What is left of leadership when the leader is gone?

Tässä kandidaatintyössä tutkitaan voidaanko organisaatioissa määrittää johtajuutta, joka ei ole henkilöitynyt. Jos voidaan, mikä on ei henkilöön sitoutuneen henkilöitymättömän johtajuuden määritelmä ja mitkä ovat tällaisen johtajuuden elementit.

Vibrations in Rotating Machinery Arising from Minor Imperfections in Component Geometries

Vibrations in machines can cause noise, decrease the performance, or even damage the machine. Vibrations appear if there is a source of vibration that excites the system. In the worst case scenario, the excitation frequency coincides with the natural frequency of the machine causing resonance. Rotating machines are a machine type, where the excitation arises from the machine itself. The excitation originates from the mass imbalance in the rotating shaft, which always exists in machines that are manufactured using conventional methods. The excitation has a frequency that is dependent on the rotational speed of the machine. The rotating machines in industrial use are usually designed to rotate at a constant rotational speed, the case where the resonances can be easily avoided. However, the machines that have a varying operational speed are more problematic due to a wider range of frequencies that have to be avoided. Vibrations, which frequencies equal to rotational speed frequency of the machine are widely studied and considered in the typical machine design process. This study concentrates on vibrations, which arise from the excitations having frequencies that are multiples of the rotational speed frequency. These vibrations take place when there are two or more excitation components in a revolution of a rotating shaft. The dissertation introduces four studies where three kinds of machines are experiencing vibrations caused by different excitations. The first studied case is a directly driven permanent magnet generator used in a wind power plant. The electromagnetic properties of the generator cause harmonic excitations in the system. The dynamic responses of the generator are studied using the multibody dynamics formulation. In another study, the finite element method is used to study the vibrations of a magnetic gear due to excitations, which frequencies equal to the rotational speed frequency. The objective is to study the effects of manufacturing and assembling inaccuracies. Particularly, the eccentricity of the rotating part with respect to non-rotating part is studied since the eccentric operation causes a force component in the direction of the shortest air gap. The third machine type is a tube roll of a paper machine, which is studied while the tube roll is supported using two different structures. These cases are studied using different formulations. In the first case, the tube roll is supported by spherical roller bearings, which have some wavinesses on the rolling surfaces. Wavinesses cause excitations to the tube roll, which starts to resonate at the frequency that is a half of the first natural frequency. The frequency is in the range where the machine normally operates. The tube roll is modeled using the finite element method and the bearings are modeled as nonlinear forces between the tube roll and the pedestals. In the second case studied, the tube roll is supported by freely rotating discs, which wavinesses are also measured. The above described phenomenon is captured as well in this case, but the simulation methodology is based on the flexible multibody dynamics formulation. The simulation models that are used in both of the last two cases studied are verified by measuring the actual devices and comparing the simulated and measured results. The results show good agreement.

Co-operative acquisitions – the contextual factors and challenges for co-operatives when acquiring an investorowned firm

Mergers and acquisitions (M&As) have been seen as an important strategy in helping organizations to grow, gain access to new markets and resources, increase efficiency, and enable competitiveness in order to fulfil the purpose of the organization. These aspects have made M&As of central interest to academic literature. In co-operative studies mergers especially have been widely studied. The common focus of these studies is that M&As have taken place between organizations of the same form. It is noteworthy that there is a scarcity of literature concerning acquisitions between different organizational types. Moreover, M&As have not been evaluated concerning the organization’s ownership and purpose, which may be significant integration factors. The overall objective of this study is to describe and understand why co-operative organizations use acquisition as a strategic alternative. In more detail – and in order to develop understanding of the background ideals affecting the acquisition decision and the differences of organization ideals in the integration process – this study is based on a qualitative case study approach. By combining interview data gathered from the OPPohjola Group and associating the observations from various streams of research on acquisitions and management with the purpose of co-operation, and examining these issues further, the thesis contributes to the elaboration of theory in the field of the strategic management of co-operatives. The dissertation consists of two parts. The first part introduces the research topic, methods and publications, as well as discussing the overall outcomes. The second part consists of four publications that address the research questions from different viewpoints. The analyses of this dissertation indicate that, from the strategic point of view, the acquisition of an investor-owned firm by a co-operative organization may create competitive advantage for the co-operative. On the other hand, there are differences in and following from the purpose of acquirer and the acquiree that may, in such case, pose several challenges to the integration process.

Juridisen kaksinkertaisen verotuksen problematiikka kansainvälisessä yritystoiminnassa

Tässä tutkielmassa tarkastellaan kansainvälisessä yritystoiminnassa esiintyviä juridisen kaksinkertaisen verotuksen ongelmatilanteita suomalaisten yritysten näkökulmasta. Tutkielmassa pohditaan lisäksi yritysten omaa roolia osana kaksinkertaisen verotuksen tilanteita. Juridista kaksinkertaista verotusta muodostuu, kun sama yhtiö maksaa samasta tulosta veroa kahteen valtioon. Teoriaosio etenee verotusoikeuden määrittämisestä kaksinkertaisen verotuksen muodostumiseen. Kaksinkertainen verotus pyritään poistamaan poistomenetelmällä, joka on Suomessa tavallisesti hyvitysmenetelmä. Ongelmatilanne muodostuu, kun kaksinkertaista verotusta ei saada tehokkaasti poistettua tulon lähdevaltion ja yhtiön asuinvaltion välillä. Tämä tutkielma on laadullinen tutkimus ja tutkimusmenetelmänä on käytetty teemahaastattelua. Tutkimustulokset osoittavat, että kvalifikaatiokonflikteissa juridisen kaksinkertaisen verotuksen ongelmatilanne esiintyy pääsääntöisesti rojalti-liiketulo -luokitteluristiriidan seurauksena. Kiinteän toimipaikan kvalifikaatio on harvinaisempi ongelmatilanne. Hyvitysmenetelmän suurimmat ongelmat esiintyvät puolestaan pääliikkeen tappiollisen liiketoiminnan johdosta. Toinen hyvitysmenetelmän ongelmakohta esiintyy, kun lähdeveron alainen tulo huomioidaan bruttotulosta, mutta ulkomaisen tulon hyvitys suoritetaan nettotulosta. Haastatteluiden perusteella on selvää, että yritysten oma rooli kaksinkertaisen verotuksen ehkäisyssä on merkittävä. Yrityksen omia vaikutusmahdollisuuksia ovat muun muassa riittävä ennakointikyky, dokumentointi, selkeät sopimukset ja asiantuntijuus.