial value chain analysis method employed in this study is designed for considering value chain level phenomena. This method provides a holistic picture of the value chain through financial figures. It extends the value chain analysis to the industry level. Working capital management is studied by the cash conversion cycle that measures the length (days) of time a company has funds tied up in working capital, starting from the payment of purchases to the supplier and ending when remittance of sales is received from the customers. The working capital management practices employed in the automotive, pulp and paper and information and communication technology industries have been studied in this research project. Additionally, the Finnish pharmaceutical industry is studied to obtain a deeper understanding of the working capital management of the value chain. The results indicate that the cycle time of working capital is constant in the value chain context over time. The cash conversion cycle of automotive, pulp and paper, and ICT industries are on average 70, 60 and 40 days, respectively. The difference is mainly a consequence of the different cycle time of inventories. The financial crisis of 2008 affected the working capital management of the industries similarly. Both the cycle time of accounts receivable and accounts payable increased between 2008 and 2009. The results suggest that the companies of the automotive, pulp and paper and ICT value chains were not able to self-finance. Results do not indicate the improvement of value chains position in regard to working capital management either. The findings suggest that companies operating in the Finnish pharmaceutical industry are interested in developing their own working capital management, but collaboration with the value chain partners is not considered interesting. Competition no longer occurs between individual companies, but between value chains. Therefore the financial value chain analysis method introduced in this thesis has the potential to support value chains in improving their competitiveness.

Evaluation of Location Intelligence exploitation in capital-intensive business

As technology has developed it has increased the number of data produced and collected from business environment. Over 80% of that data includes some sort of reference to geographical location. Individuals have used that information by utilizing Google Maps or different GPS devices, however such information has remained unexploited in business. This thesis will study the use and utilization of geographically referenced data in capital-intensive business by first providing theoretical insight into how data and data-driven management enables and enhances the business and how especially geographically referenced data adds value to the company and then examining empirical case evidence how geographical information can truly be exploited in capital-intensive business and what are the value adding elements of geographical information to the business. The study contains semi-structured interviews that are used to scan attitudes and beliefs of an organization towards the geographic information and to discover fields of applications for the use of geographic information system within the case company. Additionally geographical data is tested in order to illustrate how the data could be used in practice. Finally the outcome of the thesis provides understanding from which elements the added value of geographical information in business is consisted of and how such data can be utilized in the case company and in capital-intensive business.

Net working capital estimation model in project business

The objective of this Master’s thesis is to develop a model which estimates net working capital (NWC) monthly in a year period. The study is conducted by a constructive research which uses a case study. The estimation model is designed in the need of one case company which operates in project business. Net working capital components should be linked together by an automatic model and estimated individually, including advanced components of NWC for example POC receivables. Net working capital estimation model of this study contains three parts: output template, input template and calculation model. The output template gets estimate values automatically from the input template and the calculation model. Into the input template estimate values of more stable NWC components are inputted manually. The calculate model gets estimate values for major affecting components automatically from the systems of a company by using a historical data and made plans. As a precondition for the functionality of the estimation calculation is that sales are estimated in one year period because the sales are linked to all NWC components.

Analytic evaluation of three-phase short circuit demagnetization and hysteresis loss risk in rotor-surface-magnet Permanent-Magnet Synchronous Machines

Permanent magnet synchronous machines (PMSM) have become widely used in applications because of high efficiency compared to synchronous machines with exciting winding or to induction motors. This feature of PMSM is achieved through the using the permanent magnets (PM) as the main excitation source. The magnetic properties of the PM have significant influence on all the PMSM characteristics. Recent observations of the PM material properties when used in rotating machines revealed that in all PMSMs the magnets do not necessarily operate in the second quadrant of the demagnetization curve which makes the magnets prone to hysteresis losses. Moreover, still no good analytical approach has not been derived for the magnetic flux density distribution along the PM during the different short circuits faults. The main task of this thesis is to derive simple analytical tool which can predict magnetic flux density distribution along the rotor-surface mounted PM in two cases: during normal operating mode and in the worst moment of time from the PM’s point of view of the three phase symmetrical short circuit. The surface mounted PMSMs were selected because of their prevalence and relatively simple construction. The proposed model is based on the combination of two theories: the theory of the magnetic circuit and space vector theory. The comparison of the results in case of the normal operating mode obtained from finite element software with the results calculated with the proposed model shows good accuracy of model in the parts of the PM which are most of all prone to hysteresis losses. The comparison of the results for three phase symmetrical short circuit revealed significant inaccuracy of the proposed model compared with results from finite element software. The analysis of the inaccuracy reasons was provided. The impact on the model of the Carter factor theory and assumption that air have permeability of the PM were analyzed. The propositions for the further model development are presented.

Intellectual Capital Measurement in IT industry

The goal of this research – which is to critically analyze current theories and methods of intangible assets evaluation and potentially develop and test new methodology based on the practical example(s) in the IT industry. Having this goal in mind the main research questions in this paper will be: What are advantages and disadvantages of the current practices of measurement intellectual capital or valuation of intangible assets? How to properly measure intellectual capital in IT? Resulting method exhibits a new unique approach to the IC measurement and potentially even larger field of application. Despite the fact that in this particular research, I focused my attention on IT (Software and Internet services cluster – to be exact), the logic behind the method is applicable within any industry since the method is designed to be fully compliant with measurement theory and thus can be properly scaled for any application. Building a new method is a difficult and iterative process: in the current iteration the method stands out as rather a theoretical concept rather than a business tool, however even current concept totally fulfills its purpose as a benchmarking tool for measuring intellectual capital in IT industry.

Determinants of capital expenditures: Evidence from oil and mining sectors in Russia

This master’s thesis investigates the significant macroeconomic and firm level determinants of CAPEX in Russian oil and mining sectors. It also studies the Russian oil and mining sectors, its development, characteristics and current situation. The panel data methodology was implemented to identify the determinants of CAPEX in Russian oil and mining sectors and to test derived hypotheses. The core sample consists of annual financial data of 45 publicly listed Russian oil and mining sector companies. The timeframe of the thesis research is a six year period from 2007 to 2013. The findings of the master’s thesis have shown that Gross Sales, Return On Assets, Free Cash Flow and Long Term Debt are firm level performance variables along with Russian GDP, Export, Urals and the Reserve Fund are macroeconomic variables that determine the magnitude of new capital expenditures reported by publicly listed Russian oil and mining sector companies. These results are not controversial to the previous research paper, indeed they confirm them. Furthermore, the findings from the emerging countries, such as Malaysia, India and Portugal, are analogous to Russia. The empirical research is edifying and novel. Findings from this master’s thesis are highly valuable for the scientific community, especially, for researchers who investigate the determinant of CAPEX in developing countries. Moreover, the results can be utilized as a cogent argument, when companies and investors are doing strategic decisions, considering the Russian oil and mining sectors.

Effects of Obesity and Weight Loss Following Bariatric Surgery on Brain Function, Structural Integrity and Metabolism

Obesity is one of the key challenges to health care system worldwide and its prevalence is estimated to rise to pandemic proportions. Numerous adverse health effects follow with increasing body weight, including increased risk of hypertension, diabetes, hypercholesterolemia, musculoskeletal pain and cancer. Current evidence suggests that obesity is associated with altered cerebral reward circuit functioning and decreased inhibitory control over appetitive food cues. Furthermore, obesity causes adverse shifts in metabolism and loss of structural integrity within the brain. Prior cross-sectional studies do not allow delineating which of these cerebral changes are recoverable after weight loss. We compared morbidly obese subjects with healthy controls to unravel brain changes associated with obesity. Bariatric surgery was used as an intervention to study which cerebral changes are recoverable after weight loss. In Study I we employed functional magnetic resonance imaging (fMRI) to detect the brain basis of volitional appetite control and its alterations in obesity. In Studies II-III we used diffusion tensor imaging (DTI) and voxel-based morphometry (VBM) to quantify the effects of obesity and the effects of weight loss on structural integrity of the brain. In study IV we used positron emission tomography (PET) with [18F]-FDG in fasting state and during euglycemic hyperinsulinemia to quantify effects of obesity and weight loss on brain glucose uptake. The fMRI experiment revealed that a fronto-parietal network is involved in volitional appetite control. Obese subjects had lower medial frontal and dorsal striatal brain activity during cognitive appetite control and increased functional connectivity within the appetite control circuit. Obese subjects had initially lower grey matter and white matter densities than healthy controls in VBM analysis and loss of integrity in white matter tracts as measured by DTI. They also had initially elevated glucose metabolism under insulin stimulation but not in fasting state. After the weight loss following bariatric surgery, obese individuals’ brain volumes recovered and the insulin-induced increase in glucose metabolism was attenuated. In conclusion, obesity is associated with altered brain function, coupled with loss of structural integrity and elevated glucose metabolism, which are likely signs of adverse health effects to the brain. These changes are reversed by weight loss after bariatric surgery, implicating that weight loss has a causal role on these adverse cerebral changes. Altogether these findings suggest that weight loss also promotes brain health.Key words: brain, obesity, bariatric surgery, appetite control, structural magnetic resonance

Capital investments planning and life cycle simulations for the new valves manufacturing facility in Russia

The focus of the research is on the derivation of the valid and reliable performance results regarding establishment and launching of the new full-scale industrial facility, considering the overall current conditions for the project realization in and out of Russia. The study demonstrates the process of the new facility concept development, with following perfor-mance calculation, comparative analyzes conduction, life-cycle simulations, performance indicators derivation and project`s sustainability evaluation. To unite and process the entire input parameters complexity, regards the interlacing between the project`s internal technical and commercial sides on the one hand, and consider all the specifics of the Russian conditions for doing business on the other hand, was developed the unique model for the project`s performance calculation, simulations and results representation. The complete research incorporates all corresponding data to substantiate the assigned facility`s design, sizing and output capacity for high quality and cost efficient ferrous pipe-line accessories manufacturing, as well as, demonstrates that this project could be suc-cessfully realized in current conditions in Russia and highlights the room for significant performance and sustainability improvements based on the indexes of the derived KPIs.