Modeling and Control of the Power Conversion Unit in a Solid Oxide Fuel Cell Environment

In this doctoral thesis, a power conversion unit for a 10 kWsolid oxide fuel cell is modeled, and a suitable control system is designed. The need for research was identified based on an observation that there was no information available about the characteristics of the solid oxide fuel cell from the perspective of power electronics and the control system, and suitable control methods had not previously been studied in the literature. In addition, because of the digital implementation of the control system, the inherent characteristics of the digital system had to be taken into account in the characteristics of the solid oxide fuel cell (SOFC). The characteristics of the solid oxide fuel cell as well the methods for the modeling and control of the DC/DC converter and the grid converter are studied by a literature survey. Based on the survey, the characteristics of the SOFC as an electrical power source are identified, and a solution to the interfacing of the SOFC in distributed generation is proposed. A mathematical model of the power conversion unit is provided, and the control design for the DC/DC converter and the grid converter is made based on the proposed interfacing solution. The limit cycling phenomenon is identified as a source of low-frequency current ripple, which is found to be insignificant when connected to a grid-tied converter. A method to mitigate a second harmonic originating from the grid interface is proposed, and practical considerations of the operation with the solid oxide fuel cell plant are presented. At the theoretical level, the thesis discusses and summarizes the methods to successfully derive a model for a DC/DC converter, a grid converter, and a power conversion unit. The results of this doctoral thesis can also be used in other applications, and the models and methods can be adopted to similar applications such as photovoltaic systems. When comparing the results with the objectives of the doctoral thesis, we may conclude that the objectives set for the work are met. In this doctoral thesis, theoretical and practical guidelines are presented for the successful control design to connect a SOFC-based distributed generation plant to the utility grid.

Design of an amplifier and an instrumentation setup for a harsh environment heat flux measurement application – case axial flux electric machine

Measurement is a tool for researching. Therefore, it is important that the measuring process is carried out correctly, without distorting the signal or the measured event. Researches of thermoelectric phenomena have been focused more on transverse thermoelectric phenomena during recent decades. Transverse Seebeck effect enables to produce thinner and faster heat flux sensor than before. Studies about transverse Seebeck effect have so far focused on materials, so in this Master’s Thesis instrumentation of transverse Seebeck effect based heat flux sensor is studied, This Master’s Thesis examines an equivalent circuit of transverse Seebeck effect heat flux sensors, their connectivity to electronics and choosing and design a right type amplifier. The research is carried out with a case study which is Gradient Heat Flux Sensors and an electrical motor. In this work, a general equivalent circuit was presented for the transverse Seebeck effect-based heat flux sensor. An amplifier was designed for the sensor of the case study, and the solution was produced for the measurement of the local heat flux of the electric motor to improve the electromagnetic compatibility.

Industrial solution business – transition from product to solution offering

The business logic in the manufacturing industry has changed in the 21st century. In the current industrial market, manufacturers are driven to provide more comprehensive offerings that go beyond the traditional product-orientation by providing capacity and availability for their customers. From incidental merchandise, services have become the core of manufacturers’ offerings with long-lasting service agreements over the life-cycles of their products. This change is driven both by the need of providers to grow and gain competitive advantage and by increased customer demand caused by customers’ outsourcing trends. The three key drivers for manufacturers’ service strategies are outsourcing trends, saturation of the installed base, and commoditization in product markets. Thus, manufacturers focus on providing industrial solutions which are delivered through relational processes with customers by using solution-driven business models. In the management of marketing activities, this can be regarded as closer customer relationships, service-dominant business logic, and collaboration in solving customers’ problems. However, there are few studies on comprehensive conceptualizations of a solution offering that include different elements and their roles, especially in the context of capital goods industry. Also the transition process needs further studies in a real life context. This study explores the transition process of an industrial company from product to solution business and, as an aid to managing the solution business, explicates the structure and management of an industrial solution offering. There are two themes, the industrial transition process and industrial solution offering. Regarding the industrial transition process, the aim is to understand the supplier view on the process and its execution and to determine the challenges related to the transition process. The industrial solution offering is discussed by its elements and characteristics, as well as management. Furthermore, a special type of build-own-operate-transfer business model is presented and its suitability in the industrial context analyzed. The study includes findings achieved by qualitative methods and from four case companies. Based on the results, it is tentatively suggested that in the industrial solution business, the transition from product to solution business is not a linear project but an evolving process that varies according to customer needs, which suggests that companies need to possess an ability to develop new business models for different customer needs. The industrial solution offering is dynamic as it evolves in collaboration according to the prevailing and latent customer needs, which suggest restructuring of the organization from a product-centric to a customer-centric one. Furthermore, based on the findings, the concept of industrial solutions is defined as an ongoing relational process to satisfy a customer’s particular business or operational requirements, and the concept of industrial solution offering as an entity comprising the customized goods, services, collaboration, and finance needed to fulfill the industrial solution. Finally, the study offers several managerial implications for industrial managers involved in the transition and management of the solution business and its offering.

University Institutional Repository and its Place in the University Information Infrastructure

Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014

Optimization and Measuring Techniques for Collect-and-Place Machines in Printed Circuit Board Industry

This thesis considers optimization problems arising in printed circuit board assembly. Especially, the case in which the electronic components of a single circuit board are placed using a single placement machine is studied. Although there is a large number of different placement machines, the use of collect-and-place -type gantry machines is discussed because of their flexibility and increasing popularity in the industry. Instead of solving the entire control optimization problem of a collect-andplace machine with a single application, the problem is divided into multiple subproblems because of its hard combinatorial nature. This dividing technique is called hierarchical decomposition. All the subproblems of the one PCB - one machine -context are described, classified and reviewed. The derived subproblems are then either solved with exact methods or new heuristic algorithms are developed and applied. The exact methods include, for example, a greedy algorithm and a solution based on dynamic programming. Some of the proposed heuristics contain constructive parts while others utilize local search or are based on frequency calculations. For the heuristics, it is made sure with comprehensive experimental tests that they are applicable and feasible. A number of quality functions will be proposed for evaluation and applied to the subproblems. In the experimental tests, artificially generated data from Markov-models and data from real-world PCB production are used. The thesis consists of an introduction and of five publications where the developed and used solution methods are described in their full detail. For all the problems stated in this thesis, the methods proposed are efficient enough to be used in the PCB assembly production in practice and are readily applicable in the PCB manufacturing industry.

Ball Bearing Model Performance on Various Sized Rotors with and without Centrifugal and Gyroscopic Forces

Bearing performance signi cantly a ects the dynamic behaviors and estimated working life of a rotating system. A common bearing type is the ball bearing, which has been under investigation in numerous published studies. The complexity of the ball bearing models described in the literature varies. Naturally, model complexity is related to computational burden. In particular, the inclusion of centrifugal forces and gyroscopic moments signi cantly increases the system degrees of freedom and lengthens solution time. On the other hand, for low or moderate rotating speeds, these e ects can be neglected without signi cant loss of accuracy. The objective of this paper is to present guidelines for the appropriate selection of a suitable bearing model for three case studies. To this end, two ball bearing models were implemented. One considers high-speed forces, and the other neglects them. Both models were used to study a three structures, and the simulation results were.

Value-based selling of the column connection solution as part of project sales

The objective of this study was to find out how third party influencers can facilitate value-based selling in a network and how suppliers should aim to impact on these third party influencers to facilitate value-based selling. The study considers construction industry, selling the column connection solution and third party influencers. Third party influencers examined in this study were structural designers. The study also aims to find out structural designers’ value drivers and the differences between the market areas that this study related to. The theoretical part of the study focuses on two separate areas. The first part of the theory focuses on a value-based selling concept: what it is, what it requires and what are the main barriers for value-based selling. The second part of the theory examines value creation in networks. The present knowledge over value creation in networks and different network actors are presented. Project marketing is also discussed briefly because this study’s topic, which is highly related to project business. The results reveal structural designers’ value drivers considering the usage of the column connection solution and present ways how suppliers should aim to impact structural designers to facilitate value-based selling. The main result of the study indicates that third party influencers can have a positive impact on facilitating value-based selling. Structural designers are communicating more or less with all the salient actors in different project phases and they can act as sponsors to support the sales of Peikko’s column connection solution and promote solution to other actors involved to the project. This requires that structural designers can understand the actual benefits of how the solution can improve their and their customers’ business.

Motives and barriers for engaging in collaborative consumption in Finland

In this thesis the consumers’ expected motives and barriers for engaging in collaborative consumption in Finland are studied. The phenomenon is observed through the lens of consumer theory and it is connected to the context using Hofstede’s 6-D model. The phenomenon is new and there are almost no recorded results in the background research, and when considering the limitations of this study, there are no results at all. Therefore, combining different kinds of literature, as well as taking along consumer theory and Hofstede’s model that explains cultural factors, it was possible to compile a comprehensive general view of the present state of the phenomenon. The actual study was conducted using qualitative methods and the solution was sought collecting data from six in-depth interviews with interviewees having experience from using, or offering resources, or both. According to the results, the primary motive in all modes of consumption was economic. Anti-materialism, anti-consumption, and expanding lifestyle were another a bit more general motives. Perceived barriers were, especially as a new result, the amount of trouble one has to see and in single modes, a lack of trust, the used platform and too expensive prices.

Ympäristötietämyksen hallintasovelluksen kehittäminen

Uudistunut ympäristölainsäädäntö vaatii energiantuotantolaitoksilta yhä enemmän järjestelmällistä ympäristötiedon hallintaa. LCP- ja jätteenpolttoasetuksen velvoitteet ovat asettaneet uusia vaatimuksia päästöjen valvontaan ja siihen käytettävien mittausjärjestelmien laadunvarmennukseen sekä päästötietojen raportointiin. Uudistukset ovat lisänneet huomattavasti laitoksilla ympäristötiedon käsittelyyn kuluvaa aikaa. Laitosten toimintaehdot määritellään ympäristöviranomaisen myöntämässä ympäristöluvassa, joka on tärkein yksittäinen laitoksen toimintaa ohjaava tekijä. Tämän lisäksi monet toimijat haluavat parantaa ympäristöasioiden tasoaan vapaaehtoisilla ympäristöjärjestelmillä. Tässä diplomityössä kuvataan energiantuotantolaitosten ympäristöasioiden tallentamiseen ja hallintaan kehitetty selainpohjainen Metso Automationin DNAecoDiary'sovellus. Työ on rajattu koskemaan Suomessa toimivia LCP- ja/tai jätteenpolttoasetuksen alaisia laitoksia. Sovelluksen avulla voidaan varmistaa energiantuotantolaitosten poikkeamien, häiriöilmoitusten, päästömittalaitteisiin liittyvien tapahtumien ja muun ympäristöasioiden valvontaan liittyvän informaation tehokas hallinta. Sovellukseen tallennetaan ympäristötapahtumiin liittyvät perustiedot sekä etenkin käyttäjien tapahtumiin liittyvä kokemustietämys. Valvontakirjaukseen voidaan liittää tapahtuman perustietojen lisäksi myös tiedostoja ja kuvia. Sovellusta ja sillä kerättyä tietoa voidaan hyödyntää laitoksella käsilläolevien ongelmien ratkaisuun, ympäristötapahtumien todentamiseen sekä ympäristöraporttien laadintaan. Kehitystyön tueksi järjestettiin asiakastarvekartoitus, jonka perusteella ideoitiin sovelluksen ominaisuuksia. Tässä työssä on esitetty ympäristötiedon hallinan perusteet, selvitetty DNAecoDiaryn toimintaperiaatteet ja annettu esimerkkejä sen hyödyntämisestä. Sovelluksen lopullinen sisältö määritellään kunkin asiakkaan ympäristöluvan ja oma-valvonnan tarpeiden mukaisesti. Sovellus toimii itsenäisesti tai osana laajempaa Metso Automationin päästöjenhallinta- ja raportointisovelluskokonaisuutta.

Voimalaitoksen ylläpitosuunnitelma

Tässä diplomityössä on tehtyylläpitosuunnitelma Oulun Energian Toppila 1 - voimalaitokselle, jota on tavoitteena käyttää vuoteen 2015. Työssä on tarkasteltu aluksi voimalaitoksen tulevaisuuden käytön näkymiä ja tärkeimpien järjestelmien käyttökuntoa. Kattilalaitoksenkriittisille komponenteille on suoritettu ylläpito- ja epäkäytettävyyskustannusten vertailu sekä pyritty selvittämään komponenteille paras ylläpitomalli. Turbiinille on analysoitu erilaisia revisio- ja tarkastusmahdollisuuksia, ja vertailtu niistä muodostuvia kustannuksia. Tulosten perusteella voidaan sanoa, että tehostetut ylläpitotoimenpiteet ovat jatkossa kriittisille komponenteille taloudellisin ylläpitomalli, koska riittävällä määrällä tarkastuksia jakorjauksia voidaan hallita ongelmallisimpien komponenttien vaurioitumiskäyttäytymistä. Jos voimalaitosta käytetään vuoteen 2015, saattavat uusia investointeja olla eko I, eko II ja tertiääritulistin. Tämän työn perusteella investointeja eikannata tehdä, mutta komponenttien kuntoa sen sijaan on syytä arvioida vuosittain. Turbiinin kriittiset komponentit vaikuttaisivat olevan suhteellisen hyvässä kunnossa. Suurimmat vaurioitumismahdollisuudet liittyvät juoksusiipien väsymisvaurioihin.

Conflict-based Method for Conceptual Process Synthesis

The changing business environment demands that chemical industrial processes be designed such that they enable the attainment of multi-objective requirements and the enhancement of innovativedesign activities. The requirements and key issues for conceptual process synthesis have changed and are no longer those of conventional process design; there is an increased emphasis on innovative research to develop new concepts, novel techniques and processes. A central issue, how to enhance the creativity of the design process, requires further research into methodologies. The thesis presentsa conflict-based methodology for conceptual process synthesis. The motivation of the work is to support decision-making in design and synthesis and to enhance the creativity of design activities. It deals with the multi-objective requirements and combinatorially complex nature of process synthesis. The work is carriedout based on a new concept and design paradigm adapted from Theory of InventiveProblem Solving methodology (TRIZ). TRIZ is claimed to be a `systematic creativity' framework thanks to its knowledge based and evolutionary-directed nature. The conflict concept, when applied to process synthesis, throws new lights on design problems and activities. The conflict model is proposed as a way of describing design problems and handling design information. The design tasks are represented as groups of conflicts and conflict table is built as the design tool. The general design paradigm is formulated to handle conflicts in both the early and detailed design stages. The methodology developed reflects the conflict nature of process design and synthesis. The method is implemented and verified through case studies of distillation system design, reactor/separator network design and waste minimization. Handling the various levels of conflicts evolve possible design alternatives in a systematic procedure which consists of establishing an efficient and compact solution space for the detailed design stage. The approach also provides the information to bridge the gap between the application of qualitative knowledge in the early stage and quantitative techniques in the detailed design stage. Enhancement of creativity is realized through the better understanding of the design problems gained from the conflict concept and in the improvement in engineering design practice via the systematic nature of the approach.

Studies on integrating kinematic design method with mechanical systems simulation techniques

Theultimate goal of any research in the mechanism/kinematic/design area may be called predictive design, ie the optimisation of mechanism proportions in the design stage without requiring extensive life and wear testing. This is an ambitious goal and can be realised through development and refinement of numerical (computational) technology in order to facilitate the design analysis and optimisation of complex mechanisms, mechanical components and systems. As a part of the systematic design methodology this thesis concentrates on kinematic synthesis (kinematic design and analysis) methods in the mechanism synthesis process. The main task of kinematic design is to find all possible solutions in the form of structural parameters to accomplish the desired requirements of motion. Main formulations of kinematic design can be broadly divided to exact synthesis and approximate synthesis formulations. The exact synthesis formulation is based in solving n linear or nonlinear equations in n variables and the solutions for the problem areget by adopting closed form classical or modern algebraic solution methods or using numerical solution methods based on the polynomial continuation or homotopy. The approximate synthesis formulations is based on minimising the approximation error by direct optimisation The main drawbacks of exact synthesis formulationare: (ia) limitations of number of design specifications and (iia) failure in handling design constraints- especially inequality constraints. The main drawbacks of approximate synthesis formulations are: (ib) it is difficult to choose a proper initial linkage and (iib) it is hard to find more than one solution. Recentformulations in solving the approximate synthesis problem adopts polynomial continuation providing several solutions, but it can not handle inequality const-raints. Based on the practical design needs the mixed exact-approximate position synthesis with two exact and an unlimited number of approximate positions has also been developed. The solutions space is presented as a ground pivot map but thepole between the exact positions cannot be selected as a ground pivot. In this thesis the exact synthesis problem of planar mechanism is solved by generating all possible solutions for the optimisation process ¿ including solutions in positive dimensional solution sets - within inequality constraints of structural parameters. Through the literature research it is first shown that the algebraic and numerical solution methods ¿ used in the research area of computational kinematics ¿ are capable of solving non-parametric algebraic systems of n equations inn variables and cannot handle the singularities associated with positive-dimensional solution sets. In this thesis the problem of positive-dimensional solutionsets is solved adopting the main principles from mathematical research area of algebraic geometry in solving parametric ( in the mathematical sense that all parameter values are considered ¿ including the degenerate cases ¿ for which the system is solvable ) algebraic systems of n equations and at least n+1 variables.Adopting the developed solution method in solving the dyadic equations in direct polynomial form in two- to three-precision-points it has been algebraically proved and numerically demonstrated that the map of the ground pivots is ambiguousand that the singularities associated with positive-dimensional solution sets can be solved. The positive-dimensional solution sets associated with the poles might contain physically meaningful solutions in the form of optimal defectfree mechanisms. Traditionally the mechanism optimisation of hydraulically driven boommechanisms is done at early state of the design process. This will result in optimal component design rather than optimal system level design. Modern mechanismoptimisation at system level demands integration of kinematic design methods with mechanical system simulation techniques. In this thesis a new kinematic design method for hydraulically driven boom mechanism is developed and integrated in mechanical system simulation techniques. The developed kinematic design method is based on the combinations of two-precision-point formulation and on optimisation ( with mathematical programming techniques or adopting optimisation methods based on probability and statistics ) of substructures using calculated criteria from the system level response of multidegree-of-freedom mechanisms. Eg. by adopting the mixed exact-approximate position synthesis in direct optimisation (using mathematical programming techniques) with two exact positions and an unlimitednumber of approximate positions the drawbacks of (ia)-(iib) has been cancelled.The design principles of the developed method are based on the design-tree -approach of the mechanical systems and the design method ¿ in principle ¿ is capable of capturing the interrelationship between kinematic and dynamic synthesis simultaneously when the developed kinematic design method is integrated with the mechanical system simulation techniques.

Tuotehallinnan kehittämismahdollisuudet puutuoteteollisuuden konetoimittajalla

Työn tavoitteena oli selvittää niitä keinoja, joiden avulla Raute Woodin nykyistä tuotehallintaa pystytään kehittämään. Aluksi kartoitettiin tuotehallinnan kannalta olennaisia työkaluja. Korkean teknologian tuotteet asettavat tuotehallinnalle olennaisesti kovemmat vaatimukset, sillä tuotteen hallinta ei rajoitu pelkästään mekaanisen mallin hallintaan. Jotta tuotteita jatkossa pystyttäisiin hallitsemaan täydellisinä kokonaisuuksina tarvitaan toimintamalli, jonka pohjalta tuotteeseen liittyvät tiedot saadaan hallittua yhtenäisesti.Kehittämistoimenpiteiden lähtökohdaksi kuvattiin tuotehallinnan ja tilaus-toimitusprosessin nykytilanne. Nykytilanteesta etsittiin ne tekijät, jotka vaikuttavat kaikkein suurimmassa määrin havaittuihin tuotehallinnan ongelmiin. Havaittujen ongelmien ja valittujen ratkaisumetodien pohjalta alettiin suunnitella keinoja tuotehallinnan kehittämiseksi. Lopputuloksena esitetään ratkaisuehdotus tuotehallinnan tulevaisuuden hallintamalliksi. Ratkaisuehdotuksessa esitetään teorian pohjalta johdetut mallit tuotteiden kokonaisvaltaiseen hallintaan sekä kuvataan tilaus-toimitusprosessi tuotteen näkökulmasta. Ehdotuksessa kuvataan myös uusi tuotetunnistejärjestelmä, jonka pohjalta tuotteet voidaan jatkossa yksilöidä yksiselitteisesti. Tuotetunnistejärjestelmä tukee työssä kehitettyä uutta modulaarista tuoterakennemallia. Lisäksi esitellään tuotemalliajattelun soveltumista mahdolliseen uuteen tuotehallintaratkaisuun ja sen tuomia uusia mahdollisuuksia toiminnan kehittämiseen.

Disc Filter External Models in an Integrated Simulation Environment

Työssä tutkittiin kiekkosuodattimeen liittyviä ulkoisia simulointimalleja integroidussa simulointiympäristössä. Työn tarkoituksena oli parantaa olemassa olevaa mekanistista kiekkosuodatinmallia. Malli laadittiin dynaamiseen paperiteollisuuden tarpeisiin tehtyyn simulaattoriin (APMS), jossa olevaan alkuperäiseen mekanistiseen malliin tehtiin ulkoinen lisämalli, joka käyttää hyväkseen kiekkosuodatinvalmistajan mittaustuloksia. Laitetiedon saatavuutta suodattimien käyttäjille parannettiin luomalla Internetissä sijaitsevalle palvelimelle kiekkosuodattimen laitetietomäärittelyt. Suodatinvalmistaja voi palvella asiakkaitaan viemällä laitetiedot palvelimelle ja yhdistämällä laitetiedon simulointimalliin. Tämä on mahdollista Internetin ylitse käytettävän integroidun simulointiympäristön avulla, jonka on tarkoitus kokonaisvaltaisesti yhdistää simulointi ja prosessisuunnittelu. Suunnittelijalle tarjotaan työkalut, joilla dynaaminen simulointi, tasesimulointi ja kaavioiden piirtäminen onnistuu prosessilaitetiedon ollessa saatavilla. Nämä työkalut on tarkoitus toteuttaa projektissa nimeltä Galleria, jossa luodaan prosessimalli- ja laitetietopalvelin Internetiin. Gallerian käyttöliittymän avulla prosessisuunnittelija voi käyttää erilaisia simulointiohjelmistoja ja niihin luotuja valmiita malleja, sekä saada käsiinsä ajan tasalla olevaa laitetietoa. Ulkoinen kiekkosuodatinmalli laskee suodosvirtaamat ja suodosten pitoisuudet likaiselle, kirkkaalle ja superkirkkaalle suodokselle. Mallin syöttöparametrit ovat kiekkojen pyörimisnopeus, sisään tulevan syötön pitoisuus, suotautuvuus (freeness) ja säätöparametri, jolla säädetään likaisen ja kirkkaan suodoksen keskinäinen suhde. Suotautuvuus kertoo mistä massasta on kyse. Mitä suurempi suotautuvuus on, sitä paremmin massa suodattuu ja sitä puhtaampia suodokset yleensä ovat. Mallin parametrit viritettiin regressioanalyysillä ja valmistajan palautetta apuna käyttäen. Käyttäjä voi valita haluaako hän käyttää ulkoista vai alkuperäistä mallia. Alkuperäinen malli täytyy ensin alustaa antamalla sille nominaaliset toimintapisteet virtaamille ja pitoisuuksille tietyllä pyörimisnopeudella. Ulkoisen mallin yhtälöitä voi käyttää alkuperäisen mallin alustamiseen, jos alkuperäinen malli toimii ulkoista paremmin. Ulkoista mallia voi käyttää myös ilman simulointiohjelmaa Galleria-palvelimelta käsin. Käyttäjälle avautuu näin mahdollisuus tarkastella kiekkosuodattimien parametreja ja nähdä suotautumistulokset oman työasemansa ääreltä mistä tahansa, kunhan Internetyhteys on olemassa. Työn tuloksena kiekkosuodattimien laitetiedon saatavuus käyttäjille parani ja alkuperäisen simulointimallin rajoituksia ja puutteita vähennettiin.

Service Architecture in Mobile IP Telephony Network

Uudet palvelut ovat tarkeinta, mita asiakkaat odottavat uudelta teknologialta.Se on paaasiallinen syy siihen, etta asiakkaat ovat valmiita maksamaan uudesta teknologiasta ja kayttamaan sita. Sen vuoksi uuden verkon tuoma uusi palveluarkkitehtuuri on tarkea koko projektin onnistumiselle. Tama dokumentti keskittyy kolmannen sukupolven matkapuhelinverkkojen palveluarkkitehtuuriin, jonka viitemallista annetaan kuvaus. Verkon palvelut esitellaan ja kuvaillaan. Toteutukseen liittyvia asioita selostetaan. USA:n markkinoilla tarvittava WIN konsepti kuvataan ja sen toteutuksesta annetaan myos kuvaus. Lopussa kuvataan Pre-Paid tilaajien laskutustietojen kasittelya WIN konseptissa elvytystilanteessa.