Quantum Tomography with Phase Space Measurements

This thesis addresses the use of covariant phase space observables in quantum tomography. Necessary and sufficient conditions for the informational completeness of covariant phase space observables are proved, and some state reconstruction formulae are derived. Different measurement schemes for measuring phase space observables are considered. Special emphasis is given to the quantum optical eight-port homodyne detection scheme and, in particular, on the effect of non-unit detector efficiencies on the measured observable. It is shown that the informational completeness of the observable does not depend on the efficiencies. As a related problem, the possibility of reconstructing the position and momentum distributions from the marginal statistics of a phase space observable is considered. It is shown that informational completeness for the phase space observable is neither necessary nor sufficient for this procedure. Two methods for determining the distributions from the marginal statistics are presented. Finally, two alternative methods for determining the state are considered. Some of their shortcomings when compared to the phase space method are discussed.

Muukalainen aviovuoteessa : I married a monster for outer space (1958) ja invaasioelokuvan sukupuolittuneet todellisuudet

Teemanumero 1/2011 : Kauhut ja pelot.

Analysis and validation of space averaged drag model for numerical simulations of gas-solid flows in fluidized beds

This thesis presents an approach for formulating and validating a space averaged drag model for coarse mesh simulations of gas-solid flows in fluidized beds using the two-fluid model. Proper modeling for fluid dynamics is central in understanding any industrial multiphase flow. The gas-solid flows in fluidized beds are heterogeneous and usually simulated with the Eulerian description of phases. Such a description requires the usage of fine meshes and small time steps for the proper prediction of its hydrodynamics. Such constraint on the mesh and time step size results in a large number of control volumes and long computational times which are unaffordable for simulations of large scale fluidized beds. If proper closure models are not included, coarse mesh simulations for fluidized beds do not give reasonable results. The coarse mesh simulation fails to resolve the mesoscale structures and results in uniform solids concentration profiles. For a circulating fluidized bed riser, such predicted profiles result in a higher drag force between the gas and solid phase and also overestimated solids mass flux at the outlet. Thus, there is a need to formulate the closure correlations which can accurately predict the hydrodynamics using coarse meshes. This thesis uses the space averaging modeling approach in the formulation of closure models for coarse mesh simulations of the gas-solid flow in fluidized beds using Geldart group B particles. In the analysis of formulating the closure correlation for space averaged drag model, the main parameters for the modeling were found to be the averaging size, solid volume fraction, and distance from the wall. The closure model for the gas-solid drag force was formulated and validated for coarse mesh simulations of the riser, which showed the verification of this modeling approach. Coarse mesh simulations using the corrected drag model resulted in lowered values of solids mass flux. Such an approach is a promising tool in the formulation of appropriate closure models which can be used in coarse mesh simulations of large scale fluidized beds.

Reflexive Space. A Constructionist Model of the Russian Reflexive Marker

This study examines the structure of the Russian Reflexive Marker ( ся/-сь) and offers a usage-based model building on Construction Grammar and a probabilistic view of linguistic structure. Traditionally, reflexive verbs are accounted for relative to non-reflexive verbs. These accounts assume that linguistic structures emerge as pairs. Furthermore, these accounts assume directionality where the semantics and structure of a reflexive verb can be derived from the non-reflexive verb. However, this directionality does not necessarily hold diachronically. Additionally, the semantics and the patterns associated with a particular reflexive verb are not always shared with the non-reflexive verb. Thus, a model is proposed that can accommodate the traditional pairs as well as for the possible deviations without postulating different systems. A random sample of 2000 instances marked with the Reflexive Marker was extracted from the Russian National Corpus and the sample used in this study contains 819 unique reflexive verbs. This study moves away from the traditional pair account and introduces the concept of Neighbor Verb. A neighbor verb exists for a reflexive verb if they share the same phonological form excluding the Reflexive Marker. It is claimed here that the Reflexive Marker constitutes a system in Russian and the relation between the reflexive and neighbor verbs constitutes a cross-paradigmatic relation. Furthermore, the relation between the reflexive and the neighbor verb is argued to be of symbolic connectivity rather than directionality. Effectively, the relation holding between particular instantiations can vary. The theoretical basis of the present study builds on this assumption. Several new variables are examined in order to systematically model variability of this symbolic connectivity, specifically the degree and strength of connectivity between items. In usage-based models, the lexicon does not constitute an unstructured list of items. Instead, items are assumed to be interconnected in a network. This interconnectedness is defined as Neighborhood in this study. Additionally, each verb carves its own niche within the Neighborhood and this interconnectedness is modeled through rhyme verbs constituting the degree of connectivity of a particular verb in the lexicon. The second component of the degree of connectivity concerns the status of a particular verb relative to its rhyme verbs. The connectivity within the neighborhood of a particular verb varies and this variability is quantified by using the Levenshtein distance. The second property of the lexical network is the strength of connectivity between items. Frequency of use has been one of the primary variables in functional linguistics used to probe this. In addition, a new variable called Constructional Entropy is introduced in this study building on information theory. It is a quantification of the amount of information carried by a particular reflexive verb in one or more argument constructions. The results of the lexical connectivity indicate that the reflexive verbs have statistically greater neighborhood distances than the neighbor verbs. This distributional property can be used to motivate the traditional observation that the reflexive verbs tend to have idiosyncratic properties. A set of argument constructions, generalizations over usage patterns, are proposed for the reflexive verbs in this study. In addition to the variables associated with the lexical connectivity, a number of variables proposed in the literature are explored and used as predictors in the model. The second part of this study introduces the use of a machine learning algorithm called Random Forests. The performance of the model indicates that it is capable, up to a degree, of disambiguating the proposed argument construction types of the Russian Reflexive Marker. Additionally, a global ranking of the predictors used in the model is offered. Finally, most construction grammars assume that argument construction form a network structure. A new method is proposed that establishes generalization over the argument constructions referred to as Linking Construction. In sum, this study explores the structural properties of the Russian Reflexive Marker and a new model is set forth that can accommodate both the traditional pairs and potential deviations from it in a principled manner.

Tunable lumped-element bandpass filters for Cognitive Radio application

In this thesis the design of bandpass filters tunable at 400 MHz – 800 MHz was under research. Microwave filters are vital components which provide frequency selectivity in wide variety of electronic systems operating at high frequencies. Due to the occurrence of multi-frequency bands communication and diverse applications of wireless devices, requirement of tunable filters exists. The one of potential implementation of frequency-agile filters is frontends and spectrum sensors in Cognitive Radio (CR). The principle of CR is to detect and operate at a particular available spectrum without interfering with the primary user’s signals. This new method allows improving the efficiency of utilizing allocated spectrum such as TV band (400 MHz – 800 MHz). The focus of this work is development of sufficiently compact, low cost tunable filters with quite narrow bandwidth using currently available lumped-element components and PCB board technology. Filter design, different topologies and methods of tuning of bandpass filters are considered in this work. As a result, three types of topologies of bandpass filter were simulated and realised. They use digitally tunable capacitors (DTCs) for adjusting central frequency at TV "white space" spectrum. Measurements revealed that schematics presented in this work have proper output response and filters are successfully tuned by DTCs.

Plan B from Outer Space - InsomniaGame-pelin suunnittelu ja toteutus 2010–2011

InsomniaGame oli Turun yliopiston digitaalisen kulttuurin oppiaineen ja Insomnia verkkopeliyhdistyksen yhteistyössä vuosina 2010 ja 2011 toteuttama pelikonseptikokeilu. InsomniaGame oli osa laajempaa ”CoEx: Yhteisöllistä tekemistä tukevat tilat kokemusten jakamisessa” kaksivuotista (1.10.2009–31.12.2011) hanketta, jonka toteuttivat yhteistyössä Turun yliopiston Porin yksikkö, Tampereen teknillisen yliopiston Porin yksikkö ja Tampereen yliopisto. Hankkeen tavoitteena oli toteuttaa sosiaalista mediaa, yhteisöllisyyttä ja lisättyä todellisuutta hyödyntäviä virtuaalisia ja julkisia tiloja, joissa käyttäjät voivat jakaa kokemuksia. Tutkimus on luonteeltaan soveltava pro gradu -tutkielma, joka sisältää kaksi vuotta kestäneen ja kaksi pelisovellusta sisältävän työosuuden. InsomniaGame koostui erilaisista pelaajien suorittamista tehtävistä, pelialustasta sekä taustatarinasta. Päätutkimuskysymykset ovat: Mitkä tekijät vaikuttivat pelisuunnitteluprosessiin ja miten? Työ esittelee InsomniaGame-pelin kehityksen. Erityistarkastelussa ovat suunnitteluprosessin ja pelin sisällölliset muutokset sekä niihin vaikuttaneet tekijät. Pelin kehitys perustui pääasiassa erilaisiin dokumentteihin, joita käytettiin suunnittelun apuvälineenä sekä viestinnässä projektin eri toimijoiden kesken. Tutkimus pyrkii syntyneiden dokumenttien sekä pelisuunnittelijoiden muistin perusteella rekonstruoimaan InsomniaGame-pelisovelluksen kehityskaaren. InsomniaGamen kehityksessä oli monia tekijöitä, jotka muuttuivat sen kehityskaaren aikana. Itse pelin sisältö, kuten myös suunnittelutapa, muuttuivat kahden vuoden aikana huomattavasti. Pelillä oli myös monia erityispiirteitä, jotka tekevät sen kehityksestä ainutlaatuisen, sillä esimerkiksi pelin testaaminen yhtenä kokonaisuutena oli mahdotonta. Lisäksi peli oli tutkimus- ja yhteistyöprojekti, jossa oli mukana monia eri toimijoita ja erityisesti tutkimuksessa korostuu yhteistyökumppani Insomnia verkkopeliyhdistyksen osallisuus. InsomniaGamen kummankaan vuoden toteutus ei sujunut odotetulla tavalla, mikä osaltaan vaikutti etenkin jälkimmäisen vuoden pelin suunnitteluun. Varsinainen suunnittelutyö kuitenkin eteni ensimmäisenä vuonna käytetyn mallin mukaisesti, mutta kuitenkin niin että alkuperäiset oletukset pelisuunnittelusta ja lopputuloksesta muuttuivat. Tämän vuoksi peliprojektia voi paikoitellen luonnehtia jopa kaoottiseksi, ja erityisesti toteutusvaiheessa jouduttiin luomaan nopealla aikataululla uusia toimintamalleja. Työ toimii mallina tuleville peliprojekteille, mutta erityisen tärkeää olisi luoda yhtenäinen kehitysalusta vastaavanlaisia projekteja varten.

Russia, China, India Foresight for Small and Medium size Enterprises in Uusimaa : Changes forecast in the Russian, Chinese and Indian operating environments from the viewpoint of small and middle-sized enterprises in Uusimaa

The report describes those factors of the future that are related to the growth and needs of Russia, China, and India and that may provide significant internationalisation potential for Uusimaa companies. The report examines the emerging trends and market-entry challenges for each country separately. Additionally, it evaluates the training needs of Uusimaa companies in terms of the current offerings available for education on topics related to Russia, China, and India. The report was created via the Delphi method: experts were interviewed, and both Trendwiki material and the latest literature were used to create a summary of experts’ views, statements, and reasons behind recent developments. This summary of views was sent back to the experts with the objective of reaching consensus synthesising the differing views or, at least, of providing argumentation for the various alternative lines of development. In addition to a number of outside experts and business leaders, all heads of Finpro’s Finland Trade Centers participated in the initial interviews. The summary was commented upon by all Finpro consultants and analysts for Russia, China, and India, with each focusing on his or her own area of expertise. The literature used consisted of reports, listed for each country, and an extensive selection of the most recent newspaper articles. The report was created in January-April 2010. On 22 April 2010 its results were reviewed at the final report presentation in cooperation with the Uusimaa ELY Centre.

Design Space Exploration for MPSoC Architectures

Multiprocessor system-on-chip (MPSoC) designs utilize the available technology and communication architectures to meet the requirements of the upcoming applications. In MPSoC, the communication platform is both the key enabler, as well as the key differentiator for realizing efficient MPSoCs. It provides product differentiation to meet a diverse, multi-dimensional set of design constraints, including performance, power, energy, reconfigurability, scalability, cost, reliability and time-to-market. The communication resources of a single interconnection platform cannot be fully utilized by all kind of applications, such as the availability of higher communication bandwidth for computation but not data intensive applications is often unfeasible in the practical implementation. This thesis aims to perform the architecture-level design space exploration towards efficient and scalable resource utilization for MPSoC communication architecture. In order to meet the performance requirements within the design constraints, careful selection of MPSoC communication platform, resource aware partitioning and mapping of the application play important role. To enhance the utilization of communication resources, variety of techniques such as resource sharing, multicast to avoid re-transmission of identical data, and adaptive routing can be used. For implementation, these techniques should be customized according to the platform architecture. To address the resource utilization of MPSoC communication platforms, variety of architectures with different design parameters and performance levels, namely Segmented bus (SegBus), Network-on-Chip (NoC) and Three-Dimensional NoC (3D-NoC), are selected. Average packet latency and power consumption are the evaluation parameters for the proposed techniques. In conventional computing architectures, fault on a component makes the connected fault-free components inoperative. Resource sharing approach can utilize the fault-free components to retain the system performance by reducing the impact of faults. Design space exploration also guides to narrow down the selection of MPSoC architecture, which can meet the performance requirements with design constraints.

Cultural distance and negotiation behavior : Perception of entrepreneurs operating in Turku

This thesis investigates the influence of cultural distance on entrepreneurs’ negotiation behaviour. For this purpose, Turku was chosen as the unit of analysis due to the exponential demographic change experienced during the last two decades that has derived in a more diversified local environment. The research aim set for this study was to identify to what extent entrepreneurs face cultural distance, how cultural distance influences the entrepreneur’s negotiation behaviour and how can it be addressed in order to turn dissimilarities into opportunities. This study presented the relation and apparent dichotomy of cultural distance and global culture, including the component of diversity. The impact of cultural distance in the entrepreneurial mindset and its consequent effect in negotiation behaviour was presented too. Addressing questions about the way individuals perceive, behave and interact allowed the use of interviews for this qualitative research study. In the empirical part of this study it was found that negotiation behaviour differed in terms of how congenial entrepreneurs felt when managing cultural distance, encompassing their performance. It was also acknowledged that after time and effort, some of the personal traits were enhanced while others reduced, allowing for more flexibility and adaptation. Furthermore, depending on the level of trust and shared interests, entrepreneurs determined their attitudinal approach, being adaptive or reactive subject to situational aspects. Additionally, it was found that the acquisition of cultural savvy not necessarily conveyed to more creativity. This experiential learning capability led to the proposition of new ways of behaviour. Likewise, it was proposed that growing cultural intelligence bridge distances, reducing mistrusts and misunderstandings. The capability of building more collaborative relationships allows entrepreneurs to see cultural distance as a cultural perspective instead of as a threat. Therefore it was recommended to focus on proximity rather than distance to better identify and exploit untapped opportunities and better perform when negotiating in whichever cultural conditions.

The logistic risks of Finnish companies operating in China

Selvitys suomalaisten yritysten kohtaamista logistisista ongelmista Kiinan markkinoilla toimiessa. Tutkielma tuo esiin Kiinan logistiikkaan liittyvät erityispiirteet ja heijastaa niitä haastattelujen avulla suomalaisiin yrityksiin, jotka operoivat Kiinassa.

Wind Turbine Direct-Drive Permanent-Magnet Generator with Direct Liquid Cooling for Mass Reduction

Today’s electrical machine technology allows increasing the wind turbine output power by an order of magnitude from the technology that existed only ten years ago. However, it is sometimes argued that high-power direct-drive wind turbine generators will prove to be of limited practical importance because of their relatively large size and weight. The limited space for the generator in a wind turbine application together with the growing use of wind energy pose a challenge for the design engineers who are trying to increase torque without making the generator larger. When it comes to high torque density, the limiting factor in every electrical machine is heat, and if the electrical machine parts exceed their maximum allowable continuous operating temperature, even for a short time, they can suffer permanent damage. Therefore, highly efficient thermal design or cooling methods is needed. One of the promising solutions to enhance heat transfer performances of high-power, low-speed electrical machines is the direct cooling of the windings. This doctoral dissertation proposes a rotor-surface-magnet synchronous generator with a fractional slot nonoverlapping stator winding made of hollow conductors, through which liquid coolant can be passed directly during the application of current in order to increase the convective heat transfer capabilities and reduce the generator mass. This doctoral dissertation focuses on the electromagnetic design of a liquid-cooled direct-drive permanent-magnet synchronous generator (LC DD-PMSG) for a directdrive wind turbine application. The analytical calculation of the magnetic field distribution is carried out with the ambition of fast and accurate predicting of the main dimensions of the machine and especially the thickness of the permanent magnets; the generator electromagnetic parameters as well as the design optimization. The focus is on the generator design with a fractional slot non-overlapping winding placed into open stator slots. This is an a priori selection to guarantee easy manufacturing of the LC winding. A thermal analysis of the LC DD-PMSG based on a lumped parameter thermal model takes place with the ambition of evaluating the generator thermal performance. The thermal model was adapted to take into account the uneven copper loss distribution resulting from the skin effect as well as the effect of temperature on the copper winding resistance and the thermophysical properties of the coolant. The developed lumpedparameter thermal model and the analytical calculation of the magnetic field distribution can both be integrated with the presented algorithm to optimize an LC DD-PMSG design. Based on an instrumented small prototype with liquid-cooled tooth-coils, the following targets have been achieved: experimental determination of the performance of the direct liquid cooling of the stator winding and validating the temperatures predicted by an analytical thermal model; proving the feasibility of manufacturing the liquid-cooled tooth-coil winding; moreover, demonstration of the objectives of the project to potential customers.

Kolmen hyvinvointiaseman toimintakustannusten määritys Etelä-Karjalassa

Työn tavoitteena oli tutkia, millä tavalla perusterveydenhuollon perinteisestä terveysasemamallista hyvinvointiasemamalliin siirtyminen vaikuttaa sosiaali- ja terveyspalvelujen tarjonnan kustannuksiin, mikäli vaikutus on havaittavissa. Toisaalta tavoitteena oli kartoittaa, millä keinoilla hyvinvointiasemien kustannustehokkuutta voitaisiin parantaa tulevaisuudessa ja mitä kustannushyötyjä tiiviimmällä sosiaali- ja terveystoimen yhteistyöllä on mahdollista saavuttaa. Tutkimuksessa käsiteltiin terveyden ja hyvinvoinnin edistämisen roolin merkitystä perusterveydenhuollossa, sähköistä asiointipalveluja ja terveydenhuollon ammattiryhmien välistä työnjakoa sekä edelleen, miten näillä voidaan vaikuttaa tuottavuuteen ja vaikuttavuuteen. Havaittiin, että sähköisellä asioinnilla ja työnjaolla on selkeä yhteys kustannuksiin. Työn empiirisessä osassa tarkasteltiin kolmea hyvinvointiasemamallin pilottihankkeessa mukana olevaa asemaa Lauritsalassa, Lemillä ja Ruokolahdella. Kustannusten tarkastelu keskittyi henkilöstö- ja tilakustannuksiin. Tutkittiin myös, miten sähköinen asiointi ja Eksoten alueen puhelinpalvelujen keskittäminen vaikuttaa edellä mainittuihin kustannuseriin. Tutkimuksen tuloksina havaittiin, että hyvinvointiasemamallin pilotointi ei ole tutkittavilla asemilla merkittävästi vaikuttanut kustannuksiin henkilöstön osalta; tilakustannukset olivat pienentyneet Lemillä ja Ruokolahdella. Laskelmien perusteella muodostettujen tavoitteiden mukaisesti on hyvinvointiasemilla kuitenkin pyrittävä vähintään noin 14 % tai enintään 32 % säästöön henkilöstö- ja tilakustannuksissa pilottivaiheen kustannuksiin verrattuna. Tulevaisuudessa olennaiseksi kustannusten hallinnan edellytykseksi havaittiin työnjaon muuttaminen hoitajavetoisemmaksi ja sähköisten asiointipalvelujen lisääntyvä tarjonta. Sähköisten asioinnin lisääntyvällä käytöllä on mahdollista vähentää hoitohenkilöstön tarvetta kokonaisuudessaan. Sekä sähköisen asioinnin käytön lisäämisellä että puhelinpalvelujen keskittämisellä tulevaisuudessa havaittiin olevan huomattava vaikutus henkilöstöresurssien käyttöön ja edelleen kustannustehokkuuteen.

The impact of long-term brand development strategies on brand value of companies operating in high-technology markets

The objective of the current research is to investigate brand value generation. The study is conducted in the context of high-technology companies. The research aims at finding the impact of long-term brand development strategies, including advertising investments, R&D investments, R&D intensity, new products developed and design. The empirical part of the study incorporated collection of primary and secondary data on 36 companies operating in high-technology sector and being rated as top companies with the most valuable brands by Interbrand consultancy. The data contained information for six consequent years from 2008 to 2013. Obtained data was analyzed using the methods of fixed effect and random effect model (panel data analysis). The analysis showed positive effect of advertising and R&D investments on brand value of high-technology companies in the long run. The impact of remaining three strategies was not approved and further investigation is required.

The European Union and Assembling Biofuel Development – topological investigations concerning the associations between law, policy and space

Biofuels for transport are a renewable source of energy that were once heralded as a solution to multiple problems associated with poor urban air quality, the overproduction of agricultural commodities, the energy security of the European Union (EU) and climate change. It was only after the Union had implemented an incentivizing framework of legal and political instruments for the production, trade and consumption of biofuels that the problems of weakening food security, environmental degradation and increasing greenhouse gases through land-use changes began to unfold. In other words, the difference between political aims for why biofuels are promoted and their consequences has grown – which is also recognized by the EU policy-makers. Therefore, the global networks of producing, trading and consuming biofuels may face a complete restructure if the European Commission accomplishes its pursuit to sideline crop-based biofuels after 2020. My aim with this dissertation is not only to trace the manifold evolutions of the instruments used by the Union to govern biofuels but also to reveal how this evolution has influenced the dynamics of biofuel development. Therefore, I study the ways the EU’s legal and political instruments of steering biofuels are coconstitutive with the globalized spaces of biofuel development. My analytical strategy can be outlined through three concepts. I use the term ‘assemblage’ to approach the operations of the loose entity of actors and non-human elements that are the constituents of multi-scalar and -sectorial biofuel development. ‘Topology’ refers to the spatiality of this European biofuel assemblage and its parts whose evolving relations are treated as the active constituents of space, instead of simply being located in space. I apply the concept of ‘nomosphere’ to characterize the framework of policies, laws and other instruments that the EU applies and construes while attempting to govern biofuels. Even though both the materials and methods vary in the independent articles, these three concepts characterize my analytical strategy that allows me to study law, policy and space associated with each other. The results of my examinations underscore the importance of the instruments of governance of the EU constituting and stabilizing the spaces of producing and, on the other hand, how topological ruptures in biofuel development have enforced the need to reform policies. This analysis maps the vast scope of actors that are influenced by the mechanism of EU biofuel governance and, what is more, shows how they are actively engaging in the Union’s institutional policy formulation. By examining the consequences of fast biofuel development that are spatially dislocated from the established spaces of producing, trading and consuming biofuels such as indirect land use changes, I unfold the processes not tackled by the instruments of the EU. Indeed, it is these spatially dislocated processes that have pushed the Commission construing a new type of governing biofuels: transferring the instruments of climate change mitigation to land-use policies. Although efficient in mitigating these dislocated consequences, these instruments have also created peculiar ontological scaffolding for governing biofuels. According to this mode of governance, the spatiality of biofuel development appears to be already determined and the agency that could dampen the negative consequences originating from land-use practices is treated as irrelevant.

The duality of tactical thought : a study of how Swedish land forces' commanders view tactics in irregular warfare

This is a sociological study of the views of officers in the Swedish Army and its Amphibious Forces on tactics in Irregular Warfare (IW), in particular, Counterinsurgency (COIN). IW comprises struggles, where the military weaker part uses an indirect approach with smaller units and integrates the civilian and military dimensions in a violence spectrum including subversion, terrorism, Guerrilla Warfare and infantry actions. IW is the main armed warfare style in insurgencies. COIN is the combined political, military, economic, social and legal actions in counter insurgencies. Data has been collected by means of interviews with almost all (n =43) officers, who were either commanding battalions or rifle and manoeuvre companies while undergoing training for general warfare and international operations. The main theoretical and methodological inspiration is the traditional one for research on social fields, inaugurated by the French sociologist Pierre Bourdieu. The statistical technique used is Multiple Correspondence Analysis. As a background and context base, an inquiry inspired by the Begriffsgechichte (Conceptual History) tradition explores the genesis and development of understandings of the term Irregular Warfare. The research question is outlined as; “how can contemporary Swedish military thought on tactics in Irregular Warfare be characterized using descriptive patterns, mapped in relation to background factors and normative standards? The most significant findings are that there are two main opposing notions separating the officers’ views on tactics in Irregular Warfare: (1) a focus on larger, combat oriented and collectively operating military units versus smaller and larger, more intelligence oriented and dispersed operating units, and (2) a focus on military tasks and kinetic effects versus military and civilian tasks as well as “soft” effects. The distribution of these views can be presented as a two-dimensional space structured by the two axes. This space represents four categories of tactics, partly diverging from normative military standards for Counterinsurgency. This social space of standpoints shows different structural tendencies for background factors of social and cultural character, particularly dominant concerning military backgrounds, international mission experiences and civilian education. Compared to military standards for Counterinsurgency, the two tactical types characterized by a Regular Warfare mind-set stands out as counter-normative. Signs of creative thought on military practice and theory, as well as a still persistent Regular Warfare doxa are apparent. Power struggles might thus develop, effecting the transformation to a broadened warfare culture with an enhanced focus also on Irregular Warfare. The result does not support research results arguing for a convergence of military thought in the European transformation of Armed Forces. The main argument goes beyond tactics and suggests sociological analysis on reciprocal effects regarding strategy, operational art, tactics as well as leadership, concerning the mind-set and preferences for Regular, Irregular and Hybrid Warfare.