Laskentamenetelmissä tehtävien valintojen merkitys alueellisen lämmön- ja sähköntuotannon kasvihuonekaasupäästöjen kannalta

Tämän diplomityön tarkoituksena on selvittää alueellisen lämmön- ja sähköntuotannon laskentamenetelmävalintojen vaikutuksia kasvihuonekaasupäästöihin. Työn tutkimuskysymyksenä on, onko mahdollista, että laskentamenetelmän valinnalla on suurempi vaikutus alueen kasvihuonekaasupäästöihin kuin energiantuotantotekniikan valinnalla. Laskentamenetelmävalinnoista tutkitaan tarkemmin CHP-laitoksen päästöjen allokointitavan ja sähkönpäästöjen määrittämisen vaikutuksia kasvihuonekaasupäästöihin. Tutkimusmenetelminä työssä on käytetty kirjallisuuskatsausta sekä tapaustutkimusta. Kirjallisuuskatsauksen aineistona käytetään tieteellisiä artikkeleita ja tutkimusraportteja. Tapaustutkimuksessa tutkitaan yksittäistä case-kohdetta, joka on Tampereen Härmälänrannan uudisrakennusalue, ja jossa vertaillaan maalämpöpumppua ja kaukolämpöä alueen lämmitysratkaisuina. Työn tuloksena todetaan, että on olemassa sellaisia tilanteita, joissa laskentamenetelmän valinnalla on suurempi vaikutus alueen kasvihuonekaasupäästöihin kuin energiantuotantotekniikan valinnalla. Lisäksi case-tarkastelun perusteella huomataan, että laskentamenetelmävalinnoilla on sitä suurempi merkitys, mitä enemmän CHP-laitoksessa käytetään uusiutuvaa polttoainetta. Työn johtopäätöksenä voidaan todeta, että energiantuotannon kasvihuonekaasupäästölaskennassa on syytä ymmärtää ja huomioida eri laskentamenetelmävalintojen vaikutus esitettyihin tuloksiin.

Hiilijalanjäljen pienentämismahdollisuuksien tunnistaminen mediatalossa

Tässä diplomityössä on tutkittu mediatalon hiilijalanjäljen pienentämismahdollisuuksia yhteistyössä Otava-konsernin kanssa. Työ on siis osa Otava-konsernin yritysvastuun kehittämistä. Yritysvastuuseen ja sen raportointiin on perehdytty myös yleisesti mediasektorin tasolla. Työssä perehdytään myös hiilijalanjäljen laskentaohjeisiin sekä lasketaan Otavakonsernin hiilijalanjälki tietyin rajauksin. Yrityksen hiilijalanjäljen laskentaa voidaan toteuttaa esimerkiksi Greenhouse Gas Protokollan laskentaohjeiden mukaisesti. Yleisiä ohjeita kasvihuonekaasuinventaarin laskentaan antaa ISO 14064-1 standardi. Otava-konsernin laskenta on toteutettu ClimateCalc-laskuria soveltuvilta osin hyväksikäyttäen. Laskennan tulokset on esitetty konsernin yhtiöittäin vuoden 2013 tietojen pohjalta. Valittu laskuri toimi parhaiten kirjapainon käytössä. Muiden konsernin yhtiöiden osalta laskuria on jouduttu soveltamaan. Konsernin päästöistä myös merkittävä osa syntyi kirjapainossa, mikä osaltaan johtuu muita yhtiöitä laajemmasta laskennasta. Tulevaisuudessa laskentaa on hyvä laajentaa myös muiden yhtiöiden osalta, jolloin laskurin ominaisuuksia pystytään käyttämään laajemmin hyväksi.

Suomen kasvihuonekaasupäästöt Kioton pöytäkirjan ensimmäisen sopimuskauden lopussa – kokonaistilanne ja vähentämistoimenpiteet

Tämä diplomityö on läpileikkaus kasvihuonekaasupäästöistä sekä niitä koskevista vähennystoimenpiteistä Suomessa Kioton pöytäkirjan ensimmäisen sopimuskauden lopussa. Työ on toteutettu kirjallisuustutkimuksena ja siihen on käytetty painettuja sekä sähköisiä lähteitä. Huoli ilmastonmuutoksesta on saanut aikaan sen, että kasvihuonekaasupäästöjä rajoitetaan tänä päivänä kansainvälisillä sopimuksilla. Vaikka kaikki suuretkaan päästäjämaat eivät ole sopimuksia ratifioineet, ovat EU-maat Suomi mukaan lukien sitoutuneet YK:n ilmastonmuutosta koskevaan puitesopimukseen ja sen noudattamiseen. Puitesopimusta tarkentavassa Kioton pöytäkirjassa EU sitoutui vähentämään kuuden eri kasvihuonekaasun kokonaispäästöjä yhteensä 8 prosenttia ajanjaksolla 2008–2012 vuoteen 1990 verrattuna. Kasvihuonekaasut, joita rajoitukset koskivat, olivat hiilidioksidi, metaani, dityppioksidi, fluorihiilivedyt, perfluorihiilivedyt ja rikkiheksafluoridi. EU:n sisäisessä taakanjaossa Suomen tavoite oli pitää päästöt vertailuvuoden 1990 tasossa ja Suomi alitti tämän noin viidellä prosentilla. Vuoden 2012 jälkeen Suomen kasvihuonekaasupäästöjen vähennystavoite on kiristynyt. Vuosille 2013–2020 Suomen tavoite on vähentää kasvihuonekaasupäästöjä 20 prosenttia alle perusvuoden 1990 tason. Työssä tutustutaan myös keinoihin, joilla aiempien ja tulevien päästöjenvähennystavoitteiden saavuttaminen on mahdollista. Näitä keinoja on mm. erilaisten biopolttoaineiden sekoittaminen fossiilisten polttoaineiden sekaan, energiatehokkuuden parantaminen ja biokaasun käytön lisääminen. Lisäksi työssä käsitellään eräitä merkityksellisiä käsitteitä, kuten EU:n päästökauppajärjestelmä ja hiilidioksidin talteenotto ja varastointi.

The role of nuclear power in the future energy system

Currently widely accepted consensus is that greenhouse gas emissions produced by the mankind have to be reduced in order to avoid further global warming. The European Union has set a variety of CO2 reduction and renewable generation targets for its member states. The current energy system in the Nordic countries is one of the most carbon free in the world, but the aim is to achieve a fully carbon neutral energy system. The objective of this thesis is to consider the role of nuclear power in the future energy system. Nuclear power is a low carbon energy technology because it produces virtually no air pollutants during operation. In this respect, nuclear power is suitable for a carbon free energy system. In this master's thesis, the basic characteristics of nuclear power are presented and compared to fossil fuelled and renewable generation. Nordic energy systems and different scenarios in 2050 are modelled. Using models and information about the basic characteristics of nuclear power, an opinion is formed about its role in the future energy system in Nordic countries. The model shows that it is possible to form a carbon free Nordic energy system. Nordic countries benefit from large hydropower capacity which helps to offset fluctuating nature of wind power. Biomass fuelled generation and nuclear power provide stable and predictable electricity throughout the year. Nuclear power offers better energy security and security of supply than fossil fuelled generation and it is competitive with other low carbon technologies.

Towards sustainable transport: A comparison of demographic and behavioural characteristics of Finnish and international car sharing users

SStrong evidence suggests that the climate is changing and that these changes are largely caused by human activities. A consensus exists among researchers that human activity is causing global warming and that actions to mitigate global warming need to be taken swiftly. The transportation sector, which relies heavily on fossil fuel burning and primarily oil, is one of the big contributors to air pollution problems at local, regional and global levels. It is the fastest growing source of greenhouse gas emissions and is estimated to be responsible for nearly a quarter of global energyrelated carbon dioxide emissions. Car sharing is a mobility solution encouraging its users to decrease private car usage in favour of communal transit and environmental goals. The idea of car sharing originates from the aspiration to decrease personal car ownership and to reduce vehicle distance travelled. This thesis seeks to complement the understanding of Finnish car sharing users and their usage through better categorization. Through better categorization and segmentation of Finnish car sharing users the thesis seeks to provide information for improved marketing insight. Research is done on the demographic and behavioural characteristics of Finnish car sharing users and they are compared with international findings about the characteristics of International car sharing users. The main research problem is Are Finnish car sharing users similar to international ones? A theoretical research framework on the determinants of individual car sharing usage is built based on international research about demographic and behaviouristic characteristics. After this a quantitative survey is performed to the customers of a Finnish car sharing organization. The data analysed in the thesis consist out of 532 answers received from the car sharing organizations customers. The data is analysed with descriptive and other exploratory methods, which create an understanding of Finnish car sharing users. At the end of the analysis the demographic and behavioural characteristics of Finnish car sharing users are compared with international ones. The research findings of the thesis indicate that the demographic and behavioural characteristics of Finnish car sharing usage largely follow those of their international counterparts. Thanks to the thesis results the car sharing organization is able to better target their customers through improved marketing insight.

Transformation of carbon dioxide to diethyl carbonate over ceria and ceria-supported catalysts

Carbon dioxide is regarded, nowadays, as a primary anthropogenic greenhouse gas leading to global warming. Hence, chemical fixation of CO2 has attracted much attention as a possible way to manufacture useful chemicals. One of the most interesting approaches of CO2 transformations is the synthesis of organic carbonates. Since conventional production technologies of these compounds involve poisonous phosgene and carbon monoxide, there is a need to develop novel synthetic methods that would better match the principles of "Green Chemistry" towards protection of the environment and human health. Over the years, synthesis of dimethyl carbonate was under intensive investigation in the academia and industry. Therefore, this study was entirely directed towards equally important homologue of carbonic esters family namely diethyl carbonate (DEC). Novel synthesis method of DEC starting from ethanol and CO2 over heterogeneous catalysts based on ceria (CeO2) was studied in the batch reactor. However, the plausible drawback of the reaction is thermodynamic limitations. The calculated values revealed that the reaction is exothermic (ΔrHØ298K = ─ 16.6 J/ ) and does not occur spontaneously at rooms temperature (ΔrGØ 298K = 35.85 kJ/mol). Moreover, co-produced water easily shifts the reaction equilibrium towards reactants excluding achievement of high yields of the carbonate. Therefore, in-situ dehydration has been applied using butylene oxide as a chemical water trap. A 9-fold enhancement in the amount of DEC was observed upon introduction of butylene oxide to the reaction media in comparison to the synthetic method without any water removal. This result confirms that reaction equilibrium was shifted in favour of the desired product and thermodynamic boundaries of the reaction were suppressed by using butylene oxide as a water scavenger. In order to obtain insight into the reaction network, the kinetic experiments were performed over commercial cerium oxide. On the basis of the selectivity/conversion profile it could be concluded that the one-pot synthesis of diethyl carbonate from ethanol, CO2 and butylene oxide occurs via a consecutive route involving cyclic carbonate as an intermediate. Since commercial cerium oxide suffers from the deactivation problems already after first reaction cycle, in-house CeO2 was prepared applying room temperature precipitation technique. Variation of the synthesis parameters such as synthesis time, calcination temperature and pH of the reaction solution turned to have considerable influence on the physico-chemical and catalytic properties of CeO2. The increase of the synthesis time resulted in high specific surface area of cerium oxide and catalyst prepared within 50 h exhibited the highest amount of basic sites on its surface. Furthermore, synthesis under pH 11 yielded cerium oxide with the highest specific surface area, 139 m2/g, among all prepared catalysts. Moreover, CeO2─pH11 catalyst demonstrated the best catalytic activity and 2 mmol of DEC was produced at 180 oC and 9 MPa of the final reaction pressure. In addition, ceria-supported onto high specific surface area silicas MCM-41, SBA-15 and silica gel were synthesized and tested for the first time as catalysts in the synthesis of DEC. Deposition of cerium oxide on MCM-41 and SiO2 supports resulted in a substantial increase of the alkalinity of the carrier materials. Hexagonal SBA-15 modified with 20 wt % of ceria exhibited the second highest basicity in the series of supported catalysts. Evaluation of the catalytic activity of ceria-supported catalysts showed that reaction carried out over 20 wt % CeO2-SBA-15 generated the highest amount of DEC.

Promoting Growth in the Use of Bioenergy in Europe by Converting Existing Coal-Fired Power Plants to Biomass

Repowering existing power plants by replacing coal with biomass might offer an interesting option to ease the transition from fossil fuels to renewable energy sources and promote a fur-ther expansion of bioenergy in Europe, on account of the potential to decrease greenhouse gas emissions, as well as other pollutants (SOx, NOx, etcetera). In addition, a great part of the appeal of repowering projects comes from the opportunity to reuse the vast existing invest-ment and infrastructure associated with coal-based power generation. Even so, only a limited number of experiences with repowering are found. Therefore, efforts are required to produce technical and scientific evidence to determine whether said technology might be considered feasible for its adoption within European conditions. A detailed evaluation of the technical and economic aspects of this technology constitutes a powerful tool for decision makers to define the energy future for Europe. To better illustrate this concept, a case study is analyzed. A Slovakian pulverized coal plant was used as the basis for determining the effects on perfor-mance, operation, maintenance and cost when fuel is shifted to biomass. It was found that biomass fuel properties play a crucial role in plant repowering. Furthermore, results demon-strate that this technology offers renewable energy with low pollutant emissions at the cost of reduced capacity, relatively high levelized cost of electricity and sometimes, a maintenance-intensive operation. Lastly, regardless of the fact that existing equipment can be reutilized for the most part, extensive additions/modifications may be required to ensure a safe operation and an acceptable performance.

Foreign Direct Investment, Clean Development Mechanism, and Environmental Management: A case of Sub-Saharan Africa

This doctoral dissertation explores the contribution of environmental management practices, the so-called clean development mechanism (CDM) projects, and foreign direct investment (FDI) in achieving sustainable development in developing countries, particularly in Sub- Saharan Africa. Because the climate change caused by greenhouse gas emissions is one of the most serious global environmental challenges, the main focus is on the causal links between carbon dioxide (CO2) emissions, energy consumption, and economic development in Sub-Saharan Africa. In addition, the dissertation investigates the factors that have affected the distribution of CDM projects in developing countries and the relationships between FDI and other macroeconomic variables of interest. The main contribution of the dissertation is empirical. One of the publications uses crosssectional data and Tobit and Poisson regressions. Three of the studies use time-series data and vector autoregressive and vector error correction models, while two publications use panel data and panel data estimation methods. One of the publications uses thus both timeseries and panel data. The concept of Granger causality is utilized in four of the publications. The results indicate that there are significant differences in the Granger causality relationships between CO2 emissions, energy consumption, economic growth, and FDI in different countries. It appears also that the causality relationships change over time. Furthermore, the results support the environmental Kuznets curve hypothesis but only for some of the countries. As to CDM activities, past emission levels, institutional quality, and the size of the host country appear to be among the significant determinants of the distribution of CDM projects. FDI and exports are also found to be significant determinants of economic growth.

Three-dimensional modeling of biomass fuel flow in a circulating fluidized bed furnace

The reduction of greenhouse gas emissions in the European Union promotes the combustion of biomass rather than fossil fuels in energy production. Circulating fluidized bed (CFB) combustion offers a simple, flexible and efficient way to utilize untreated biomass in a large scale. CFB furnaces are modeled in order to understand their operation better and to help in the design of new furnaces. Therefore, physically accurate models are needed to describe the heavily coupled multiphase flow, reactions and heat transfer inside the furnace. This thesis presents a new model for the fuel flow inside the CFB furnace, which acknowledges the physical properties of the fuel and the multiphase flow phenomena inside the furnace. This model is applied with special interest in the firing of untreated biomass. An experimental method is utilized to characterize gas-fuel drag force relations. This characteristic drag force approach is developed into a gas-fuel drag force model suitable for irregular, non-spherical biomass particles and applied together with the new fuel flow model in the modeling of a large-scale CFB furnace. The model results are physically valid and achieve very good correspondence with the measurement results from large-scale CFB furnace firing biomass. With the methods and models presented in this work, the fuel flow field inside a circulating fluidized bed furnace can be modeled with better accuracy and more efficiently than in previous studies with a three-dimensional holistic model frame.

Experimentation on Wind Powered Hydraulic Heating System

It is common knowledge of the world’s dependency on fossil fuel for energy, its unsustainability on the long run and the changing trend towards renewable energy as an alternative energy source. This aims to cut down greenhouse gas emission and its impact on the rate of ecological and climatic change. Quite remarkably, wind energy has been one of many focus areas of renewable energy sources and has attracted lots of investment and technological advancement. The objective of this research is to explore wind energy and its application in household heating. This research aims at applying experimental approach in real time to study and verify a virtually simulated wind powered hydraulic house heating system. The hardware components comprise of an integrated hydraulic pump, flow control valve, hydraulic fluid and other hydraulic components. The system design and control applies hardware in-the-loop (HIL) simulation setup. Output signal from the semi-empirical turbine modelling controls the integrated motor to generate flow. Throttling the volume flow creates pressure drop across the valve and subsequently thermal power in the system to be outputted using a heat exchanger. Maximum thermal power is achieved by regulating valve orifice to achieve optimum system parameter. Savonius rotor is preferred for its low inertia, high starting torque and ease of design and maintenance characteristics, but lags in power efficiency. A prototype turbine design is used; with power output in range of practical Savonius turbine. The physical mechanism of the prototype turbine’s augmentation design is not known and will not be a focus in this study.

Sinfoniaorkesterin hiilijalanjälki. Case: Sinfonia Lahti

Diplomityön tavoitteena on selvittää sinfoniaorkesterin toiminnan merkittävimmät kasvihuonekaasupäästölähteet sekä kuinka kasvihuonekaasupäästöjä voidaan vähentää ja/tai kompensoida niin, että voidaan saavuttaa hiilineutraalius. Tavoitteena on myös tutkia sinfoniaorkesterin vaikutusmahdollisuudet sen sidosryhmiin. Tuloksia tarkastellaan myös globaalissa mittakaavassa, jolloin nähdään millainen vaikutus sinfoniaorkestereiden hiilineutraaliudella olisi ilmastonmuutoksen hillinnässä. Diplomityössä esitetään ensin hiilijalanjälkilaskentaa ja musiikkiteollisuutta yleisesti, jonka jälkeen selvitetään case-tutkimuksena Sinfonia Lahden hiilijalanjälki. Hiilijalanjälkilaskenta perustuu Sinfonia Lahden antamiin tietoihin, minkä lisäksi hyödynnetään diplomityön yhteydessä tehtyjen kyselyjen tuloksia. Kyselyjen tarkoituksena on selvittää sekä Sinfonia Lahden henkilöstön että yleisön matkustustottumuksia. Sinfonia Lahden henkilöstölle järjestettiin myös workshop, jossa tutustuttiin tarkemmin ilmastonmuutokseen. Hiilineutraalius saavutetaan selvittämällä toiminnasta aiheutuvat kasvihuonekaasupäästöt. Tämän jälkeen toimintaa muutetaan vähäpäästöisemmäksi ja lopuksi jäljelle jäävät kasvihuonekaasupäästöt kompensoidaan. Vaikka Sinfonia Lahden merkittävimmät kasvihuonekaasupäästölähteet ovat liikenne sekä energiankulutus, päästövähennyksiä tulee tehdä pysyvästi kaikista mahdollisista toiminnoista. Erityisen tärkeää on saada sidosryhmät osallistumaan sinfoniaorkesterin asettamiin vähennystavoitteisiin. Kompensoinnilla on merkittävä rooli hiilineutraaliuden saavuttamisessa. Tällä hetkellä maailman sinfoniaorkesterit eivät aktiivisesti pyri hiilineutraaliin toimintaan.

Climate change and global responsibility - the role of energy consumption, GDP and CO2 emissions

Climate change is one of the biggest challenges faced by this generation. Despite being the single most important environmental challenge facing the planet and despite over two decades of international climate negotiations, global greenhouse gas (GHG) emissions continue to rise. By the middle of this century, GHGs must be reduced by as much as 40-70% if dangerous climate change is to be avoided. In the Kyoto Protocol no quantitative emission limitation and reduction commitments were placed on the developing countries. For the planning of the future commitments period and possible participation of developing countries, information of the functioning of the energy systems, CO2 emissions development in different sectors, energy use and technological development in developing countries is essential. In addition to the per capita emissions, the efficiency of the energy system in relation to GHG emissions is crucial for the decision of future long-term burden sharing between countries. Country’s future development of CO2 emissions can be defined by the estimated CO2 intensity of the future and the estimated GDP growth. The changes in CO2 intensity depend on several factors, but generally developed countries’ intensity has been increasing in the industrialization phase and decreasing when their economy shifts more towards the system dominated by the service sector. The level of the CO2 intensity depends by a large extent on the production structure and the energy sources that are used. Currently one of the most urgent issues regarding global climate change is to decide the future of the Kyoto Protocol. Negotiations on this topic have already been initiated, with the aim of being finalised by the 2015. This thesis provides insights into the various approaches that can be used to characterise the concept of comparable efforts for developing countries in a future international climate agreement. The thesis examines the post-Kyoto burden sharing questions for developing countries using the contraction and convergence model, which is one approach that has been proposed to allocate commitments regarding future GHG emissions mitigation. This new approach is a practical tool for the evaluation of the Kyoto climate policy process and global climate change negotiations from the perspective of the developing countries.

Production of magnesium carbonates from serpentinites for CO2 mineral sequestration : optimisation towards industrial application

Global warming is one of the most alarming problems of this century. Initial scepticism concerning its validity is currently dwarfed by the intensification of extreme weather events whilst the gradual arising level of anthropogenic CO2 is pointed out as its main driver. Most of the greenhouse gas (GHG) emissions come from large point sources (heat and power production and industrial processes) and the continued use of fossil fuels requires quick and effective measures to meet the world’s energy demand whilst (at least) stabilizing CO2 atmospheric levels. The framework known as Carbon Capture and Storage (CCS) – or Carbon Capture Utilization and Storage (CCUS) – comprises a portfolio of technologies applicable to large‐scale GHG sources for preventing CO2 from entering the atmosphere. Amongst them, CO2 capture and mineralisation (CCM) presents the highest potential for CO2 sequestration as the predicted carbon storage capacity (as mineral carbonates) far exceeds the estimated levels of the worldwide identified fossil fuel reserves. The work presented in this thesis aims at taking a step forward to the deployment of an energy/cost effective process for simultaneous capture and storage of CO2 in the form of thermodynamically stable and environmentally friendly solid carbonates. R&D work on the process considered here began in 2007 at Åbo Akademi University in Finland. It involves the processing of magnesium silicate minerals with recyclable ammonium salts for extraction of magnesium at ambient pressure and 400‐440⁰C, followed by aqueous precipitation of magnesium in the form of hydroxide, Mg(OH)2, and finally Mg(OH)2 carbonation in a pressurised fluidized bed reactor at ~510⁰C and ~20 bar PCO2 to produce high purity MgCO3. Rock material taken from the Hitura nickel mine, Finland, and serpentinite collected from Bragança, Portugal, were tested for magnesium extraction with both ammonium sulphate and bisulphate (AS and ABS) for determination of optimal operation parameters, primarily: reaction time, reactor type and presence of moisture. Typical efficiencies range from 50 to 80% of magnesium extraction at 350‐450⁰C. In general ABS performs better than AS showing comparable efficiencies at lower temperature and reaction times. The best experimental results so far obtained include 80% magnesium extraction with ABS at 450⁰C in a laboratory scale rotary kiln and 70% Mg(OH)2 carbonation in the PFB at 500⁰C, 20 bar CO2 pressure for 15 minutes. The extraction reaction with ammonium salts is not at all selective towards magnesium. Other elements like iron, nickel, chromium, copper, etc., are also co‐extracted. Their separation, recovery and valorisation are addressed as well and found to be of great importance. The assessment of the exergetic performance of the process was carried out using Aspen Plus® software and pinch analysis technology. The choice of fluxing agent and its recovery method have a decisive sway in the performance of the process: AS is recovered by crystallisation and in general the whole process requires more exergy (2.48–5.09 GJ/tCO2sequestered) than ABS (2.48–4.47 GJ/tCO2sequestered) when ABS is recovered by thermal decomposition. However, the corrosive nature of molten ABS and operational problems inherent to thermal regeneration of ABS prohibit this route. Regeneration of ABS through addition of H2SO4 to AS (followed by crystallisation) results in an overall negative exergy balance (mainly at the expense of low grade heat) but will flood the system with sulphates. Although the ÅA route is still energy intensive, its performance is comparable to conventional CO2 capture methods using alkanolamine solvents. An energy‐neutral process is dependent on the availability and quality of nearby waste heat and economic viability might be achieved with: magnesium extraction and carbonation levels ≥ 90%, the processing of CO2‐containing flue gases (eliminating the expensive capture step) and production of marketable products.

Characterization and Investigation on Material Compatibilities of Building Integrated Photovoltaic Module Components

Building Integrated Photovoltaics (BIPV) are considered as the future of photovoltaic (PV) technology. The advantage of BIPV system is its multi-functionality; they fulfil the functions of a building envelope with the added benefit of generating power by replacing the traditional roofing and façade materials with PV that generate power. In this thesis, different types of PV cells and modules have been described in detail with their efficiencies and usage trends in the last decade. The different BIPV products for roof and façade are discussed in detail giving several examples. The electricity generation potential of BIPV in selected countries is compared with their actual electricity consumption. Further, the avoided greenhouse gas (GHG) emissions associated with electricity generation from traditional sources and transportation and distribution (T&D) losses are calculated. The results illustrate huge savings in GHGs. In BIPV different types of façade and backsheets are used. In this thesis, selected backsheets and façade were characterized in terms of their surface structure identification using infrared spectroscopy (FTIR-ATR), scanning electron microscopy with energy dispersive X-ray (SEM-EDX) and physical characterization using surface energy measurements. By using FTIR-ATR, surface polymeric materials were identified and with SEM-EDX, identification of the surface elements was possible. Surface energy measurements were useful in finding the adhesives and knowing the surface energies of the various backsheets and façade. The strength of adhesion between the facade and backsheets was studied using peel test. Four different types of adhesives were used to study the fracture pattern and peel tests values to identify the most suitable adhesive. It was found out that pretreatment increased the adhesive strength significantly.

Vuotovesien merkitys jätevesihuollossa

Yleisimmät viemäröintijärjestelmät ovat erillisviemäröinti ja sekaviemäröinti. Erillisviemä-röinnissä jäte- ja hulevedet johdetaan omissa verkostoissa. Sekaviemäröinnissä kaikki viemä-röitävät vedet virtaavat samassa verkostossa. Vuotoveden osuus jätevesiviemäriverkostossa virtaavasta jätevedestä on keskimäärin yli 30 prosenttia. Vuotovesiselvityksen avulla pyritään selvittämään vuotoveden esiintymisalueet ja mahdolliset vuotokohteet. Mallintamalla laadittu selvitys tarjoaa mahdollisuuden tarkastella verkostoa kokonaisuutena ja erilaisissa käyttötilan-teissa. Tämä työ perustuu Joensuun kantakaupungin viemäriverkostosta mallintamalla laadit-tuun vuotovesiselvitykseen. Työssä on tarkoitus selvittää vuotovesistä aiheutuvan lisäener-giantarpeen ja kasvihuonekaasupäästöjen kasvua sekä pohtia verkoston omistussuhteiden, sään ääri-ilmiöiden ja taajuusmuuttajien vaikutuksia vuotovesien hallintaan. Lisäksi selvitetään voidaanko tuloksista tehdä valtakunnallisia yleistyksiä. Joensuun viemäriverkostossa jätevesien pumppaukseen käytetystä energiasta noin 43 prosent-tia kuluu vuotovesien pumppaukseen. Siitä aiheutuu vuosittain 480 MWh:n lisäenergiantarve, joka johtaa 106 tonnin hiilidioksidipäästöihin. Lisäenergiantarpeesta aiheutuva hiilidioksidi-päästö on pieni liikenteen aiheuttamaan päästöön verrattuna. Saneerauksilla voidaan saavuttaa 60 prosentin vähennys vuotovesimäärään. Tavoitteeksi tulisi asettaa keskusta-alueella olevien sekaviemäreiden korvaaminen erillisviemäreillä esimerkiksi lähimmän 10 vuoden aikana ja vuotovesimäärän yleinen vähentäminen koko verkoston alueella. Ilmastonmuutoksen myötä yleistyvät rankkasateet lisäävät vuotovesimäärää etenkin sekaviemäröidyillä alueilla. Tämä korostaa sekaviemäröidyn verkoston korjaustoimenpiteiden tärkeyttä. Taajuusmuuttajien yleistyvä käyttö tasaa haitallisia virtaamapiikkejä. Optimaaliseksi säädetty pyörimisnopeus pienentää merkittävästi pumppujen energiankulutusta. Työstä saadut tulokset ovat valtakun-nallisella tasolla suuntaa antavia. Tarkemmat yleistykset vaativat useista erikokoisista verkos-toista tehtyjen vuotovesiselvitystulosten analysointia.