Effect of Mechanical and Geometric Mismatching on Fatigue and Damage of Welded Joints

The future of high technology welded constructions will be characterised by higher strength materials and improved weld quality with respect to fatigue resistance. The expected implementation of high quality high strength steel welds will require that more attention be given to the issues of crack initiation and mechanical mismatching. Experiments and finite element analyses were performed within the framework of continuum damage mechanics to investigate the effect of mismatching of welded joints on void nucleation and coalescence during monotonic loading. It was found that the damage of undermatched joints mainly occurred in the sandwich layer and the damageresistance of the joints decreases with the decrease of the sandwich layer width. The damage of over-matched joints mainly occurred in the base metal adjacent to the sandwich layer and the damage resistance of the joints increases with thedecrease of the sandwich layer width. The mechanisms of the initiation of the micro voids/cracks were found to be cracking of the inclusions or the embrittled second phase, and the debonding of the inclusions from the matrix. Experimental fatigue crack growth rate testing showed that the fatigue life of under-matched central crack panel specimens is longer than that of over-matched and even-matched specimens. Further investigation by the elastic-plastic finite element analysis indicated that fatigue crack closure, which originated from the inhomogeneousyielding adjacent to the crack tip, played an important role in the fatigue crack propagation. The applicability of the J integral concept to the mismatched specimens with crack extension under cyclic loading was assessed. The concept of fatigue class used by the International Institute of Welding was introduced in the parametric numerical analysis of several welded joints. The effect of weld geometry and load condition on fatigue strength of ferrite-pearlite steel joints was systematically evaluated based on linear elastic fracture mechanics. Joint types included lap joints, angle joints and butt joints. Various combinations of the tensile and bending loads were considered during the evaluation with the emphasis focused on the existence of both root and toe cracks. For a lap joint with asmall lack-of-penetration, a reasonably large weld leg and smaller flank angle were recommended for engineering practice in order to achieve higher fatigue strength. It was found that the fatigue strength of the angle joint depended strongly on the location and orientation of the preexisting crack-like welding defects, even if the joint was welded with full penetration. It is commonly believed that the double sided butt welds can have significantly higher fatigue strength than that of a single sided welds, but fatigue crack initiation and propagation can originate from the weld root if the welding procedure results in a partial penetration. It is clearly shown that the fatigue strength of the butt joint could be improved remarkably by ensuring full penetration. Nevertheless, increasing the fatigue strength of a butt joint by increasing the size of the weld is an uneconomical alternative.

The effect of information and communication technology on global paper consumption

The objective of this thesis is to find out how information and communication technology affects the global consumption of printing and writing papers. Another objective is to find out, whether there are differences between paper grades in these effects. The empirical analysis is conducted by linear regression analysis using three sets of country-level panel data from 1990-2006. Data set of newsprint contains 95 countries, data set of uncoated woodfree paper 61 countries and data set of coated mechanical paper 42 countries. The material is based on paper consumption data of RISI’s Industry Statistics Database and on the information and communication technology data of GMID-database. Results indicate that number of Internet users has statistically significant negative effect on the consumption of newsprint and on the consumption of coated mechanical paper and number of mobile telephone users has positive effect on the consumptions of these papers. Results also indicate that information and communication technologies have only small effect on consumption of uncoated woodfree paper or no significant effect at all, but these results are more uncertain to some extent.

Influence of Equipment Operation and Performance Deterioration on Power Plant Economy.

Pysyäkseen kilpailukykyisenä vapautuneilla sähkömarkkinoilla on voimalaitoksen energiantuotantokustannusten oltava mahdollisimman matalia, tinkimättä kuitenkaan korkeasta käytettävyydestä. Polttoaineen energiasisällön mahdollisimman hyvä hyödyntäminen on ratkaisevan tärkeää voimalaitoksen kannattavuudelle. Polttoainekustannusten osuus on konvektiivisilla laitoksilla yleensä yli puolet koko elinjakson kustannuksista. Kun vielä päästörajat tiukkenevat koko ajan, korostuu polttoaineen korkea hyötykäyttö entisestään. Korkea energiantuotannon luotettavuus ja käytettävyys ovat myös elintärkeitä pyrittäessä kustannusten minimointiin. Tässä työssä on käyty läpi voimalaitoksen kustannuksiin vaikuttavia käsitteitä, kuten hyötysuhdetta, käytettävyyttä, polttoaineen hintoja, ylös- ja alasajoja ja tärkeimpiä häviöitä. Ajostrategiassa ja poikkeamien hallinnassa pyritään hyvään hyötysuhteeseen ja alhaisiin päästöihin joka käyttötilanteessa. Lisäksi on tarkasteltu tiettyjen suureiden, eli höyryn lämpötilan ja paineen, savukaasun hapen pitoisuuden, savukaasun loppulämpötilan, sekä lauhduttimen paineen poikkeamien vaikutusta ohjearvostaan energiantuotantokustannuksiin. Happi / hiilimonoksidi optimoinnissa on otettu huomioon myös pohjatuhkan palamattomat.

Adoption of an E-service Innovation and its Effects on Customer Service Processes in Forest Industry

Tämän tutkielman tavoitteena oli selvittää miten asiakkaille suunnattu Internet –pohjainen palvelu muuttaa asiakaspalvelua metsäteollisuudessa, ja mitkä tekijät vaikuttavat tällaisen palvelun omaksumiseen. Tutkimuksesta ilmenee että muutokset asiakaspalvelussa ovat olleet asiakkaiden mielestä pääasiassa positiivisia. Selvisi, että uuden sovelluksen laatuun ollaan tyytyväisiä, mutta että kaikki asiakkaat eivät pidä sen etuja huomattavina verrattuna vanhoihin toimintatapoihin. Esimerkkiyrityksen oma henkilöstö ei keskimäärin koe sovellusta kovin hyödylliseksi oman työnsä kannalta. Jotta sovelluksen käyttöä ja mahdollisia hyötyjä esimerkkiyritykselle saataisiin lisättyä, on sovellukseen tehtävien parannusten lisäksi panostettava tehokkaampaan kommunikointiin ja lisäkoulutukseen asiakkaille. Lisäksi on löydettävä keinoja, joiden avulla asiakkaat kokisivat sovelluksen käytön itselleen edullisemmaksi kuin pitäytymisen vanhoissa toimintatavoissa. Edellä mainitun saavuttaminen edellyttää esimerkkiyrityksen asiakaspalvelu-henkilöstön ja operatiivisen johdon sitoutumista sovelluksen aktiiviseen markkinointiin asiakkaiden suuntaan. Tutkimuksen aineisto kerättiin haastatteluilla ja asiakkaille suunnatulla kyselylomakkeella käyttäen pääasiassa kvalitatiivisia menetelmiä. Haastatteluja tehtiin kahdessa esimerkkiyrityksen yksikössä, kolmessa myyntikonttorissa sekä kahden asiakasyrityksen yhteensä neljässä eri yksikössä. Kyselylomake lähetettiin 215 asiakaskäyttäjälle, joista 30 palautti lomakkeen. Palautusprosentiksi tuli 14.

Aluminium fouling and its impact on activated carbon based dioxin and furan removal in a wet scrubber at a co-incineration plant

Dioxins and furans, PCDD/Fs, are highly toxic substances formed in post combustion zones in furnaces. PCDD/F emissions are regulated by a waste incineration directive which relates also to co-incineration plants. Several observations of dioxin and furan enhancements in wet scrub- bers have been reported previously. This is thought to be due to the so-called "memory effect" which occurs when dioxins and furans absorb into plastic material in scrubbers and desorb when ambient circumstances alter significantly. At the co-incineration plant involved, dioxins and furans are controlled with a wet scrubber, the tower packing of which is made of plastic in which activated carbon particles are dispersed. This should avoid the memory effect and act as a dioxin and furan sink since dioxins and furans are absorbed irreversibly into the packing ma- terial. In this case, the tower packing in the scrubber is covered with a white layer that has been found to be mainly aluminium. The aim of this thesis was to determine the aluminium balance and the dioxin and furan behaviour in the scrubber and, thus, the impacts that the foul- ing has on dioxin and furan removal. The source of aluminium, reasons for fouling and further actions to minimize its impacts on dioxin and furan removal were also to be discovered. Measurements in various media around the scrubber and in fuels were made and a profile analysis of PCDD/F and mass balance calculations were carried out. PCDD/F content de- creased in the scrubber. The reduced PCDD/F was not discharged into scrubbing water. The removal mechanism seems to work in spite of the fouling, at least with low PCDD/F loads. Most of the PCDD/F in excess water originates from the Kymijoki River which is used as feeding water in the scrubber. Fouling turned out to consist mainly of aluminium hydroxides. Sludge combusted in the furnace was found to be a significant source of aluminium. Ways to minimize the fouling would be adjustment of pH to a proper lever, installation of a mechanical filter to catch the loose material from the scrubbing water and affecting the aluminium content of the sludge.

Diversification and its reflections on profitability - strategic change in pulp and paper industry in the years 1996 and 2006

The purpose of the thesis was to analyze diversification in pulp and paper industry (PPI), which is an industry facing enormous strategic challenges as many of the basic parameters of its operational environment are rapidly changing. The objective was to explore, how PPI companies have reacted to these changes by adjusting their strategies in terms of diversification and how the adjustments have affected their profitability. The study was statistical in nature. The results indicate that PPI companies in deed had reduced the degree of unrelated and related diversification , but the positive performance implications of the changes were debatable. In light of the data used in the study lower level of diversification did not lead to better profitability, in fact, the companies with the highest level of diversification had the best profitability. By contrast, reducing the level of unrelated diversification improved the profitability development; whereas reducing the level of related diversification deteriorated the profitability of the company. The results were not statistically significant and they cannot be generalized outside the data of the study.

Russian Enterprise Restructuring - the Effect of Privatisation and Market Liberalisation on the Performance of Large Enterprises

The fundamental question in the transitional economies of the former Eastern Europe and Soviet Union has been whether privatisation and market liberalisation have had an effect on the performance of former state-owned enterprises. This study examines the effect of privatisation, capital market discipline, price liberalisation and international price exposure on the restructuring of large Russian enterprises. The performance indicators are sales, profitability, labour productivity and stock market valuations. The results do not show performance differences between state-owned and privatised enterprises. On the other hand, the expansion of the de novo private sector has been strong. New enterprises have significantly higher sales growth, profitability and labour productivity. However, the results indicate a diminishing effect of ownership. The international stock market listing has a significant positive effect on profitability, while the effect of domestic stock market listing is insignificant. The international price exposure has a significant positive increasing effect on profitability and labour productivity. International enterprises have higher profitability only when operating on price liberalised markets, however. The main results of the study are strong evidence on the positive effects of international linkages on the enterprise restructuring and the higher than expected role of new enterprises in the Russian economy.

The Influence of spanish vihuela and lute music on the development of early seventeenth century english keyboard music as exemplified in the Fitzwilliam virginal book

Digitoitu 29.10 2008.