Congenital upper limb defects in Finland 1993-2005

Background: Interest in limb defects has grown after the thalidomide tragedy in the 1960s. As a result, congenital malformation registries, monitoring changes in birthprevalence and defect patterns, have been established in several countries. However, there are only a few true population based studies on birth prevalence of upper limb defects. The burden of hospital care among these children, specifically in terms of the number of admissions and total time spent in hospital, is also unknown. Aims and Methods: This study is based on information gathered from the Finnish Register of Congenital malformations (FRM) and the Finnish Hospital Discharge Register (FHDR). A total of 417 children born between 1993 and 2005 with an upper limb defect were gathered from the FRM. The upper limb defects were classified using the International Federation of Societies for Surgery of the Hand -classification that enables comparison with previous and future studies. Birth and live birth prevalence, sex and side distribution, frequency of associated anomalies as well as the proportion of perinatal and infant deaths according to the different subtypes were calculated. The number of hospital admissions, days spent in hospital, number and type of surgical operations were collected from the FHDR. Special features of two subgroups, radial ray defects (RRD) and constriction band syndrome (CBS), were explored. Results: Upper limb defects were observed in 417 of 753 342 consecutive births and in 392 of 750 461 live births. Birth prevalence was 5.5 per 10 000 births and 5.2 per 10 000 live births. Multiple anomalies or a known syndrome was found in 250 cases (60%). Perinatal mortality was 139 per 1000 births and infant mortality 135 per 1000 live births (overall Finnish perinatal mortality <5 per 1000 births and infant mortality 3.7 per 1000 live births). Altogether, 138 infants had RRD and 120 (87%) of these had either a known syndrome or multiple major anomalies. The proportion of perinatal deaths in RRD group was 29% (40/138) and infant deaths 35% (43/123). Fifty-one children had CBS in upper limbs. Fifteen of these (29%) had other major anomalies associated with constriction rings. The number of hospital admissions per year of children with congenital upper limb defects was 11-fold and the time spent in hospital 13-fold as compared with the general paediatric population. Conclusions: Birth prevalence of congenital upper limb defects was 5.5 per 10 000 births and 5.2 per 10 000 live births. RRD was especially associated with other major anomalies and high mortality. Nearly one third of the children with CBS also had other major anomalies suggesting different aetiologies inside the group. The annual burden of hospital care of children with congenital upper limb defects was at least 11-fold as compared with the general paediatric population.

Computational studies of deformation in stainless steel rings due to torch heating

A support ring of AISI 304L stainless steel that holds vertical, parallel wires arranged in a circle forming a cylinder is studied. The wires are attached to the ring with heat-induced shrinkage. When the ring is heated with a torch the heat affected zone tries to expand while the adjacent cool structure obstructs the expansion causing upsetting. During cooling, the ring shrinks smaller than its original size clamping the wires. The most important requirement for the ring is that it should be as round as possible and the deformations should occur as overall shrinkage in the ring diameter. A three-dimensional nonlinear transient sequential thermo-structural Abaqus model is used together with a Fortran code that enters the heat flux to each affected element. The local and overall deformations in one ring inflicted by the heating are studied with a small amount of inspection on residual stresses. A variety of different cases are chosen to be studied with the model constructed to provide directional knowledge; torch flux with the means of speed, location of the wires, heating location and structural factors. The decrease of heating speed increases heat flux that rises the temperature increasing shrinkage. In a single progressive heating uneven distribution of shrinkage appears to the start/end region that can be partially fixed with using speeded heating’s to strengthen the heating of that region. Location of the wires affect greatly to the caused shrinkage unlike heating location. The ring structure affects also greatly to the shrinkage; smaller diameter, bigger ring height, thinner thickness and greater number of wires increase shrinkage.

Designing gamification for collaborative learning in group work

Computer Supported Collaborative Learning (CSCL) is a teaching and learning approach which is widely adopted. However there are still some problems can be found when CSCL takes place. Studies show that using game-like mechanics can increase motivation, engagement, as well as modelling behaviors of players. Gamification is a rapid growing trend by applying the same mechanics. It refers to use game design elements in non-game contexts. This thesis is about combining gamification concept and computer supported collaborative learning together in software engineering education field. And finally a gamified prototype system is designed.

Performance improvement in mediterranean operations using risk management analysis : Case study of Containerships Group Ltd

Emerging markets of Northern Africa and Turkey provide growth opportunities for logistics service companies in the middle of low growth environment of European Union. The purpose of this research is to explore and analyze the risk factors in container shipping industry and third party logistics (3PL) services. The research empirically examined the risk factors, which are related within the interaction between these two parties in emerging markets of Mediterranean area. The previous studies have provided a valuable insight into the operational risks faced by container shipping industries. However, most of these studies have focused on one or several operational risk factors from a single point of view, and no studies have inclusively examined the possible operational risks faced in the container shipping industry from dual perspective of 3PL provider and its customers. A questionnaire has been deployed to collect related data; and the impacts of the risks were then be assessed and ranked using the method of risk mapping. Respondents were located in Turkey, Algeria, Tunisia, and Libya. Research presents the most important risk factors identified, and compares them between 3PL provider and its customers. The research also provide some risk mitigation strategies for the key risk factors, and tried to figure out a common risk picture, which guides the managers in both sides to have a better decisions and as a result, improve the performance of the container shipping operations. Challenge during project execution time was that customers identified vast amount of more risks than what was the case with logistics service operator.

Saksan graniittimarkkinoiden analysointi: Case Ylamaa Group Oy

Tämän kandidaatintyön tavoitteena on analysoida Saksan graniittimarkkinoiden houkuttelevuutta suomalaisen yrityksen näkökulmasta. Ylamaa Group Oy on rakennus-, ympäristö- ja sisustuskiveä tuottava yritys, joka on jo toimittanut Saksan alueelle tuotteitaan, mutta toiminta on ollut siellä vielä varsin vähäistä. Saksaa markkina-alueena analysoidaan PESTEn, sekä talouden ja maan raken-nusalan tulevaisuudennäkymien avulla, kilpailuasetelmaa puolestaan Porterin viidellä voimalla. Lisäksi tutkitaan asiakkaan kokemia arvoja graniitin tapauksessa ja etsitään yhteyksiä niiden, ja case-yrityksen ydinosaamisten välillä. Näin osoitetaan, miten yritys voi luoda itselleen kilpailuetua. Työn tuloksena käy ilmi, että Saksan markkinoille kannattaa laajentua. Kuitenkin kilpailu Saksassa on kovaa Euroopan yhtenäisen talousalueen vuoksi. Ylamaa Groupin tuleekin ottaa tuotannossaan ja markkinoinnissaan huomioon erinäisiä seikkoja Saksan markkinoilla pärjätäkseen, kuten hinta-laatusuhteen ja ympäris-töystävällisyyden korostamista.

Factors of innovation creation within functional heterogeneous project teams Case study: ABB Group

The research topic of the work is: “Factors of innovation creation within functionally heterogeneous project teams”. The research question is “What are the factors of innovation creation within functionally heterogeneous project teams?” The subject of this research is to explore the teams of projects, aimed at creating innovations, and understand how innovation is generated through project team work within them in term of factors. In line with the purposes of this study, firstly, it was analyzed what factors of such teams’ work are affecting creating innovation positively and negatively on the base of chosen literature and a preliminary conceptional framework was formulated, and secondly, the research of the work of project teams in one of the divisions of ABB company has been done and other factors and interdependencies between them have been added to the conceptional framework. This final conceptional framework constitutes the essense of the work findings and can be used as a tool to analyze the innovation creation process in functionally heterogeneous project teams

NEGOTIATING IN FINNISH GROCERY RETAIL - Negotiation Narratives of S-group, Kesko and Lidl

In this research retail negotiations are explored through the question: What characteristics are distinctive to negotiating in Finnish grocery retail trade? To shed light on the research question I interviewed experienced retail negotiators and mapped out the most important characteristics of the retail negotiations. I described through examples the most prominent challenges negotiators face in their negotiations and elaborated what kind of tools the experienced negotiators use to overcome those challenges. The research results add up to a groundwork frame for retail negotiations with which further research can be more easily directed to any area of interest in the Finnish grocery retail negotiations. The framework can give ideas or frames for further research, or function as a general guideline of factors to consider when negotiating in Finnish retail field. The results were divided into 3 sections: Characteristics, Challenges and Tools. Different negotiation models help negotiators and researchers understand negotiation dynamics. This research adds to that pool by focusing on elements essential to consider specifically in the context of Finnish retail. Finland offered an exceptionally interesting setting to study negotiation, as grocery retail trade in Finland is highly centralized. Especially for those interested understanding a centralized setting such as Finland’s retail field, the framework presented in this research might provide a valuable spectrum of essential negotiation elements. Learning is a lifelong process, but that path can be evened by tuning in on what others have learned during their own endeavors in similar situations. Seasoned negotiators have many stories to tell about negotiating that can be drawn upon and by doing so, we can avoid having to spend time learning the same insights twice. This research drew on narrative, case-research and interviewing to find out how seasoned negotiators in the field of Finnish retail experienced negotiation, what challenges negotiations pose and what tools can be used to overcome them