Trigger and data link system for CMS Resistive Plate Chambers at the LHC accelerator

The purpose of the work was to realize a high-speed digital data transfer system for RPC muon chambers in the CMS experiment on CERN’s new LHC accelerator. This large scale system took many years and many stages of prototyping to develop, and required the participation of tens of people. The system interfaces to Frontend Boards (FEB) at the 200,000-channel detector and to the trigger and readout electronics in the control room of the experiment. The distance between these two is about 80 metres and the speed required for the optic links was pushing the limits of available technology when the project was started. Here, as in many other aspects of the design, it was assumed that the features of readily available commercial components would develop in the course of the design work, just as they did. By choosing a high speed it was possible to multiplex the data from some the chambers into the same fibres to reduce the number of links needed. Further reduction was achieved by employing zero suppression and data compression, and a total of only 660 optical links were needed. Another requirement, which conflicted somewhat with choosing the components a late as possible was that the design needed to be radiation tolerant to an ionizing dose of 100 Gy and to a have a moderate tolerance to Single Event Effects (SEEs). This required some radiation test campaigns, and eventually led to ASICs being chosen for some of the critical parts. The system was made to be as reconfigurable as possible. The reconfiguration needs to be done from a distance as the electronics is not accessible except for some short and rare service breaks once the accelerator starts running. Therefore reconfigurable logic is extensively used, and the firmware development for the FPGAs constituted a sizable part of the work. Some special techniques needed to be used there too, to achieve the required radiation tolerance. The system has been demonstrated to work in several laboratory and beam tests, and now we are waiting to see it in action when the LHC will start running in the autumn 2008.

Social Networking on Mobile Environment on top of PeerHood

Social networking and social networking sites have gained popularity among internet users during the past few years. Social networks fulfill the need of users to stay connected to friends and other people interested in the same issues. Combining social networks to the mobile environment is a growing interest of mobile device users as it allows the users to be in their online social community despite their mobility. This thesis highlights the basics of mobile environment, social networking and PeerHood and introduces a new approach of social networking on mobile environment, which is a new concept in mobile social networking. This approach is based on dynamic group discovery in accordance to some common user interests and management in the PeerHood environment. A reference implementation of a social networking application built on top of PeerHood is presented and it is tested and analyzed to understand the social networking on mobile environment and the new concept of dynamic group discovery in it.

Offering planning process development: Bridging the Offering Gaps and Consolidating Top Priority Needs in Product Offering

The aim of this Thesis is to study how to manage the front-end of the offering planning process. This includes actual process development and methods to gather and analyze information to achieve the best outcome in customer oriented product offering. Study is carried out in two parts: theoretical part and company related part. Theoretical framework is created introducing different types of approaches to manage product planning processes. Products are seen as platforms and they are broken down to subsystems to show different parts of the development. With the help of the matrix-based approaches product platform related information is gathered and analyzed. In this kind of analysis business/market drivers and cus-tomer/competitor information are connected with product subsystems. This gives possibilities to study product gaps/needs and possible future ideas/scenarios in different customer segments. Company related part consists of offering planning process development in real company environment. Process formation includes documents and tools that guide planning from the information gathering to the prioritization and decision making.

Towards open access networks – prototyping with the Lappeenranta model

The provision of Internet access to large numbers has traditionally been under the control of operators, who have built closed access networks for connecting customers. As the access network (i.e. the last mile to the customer) is generally the most expensive part of the network because of the vast amount of cable required, many operators have been reluctant to build access networks in rural areas. There are problems also in urban areas, as incumbent operators may use various tactics to make it difficult for competitors to enter the market. Open access networking, where the goal is to connect multiple operators and other types of service providers to a shared network, changes the way in which networks are used. This change in network structure dismantles vertical integration in service provision and enables true competition as no service provider can prevent others fromcompeting in the open access network. This thesis describes the development from traditional closed access networks towards open access networking and analyses different types of open access solution. The thesis introduces a new open access network approach (The Lappeenranta Model) in greater detail. The Lappeenranta Model is compared to other types of open access networks. The thesis shows that end users and service providers see local open access and services as beneficial. In addition, the thesis discusses open access networking in a multidisciplinary fashion, focusing on the real-world challenges of open access networks.

Behavioral Responses in Mice Selectively Bred for High and Low Levels of Open-Field Thigmotaxis

In animal psychology, the open-field (OF) test is a traditional method for studying different aspects of rodent behavior, with thigmotaxis (i.e., wallseeking behavior) being one of the best validated OF parameters employed to measure emotionality. The main purpose of the present study was to investigate the selection response in mice selectively bred for high and low levels of OF thigmotaxis (the HOFT and LOFT lines, respectively). The mice (N = 2048) were selected for 23 generations, resulting in bidirectional phenotypic divergence between the two lines; that is, the HOFT mice were more thigmotactic (i.e., more emotional) than the LOFT mice across the different generations. The origin of the line difference in thigmotaxis was further investigated by using the crossfostering paradigm, with the results suggesting that the divergence between the two lines was primarily innate in origin and not influenced by differing maternal behavior. The stability of the selection trait was examined by testing the animals at different ages as well as in varying conditions. The results indicated that the line difference in thigmotaxis was not affected by age at the time of testing, and it also persisted in the different OF testing situations as well as during pregnancy and lactation. The examination of a possible coselection of other characteristics revealed that the more thigmotactic HOFT mice lived longer than the less thigmotactic LOFT mice. In addition, the HOFT mice tended to rear and explore less than the LOFT mice, supporting the general assumption that emotionality and exploration are inversely related. The two lines did not generally differ in ambulation and defecation, that is, in the traditional OF indexes of emotionality, conforming to the suggestion that emotionality is a multidimensional construct. The effects of sex on different OF parameters were also assessed, with the results suggesting that among the HOFT and LOFT lines, the female mice were more emotional than the male mice. The examination of the temporal changes in the HOFT and LOFT lines’ OF behavior revealed some contradictory findings that also partially conflicted with general assumptions. Although this study did not show prominent differences in maternal responsiveness between the HOFT and LOFT mothers, the results suggested that the line divergence in emotionality was more pronounced in the presence of a pup after parturition than during pregnancy. The present study clearly demonstrates that OF thigmotaxis is a strong characteristic for producing two diverging lines of mice. The difference in thigmotaxis between the selectively bred HOFT and LOFT mice seemed to be a stable and robust feature of these animals, and it appeared to stem from a genetic background.

Separation of Gas Bubbles from Circulation Waters and Pulp Suspensions in Open Channel Flow

The objective of this thesis was to study the removal of gases from paper mill circulation waters experimentally and to provide data for CFD modeling. Flow and bubble size measurements were carried out in a laboratory scale open gas separation channel. Particle Image Velocimetry (PIV) technique was used to measure the gas and liquid flow fields, while bubble size measurements were conducted using digital imaging technique with back light illumination. Samples of paper machine waters as well as a model solution were used for the experiments. The PIV results show that the gas bubbles near the feed position have the tendency to escape from the circulation channel at a faster rate than those bubbles which are further away from the feed position. This was due to an increased rate of bubble coalescence as a result of the relatively larger bubbles near the feed position. Moreover, a close similarity between the measured slip velocities of the paper mill waters and that of literature values was obtained. It was found that due to dilution of paper mill waters, the observed average bubble size was considerably large as compared to the average bubble sizes in real industrial pulp suspension and circulation waters. Among the studied solutions, the model solution has the highest average drag coefficient value due to its relatively high viscosity. The results were compared to a 2D steady sate CFD simulation model. A standard Euler-Euler k-ε turbulence model was used in the simulations. The channel free surface was modeled as a degassing boundary. From the drag models used in the simulations, the Grace drag model gave velocity fields closest to the experimental values. In general, the results obtained from experiments and CFD simulations are in good qualitative agreement.

Accessing Research Results in the Open Information Environment

Presentation at the "Tutkimus vapaaksi verkkoon!" seminar in Helsinki, January 25, 2011

UCL Discovery: raising the Open Access profile at the institution

Presentation at the "Tutkimus vapaaksi verkkoon!" seminar in Helsinki, January 25, 2011

Innovation and Internationalisation in Russian Companies: Challenges and Opportunities for Open Innovation and Cooperation

Increasing globalisation and intensified cross-border cooperation, together with significant technological breakthroughs, create a fascinating gap for the research of the relationship between internationalisation and innovation on national, regional and company levels in Russia. The intensified international trade between countries and regions benefited from favourable institutional conditions, and facilitated the technology transfer and the development of innovations on the national level. This study approaches the same question from the company perspective; if certain companies are more innovative than other domestic companies, will they start internationalisation more easily or get involved in cooperation with international stakeholders? When companies operate in international markets, how do they obtain knowledge? Moreover, would this new knowledge from the foreign market help then to increase innovativeness, competitiveness and develop operations in domestic/local and foreign markets? Considering the role of foreign direct investments (FDI), the research in hand tries to find out the role of companies with FDI on the other players on the home market. Do foreigners bring new technology, innovation to the country? Is there spillover effect observed and how local companies can benefit from them? This dissertation studies the internationalisation and innovation in Russian companies, both from the outward internationalisation and inward internationalisation perspectives. Russian companies developed quickly during the transition period, after the dissolution of the Soviet Union. The common background of these companies, the effects of the change of ownership, and some managerial difficulties make them more sensitive to competitions issues, and in this context, the opportunities brought by the developing innovations are seen in companies and on the governmental level.