Minimum error contrast enhancement

Contrast enhancement is an image processing technique where the objective is to preprocess the image so that relevant information can be either seen or further processed more reliably. These techniques are typically applied when the image itself or the device used for image reproduction provides poor visibility and distinguishability of different regions of interest inthe image. In most studies, the emphasis is on the visualization of image data,but this human observer biased goal often results to images which are not optimal for automated processing. The main contribution of this study is to express the contrast enhancement as a mapping from N-channel image data to 1-channel gray-level image, and to devise a projection method which results to an image with minimal error to the correct contrast image. The projection, the minimum-error contrast image, possess the optimal contrast between the regions of interest in the image. The method is based on estimation of the probability density distributions of the region values, and it employs Bayesian inference to establish the minimum error projection.

Discription of a New Calculation Method for Determination of Stoichiometric Dissociation Constants of WeakAcid in Salt Solutions from Potentiometric Titration Data

A recently developed calculation method to determine stoichiometric dissociation constants of weak acids from potentiometric titration data is described. The titration data from three different weak acids in aqueous salt solutions at 25 °C were used as examples of the use of the method. The salt alone determined the ionic strength of the solutions considered in this study, and salt molalities up to 0,5 mol kg -1 were used.

DFM(A)-Aspects of an Advanced Cable Gland Design

Nowadays typical motor junction boxes do not incorporate cable glands, which would provide good electrical performance interms of electromagnetic compatibility. In this paper, a manufacturability and assembly analysis for the new construction of a rigid body feeder cable junction of an electric motor is presented especially for converter drives (practical tests were carried out at LUT during 2007). Although the cable junction should also clamp the cable to provide enough tensile strength, the phase conductors should not get squashed by the groundingconnection. In order to ensure good performance in an electrical mean especially in converter drives, the grounding of the cable should be connected 360 degrees around the cable. In this paper, following manufacturing technologies are discussed: traditional turning, precision and centrifugal casting, and rotation moulding. DFM(A)-aspects are presented in detail.

Value added logistical support service: logistics cost structure and performance in the new concept. Part 3

The aim of this study is to present an Activity-Based Costing spreadsheet tool for analyzing the logistics costs. The tool can be used both by customer-companies and logistics service providers. The study discusses the influence of different activity models on costs. Additionally this paper discusses about the logistical performance across the total supply chain This study is carried out using ananalytical research approach and literature material has been used for supplementing the concerned research approach. Cost structure analysis was based on the theory of activity-based management. This study was outlined to spare part logistics in machine-shop industry. The outlines of logistics services and logisticalperformance discussed in this report are based on the new logistics business concept (LMS-concept), which has been presented earlier in the Valssi-project. Oneof the aims of this study is to increase awareness of different activity modelson logistics costs. The report paints an overall picture about the business environment and requirements for the new logistics concept.

New Operation Model for Maintenance Material Logistics in Paper Industry

This research report illustrates and examines new operation models for decreasing fixed costs and transforming them into variable costs in the field of paper industry. The report illustrates two cases - a new operation model for material logistics in maintenance and an examination of forklift truck fleet outsourcing solutions. Conventional material logistics in maintenance operation is illustrated and some problems related to conventional operation are identified. A new operation model that solves some of these problems is presented including descriptions of procurement and service contracts and sources of added value. Forklift truck fleet outsourcing solutions are examined by illustrating the responsibilities of a host company and a service provider both before and after outsourcing. The customer buys outsourcingservices in order to improve its investment productivity. The mechanism of how these services affect the customer company's investment productivity is illustrated.

Metsäklusterin tutkimusverkosto: Metsäteollisuuden prosessien automaation, diagnostiikan ja kunnossapidon tutkimus

Tämä selvitys on osaEtelä-Suomen lääninhallituksen, ESR:n (Euroopan sosiaalirahasto) ja Lappeenrannan kaupungin rahoittamaa 'Metsäklusterin tutkimusverkostO'-hanketta, joka toteutettiin 1.10.2006-31.10.2007 välisenä aikana Lappeenrannan teknilliselläyliopistolla. Hankkeessa tehtiin selvitys metsäklusterin tutkimustoiminnasta jatutkimustarpeista rajattuna prosessianalytiikan, automaation ja käynnissäpidon alueille. LTY:n yhtenä vahvana strategisena painopistealueena on metsäklusteri ja -Metsäklusterin tutkimusverkostO'-hanke liittyy keskeisenä osana edellä mainittujen painopistealueiden selvitystyöhön LTY:ssä. Selvitykseen kuuluivat kirjallisuus- ja internethaut sekä haastattelututkimus. Internet- ja kirjallisuushauissa hyödynnettiin mm. yritysten ja toimijoiden kotisivuja, erilaisten tutkimushankkeiden raportteja, konferenssien ja seminaarien materiaaleja. Haastattelututkimuksessa haastateltiin metsäklusterissa toimivia automaatiosta, kunnossapidosta ja tuotannosta vastaavaa henkilöitä sekä alan tutkimuksesta vastaavia asiantuntijoita. Hankkeessa pidettiin loppuseminaari 27.9.2007 Lappeenrannan teknillisellä yliopistolla. Loppuseminaarissa esiteltiin hankkeen tulokset sekä kuultiin eri tahojen esityksiä prosessianalytiikkaan, -automaatioon ja käynnissäpitoon liittyen. Selvitys vahvisti olettamuksen, että metsäteollisuuden prosessiautomaation ja kunnossapidon toimialakenttä on erittäin monitahoinen ja parhaillaan muuttuva alue. Selvitystyön tuloksena tuli esille useita konkreettisia tutkimusaiheita, jotka vaihtelivat teknologisista teemoista: mittaustekniikka, prosessien tai laitteiden suorituskyky ja ylläpito talouteen liittyviin teemoihin: liiketoiminnan organisoituminen, verkottuneen liiketoiminnan strategiat sekä henkilöstön johtaminen muuttuvissa tilanteissa. Tutkimustoiminnan organisoitumista eri verkostoihin on tapahtunut ja tapahtumassa. Useita alueellisia ja kansallisia metsäteollisuuteen liittyviä verkostoja on jo olemassa, ja jatkossa automaatioon ja kunnossapitoon liittyvien aihepiirien vahvistaminen jo olemassa olevissa metsäklusteriin liittyvissä verkostoissa on tärkeää. Tämän lisäksi Kaakkois-Suomen alueellisten toimijoiden ja LTY:n liittyminen automaatioalan kansalliseen verkostoon on välttämätöntä.

Ranking-Dominance Relation for (Evolutionary) Multi-Objective Optimization

An alternative relation to Pareto-dominance relation is proposed. The new relation is based on ranking a set of solutions according to each separate objective and an aggregation function to calculate a scalar fitness value for each solution. The relation is called as ranking-dominance and it tries to tackle the curse of dimensionality commonly observedin evolutionary multi-objective optimization. Ranking-dominance can beused to sort a set of solutions even for a large number of objectives when Pareto-dominance relation cannot distinguish solutions from one another anymore. This permits search to advance even with a large number of objectives. It is also shown that ranking-dominance does not violate Pareto-dominance. Results indicate that selection based on ranking-dominance is able to advance search towards the Pareto-front in some cases, where selection based on Pareto-dominance stagnates. However, in some cases it is also possible that search does not proceed into direction of Pareto-front because the ranking-dominance relation permits deterioration of individual objectives. Results also show that when the number of objectives increases, selection based on just Pareto-dominance without diversity maintenance is able to advance search better than with diversity maintenance. Therefore, diversity maintenance is connive at the curse of dimensionality.

A computationally efficient shear deformable beam element for large deformation multibody applications

In this paper, a new two-dimensional shear deformable beam element based on the absolute nodal coordinate formulation is proposed. The nonlinear elastic forces of the beam element are obtained using a continuum mechanics approach without employing a local element coordinate system. In this study, linear polynomials are used to interpolate both the transverse and longitudinal components of the displacement. This is different from other absolute nodal-coordinate-based beam elements where cubic polynomials are used in the longitudinal direction. The accompanying defects of the phenomenon known as shear locking are avoided through the adoption of selective integration within the numerical integration method. The proposed element is verified using several numerical examples, and the results are compared to analytical solutions and the results for an existing shear deformable beam element. It is shown that by using the proposed element, accurate linear and nonlinear static deformations, as well as realistic dynamic behavior, can be achieved with a smaller computational effort than by using existing shear deformable two-dimensional beam elements.

Liiketoimintaprosessin koordinointirakenteen kehittäminen

Työn tarkoituksena on kehittää uusi liiketoimintaprosessien koordinointirakenteen kehittämismenetelmä perinteisten, prosessin työnkulun kehittämiseen keskittyvien, prosessinkehittämismenetelmien tueksi. Menetelmäkehityksen pohjustamiseksi on työssä ensin tarkasteltu kirjallisuudessa esitettyjä prosessien kehittämismenetelmiä sekä liiketoimintaprosessien ja organisaatioiden koordinointitarpeita ja koordinointimekanismeja. Näidenperusteella prosessin koordinointirakenteen kehittämismenetelmälle on ideoitu pienryhmässä vaiheet ja sisältö. Menetelmän toimivuutta testattiin yhdessä caseprosessissa. Käytännön kehittämistyössä menetelmä toimi pääasiassa ideoidun rungon mukaisesti ja koordinointirakenteen kehittäminen koettiin hyödylliseksi caseprosessin toiminnan kannalta. Testiprosessin kehittämisestä saatujen tulosten perusteella on menetelmälle laadittu jatkokehityssuunnitelma, jokasisältää viisi potentiaalista menetelmän jatkokehityssuuntaa.

Value added logistics in supply and demand chains. Smile. Part 1. eBusiness between global company and itslocal sme supplier network

VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.

Competitiveness Comparison of the Electricity Production Alternatives

The competitiveness comparison is carried out for merely electricity producing alternatives. In Finland, further construction of CHP (combined heat and power) power plants will continue and cover part of the future power supply deficit, but also new condensing power plant capacity will be needed. The following types of power plants are studied: - nuclear power plant, - coal-fired condensing power plant - combined cycle gas turbine plant, - peat-fired condensing power plant. - wood-fired condensing power plant - wind power plant The calculations have been made using the annuity method with a real interest rate of 5 % perannum and with a fixed price level as of March 2003. With the annual full load utilization time of 8000 hours the nuclear electricity would cost 23,7 ¤/MWh, the gas based electricity 32,3 ¤/MWh and coal based electricity 28,1 ¤/MWh. If the influence of emission trading is taken into account,the advantage of the nuclear power will still be improved. Inorder to study the impact of changes in the input data, a sensitivity analysis has been carried out. It reveals that the advantage of the nuclear power is quite clear. E.g. the nuclear electricity is rather insensitive tothe changes of the uranium price, whereas for natural gas alternative the rising trend of gas price causes the greatest risk.

Value added logistics in supply and demand chain. Smile. Part 2. eBusiness in a service business. Case: A maintenance and operations network in forest industry

VVALOSADE is a research project of professor Anita Lukka's VALORE research team in the Lappeenranta University of Technology. The VALOSADE includes the ELO technology program of Tekes. SMILE is one of four subprojects of the VALOSADE. The SMILE study focuses on the case of the company network that is composed of small and micro-sized mechanical maintenance service providers and forest industry as large-scale customers. The basic principle of the SMILE study is the communication and ebusiness in supply and demand networks. The aim of the study is to develop ebusiness strategy, ebusiness model and e-processes among the SME local service providers, and onthe other hand, between the local service provider network and the forest industry customers in a maintenance and operations service business. A literature review, interviews and benchmarking are used as research methods in this qualitative case study. The first SMILE report, 'Ebusiness between Global Company and Its Local SME Supplier Network', concentrated on creating background for the SMILE study by studying general trends of ebusiness in supply chains and networks of different industries. This second phase of the study concentrates on case network background, such as business relationships, information systems and business objectives; core processes in maintenance and operations service network; development needs in communication among the network participants; and ICT solutions to respond needs in changing environment. In the theory part of the report, different ebusiness models and frameworks are introduced. Those models and frameworks are compared to empirical case data. From that analysis of the empirical data, therecommendations for the development of the network information system are derived. In process industry such as the forest industry, it is crucial to achieve a high level of operational efficiency and reliability, which sets up great requirements for maintenance and operations. Therefore, partnerships or strategic alliances are needed between the network participants. In partnerships and alliances, deep communication is important, and therefore the information systems in the network also are critical. Communication, coordination and collaboration will increase in the case network in the future, because network resources must be optimised to improve competitive capability of the forest industry customers and theefficiency of their service providers. At present, ebusiness systems are not usual in this maintenance network. A network information system among the forest industry customers and their local service providers actually is the only genuinenetwork information system in this total network. However, the utilisation of that system has been quite insignificant. The current system does not add value enough either to the customers or to the local service providers. At present, thenetwork information system is the infomediary that share static information forthe network partners. The network information system should be the transaction intermediary, which integrates internal processes of the network companies; the network information system, which provides common standardised processes for thelocal service providers; and the infomediary, which share static and dynamic information on right time, on right partner, on right costs, on right format and on right quality. This study provides recommendations how to develop this system in the future to add value to the network companies. Ebusiness scenarios, vision, objectives, strategies, application architecture, ebusiness model, core processes and development strategy must be considered when the network information system will be developed in the next development step. The core processes in the case network are demand/capacity management, customer/supplier relationship management, service delivery management, knowledge management and cash flow management. Most benefits from ebusiness solutions come from the electrifying of operational level processes, such as service delivery management and cash flow management.

Esiselvitys puupolttoaineen jalostamisesta torrefiointitekniikalla

Fossiilisten polttoaineiden käytöstä aiheutuvia kasvihuonekaasupäästöjä pyritään vähentämään EU:ssa mm. päästökaupan avulla. Uusiutumattomien polttoaineiden tilalle kehitetään biopolttoaineita, joita voidaan hyödyntää olemassa olevien voimalaitosten polttolaitteistoilla. Biopolttoaineiden etuna on, ettäniiden ei katsota lisäävän hiilidioksidipäästöjä, koska biomassa sitoo itseensä kasvaessaan poltossa vapautuvan määrän hiiltä. Eräs kiinnostavimmista jalostetuista biopolttoaineista on torrefioitu puu, joka vastaa useimmilta ominaisuuksiltaan kivihiiltä ja jota voidaan käyttää hiilivoimalaitoksissa ilman laitteistomuutoksia. Torrefiointi on puun eräänlaista paistamista hapettomissa olosuhteissa 250-270ºC:ssa, jolloin siitä saadaanpoistettua vesi ja osa haihtuvista aineista. Puun väri muuttuu suklaanruskeaksi, se kevenee, ei savuta poltettaessa, hylkii vettä, jauhautuu hyvin sekä sillä on pienet hiukkaspäästöt. Käsitellyn puun ominaisuudet muuttuvat säilyvyydeltään ja käyttöominaisuuksiltaan merkittävästi raaka-aineeseen verrattuna. Torrefioinnilla saavutetaan puulle polttoainekäytön kannalta myös paremmat ja kestävämmät ominaisuudet kuin hiiltämällä. Torrefiointiprosessia on tutkittu jonkin verran ja torrefioidun biomassan polttoa voimalaitosmittakaavassa on kokeiltu pienessä mittakaavassa. Torrefioitu materiaali on alhaisen tiheytensä vuoksi hankalaa ja kallista kuljettaa,joten sen tiheyttä tulee nostaa kuljetuksia varten tiivistämällä esim.pelletöimällä. Torrefionti yhdistettynä pelletöintiin on parhaimmillaan kilpailukykyinen vaihtoehto, kun kivihiiltä korvaavaa biomassaa jalostetaan kaukana käyttöpaikasta ja kuljetetaan irtotavarana aluskuljetuksina. Torrefioitua puuta on tiettävästi poltettu vain hollantilaisessa voimalaitoksessa. Tässä esiselvityksessä kootun tiedon perusteella torrefioidun puupolttoaineen tuottamiseen Suomen olosuhteissa arvioidaan olevan teknis-taloudellisia mahdollisuuksia. Kuitenkin torrefiointiprosessin soveltaminen suomen olosuhteisiin ja kotimaisiin raakaaineisiin vaatii panostusta jatkotutkimukseen ennen varsinaiseen toteutusvaiheeseen siirtymistä.

MIG-juotto väsymiskestävyyden parantamismenetelmänä

Tässä tutkimuksessa esitellään MIG-juoton periaatteet ja tarkastellaan menetelmää siitä näkökulmasta, että menetelmä voisi toimia yhtenä varteenotettavana hitsattujen liitosten väsymiskestävyyden parantamismenetelmänä. Muiden parantamismenetelmien laajaa kirjoa esitellään lyhyesti. MIG-juoton soveltuvuutta parantamismenetelmäksi tutkittiin väsytyskokein. Kokeiden avulla määritettiin pelkästään MIG-juotetun liitoksen väsymiskestävyys erilaisissa tapauksissa. Lisäksi määritettiin väsymiskestävyys tapauksessa, jossa perinteisen MAG-pienahitsin rajaviivalle MIG-juotetiin ylimääräinen palko. Jälkimmäisessä tapauksessa menetelmä toimii väsymiskestävyyden parantamismenetelmänä. Väsytyskokeita tehtiin kaikkiaan 63 kpl.Kaikkiaan erilaisia väsytyskoesarjoja oli kymmenen, joista kuusi oli 8-10 koekappaletta käsittäviä varsinaisia tutkittavia tapauksia ja neljä pieniä, vain kaksi tai kolme koesauvaa käsittäviä pilottikoesarjoja. Koetuloksia verrattiin IIW:n(International Institute of Welding) suunnitteluohjeisiin ja suosituksiin. MIG-juotettujen liitosten väsymiskestävyys oli yleisesti ottaen hyvä. Päittäisliitosoli vähintään yhtä hyvä kuin tavanomaisesti hitsattu. Voimaa kantavassa taivutustapauksessa saatiin 110 % parempi väsymislujuus verrattuna IIW:n suunnitteluohjeeseen. Voimaa kantamattomissa poikittaisissa kiinnitysliitoksissa puolestaan saavutettiin paikallisia nimellisiä jännityksiä käyttäen 70-80 %:n parannus suunnitteluohjeeseen nähden. Pelkästään MIG-juotetun liitoksen ja 'parannetun' liitoksen väsymislujuudet olivat tässä tapauksessa likimain yhtä suuret. MIG-juottoa käytetään vaihtoehtoisena liittämismenetelmänä jo joissakin teollisissa sovelluksissa. Tämän tutkimuksen koetulokset antavat selviä viitteitä siitä, että menetelmä voisi toimia yhtenä varteenotettavana väsymiskestävyyden parantamiskeinona uusille tai korjatuille rakenteille. Vaaditaan kuitenkin vielä lisätutkimuksia, jotta menetelmää voisi soveltaa luottavaisin mielin tuotantokäytössä väsymiskestävyyden parantamismenetelmänä.