72 resultados para Damage recovery
Resumo:
This book was created as postgraduate lecture notes for Lappeenranta University of Technology's special course of steam power plants. But as with anything ever written the ideas shown have nurtured for a long time. Parts of these chapters have appeared elsewhere as individual papers or work documents. One of the most helpful episodes have been presentations and discussions during Pohto Operator training seminars. Input from those sessions can be seen in chapter firing. You who run recovery boilers, I salute you. The purpose of this text is to give the reader an overview of recovery boiler operation. Most parts of the recovery boiler operation are common to boilers burning other fuels. The furnace operation differs significantly from operation of other boiler furnaces. Oxygen rich atmosphere is needed to burn fuel efficiently. But the main function of recovery boiler is to reduce spent cooking chemicals. Reduction reactions happen best in oxygen deficient atmosphere. This dual, conflicting nature of recovery furnace makes understanding it so challenging. To understand the processes happening in the recovery furnace one must try to understand the detailed processes that might occur and their limitations. Therefore chapters on materials, corrosion and fouling have been added.
Resumo:
A method to synthesize ethyl β-ᴅ-glucopyranoside (BEG) was searched. Feasibility of different ion exchange resins was examined to purify the product from the synthetic binary solution of BEG and glucose. The target was to produce at least 50 grams of 99 % pure BEG with a scaled up process. Another target was to transfer the batch process into steady-state recycle chromatography process (SSR). BEG was synthesized enzymatically with reverse hydrolysis utilizing β-glucosidase as a catalyst. 65 % of glucose reacted with ethanol into BEG during the synthesis. Different ion exchanger based resins were examined to separate BEG from glucose. Based on batch chromatography experiments the best adsorbent was chosen between styrene based strong acid cation exchange resins (SAC) and acryl based weak acid cation exchange resins (WAC). CA10GC WAC resin in Na+ form was chosen for the further separation studies. To produce greater amounts of the product the batch process was scaled up. The adsorption isotherms for the components were linear. The target purity was possible to reach already in batch without recycle with flowrate and injection size small enough. 99 % pure product was produced with scaled-up batch process. Batch process was transferred to SSR process utilizing the data from design pulse chromatograms and Matlab simulations. The optimal operating conditions for the system were determined. Batch and SSR separation results were compared and by using SSR 98 % pure products were gained with 40 % higher productivity and 40 % lower eluent consumption compared to batch process producing as pure products.
Resumo:
Meesauuni on osa sulfaattisellutehdasta ja sen kemikaalikiertoa. Se on pyörivä kaltevaan tasoon asetettu rumpu-uuni, joka voi olla jopa 160 metriä pitkä ja halkaisijaltaan 5,5 metriä. Kalkki on kiertävä apukemikaali, jota käytetään soodakattilalta tulevan viherlipeän muuttamiseen valkolipeäksi. Meesauunin tehtävänä on kierrättää kalkki (CaO) uudelleen käytettäväksi kaustisoinnissa syntyneestä meesasta (CaCO3). Meesauunin vaipan konepajavalmistus on prosessina hyvin yksinkertainen, mutta toleranssivaatimukset ovat hyvin tiukat suhteutettuna meesauunin kokoon. Vaippalohkojen valmistus on siirtynyt halpatyövoiman maihin lähelle loppukäyttäjiä, joten vaatimukset piirustusten laadulle, valmistukselle, ohjeille ja tarkastamiselle ovat lisääntyneet. Uunin vaippa toimitetaan asennuspaikalle useassa lohkossa ja jokainen vaippalohko on tarkastettava ennen toimitusta. Virheellisten vaippalohkojen siirtyminen asennuspaikalle on estettävä. Työn tavoitteena oli parantaa meesauunin vaippalohkojen konepajavalmistuksen laaduntarkastusta. Tässä työssä tutkitaan mittausmenetelmiä vaippalohkojen geometrian mittaamiseen. Tärkeimmät uunin toiminnallisiin ominaisuuksiin vaikuttavat muototoleranssit vaippalohkoille ovat ympyrämäisyys ja keskiviivan suoruus. Virheet näissä toleransseissa aiheuttavat vaurioita uunin muurauksille ja liian suuria kuormituksia tuennoille. Vaippalohkot on mitattava pyöritysrullaston päällä ja konepajan olosuhteissa, mikä aiheuttaa omat haasteensa. Vaippalohkojen suuret massat ja dimensiot aiheuttavat vaippalohkoihin muodonmuutoksia. Muodonmuutokset täytyy olla hallinnassa, mikäli halutaan käyttää CMS-laitteistoja (Coordinate Measuring System). Meesauunin vaippalohkot ovat mitattavissa radiaalimittauksina tai käyttäen CMS-laitteistoja.
Resumo:
Alfa Laval Aalborg Oy designs and manufactures waste heat recovery systems utilizing extended surfaces. The waste heat recovery boiler considered in this thesis is a water-tube boiler where exhaust gas is used as the convective heat transfer medium and water or steam flowing inside the tubes is subject to cross-flow. This thesis aims to contribute to the design of waste heat recovery boiler unit by developing a numerical model of the H-type finned tube bundle currently used by Alfa Laval Aalborg Oy to evaluate the gas-side heat transfer performance. The main objective is to identify weaknesses and potential areas of development in the current H-type finned tube design. In addition, numerical simulations for a total of 15 cases with varying geometric parameters are conducted to investigate the heat transfer and pressure drop performance dependent on H-type fin geometry. The investigated geometric parameters include fin width and height, fin spacing, and fin thickness. Comparison between single and double tube type configuration is also conducted. Based on the simulation results, the local heat transfer and flow behaviour of the H-type finned tube is presented including boundary layer development between the fins, the formation of recirculation zone behind the tubes, and the local variations of flow velocity and temperature within the tube bundle and on the fin surface. Moreover, an evaluation of the effects of various fin parameters on heat transfer and pressure drop performance of H-type finned tube bundle has been provided. It was concluded that from the studied parameters fin spacing and fin width had the most significant effect on tube bundle performance and the effect of fin thickness was the least important. Furthermore, the results suggested that the heat transfer performance would increase due to enhanced turbulence if the current double tube configuration is replaced with single tube configuration, but further investigation and experimental measurements are required in order to validate the results.
Resumo:
The aim of this work was to study techniques to extract and purify of anthocyanins from purple-blue potato. This topic was determined as a master’s thesis and it was done in collaboration with the Food Chemistry and Food Development Department of University of Turku and Department of Chemical and Process Engineering at Lappeenranta University of Technology. At first, purple-blue potatoes were pretreated in four types of boiled, raw, freeze-dried and dried boiled potato for extraction. They were mixed with aqueous acidified ethanol (ethanol:water:acetic acid 40%:53%:7% v/v) for conventional extraction. Boiled potato was selected as a best pretreated potato. Different ethanol concentration and extraction time were examined and the mixture of 80% in 24 h resulted in maximum anthocyanin content (132.23 mg/L). As conventional extraction method of anthocyanins was non-selective, some of impurities such as free sugars might accelerate anthocyanin degradation. Therefore, to obtain anthocyanins in purified form, adsorption as a promising selective method was used to recovery and isolate anthocyanins. It was carried out with six adsorbents. Among those, Amberlite XAD-7HP, a nonionic acrylic ester adsorbent, was found to have the best performance. In an adsorption column, flow rate of 3 mL/min was selected as the loading flow rate among four tested flow rates. Eluent volume and flow rate were 3 BV of aqueous acidified ethanol (75%, v/v) and 1 mL/min for desorption. The quantification of the total anthocyanin contents was performed by pH-differential method using UV-vis spectrophotometer. The resulting anthocyanin solution after purification was almost free from free sugars which were the major cause for degradation of anthocyanins. The average anthocyanin concentration in the purified and concentrated sample was obtained 1752.89 mg/L.
Resumo:
Tutkielma käsittelee Yhdysvaltain CIAn miehittämättömiä lennokki-iskuja Pakistanissa kansainvälisen humanitaarisen oikeuden suhteellisuusperiaatteen näkökulmasta. Suhteellisuusperiaatteen mukaan aseellisista iskuista saatavan sotilaallisen hyödyn tulee olla suhteellinen verrattuna siviileille aiheutuvaan haittaan. CIAn iskuja Pakistanissa on kritisoitu, että ne eivät täytä suhteellisuusperiaatteen asettamia vaatimuksia. Tutkielmassa perehdytään ensinnäkin selvittämään ne velvollisuudet, jotka suhteellisuusperiaate asettaa hyökkääjille. Sen jälkeen CIAn lennokki-iskuja tutkitaan näiden velvollisuuksien valossa. Tutkielmassa pyritään selvittämään antaako suhteellisuusperiaatteen luomat oikeudelliset velvollisuudet riittävää suojaa Pakistanin siviileille lennokki-iskujen tuhoja vastaan. Lisäksi pyritään selvittämään, onko lennokki-iskuissa viitteitä suhteellisuusperiaatteen vastaisista iskuista. Tutkimusmenetelmänä käytetään positivistista lainopin metodia, jonka avulla selvitetään voimassa olevaa kansainvälisen humanitaarisen tapaoikeuden suhteellisuusperiaatteen sisältöä. Oikeudellisina lähteinä käytetään pääasiassa humanitaarista tapaoikeutta, mutta tulkinnallisena apuna myös kansainvälisiä sopimuksia sekä oikeuden päätöksiä. Lisäksi oikeudellinen kirjallisuus on tutkimuksessa tärkeässä asemassa. Tutkimuksessa päädytään siihen, että suhteellisuusperiaatteen asettamat velvollisuudet hyökkääjälle ovat niin epämääräiset, että ne eivät anna riittävää suojaa siviileille. Ensinnäkin hyökkääjä voi määrittää sotilaallisen hyödyn omien päämääriensä mukaisesti suhteellisuusanalyysissä. Lisäksi kynnys sille, mikä katsotaan suhteellisuusperiaatteen vastaisuudeksi on hyvin epämääräinen ja korkea. Tämän vuoksi varotoimenpiteet iskujen suunnittelussa ovat hyvin tärkeässä asemassa myös suhteellisuusanalyysissä. Kuitenkin jos hyökkääjä edes jossain määrin osoittaa, että on tehnyt iskut hyvässä uskossa niiden laillisuudesta, iskujen katsotaan yleensä olevan suhteellisuusperiaatteen mukaisia. CIAn lennokki-iskuissa Pakistanissa on viitteitä suhteellisuusperiaatteen vastaisuudesta erityisesti ”tunnusmerkki-iskujen” osalta. ”Tunnusmerkki-iskut” johtavat yleensä vain vähäiseen sotilaalliseen hyötyyn aiheuttaen silti siviiliuhreja. Lisäksi erityisesti tunnusmerkki-iskuissa edellytetään korkeampaa tarkkuutta varotoimenpiteissä. Kuitenkin useat siviiliuhrit voivat merkitä sitä, että näitä varotoimenpiteitä ei ole noudatettu iskuissa.
Resumo:
Hemicelluloses are potential raw material for several items produced in future wood-based biorefineries. One possible method for recovering hemicelluloses from wood extracts is ultrafiltration (UF). However, low filtration capacities and severe fouling restrict the use of tight UF membranes in the treatment of wood extracts. The lack of suitable commercial membranes creates a need for pretreatment which would decrease fouling and increase the filtration capacity. This thesis focuses on the evaluation of the possibility to improve the filtration capacity and decrease fouling with the pretreatment of wood extracts. Methods which remove harmful compounds and methods which degrade them are studied, as well as combinations of the methods. The tested pretreatments have an influence on both the concentration of different compounds and the molecular mass distribution of the compounds in the extract. This study revealed that in addition to which kind of compounds were removed, also the change in molecular size distribution affected the filtration capacity significantly. It was shown that the most harmful compounds for the filtration capacity of the hydrophobic 5 kDa membrane were the ones capable of permeating the membrane and fouling also the inner membrane structure. Naturally, the size of the most harmful compounds depends on the used UF membrane and is thus case-specific. However, in the choice of the pretreatment method, the focus should be on the removal of harmful compound sizes rather than merely on the total amount of removed foulants. The results proved that filtration capacity can be increased with both adsorptive and oxidative pretreatments even by hundreds of per cents. For instance, the use of XAD7 and XAD16 adsorbents increased the average flux in the UF of a birch extract from nearly zero to 107 kg/(m2h) and 175 kg/(m2h), respectively. In the treatment of a spruce extract, oxidation by pulsed corona discharge (PCD) increased the flux in UF from 46 kg/(m2h) to 158 kg/(m2h). Moreover, when a birch extract batch was treated with laccase enzyme, the flux in UF increased from 15 kg/(m2h) to 36 kg/(m2h). However, fouling was decreased only by adsorptive pretreatment while oxidative methods had a negligible or even negative impact on it. This demonstrates that filtration capacity and fouling are affected by different compounds and mechanisms. The results of this thesis show that filtration capacity can be improved and fouling decreased through appropriate pretreatment. However, the choice of the best possible pretreatment is case-specific and depends on the wood extract and the membrane used. Finding the best option requires information on the extract content and membrane characteristics as well as on the filtration performance of the membrane in the prevailing conditions and a multivariate approach. On the basis of this study, it can be roughly concluded that adsorptive pretreatment improves the filtration capacity and decreases fouling rather reliably, but it may lead to significant hemicellulose losses. Oxidation reduces the loss of valuable hemicelluloses and could improve the filtration capacity, but fouling challenges may remain. Combining oxidation with adsorptive pretreatment was not a solution for avoiding hemicellulose losses in the tested cases.
Resumo:
Biodegradable waste quantities in Lithuania and their potential for the co-treatment in renewable energy and organic fertilizer production are investigated. Two scenarios are formulated to study the differences of the amounts of obtainable energy and fertilizers between different ways of utilization. In the first scenario, only digestion is used, and in the second scenario, other materials than straw are digested, and straw and the solid fraction of sewage sludge digestate are combusted. As a result, the amounts of heat and electricity, as well as the fertilizer amounts in the counties are obtained for both scenarios. Based on this study, the share of renewable energy in Lithuania could be doubled by the co-treatment of different biodegradable materials.