Functional, Social and Emotional Values as Determinants of Environmentally Responsible Media Consumption

The primary purpose of this research is to develop an enhanced understanding of how consumption values influence environmentally responsible consumption of print and digital media. Theoretical elaboration considers the associations of functional, social and emotional consumption values, green consumer segmentation and media consumption. Additionally, the purpose is to identify consumer perceptions of print and digital media’s environmental responsibility. Empirical analysis was based on qualitative interviews with a sample of 20 Finnish consumers categorized in two segments: young adults and middle aged consumers. Primary data collection was conducted through individual, semi-structured interviews. To analyze the respondents’ approach on the topic, the interviews disclosed themes of media consumption, perceived environmental friendliness of media, norms of behavior and consumers’ general consumption patterns. The results implicate functional value dominated the consumption decision-making process both in a general level and in media consumption. In addition to functional value, environmental responsibility does provide consumers with both emotional and social values. Analysis on perceived environmental responsibility of media demonstrated consumers generally perceive digital media as an environmentally responsible alternative because it does not create physical paper waste. Nevertheless, the perceptions of environmental responsibility and media consumption patterns lacked a consistent connection. Though, both theory and empirical results indicated an average consumer lacks a comprehensive understanding of digital and print media’s life-cycle and hence their environmental advantages and disadvantages.

Cost Reduction of Permanent Magnet Synchronous Machines

Electrical machine drives are the most electrical energy-consuming systems worldwide. The largest proportion of drives is found in industrial applications. There are, however many other applications that are also based on the use of electrical machines, because they have a relatively high efficiency, a low noise level, and do not produce local pollution. Electrical machines can be classified into several categories. One of the most commonly used electrical machine types (especially in the industry) is induction motors, also known as asynchronous machines. They have a mature production process and a robust rotor construction. However, in the world pursuing higher energy efficiency with reasonable investments not every application receives the advantage of using this type of motor drives. The main drawback of induction motors is the fact that they need slipcaused and thus loss-generating current in the rotor, and additional stator current for magnetic field production along with the torque-producing current. This can reduce the electric motor drive efficiency, especially in low-speed, low-power applications. Often, when high torque density is required together with low losses, it is desirable to apply permanent magnet technology, because in this case there is no need to use current to produce the basic excitation of the machine. This promotes the effectiveness of copper use in the stator, and further, there is no rotor current in these machines. Again, if permanent magnets with a high remanent flux density are used, the air gap flux density can be higher than in conventional induction motors. These advantages have raised the popularity of PMSMs in some challenging applications, such as hybrid electric vehicles (HEV), wind turbines, and home appliances. Usually, a correctly designed PMSM has a higher efficiency and consequently lower losses than its induction machine counterparts. Therefore, the use of these electrical machines reduces the energy consumption of the whole system to some extent, which can provide good motivation to apply permanent magnet technology to electrical machines. However, the cost of high performance rare earth permanent magnets in these machines may not be affordable in many industrial applications, because the tight competition between the manufacturers dictates the rules of low-cost and highly robust solutions, where asynchronous machines seem to be more feasible at the moment. Two main electromagnetic components of an electrical machine are the stator and the rotor. In the case of a conventional radial flux PMSM, the stator contains magnetic circuit lamination and stator winding, and the rotor consists of rotor steel (laminated or solid) and permanent magnets. The lamination itself does not significantly influence the total cost of the machine, even though it can considerably increase the construction complexity, as it requires a special assembly arrangement. However, thin metal sheet processing methods are very effective and economically feasible. Therefore, the cost of the machine is mainly affected by the stator winding and the permanent magnets. The work proposed in this doctoral dissertation comprises a description and analysis of two approaches of PMSM cost reduction: one on the rotor side and the other on the stator side. The first approach on the rotor side includes the use of low-cost and abundant ferrite magnets together with a tooth-coil winding topology and an outer rotor construction. The second approach on the stator side exploits the use of a modular stator structure instead of a monolithic one. PMSMs with the proposed structures were thoroughly analysed by finite element method based tools (FEM). It was found out that by implementing the described principles, some favourable characteristics of the machine (mainly concerning the machine size) will inevitable be compromised. However, the main target of the proposed approaches is not to compete with conventional rare earth PMSMs, but to reduce the price at which they can be implemented in industrial applications, keeping their dimensions at the same level or lower than those of a typical electrical machine used in the industry at the moment. The measurement results of the prototypes show that the main performance characteristics of these machines are at an acceptable level. It is shown that with certain specific actions it is possible to achieve a desirable efficiency level of the machine with the proposed cost reduction methods.

Enhancement of ultrafiltration process by pretreatment in recovery of hemicelluloses from wood extracts

Hemicelluloses are potential raw material for several items produced in future wood-based biorefineries. One possible method for recovering hemicelluloses from wood extracts is ultrafiltration (UF). However, low filtration capacities and severe fouling restrict the use of tight UF membranes in the treatment of wood extracts. The lack of suitable commercial membranes creates a need for pretreatment which would decrease fouling and increase the filtration capacity. This thesis focuses on the evaluation of the possibility to improve the filtration capacity and decrease fouling with the pretreatment of wood extracts. Methods which remove harmful compounds and methods which degrade them are studied, as well as combinations of the methods. The tested pretreatments have an influence on both the concentration of different compounds and the molecular mass distribution of the compounds in the extract. This study revealed that in addition to which kind of compounds were removed, also the change in molecular size distribution affected the filtration capacity significantly. It was shown that the most harmful compounds for the filtration capacity of the hydrophobic 5 kDa membrane were the ones capable of permeating the membrane and fouling also the inner membrane structure. Naturally, the size of the most harmful compounds depends on the used UF membrane and is thus case-specific. However, in the choice of the pretreatment method, the focus should be on the removal of harmful compound sizes rather than merely on the total amount of removed foulants. The results proved that filtration capacity can be increased with both adsorptive and oxidative pretreatments even by hundreds of per cents. For instance, the use of XAD7 and XAD16 adsorbents increased the average flux in the UF of a birch extract from nearly zero to 107 kg/(m2h) and 175 kg/(m2h), respectively. In the treatment of a spruce extract, oxidation by pulsed corona discharge (PCD) increased the flux in UF from 46 kg/(m2h) to 158 kg/(m2h). Moreover, when a birch extract batch was treated with laccase enzyme, the flux in UF increased from 15 kg/(m2h) to 36 kg/(m2h). However, fouling was decreased only by adsorptive pretreatment while oxidative methods had a negligible or even negative impact on it. This demonstrates that filtration capacity and fouling are affected by different compounds and mechanisms. The results of this thesis show that filtration capacity can be improved and fouling decreased through appropriate pretreatment. However, the choice of the best possible pretreatment is case-specific and depends on the wood extract and the membrane used. Finding the best option requires information on the extract content and membrane characteristics as well as on the filtration performance of the membrane in the prevailing conditions and a multivariate approach. On the basis of this study, it can be roughly concluded that adsorptive pretreatment improves the filtration capacity and decreases fouling rather reliably, but it may lead to significant hemicellulose losses. Oxidation reduces the loss of valuable hemicelluloses and could improve the filtration capacity, but fouling challenges may remain. Combining oxidation with adsorptive pretreatment was not a solution for avoiding hemicellulose losses in the tested cases.

IoT Based Pain Management using Physiological Parameters

The continuous technology evaluation is benefiting our lives to a great extent. The evolution of Internet of things and deployment of wireless sensor networks is making it possible to have more connectivity between people and devices used extensively in our daily lives. Almost every discipline of daily life including health sector, transportation, agriculture etc. is benefiting from these technologies. There is a great potential of research and refinement of health sector as the current system is very often dependent on manual evaluations conducted by the clinicians. There is no automatic system for patient health monitoring and assessment which results to incomplete and less reliable heath information. Internet of things has a great potential to benefit health care applications by automated and remote assessment, monitoring and identification of diseases. Acute pain is the main cause of people visiting to hospitals. An automatic pain detection system based on internet of things with wireless devices can make the assessment and redemption significantly more efficient. The contribution of this research work is proposing pain assessment method based on physiological parameters. The physiological parameters chosen for this study are heart rate, electrocardiography, breathing rate and galvanic skin response. As a first step, the relation between these physiological parameters and acute pain experienced by the test persons is evaluated. The electrocardiography data collected from the test persons is analyzed to extract interbeat intervals. This evaluation clearly demonstrates specific patterns and trends in these parameters as a consequence of pain. This parametric behavior is then used to assess and identify the pain intensity by implementing machine learning algorithms. Support vector machines are used for classifying these parameters influenced by different pain intensities and classification results are achieved. The classification results with good accuracy rates between two and three levels of pain intensities shows clear indication of pain and the feasibility of this pain assessment method. An improved approach on the basis of this research work can be implemented by using both physiological parameters and electromyography data of facial muscles for classification.

Ketterän ohjelmistokehittämisen hyödyntäminen käyttöliittymäkehityksessä asiakkaiden todellisen tarpeen ymmärtämiseksi

Työn tavoitteena oli toimintatutkimuksen kautta tutkia ketterän ohjelmistokehityksen keinoin toteutetun käyttöliittymäkehityksen kykyä vastata asiakkaiden todellisiin tarpeisiin. Työssä haettiin tapaustutkimusyritykselle olemassa olevan työkalun uuden version käyttöliittymän toteutusvaihtoehtoja ja toteutettiin korkean tarkkuuden prototyyppejä näitä hyödyntäen. Ketterän ohjelmistokehityksen arvot ja periaatteet soveltuivat kehitysprosessissa käytettäviksi erinomaisesti. Iteratiivinen lähestymistapa kehitykseen ja läheinen yhteistyö tapaustutkimusyrityksen ja kandidaatintyöntekijän kanssa mahdollistivat yrityksen odotusten täyttämisen. Työkalun käyttöliittymä saatettiin tasolle, joka mahdollistaa jatkokehittämisen aloituksen. Kattavamman testauttamisen sisällyttäminen kehitysprosessiin olisi edesauttanut vielä paremman lopputuloksen saavuttamista.

Compulsory licensing of standard-essential patents and injunctive relief as abuse of dominant position in violation of Article 102 TFEU

When a dominant undertaking holding a standard-essential patent uses its exclusive right to the IP to seek injunctions against those wishing to produce either de jure or de facto standard compliant products, it creates a conflict between the exclusive right to the use of the IP on the one hand and the possible abuse of dominance due to the exclusionary conduct on the other. The aim of the thesis is to focus on the issues concerning abuse of dominance in violation of Article 102 TFEU when the holder of the standard-essential patent seeks an injunction against a would-be licensee. The thesis is mainly based on the most recent ECJ case law in Huawei and the Commission’s recent decisions in Samsung and Motorola. The case law in Europe prior to those decisions was mainly focused on the German case law from Orange Book Standard which provided IP holders great leverage due to the almost automatic granting of injunctions against infringers. The ECJ in Huawei set out the requirements for when a de jure standard-essential patent holder would not be violating Article 102 TFEU when seeking an injunction, requiring that negotiations in good faith must take place prior to the seeking of the injunction and that all offers must comply with FRAND terms, thus limiting the scope of case law derived from Orange Book Standard in Germany. The ECJ chose not to follow all of the reasoning the Commission had laid out in Samsung and Motorola which provided a more licensee-friendly approach on the matter, but rather chose a compromise between the IP holder friendly German case law and the Commission’s decisions. However, the ECJ did not disclose how FRAND terms themselves should be interpreted, but rather left it for the national courts to decide. Furthermore, the thesis strongly argues that Huawei did not change the fact that only vertically integrated IP holders who have made a FRAND declaration are subject to the terms laid out in Huawei, thus leaving non-practicing entities such as patent trolls and entities that have not made a FRAND declaration outside its scope. The resulting conclusion from the thesis is that while the ECJ in Huawei presented new exceptional circumstances for when an IP holder could be abusing its dominant position when it seeks an injunction, it still left many more questions answered, such as the meaning of FRAND and whether deception in giving a FRAND declaration is prohibited under Article 102 TFEU or not.