Costs and Benefits of a Shared Digital Long-Term Preservation System

Paper presented at the 40th Annual Conference of LIBER (Ligue des Bibliothèques Européennes de Recherche - Association of European Research Libraries) on July 1st, 2011; with the slides used at the presentation.

Costs and Benefits of a Shared Digital Long-Term Preservation System

This paper describes the cost-benefit analysis of digital long-term preservation (LTP) that was carried out in the context of the Finnish National Digital Library Project (NDL) in 2010. The analysis was based on the assumption that as many as 200 archives, libraries, and museums will share an LTP system. The term ‘system’ shall be understood as encompassing not only information technology, but also human resources, organizational structures, policies and funding mechanisms. The cost analysis shows that an LTP system will incur, over the first 12 years, cumulative costs of €42 million, i.e. an average of €3.5 million per annum. Human resources and investments in information technology are the major cost factors. After the initial stages, the analysis predicts annual costs of circa €4 million. The analysis compared scenarios with and without a shared LTP system. The results indicate that a shared system will have remarkable benefits. At the development and implementation stages, a shared system shows an advantage of €30 million against the alternative scenario consisting of five independent LTP solutions. During the later stages, the advantage is estimated at €10 million per annum. The cumulative cost benefit over the first 12 years would amount to circa €100 million.

Alternative liquid biofuels for lime kilns

Causticizing plant is an important part of kraft pulp mill. It uses green liquor from recovery boiler as a raw material and consumes lime to produce white liquor, which is an important chemical used in pulping. Lime kiln is a part of the causticizing process. It is used to convert lime mud, a by-product obtained from the causticizing back to lime in high temperatures. This conversion requires a lot of energy. The most common fuels used as energy source for lime kiln are heavy fuel oil and natural gas. In a modern pulp mill lime kiln is the only user of significant amount of fossil fuels. Replacing fossil fuels with biofuels can have prominent economical and environmental benefits. Interest in using biofuels as energy source of lime kiln has become a worldwide issue in the recent years. However fuels used for lime kiln have a lot of certain requirements. The purpose of this work is to study the required characteristics from liquid fuels used in pulp mill lime kiln and to map suitable liquid biofuels already available in the markets. Also taxation of liquid biofuels compared to heavy fuel oil in Finland, Sweden and Germany is shortly introduced.

Benefits and challenges of supply chain finance business process automation : A case study in ING Bank

Supply chain finance, a financial product provided by the bank, has gained increasing attention and popularity over the last few years. Supply chain finance helps the corporate clients to optimize their financial flows along the supply chain. One characteristic of supply chain finance is that it aims to provide automated solutions. Therefore, the business process automation of supply chain finance is a very interesting and important topic for study. In this study, the business process automation of supply chain finance within the case organization, ING, is analysed. The purpose is to: (1) Identify the benefits to understand the importance to automate supply chain finance business process; (2) Find out the existing automation degree in the supply chain finance business process within the case bank to see what’s the situation now and how to improve in the future; (3) Discover the challenges in the further automation of supply chain finance business process. Firstly, the study finds out that supply chain finance business process automation can bring many benefits to the bank. Automation can improve productivity by using less time and human labour in the business process, and by providing scalable solutions. Automation can also improve quality of the service by reducing the human errors. Last but not least, automation can improve internal governance by providing enhanced visibility of the business process. Because of these potential benefits, many banks are actively seeking solutions to automate their supply chain finance business process. Then, the current automation situation with the case bank is analysed with the help of business process modelling. The supply chain finance business process within the case bank can be further divided into several sub processes: daily transaction, buyer sales and setup, supplier onboarding, contract management, customer services and supports, and contract termination. The study finds out that the daily transaction process is already a highly automated, which is carried out through the web-based trading platform. However, for other business the automation degree is relatively low. Among these business processes, supplier onboarding is most needed for further automation. Then, some solutions are also suggested to automate the supplier onboarding business process. In the end, the study also foresees some challenges during the further automation of supply chain finance business process in the case bank. Some suggestions are also given to deal with these challenges.

Applications and Benefits of Adaptive Pulsed GMAW

In ship and offshore terminal construction, welded cross sections are thick and the number of welds very high. Consequently, there are two aspects of great importance; cost and heat input. Reduction in the welding operation time decreases the costs of the work force and avoids excessive heat, preventing distortion and other weld defects. The need to increase productivity while using a single wire in the GMAW process has led to the use of a high current and voltage to improve the melting rate. Unfortunately, this also increases the heat input. Innovative GMAW processes, mostly implemented for sheet plate sections, have shown significant reduction in heat input (Q), low distortion and increase in welding speed. The aim of this study is to investigate adaptive pulsed GMAW processes and assess relevant applications in the high power range, considering possible benefits when welding thicker sections and high yield strength steel. The study experimentally tests the usability of adaptive welding processes and evaluates their effects on weld properties, penetration and shapes of the weld bead.The study first briefly reviews adaptive GMAW to evaluate different approaches and their applications and to identify benefits in adaptive pulsed. Experiments are then performed using Synergic Pulsed GMAW, WiseFusionTM and Synergic GMAW processes to weld a T-joint in a horizontal position (PB). The air gap between the parts ranges from 0 to 2.5 mm. The base materials are structural steel grade S355MC and filler material G3Si1. The experiment investigates heat input, mechanical properties and microstructure of the welded joint. Analysis of the literature reveals that different approaches have been suggested using advanced digital power sources with accurate waveform, current, voltage, and feedback control. In addition, studies have clearly indicated the efficiency of lower energy welding processes. Interest in the high power range is growing and a number of different approaches have been suggested. The welding experiments in this study reveal a significant reduction of heat input and a weld microstructure with the presence of acicular ferrite (AF) beneficial for resistance to crack propagation. The WiseFusion bead had higher dilution, due to the weld bead shape, and low defects. Adaptive pulse GMAW processes can be a favoured choice when welding structures with many welded joints. The total heat reduction mitigates residual stresses and the bead shape allows a higher amperage limit. The stability of the arc during the process is virtually spatter free and allows an increase in welding speed.

Effects of a Financial Transaction Tax - Do Transaction Costs Lower Volatility?: A Literature Review

In this literature review the theorethical framework of Financial transaction taxes and their assumed effect on market volatility is assessed. The empirical evidence from various studies is compared against the theory and a simple empirical review of the Finnish stock market is conducted. The findings implicate that financial transaction taxes can not reduce volatility and their actual effect on markets is dependend by many other factors as well. Some evidence even suggests that transactions taxes may actually raise volatility.

Taloushallinnon eettiset ongelmat verotarkastuskertomuksista tehtyjen havaintojen perusteella

Tässä tutkielmassa tutkittiin taloushallinnon eettisiä ongelmakohtia käyttäen aineistona verotarkastuskertomuksia. Tutkielman tavoitteena oli selvittää onko taloushallinnon eettisissä ratkaisuissa kyse kirjanpitäjän vai yrittäjän etiikasta, voidaanko verotarkastuksella havaitut virheet jaotella tahallisiin ja tahattomiin ja voidaanko näistä virheistä tehdä johtopäätöksiä veronmaksumyönteisyydestä. Kirjanpitäjän ja yrittäjän etiikan havaittiin ilmenevän eri tavoilla. Jos etiikkaa pohdittiin veronmaksuhalukkuuden merkityksessä, niin tällöin kyse oli yrittäjän etiikasta. Verotarkastuksilla havaitut virheet jaoteltiin virhetyyppeihin, joita käytettiin veronmaksumyönteisyyden analysointiin. Tutkielmassa käytettyjä virhetyyppejä olivat muun muassa luontois- ja henkilökuntaedut, kustannusten korvaukset ja edustusmenot. Veronmaksumyönteisyydessä havaittiin selviä eroja eri virhetyyppien välillä. Suurin osa virhetyypeistä kuului veronmaksumyönteisyyden perusteella joukkoon, jossa lakeja noudatetaan vain valvonnan alaisena. Näitä virheitä tekevien kohdalla verovalvonnan kattavuudella saavutetaan parhaat tulokset.

Diversification benefits for a Finnish non-industrial private forest investor: Real Estate Investment Trusts in the USA

This thesis examined both domestic and international forest investment options for a Finnish non-industrial private forest investor. The focus was on forest-based investment instruments. The influence of movements of currency exchange rates on foreign returns were also taken into account. Annual data from 1995 to 2011 was used. The main portfolio optimization model in this study was the Mean-Variance model but the results were also validated by using the Value at Risk and Expected Shortfall models. In addition, the exchange rate risk hedging was established by using one-week-maturity forward contracts. The results suggested that 75 % of the total wealth should be invested in Finnish private forests and the rest, 25 %, to a US REIT, in this case Rayonier. With hedging, the total return on the portfolio was 7.21 % (NIPF 5.3%) with the volatility of 6.63 % (NIPF 7.9%). Taxation supported US investments in this case. As a conclusion, a Finnish private forest investor may, as evidenced, benefit in diversifying a portfolio using REITs in the US.

Implementing an open data system and showing its benefits

Open data refers to publishing data on the web in machine-readable formats for public access. Using open data, innovative applications can be developed to facilitate people‟s lives. In this thesis, based on the open data cases (discussed in the literature review), Open Data Lappeenranta is suggested, which publishes open data related to opening hours of shops and stores in Lappeenranta City. To prove the possibility of creating Open Data Lappeenranta, the implementation of an open data system is presented in this thesis, which publishes specific data related to shops and stores (including their opening hours) on the web in standard format (JSON). The published open data is used to develop web and mobile applications to demonstrate the benefits of open data in practice. Also, the open data system provides manual and automatic interfaces which make it possible for shops and stores to maintain their own data in the system. Finally in this thesis, the completed version of Open Data Lappeenranta is proposed, which publishes open data related to other fields and businesses in Lappeenranta beyond only stores‟ data.

Potential benefits of building information modeling for building material supplier

This thesis investigated building information modeling (BIM) from a material supplier’s point of view. The objective was to gain understanding about how a building material supplier could benefit from the growing use of BIM in the AEC (architectural, engineering and construction) industry. Increasing amount of inquiries related to BIM from customers and other interest groups had awoken target company’s interest towards BIM. This thesis acts as a pre-study for the target company related to potential of BIM. First of all BIM and its meaning from a material supplier’s point of view was defined based on a literature review. To reveal the potential benefits of BIM for a material supplier a questionnaire survey and in total of 11 interviews were conducted. Based on the literature review and analyzed results it came clear that BIM offers benefits also for material suppliers. Product libraries and material databases for BIM tools can act as an important marketing channel for material suppliers. Material suppliers could also utilize the information from the BIM models to schedule their deliveries more precisely and potentially even to schedule their own production. All this needs deeper cooperation between material suppliers, contractors and other stakeholders in the AEC industry. Based on the results also first steps for the target company to utilize the growing use of BIM were defined.

Corporate Social Responsibility and Shipping Views of Baltic Sea Shipping Companies on the Benefits of Responsibility

The safety of shipping operations in the Baltic Sea is an extensively studied issue due to the density of traffic and the ecological sensitivity of the area. The focus has, however, mainly been on ship technology or on traffic control measures and the operative safety aspect of shipping is in a minor position in maritime safety studies and is lacking in terms of solutions. Self-regulatory and voluntary measures could be effective ways to improve the operational safety of shipping. Corporate social responsibility, or CSR, is one example of a voluntary measure that the shipping companies can take. CSR can enhance maritime safety and improve the shipping companies’ competitiveness. The aim of this study is to increase the knowledge of CSR in the maritime sector and study its applicability and benefits to the shipping companies. The research comprises of a theory part and a questionnaire study, which examine the significance of corporate social responsibility in shipping companies’ maritime safety and competitiveness. The aim of the questionnaire study is to find out how corporate social responsibility is implemented in the shipping companies. According to the literature review, responsible actions can produce financial and time costs, but due to these actions cost savings in the form of learning and increased efficiency can be achieved. Responsible actions can also produce concrete improvements and a reputation of responsibility that can lead to both cost savings and increase in the company’s income. CSR is recognised as having real business benefits in terms of attracting customers and high-quality employees. In shipping, CSR usually focuses on environmental issues. Environmental social responsibility in shipping is mainly motivated by the need to comply with existing and forthcoming regulation. Shipping companies engage in CSR to gain competitive advantage and to increase maritime safety. The social aspects of CSR take into account the well-being and skills of the employees, corporation and other stakeholders of the company. The questionnaire study revealed that the most common CSR measures in shipping companies are environmental measures, and that environmental concerns are considered to be the most important reason to engage in CSR. From the preliminary question about the concept of CSR it can also be seen that safety issues are commonly considered to be a part of CSR and safety gains are the second most important reason to engage in CSR. From the questionnaire, it can also be extrapolated that gaining a better reputation is one of the most important reasons to engage in CSR in the first place. For example, the main economic benefit was seen to be the increase of customer numbers as a result of a better reputation. Based on the study, it would seem that companies are starting to realise that they might gain competitive advantage and be favoured as shippers if they engage in sustainable, responsible operations and present themselves as “green”.

Effects of obtained benefits on willingness to pay and word-of-mouth behavior in newspaper industry

The purpose of this master’s thesis was to investigate the effects which benefits obtained from reading a newspaper and using its website have on behavioral outcomes such as word-of-mouth behavior and willingness to pay. Several other antecedents of willingness to pay have been used as the control variables. However, their interrelations haven’t been hypothesized. The empirical part focused on a case company – Finnish regional newspaper. Empirical research has been conducted using a quantitative method and data was collected via online survey placed on newspaper’s website during 2010. 1001 responses have been collected. The results showed that benefits obtained both from traditional printed newspaper and from online one have positive effects on the word-of-mouth about this newspaper and its website. However, it has been revealed that benefits obtained from reading the newspaper don’t have effect on the willingness to pay for this newspaper. Additionally, only interpersonal and convenience benefits obtained from using the newspaper’s website influence on the willingness to pay for it. Finally, willingness to pay for the bundle of printed newspaper and its website access is affected positively only by the information/learning benefits obtained from reading the newspaper and by the interpersonal benefits obtained from using the newspaper’s website.