Operations management in courts of justice - outlining functions, challenges and development possibilities

Professional services are an increasingly important group of economy and related to them there has been identified a fairly new concept called professional service operations management. However professional service operations management is still quite under-researched area which needs further research especially in specific contexts. This study aims to respond to that need by examining courts as an environment for operations management. As a result there is a preliminary structured description of what operations management is and could be in courts. The study also aims to inspire and tentatively classify possible areas for future research. Courts are examined based on three common perspectives for typical characteristics of professional services which can be identified in literature: the nature of customer role, the nature of professional work and the nature of process and product. The examination is based on research data from several research projects conducted in Finland and other European countries. Based on the examination it can be said that the operational environment of courts is highly complex and demanding because the case as an object of operations management tasks is challenging, the process sets strict requirements to the handling of the cases and the workforce is hard to direct.

Children at psychiatric risk and their families in Bucharest, in the context of 25 years of changes after December 89’ Romanian Revolution

The aim of the present dissertation was to capture a picture of child and adolescent mental health in Romania, in the context of almost 25 years of changes following the Romanian Revolution of December ’89. A three-part study was carried out in order to provide consistent answers to the pre-defined objectives: to appraise the development of child and adolescent mental health services in Romania (Part I), to explore the characteristics of clinically-referred patients in a Romanian child and adolescent psychiatry department (Part II), to examine the children’s mental health state and its connections with family functioning and associated risk factors (Part III). A multi-method research approach was used, comprising one qualitative analysis and two quantitative research studies. Part I consisted of a comparative qualitative analysis of the answers given by 10 mental health professionals at a 12-questions open ended interview about the current situation in child and adolescent mental health in Romania, on three topics: changes, challenges, solutions. Part II involved a descriptive quantitative analysis of certain variables (e.g. age, gender, primary diagnosis, co-morbidities, time of hospitalization) conducted on the patients who had been admitted to the Child and Adolescent Psychiatry Department at “Prof. Dr. Alexandru Obregia” Psychiatry Hospital, Bucharest in 1991 and in 2013. Part III was conducted on 342 subjects enrolled in two clinical groups and one school group, this study being performed through a cross-sectional analysis on multi-informant child and adolescent mental health problems and competencies (CBCL, YSR, SDQ P, SDQ SR) and their interrelation with household information (HQ) and family functioning (FAD). Outlining the results it can be stated that: 1) The CAMH System in Romania is definitely set on the path of reorganization, including a higher involvement of beneficiaries and of the community. 2) The characteristics of the admitted patients have changed significantly during the last almost 25 years since `89 December Revolution, under the influence of word wide trends in child psychiatry and of administrative aspects of the mental health network in Romania. 3) The rates of main diagnoses and co-morbidities confirm the reports in literature, with Autism Spectrum Disorder being the most frequent childhood psychiatric disorders in this study. 4) The children’s mental health problems in the psychiatry group are comparable to those reported for other clinical populations. 5) Significant score differences were observed according to various household features and also meaningful associations between a child’s clinical status and different aspects of family functioning. The Romanian Child and Adolescent Psychiatry has started to adopt the norms and standards of the European Union. In the 25 years that have elapsed after the 1989 Revolution, many changes have occurred in Romanian CAMH, but many unresolved issues have also risen. Therefore, the major contribution of this thesis is that it provides a coherent and updated overview of the present-day situation from three different perspectives- those of mental healthcare professionals, the one observed in clinical patients and the one reported by children’s families.

Energy and raw material consumption analysis of powder bed fusion: case study: CNC machining and laser additive manufacturing

Laser additive manufacturing (LAM), known also as 3D printing, is a powder bed fusion (PBF) type of additive manufacturing (AM) technology used to manufacture metal parts layer by layer by assist of laser beam. The development of the technology from building just prototype parts to functional parts is due to design flexibility. And also possibility to manufacture tailored and optimised components in terms of performance and strength to weight ratio of final parts. The study of energy and raw material consumption in LAM is essential as it might facilitate the adoption and usage of the technique in manufacturing industries. The objective this thesis was find the impact of LAM on environmental and economic aspects and to conduct life cycle inventory of CNC machining and LAM in terms of energy and raw material consumption at production phases. Literature overview in this thesis include sustainability issues in manufacturing industries with focus on environmental and economic aspects. Also life cycle assessment and its applicability in manufacturing industry were studied. UPLCI-CO2PE! Initiative was identified as mostly applied exiting methodology to conduct LCI analysis in discrete manufacturing process like LAM. Many of the reviewed literature had focused to PBF of polymeric material and only few had considered metallic materials. The studies that had included metallic materials had only measured input and output energy or materials of the process and compared to different AM systems without comparing to any competitive process. Neither did any include effect of process variation when building metallic parts with LAM. Experimental testing were carried out to make dissimilar samples with CNC machining and LAM in this thesis. Test samples were designed to include part complexity and weight reductions. PUMA 2500Y lathe machine was used in the CNC machining whereas a modified research machine representing EOSINT M-series was used for the LAM. The raw material used for making the test pieces were stainless steel 316L bar (CNC machined parts) and stainless steel 316L powder (LAM built parts). An analysis of power, time, and the energy consumed in each of the manufacturing processes on production phase showed that LAM utilises more energy than CNC machining. The high energy consumption was as result of duration of production. Energy consumption profiles in CNC machining showed fluctuations with high and low power ranges. LAM energy usage within specific mode (standby, heating, process, sawing) remained relatively constant through the production. CNC machining was limited in terms of manufacturing freedom as it was not possible to manufacture all the designed sample by machining. And the one which was possible was aided with large amount of material removed as waste. Planning phase in LAM was shorter than in CNC machining as the latter required many preparation steps. Specific energy consumption (SEC) were estimated in LAM based on the practical results and assumed platform utilisation. The estimated platform utilisation showed SEC could reduce when more parts were placed in one build than it was in with the empirical results in this thesis (six parts).

Improving reporting and internal control with process thinking - case study in a multinational corporation

The aim of this Master’s Thesis is to find applicable methods from process management literature for improving reporting and internal control in a multinational corporation. The method of analysis is qualitative and the research is conducted as a case study. Empirical data collection is carried out through interviews and participating observation. The theoretical framework is built around reporting and guidance between parent company and subsidiary, searching for means to improve them from process thinking and applicable frameworks. In the thesis, the process of intercompany reporting in the case company is modelled, and its weak points, risks, and development targets are identified. The framework of critical success factors in process improvement is utilized in assessing the development targets. Also internal control is analyzed with the tools of process thinking. As a result of this thesis, suggestions for actions improving the reporting process and internal control are made to the case company, the most essential of which are ensuring top management’s awareness and commitment to improvement, creating guidelines and tools for internal control and creating and implementing improved intercompany reporting process.

Biomassakattilan simulointi

Tässä diplomityössä mallinnetaan Apros-simulointiohjelmistolla kylläistä höyryä tuottava KPA Uniconin toimittama Biograte-kattilalaitos. Työ on rajattu käsittelemään vesihöyrypiiri syöttövesisäiliöstä prosessiin lähtevään höyryyn saakka. Savukaasupuoli on mallinnettu polttoaineen ja palamisilman syötöstä savupiippuun asti, mutta savukaasujen puhdistus on jätetty pois simulaatiomallista. Työssä kerrotaan yleisesti biopolttoaineista, kattilalaitoksista ja tulipesäratkaisuista. Simuloitava kattilalaitos ja sen säätöjärjestelmä käydään läpi yksityiskohtaisemmin. Simuloinnista ja sen mahdollisuuksista kerrotaan yleisesti, jonka jälkeen esitellään tehty simulaatiomalli. Simulointituloksia verrataan kattilan mitoitusarvoihin ja tärkeimpien prosessisuureiden muutoksia tutkitaan kuormanmuutostilanteissa. Lopuksi tuloksista tehdään yhteenveto ja esitellään jatkotoimenpidesuunnitelmat. Simuloitu kattilalaitos tuottaa kylläistä höyryä halutun määrän oikeassa paineessa ja lämpötilassa. Kattilan prosessisuureet vastaavat melko hyvin mitoitusarvoja ja simulaatiomalli toimii vakaasti myös kuormanmuutostilanteissa. Suurimmat kompromissit ja yksinkertaistukset on tehty tulipesän ja polttoaineensyötön mallinnuksessa. Näitä osa-alueita kehittämällä simulaation tarkkuutta olisi mahdollista parantaa entisestään. Jatkossa simulointimallia on tarkoitus kehittää laajentamalla se kattamaan myös laitoksen sekundääripuoli kokonaisuudessaan. Tulosten perusteella simulaatiota voidaan pitää onnistuneena mallina Biograte-kattilalaitoksesta.

Improving purchasing process for small purchases at a manufacturing company in chemical industry

This thesis was conducted on assignment by a multinational chemical corporation as a case study. The purpose of this study is to find ways to improve the purchasing process for small purchases at the case company. The improvements looked after are mainly cost and time savings. Purchasing process is the process that starts from the requisition of goods or services and ends when the invoice is paid. In this thesis the purchases with value less than 1000€ are considered to be small. The theoretical framework of the thesis consists of general theoretical view of costs and performance of the purchasing process, different types of purchasing processes and a model for improving purchasing processes. The categorization to small and large purchases is the most important followed by the division between direct and indirect purchases. Also models that provide more strategic perspective for categorization were found to be useful. Auditing and managerial control are important parts of the purchasing process. When considering the transaction costs of purchasing from the costs–benefits perspective large and small purchases should not have the same processes. Purchasing cards, e-procurement and vendor managed inventory are seen as an alternative to the traditional purchasing process. The empirical data collection was done by interviewing the company employees that take part of the purchasing process in their daily work. The interviews had open-ended questions and the answers were coded and analyzed. The results consist of process description and assessment as well as suggestions for potential improvements. At the case company the basic purchasing process was similar to the traditional purchasing process that is entirely done with computers and online. For some categories there was already more sophisticated e-procurement solutions in use. To improve the current e-procurement based solutions elimination of authorization workflow and better information exchange can be seen as potential improvements for most of the case purchases. Purchasing cards and a lightweight form of vendor managed inventory can be seen as potential improvements for some categories. Implementing the changes incurs at least some cost and the benefits might be hard to measure. This thesis has revealed that the small purchases have potential for significant cost and time savings at the case company.