Remote sensing for three-dimensional modelling of hydromorphology

Successful management of rivers requires an understanding of the fluvial processes that govern them. This, in turn cannot be achieved without a means of quantifying their geomorphology and hydrology and the spatio-temporal interactions between them, that is, their hydromorphology. For a long time, it has been laborious and time-consuming to measure river topography, especially in the submerged part of the channel. The measurement of the flow field has been challenging as well, and hence, such measurements have long been sparse in natural environments. Technological advancements in the field of remote sensing in the recent years have opened up new possibilities for capturing synoptic information on river environments. This thesis presents new developments in fluvial remote sensing of both topography and water flow. A set of close-range remote sensing methods is employed to eventually construct a high-resolution unified empirical hydromorphological model, that is, river channel and floodplain topography and three-dimensional areal flow field. Empirical as well as hydraulic theory-based optical remote sensing methods are tested and evaluated using normal colour aerial photographs and sonar calibration and reference measurements on a rocky-bed sub-Arctic river. The empirical optical bathymetry model is developed further by the introduction of a deep-water radiance parameter estimation algorithm that extends the field of application of the model to shallow streams. The effect of this parameter on the model is also assessed in a study of a sandy-bed sub-Arctic river using close-range high-resolution aerial photography, presenting one of the first examples of fluvial bathymetry modelling from unmanned aerial vehicles (UAV). Further close-range remote sensing methods are added to complete the topography integrating the river bed with the floodplain to create a seamless high-resolution topography. Boat- cart- and backpack-based mobile laser scanning (MLS) are used to measure the topography of the dry part of the channel at a high resolution and accuracy. Multitemporal MLS is evaluated along with UAV-based photogrammetry against terrestrial laser scanning reference data and merged with UAV-based bathymetry to create a two-year series of seamless digital terrain models. These allow the evaluation of the methodology for conducting high-resolution change analysis of the entire channel. The remote sensing based model of hydromorphology is completed by a new methodology for mapping the flow field in 3D. An acoustic Doppler current profiler (ADCP) is deployed on a remote-controlled boat with a survey-grade global navigation satellite system (GNSS) receiver, allowing the positioning of the areally sampled 3D flow vectors in 3D space as a point cloud and its interpolation into a 3D matrix allows a quantitative volumetric flow analysis. Multitemporal areal 3D flow field data show the evolution of the flow field during a snow-melt flood event. The combination of the underwater and dry topography with the flow field yields a compete model of river hydromorphology at the reach scale.

Three-dimensional modeling of biomass fuel flow in a circulating fluidized bed furnace

The reduction of greenhouse gas emissions in the European Union promotes the combustion of biomass rather than fossil fuels in energy production. Circulating fluidized bed (CFB) combustion offers a simple, flexible and efficient way to utilize untreated biomass in a large scale. CFB furnaces are modeled in order to understand their operation better and to help in the design of new furnaces. Therefore, physically accurate models are needed to describe the heavily coupled multiphase flow, reactions and heat transfer inside the furnace. This thesis presents a new model for the fuel flow inside the CFB furnace, which acknowledges the physical properties of the fuel and the multiphase flow phenomena inside the furnace. This model is applied with special interest in the firing of untreated biomass. An experimental method is utilized to characterize gas-fuel drag force relations. This characteristic drag force approach is developed into a gas-fuel drag force model suitable for irregular, non-spherical biomass particles and applied together with the new fuel flow model in the modeling of a large-scale CFB furnace. The model results are physically valid and achieve very good correspondence with the measurement results from large-scale CFB furnace firing biomass. With the methods and models presented in this work, the fuel flow field inside a circulating fluidized bed furnace can be modeled with better accuracy and more efficiently than in previous studies with a three-dimensional holistic model frame.

Empirical studies on software quality construction: Exploring human factors and organizational influences

Software quality has become an important research subject, not only in the Information and Communication Technology spheres, but also in other industries at large where software is applied. Software quality is not a happenstance; it is defined, planned and created into the software product throughout the Software Development Life Cycle. The research objective of this study is to investigate the roles of human and organizational factors that influence software quality construction. The study employs the Straussian grounded theory. The empirical data has been collected from 13 software companies, and the data includes 40 interviews. The results of the study suggest that tools, infrastructure and other resources have a positive impact on software quality, but human factors involved in the software development processes will determine the quality of the products developed. On the other hand, methods of development were found to bring little effect on software quality. The research suggests that software quality is an information-intensive process whereby organizational structures, mode of operation, and information flow within the company variably affect software quality. The results also suggest that software development managers influence the productivity of developers and the quality of the software products. Several challenges of software testing that affect software quality are also brought to light. The findings of this research are expected to benefit the academic community and software practitioners by providing an insight into the issues pertaining to software quality construction undertakings.

Exploring business models for medical games: Key components and challenges

The costs of health care are going up in many countries. In order to provide affordable and effective health care solutions, new technologies and approaches are constantly being developed. In this research, video games are presented as a possible solution to the problem. Video games are fun, and nowadays most people like to spend time on them. In addition, recent studies have pointed out that video games can have notable health benefits. Health games have already been developed, used in practice, and researched. However, the bulk of health game studies have been concerned with the design or the effectiveness of the games; no actual business studies have been conducted on the subject, even though health games often lack commercial success despite their health benefits. This thesis seeks to fill this gap. The specific aim of this thesis is to develop a conceptual business model framework and empirically use it in explorative medical game business model research. In the first stage of this research, a literature review was conducted and the existing literature analyzed and synthesized into a conceptual business model framework consisting of six dimensions. The motivation behind the synthesis is the ongoing ambiguity around the business model concept. In the second stage, 22 semi-structured interviews were conducted with different professionals within the value network for medical games. The business model framework was present in all stages of the empirical research: First, in the data collection stage, the framework acted as a guiding instrument, focusing the interview process. Then, the interviews were coded and analyzed using the framework as a structure. The results were then reported following the structure of the framework. In the results, the interviewees highlighted several important considerations and issues for medical games concerning the six dimensions of the business model framework. Based on the key findings of this research, several key components of business models for medical games were identified and illustrated in a single figure. Furthermore, five notable challenges for business models for medical games were presented, and possible solutions for the challenges were postulated. Theoretically, these findings provide pioneering information on the untouched subject of business models for medical games. Moreover, the conceptual business model framework and its use in the novel context of medical games provide a contribution to the business model literature. Regarding practice, this thesis further accentuates that medical games can offer notable benefits to several stakeholder groups and offers advice to companies seeking to commercialize these games.

Analysis of testicular cell populations using flow cytometry

Studying testis is complex, because the tissue has a very heterogeneous cell composition and its structure changes dynamically during development. In reproductive field, the cell composition is traditionally studied by morphometric methods such as immunohistochemistry and immunofluorescence. These techniques provide accurate quantitative information about cell composition, cell-cell association and localization of the cells of interest. However, the sample preparation, processing, staining and data analysis are laborious and may take several working days. Flow cytometry protocols coupled with DNA stains have played an important role in providing quantitative information of testicular cells populations ex vivo and in vitro studies. Nevertheless, the addition of specific cells markers such as intracellular antibodies would allow the more specific identification of cells of crucial interest during spermatogenesis. For this study, adult rat Sprague-Dawley rats were used for optimization of the flow cytometry protocol. Specific steps within the protocol were optimized to obtain a singlecell suspension representative of the cell composition of the starting material. Fixation and permeabilization procedure were optimized to be compatible with DNA stains and fluorescent intracellular antibodies. Optimization was achieved by quantitative analysis of specific parameters such as recovery of meiotic cells, amount of debris and comparison of the proportions of the various cell populations with already published data. As a result, a new and fast flow cytometry method coupled with DNA stain and intracellular antigen detection was developed. This new technique is suitable for analysis of population behavior and specific cells during postnatal testis development and spermatogenesis in rodents. This rapid protocol recapitulated the known vimentin and γH2AX protein expression patterns during rodent testis ontogenesis. Moreover, the assay was applicable for phenotype characterization of SCRbKO and E2F1KO mouse models.

Business models for Finnish biobanks

This study concentrates on developing a suitable business model for Finnish biobanks, with particular emphasis on value creation to stakeholders. The sub-objective of this thesis are to map the commercial possibilities of biobanks and potential barriers for business development. The study approaches the subject from the biobanks’ as well as the stakeholders’ point of view, integrating their hopes and needs considering current and future co-operation into the findings. In 2013 the Biobank Act came into effect, after which six biobanks have been established and several other pending biobank projects are in process. There is relatively little research in regard to the commercial opportunities of this newcomer of the biomedical industry, and particularly in the Finnish markets. Therefore, the aim of this study is to partially fill the research gap of the commercial potential of biobanks and particularly outline the problematic elements in developing business. The theoretical framework consists of a few select theories, which depict business modeling and value creation of organizations. The theories are combined to form a synthesis, which best adapts to biobanks, and acts as a backbone for interviews. The empirical part of the study was conducted mainly by seven face-to-face interviews, and complemented by two phone interviews and an e-mail questionnaire with four responses. The findings consist mainly of the participants’ reflections on the potential products and services enabled by consumer genomics, as well as perceptions on different obstacles for biobanks’ business development. The nature of the study is tentative, as biobanks are relatively new organizations in Finland, and their operation models and activities are still molding. The aim is to bring to surface the hopes and concerns of biobanks’ representatives, as well as the representatives of stakeholders, in order to transparently discuss the current situation and suggestions for further development. The study concludes that in principle, the interviewees’ agree on the need for development in order not to waste the potential of biobanks; regardless, the participants emphasize different aspects and subsequently lean on differing methods.

Foreign exchange exposure management in a fuel procurement company operating in the commodity markets

Fluctuating commodity prices, foreign exchange rates and interest rates are causing changes in cash flows, market value and the companies’ profit. Most of the commodities are quoted in US dollar. Companies with non-dollar accounting face a double risk in the form of the commodity price risk and foreign exchange risk. The objective of this Master’s thesis is to find out how companies under commodity should manage foreign exchange exposure. The theoretical literature is based on foreign exchange risk, commodity risk and foreign exchange exposure management. The empirical research is done by using constructive modelling of a case company in the oil industry. The exposure is model with foreign exchange net cash flow and net working capital. First, the factors affecting foreign exchange exposure in case company are analyzed, then a model of foreign exchange exposure is created. Finally, the models are compared and the most suitable method is defined. According to the literature, foreign exchange exposure is the foreign exchange net cash flow. However, the results of the study show that foreign exchange risk can be managed also with net working capital. When the purchases, sales and storage are under foreign exchange risk, the best way to manage foreign exchange exposure is with combined net cash flow and net working capital method. The foreign exchange risk policy of the company defines the appropriate way to manage foreign exchange risk.

Business models for Finnish biobanks

This study concentrates on developing a suitable business model for Finnish biobanks, with particular emphasis on value creation to stakeholders. The sub-objective of this thesis are to map the commercial possibilities of biobanks and potential barriers for business development. The study approaches the subject from the biobanks’ as well as the stakeholders’ point of view, integrating their hopes and needs considering current and future co-operation into the findings. In 2013 the Biobank Act came into effect, after which six biobanks have been established and several other pending biobank projects are in process. There is relatively little research in regard to the commercial opportunities of this newcomer of the biomedical industry, and particularly in the Finnish markets. Therefore, the aim of this study is to partially fill the research gap of the commercial potential of biobanks and particularly outline the problematic elements in developing business. The theoretical framework consists of a few select theories, which depict business modeling and value creation of organizations. The theories are combined to form a synthesis, which best adapts to biobanks, and acts as a backbone for interviews. The empirical part of the study was conducted mainly by seven face-to-face interviews, and complemented by two phone interviews and an e-mail questionnaire with four responses. The findings consist mainly of the participants’ reflections on the potential products and services enabled by consumer genomics, as well as perceptions on different obstacles for biobanks’ business development. The nature of the study is tentative, as biobanks are relatively new organizations in Finland, and their operation models and activities are still molding. The aim is to bring to surface the hopes and concerns of biobanks’ representatives, as well as the representatives of stakeholders, in order to transparently discuss the current situation and suggestions for further development. The study concludes that in principle, the interviewees’ agree on the need for development in order not to waste the potential of biobanks; regardless, the participants emphasize different aspects and subsequently lean on differing methods.

Pienyrityksen arvonmääritys yrityskauppatilanteessa

Tämän Pro-gradu tutkielman tavoitteena on tutkia, miten pienyrityksen arvo määrittyy yrityskauppatilanteessa. Tämän lisäksi tutkimus pyrkii selvittämään millaisia erityispiirteitä pienyrityksen arvonmääritykseen liittyy ja miten eri arvonmääritysmenetelmät soveltuvat pienyrityksen arvonmääritykseen. Empiirinen tutkimus koostuu kolmesta yrityskauppaan ja arvonmääritykseen keskittyneen asiantuntijan haastattelusta. Haastattelujen avulla on tarkoitus lisätä ymmärrystä pienyritysten arvonmäärityksestä, sen erityispiirteistä, soveltuvista arvonmääritysmenetelmistä sekä siitä, miten lopullinen arvo muodostuu. Tutkimuksen tulokset osoittavat, että pienyrityksen arvon määrittäminen on vaativa prosessi, jossa on otettava huomioon monia erityisiä piirteitä. Yhtä oikeaa arvonmääritysmenetelmää ei ole vaan useita eri menetelmiä käytetään rinnakkain luotettavan arvon muodostamiseksi. Tärkeimpänä huomioitavana piirteenä esille nousi yrityksen tulevaisuuden ennustamisen hankaluus, minkä takia tulevaisuudelle ei anneta paljoa painoarvoa pienyrityksen arvonmäärityksessä. Tämä vaikuttaa olennaisesti käytettäviin arvonmääritysmenetelmiin ja niiden luotettavuuteen. Rahoitusteoreettisesti oikeaoppisin arvonmääritysmenetelmä, vapaan kassavirran malli, ei tulosten perusteella ole soveltuvin malli kaikkien pienyritysten kohdalla. Syynä tähän on, että suuri osa yrityksen arvosta muodostuu tulevaisuuden kassavirroista, joita pienyrityksen kohdalla on haasteellista ennustaa. Kaikki asiantuntijat käyttivät jokaisen pienyrityksen arvonmäärityksen yhteydessä markkinapohjaisia kertoimia, mutta tämänkin mallin käytön yhteydessä on omat haasteensa ja vaatii arvonmäärittäjältä syvällistä osaamista yrityksen toimialasta. Arvonmäärityksen lisäksi pienyrityksen toiminnan luonne lisää omat erityispiirteet, jotka huomioidaan arvoa laskevina riskitekijöinä. Pienyrityksen toiminta kiteytyy usein yrittäjän osaamiseen, joka koetaan suurena riskinä yrityskaupassa ja täten lopullista arvoa laskevana tekijänä. Voidaankin todeta, että pienyrityksen kohdalla arvonmääritys luo pohjan sekä raja-arvot ostettavasta yrityksestä maksettavalle hinnalle, mutta lopullinen kauppahinta muodostuu neuvottelujen lopputuloksena.

The flow of reality’s development: from postmodernism to post-postmodernism in John Irving’s The World According to Garp and Last Night in Twisted River

In this master’s thesis, I examine the development of writer-characters and metafiction from John Irving’s The World According to Garp to Last Night in Twisted River and how this development relates to the development of late twentieth century postmodern literary theory to twenty-first century post-postmodern literary theory. The purpose of my study is to determine how the prominently postmodern feature metafiction, created through the writer-character’s stories-within-stories, has changed in form and function in the two novels published thirty years apart from one another, and what possible features this indicates for future post-postmodern theory. I establish my theoretical framework on the development of metafiction largely on late twentieth-century models of author and authorship as discussed by Roland Barthes, Wayne Booth and Michel Foucault. I base my close analysis of metafiction mostly on Linda Hutcheon’s model of overt and covert metafiction. At the end of my study, I examine Irving’s later novel through Suzanne Rohr’s models of reality constitution and fictional reality. The analysis of the two novels focuses on excerpts that feature the writer-characters, their stories-within-stories and the novels’ other characters and the narrators’ evaluations of these two. I draw examples from both novels, but I illustrate my choice of focus on the novels at the beginning of each section. Through this, I establish a method of analysis that best illustrates the development as a continuum from pre-existing postmodern models and theories to the formation of new post-postmodern theory. Based on my findings, the thesis argues that twenty-first century literary theory has moved away from postmodern overt deconstruction of the narrative and its meaning. New post-postmodern literary theory reacquires the previously deconstructed boundaries that define reality and truth and re-establishes them as having intrinsic value that cannot be disputed. In establishing fictional reality as self-governing and non-intrudable, post-postmodern theory takes a stance against postmodern nihilism, which indicates the re-founded, non-questionable value of the text’s reality. To continue mapping other possible features of future post-postmodern theory, I recommend further analysis solely on John Irving’s novels’ published in the twenty-first century.

A Numerical study of fluid flow in peristaltic pumps and polymeric elastic pipes

This thesis work deals with a mathematical description of flow in polymeric pipe and in a specific peristaltic pump. This study involves fluid-structure interaction analysis in presence of complex-turbulent flows treated in an arbitrary Lagrangian-Eulerian (ALE) framework. The flow simulations are performed in COMSOL 4.4, as 2D axial symmetric model, and ABAQUS 6.14.1, as 3D model with symmetric boundary conditions. In COMSOL, the fluid and structure problems are coupled by monolithic algorithm, while ABAQUS code links ABAQUS CFD and ABAQUS Standard solvers with single block-iterative partitioned algorithm. For the turbulent features of the flow, the fluid model in both codes is described by RNG k-ϵ. The structural model is described, on the basis of the pipe material, by Elastic models or Hyperelastic Neo-Hookean models with Rayleigh damping properties. In order to describe the pulsatile fluid flow after the pumping process, the available data are often defective for the fluid problem. Engineering measurements are normally able to provide average pressure or velocity at a cross-section. This problem has been analyzed by McDonald's and Womersley's work for average pressure at fixed cross section by Fourier analysis since '50, while nowadays sophisticated techniques including Finite Elements and Finite Volumes exist to study the flow. Finally, we set up peristaltic pipe simulations in ABAQUS code, by using the same model previously tested for the fl uid and the structure.