Metsäkoneen nostopuomin valmistuksen tehostaminen

Diplomityö käsittelee nostopuomin hitsauksen ja koneistuksen kehittämistä alihankinta-konepajassa. Työn tavoitteena on nostopuomin valmistuksen tehostaminen. Työssä kes-kitytään hitsauksen osalta tuotantolayoutin kehittämiseen, kaariaikasuhteen parantami-seen sekä hitsausmuodonmuutosten ehkäisyyn ja ennakointiin. Koneistuksessa keskity-tään tuotantolayoutin kehittämiseen sekä kappaleen kiinnittämiseen ja työkaluvalintoi-hin. Työn teoriaosa käsittelee hitsauksen ja koneistuksen seikkoja, jotka vaikuttavat valmis-tuksen tehokkuuteen. Lisäksi teoriaosassa perehdytään tuotantomuotoihin, tuotantojär-jestelmiin ja tuotannonohjaukseen. Käytännön osuudessa käsitellään niitä valmistuksen tehostamiskeinoja, jotka soveltuvat metsäkoneen nostopuomien sarjatuotantoon Jormet Oy:ssä. Työssä esitellään valmistuksen työvaiheet sekä selvitetään tuotannon ongelmakohdat ja pullonkaulat. Ongelmana tuotannossa on suuri jalostamattoman työn osuus, joka koos-tuu siirroista, nostoista, muodonmuutosten oikomisesta sekä koneistuksessa puomin kiinnittämisestä ja irrottamisesta. Layout muutokset, hitsauskiinnittimien ja pyörityslaitteiden kehittäminen sekä töiden ohjeistus nostavat kaariaikasuhdetta ja lyhentävät hitsausaikaa. Koneistuksessa layoutin ja kiinnittimen kehittäminen vähentävät jalostamattoman työn osuutta parantaen samalla koneistuksen tehokkuutta. Lastuamistehokkuus paranee oikeiden työkalu- ja parametri-valintojen avulla.

Prediction in transformed images

The study is related to lossless compression of greyscale images. The goal of the study was to combine two techniques of lossless image compression, i.e. Integer Wavelet Transform and Differential Pulse Code Modulation to attain better compression ratio. This is an experimental study, where we implemented Integer Wavelet Transform, Differential Pulse Code Modulation and an optimized predictor model using Genetic Algorithm. This study gives encouraging results for greyscale images. We achieved a better compression ration in term of entropy for experiments involving quadrant of transformed image and using optimized predictor coefficients from Genetic Algorithm. In an other set of experiments involving whole image, results are encouraging and opens up many areas for further research work like implementing Integer Wavelet Transform on multiple levels and finding optimized predictor at local levels.

Development of phase retrieval algorithm and techniques for optical spectrum analysis

Coherent anti-Stokes Raman scattering is the powerful method of laser spectroscopy in which significant successes are achieved. However, the non-linear nature of CARS complicates the analysis of the received spectra. The objective of this Thesis is to develop a new phase retrieval algorithm for CARS. It utilizes the maximum entropy method and the new wavelet approach for spectroscopic background correction of a phase function. The method was developed to be easily automated and used on a large number of spectra of different substances.. The algorithm was successfully tested on experimental data.

Sitoutumiskykyisemmän TMP-massan valmistus

Tämän työn tavoitteena oli selvittää TMP-massan lujuusominaisuuksien parantamismahdollisuuksia jauhatuksen keinoin. Tarkastelun kohteena olivat rejektijauhatuksen eriyttäminen päälinjasta, päälinjan ajotapojen vaikutukset massan laatuun sekä energiansäästöterien testaus. Erillisen rejektijauhatuksen pilot kokeiden myötä oli havaittavissa, että erillisjauhettu rejekti itsessään oli todella pitkäkuituista ja hyvät lujuusominaisuudet omaavaa massaa. Koeajo kuitenkin osoitti, että 9 % annostelu määrä päälinjan akseptimassaan ei riitä nostamaan valmiin massaseoksen lujuusominaisuuksia. Eriytetty rejektijauhatus voi kuitenkin parantaa prosessin hallittavuutta ja mahdollistaa tuotantotason noston. Päälinjan ajotavanmuutoskokeiden tulosten myötä voitiin havaita, että 300 t/d tuotantotaso tuotti kuidunpituuksiltaan, lujuuksiltaan ja tikkupitoisuuksiltaan parempaa massaa kuin 270 t/d tuotantotaso. Samaan aikaan tapahtunut bulkin lasku oli siedettävällä tasolla huomioitaessa vetolujuudessa tapahtuva parannus. Ajotavanmuutoskokeet osoittivat myös sen, että pienellä ensimmäisen ja toisen jauhatusvaiheen kuormitussuhteiden muutoksella on saavutettavissa parannusta sekä veto- että repäisylujuudessa, bulkissa tapahtuvien muutosten pysyessä siedettävällä tasolla. Tähän tulokseen päästiin löysäämällä ensimmäisen vaiheen jauhinten teräväliä kymmenyksellä ja vastaavasti tiukkaamalla toisen vaiheen jauhinten teräväliä niin, että jauhatuksen kokonaisenergianominaiskulutus pysyi vakiotasolla. Energiansäästöterien testauksessa havaittiin, että terien avulla on mahdollista säästää jauhatukseen kuluvassa energiassa noin 0,15 – 0,2 MWh/t. Saavutettavissa oleva energiansäästö ei kuitenkaan ole riittävä kompensoimaan massan laadun heikkenemistä, sillä energiansäästöterien myötä massan bulkki, kuidunpituus sekä veto- ja repäisylujuus laskivat verrattaessa niiden tasoon käytettäessä normaaliteriä.

LWC-paperin opasiteetin parantaminen

LWC-syväpainopaperilta vaaditaan hyvän ajettavuuden, kiillon ja sileyden ohella hyvää opasiteettia. Tämä on asettanut haasteita LWC-paperin valmistajille paperin neliömassojen laskiessa. Tässä diplomityössä etsittiin keinoja parantaa kevyiden LWC-syväpainolajien opasiteettia heikentämättä oleellisesti muita tärkeitä paperin ominaisuuksia. Tavoitteena oli nostaa CR48-lajin opasiteetti tavoitearvoon 90 %. Työn kirjallisuusosassa perehdyttiin paperin optisten ominaisuuksien teoriaan sekä raaka-aineisiin ja prosessin osiin, joilla on vaikutusta paperin opasiteettiin. Työn kokeellisessa osassa tutkittiin olemassa olevan aineiston perusteella tekijöitä, joilla uskottiin olevan vaikutusta CR48-lajin opasiteettiin. Tutkimuksen ja kirjallisuuden perusteella ajettiin tehdaskoeajoa, joiden avulla pyrittiin parantamaan paperin opasiteettia. CR48-lajin opasiteettitavoite saavutettiin kolmella eri tavalla. Opasiteettitavoite saavutettiin, kun paperin vaaleus säädettiin tavoitearvoon pigmenttivärin avulla tumman hierteen sijasta. Tällöin väripigmentin määrää päällystyspastassa nostettiin 0,01 osaa ja valkaistun hierteen osuus kokonaishierteen määrästä oli 100 %. Vaaleuden säätö pastavärillä oli käytännössä hidasta ja hankalaa. Opasiteettitavoite saavutettiin myös, kun hierre jauhettiin täysin koeterillä. Koeterillä tapahtuva jauhatus oli rajumpaa ja katkovampaa kuin perinteisillä terillä, joten hienoaineen lisääntyminen ja kuidun lyheneminen paransivat paperin opasiteettia, mutta lujuudet huononivat. Lisäksi tavoiteopasiteetti saavutettiin, kun sellun osuutta vähennettiin 8 %-yksikköä. Lujuuden säilymisen kannalta sellun vähennys oli parempi keino opasiteetin parantamiseksi kuin hierteen jauhaminen koeterillä. Koeajojen perusteella pohjapaperin tuhkapitoisuuden nostolla ja hierteen CSF-luvun alentamisella ei ollut vaikutusta paperin opasiteettiin. Lisäksi 100 %:nen koeterillä jauhettu sahahakehierre antoi paperille huonomman opasiteetin kuin hierre, josta puolet oli jauhettu koeterillä ja raaka-aineesta 25 % oli sahahaketta.

Hylynkäsittelyn ja annostelun vaikutus kartongin laatuun

Tämän työn tavoitteena oli löytää keinot taivekartongin riittävän z-suuntaisen lujuuden saavuttamiseksi tilanteessa, jossa runkokerrokseen annosteltavan hylyn määrää joudutaan pysyvästi vähentämään. Työn kirjallisuusosassa selvitettiin taivekartongin tärkeimmät ominaisuudet, joista tarkemmin tarkasteltiin palstautumislujuutta ja siihen vaikuttavia tekijöitä. Lisäksi käytiin läpi palstautumislujuuden mittausmenetelmät. Merkittävimpiä teoriaosassa käsiteltyjä palstautumislujuuteen vaikuttavia tekijöitä olivat massojen käsittely ja annostelu, kuivalujalisäaineiden käyttö sekä rainanmuodostus. Hylyn annosteluosuuden pienentäminen vähensi taivekartongin paksuussuuntaista lujuutta ja runkomassan vedenpoistovastusta, mutta samanaikaisesti lisääntyivät kartongin paksuus ja taivutusjäykkyys. Hylyn vähäisemmän käytön seurauksena menetettyä lujuutta ei pystytty palauttamaan hylyn jauhatuksen määrää lisäämällä, eikä kartonkikoneen runkoviiraosan vedenpoistoon vaikuttamalla. Kun hylyn annosteluosuus laskettiin 20 %:in, saavutettiin runkokerroksen riittävä lujuus ainoastaan runkomassan pääkomponenttina käytettävän hiokemassaseoksen jauhatusastetta nostamalla tai korvaamalla pieni osa hiokkeesta hyvin hienoksi jauhetulla mäntysellulla. Hiokkeen freeness oli laskettava tasolta 300 ml CSF tasolle 250 ml CSF. Vastaavasti mäntysellu oli jauhettava hyvin pitkälle (°SR 74) tai annosteluosuuden oli oltava vähintään 2 %, jolloin jauhatusaste °SR 49 oli riittävä. Vähäisemmällä hylyn käytöllä saavutettu etu vedenpoistossa saatettaisiin menettää näiden toimenpiteiden vaikutuksesta.

CFD simulation of complex phenomena containing suspensions and flow throughporous media

There is an increasing reliance on computers to solve complex engineering problems. This is because computers, in addition to supporting the development and implementation of adequate and clear models, can especially minimize the financial support required. The ability of computers to perform complex calculations at high speed has enabled the creation of highly complex systems to model real-world phenomena. The complexity of the fluid dynamics problem makes it difficult or impossible to solve equations of an object in a flow exactly. Approximate solutions can be obtained by construction and measurement of prototypes placed in a flow, or by use of a numerical simulation. Since usage of prototypes can be prohibitively time-consuming and expensive, many have turned to simulations to provide insight during the engineering process. In this case the simulation setup and parameters can be altered much more easily than one could with a real-world experiment. The objective of this research work is to develop numerical models for different suspensions (fiber suspensions, blood flow through microvessels and branching geometries, and magnetic fluids), and also fluid flow through porous media. The models will have merit as a scientific tool and will also have practical application in industries. Most of the numerical simulations were done by the commercial software, Fluent, and user defined functions were added to apply a multiscale method and magnetic field. The results from simulation of fiber suspension can elucidate the physics behind the break up of a fiber floc, opening the possibility for developing a meaningful numerical model of the fiber flow. The simulation of blood movement from an arteriole through a venule via a capillary showed that the model based on VOF can successfully predict the deformation and flow of RBCs in an arteriole. Furthermore, the result corresponds to the experimental observation illustrates that the RBC is deformed during the movement. The concluding remarks presented, provide a correct methodology and a mathematical and numerical framework for the simulation of blood flows in branching. Analysis of ferrofluids simulations indicate that the magnetic Soret effect can be even higher than the conventional one and its strength depends on the strength of magnetic field, confirmed experimentally by Völker and Odenbach. It was also shown that when a magnetic field is perpendicular to the temperature gradient, there will be additional increase in the heat transfer compared to the cases where the magnetic field is parallel to the temperature gradient. In addition, the statistical evaluation (Taguchi technique) on magnetic fluids showed that the temperature and initial concentration of the magnetic phase exert the maximum and minimum contribution to the thermodiffusion, respectively. In the simulation of flow through porous media, dimensionless pressure drop was studied at different Reynolds numbers, based on pore permeability and interstitial fluid velocity. The obtained results agreed well with the correlation of Macdonald et al. (1979) for the range of actual flow Reynolds studied. Furthermore, calculated results for the dispersion coefficients in the cylinder geometry were found to be in agreement with those of Seymour and Callaghan.

Mobile Subscription Acquisition and Retention Costs - An Actvity-Based Model

The objective of this master’s thesis was to develop a model for mobile subscription acquisition cost, SAC, and mobile subscription retention cost, SRC, by applying activity-based cost accounting principles. The thesis was conducted as a case study for a telecommunication company operating on the Finnish telecommunication market. In addition to activity-based cost accounting there were other theories studied and applied in order to establish a theory framework for this thesis. The concepts of acquisition and retention were explored in a broader context with the concepts of customer satisfaction, loyalty and profitability and eventually customer relationship management to understand the background and meaning of the theme of this thesis. The utilization of SAC and SRC information is discussed through the theories of decision making and activity-based management. Also, the present state and future needs of SAC and SRC information usage at the case company as well as the functions of the company were examined by interviewing some members of the company personnel. With the help of these theories and methods it was aimed at finding out both the theory-based and practical factors which affect the structure of the model. During the thesis study it was confirmed that the existing SAC and SRC model of the case company should be used as the basis in developing the activity-based model. As a result the indirect costs of the old model were transformed into activities and the direct costs were continued to be allocated directly to acquisition of new subscriptions and retention of old subscriptions. The refined model will enable managing the subscription acquisition, retention and the related costs better through the activity information. During the interviews it was found out that the SAC and SRC information is also used in performance measurement and operational and strategic planning. SAC and SRC are not fully absorbed costs and it was concluded that the model serves best as a source of indicative cost information. This thesis does not include calculating costs. Instead, the refined model together with both the theory-based and interview findings concerning the utilization of the information produced by the model will serve as a framework for the possible future development aiming at completing the model.

Assembly Methods of Permanent Magnets for Synchronous Generators

This thesis examines and explains the procedure used to redesign the attachment of permanent magnets to the surface of the rotor of a synchronous generator. The methodology followed to go from the actual assembly to converge to the final purposed innovation was based on the systematic approach design. This meant that first a series of steps had to be predefined as a frame of reference later to be used to compare and select proposals, and finally to obtain the innovation that was sought. Firstly, a series of patents was used as the background for the upcoming ideas. To this end, several different patented assemblies had been found and categorized according the main element onto which this thesis if focused, meaning the attachment element or method. After establishing the technological frame of reference, a brainstorm was performed to obtain as many ideas as possible. Then these ideas were classified, regardless of their degree of complexity or usability, since at this time the quantity of the ideas was the important issue. Subsequently, they were compared and evaluated from different points of view. The comparison and evaluation in this case was based on the use of a requirement list, which established the main needs that the design had to fulfill. Then the selection could be done by grading each idea in accordance with these requirements. In this way, one was able to obtain the idea or ideas that best fulfilled these requirements. Once all of the ideas were compared and evaluated, the best or most suitable idea or ideas were separated. Finally, the selected idea or ideas was/were analyzed in extension and a number of improvements were made. Consequently, a final idea was refined and made more suitable at its performance, manufacture, and life cycle assessment. Therefore, in the end, the design process gave a solution to the problem pointed out at the beginning.

Lautanauhaohjeen muodostus tavoitekuviosta geneettisellä algoritmilla

Lautanauhatekniikka on monipuolinen menetelmä esimerkiksi kuvioitujen nauhojen kutomiseen, mutta uusien kuvioaiheiden suunnittelu, tai aloittelijalle jo valmiiden ohjeettomien kuviomallien jäljittely, voi helposti käydä työlääksi menetelmän ominaispiirteiden johdosta. Tämän työn tavoitteena oli kehittää ohjelmallinen työkalu auttamaan näissä ongelmissa automatisoimalla kudontaohjeen etsintä käyttäjän laatimalle tavoitekuviolle. Ratkaisumenetelmän perustaksi valittiin geneettinen algoritmi, minkä johdosta työn keskeisintutkimusongelma oli kartoittaa algoritmin perusoperaatioiden parametrien ja tavoitekuvion kompleksisuuden keskinäisiä riippuvuuksia riittävästi toimivien arvosuositusten antamiseen ohjelman tulevassa käytännön käytössä. Työssä ei kehitetty sovellusalueeseen mukautettuja evoluutiooperaatioita, vaan keskityttiin luomaan hyvin tunnetuista elementeistä perusta, jota voi myöhemmin kehittää eteenpäin.

Development of Russian Ports in The Gulf of Finland

Russia has been one of the fastest developing economic areas in the world. Based on the GDP, the Russian economy grew evenly since the crisis in 1998 up till 2008. The growth in the gross domestic product has annually been some 5–10%. In 2007, the growth reached 8.1%, which is the highest figure after the 10% growth in 2000. Due to the growth of the economy and wage levels, purchasing power and consumption have been strongly increasing. The growing consumption has especially increased the imports of durables, such as passenger cars, domestic appliances and electronics. The Russian ports and infrastructure have not been able to satisfy the growing needs of exports and imports, which is why quite a large share of Russian foreign trade is going through third countries as transit transports. Finnish ports play a major role in transit transports to and from Russia. About 15% of the total value of Russian imports was transported through Finland in 2008. The economic recession that started in autumn 2008 and continues to date has had an impact on the economic development of Russia. The export income has decreased, mainly due to the reduced world market prices of energy products (oil and gas) and raw minerals. Investments have been postponed, getting credit is more difficult than before, and the ruble has weakened in relation to the euro and the dollar. The imports are decreasing remarkably, and are not forecast to reach the 2008 volumes even in 2012. The economic crisis is reflected in Finland's transit traffic. The volume of goods transported through Finland to and from Russia has decreased almost in the same proportion as the imports of goods to Russia. The biggest risk threatening the development of the Russian economy over long term is its dependence on export income from oil, gas, metals, minerals and forest products, as well as the trends of the world market prices of these products. Nevertheless, it is expected that the GDP of Russia will start to grow again in the forthcoming years due to the increased demand for energy products and raw minerals in the world. At the same time, it is obvious that the world market prices of these products will go up with the increasing demand. The increased income from exports will lead to a growth of imports, especially those of consumer goods, as the living standard of Russian citizens rises. The forecasts produced by the Russian Government concerning the economic development of Russia up till 2030 also indicate a shift in exported goods from raw materials to processed products, which together with energy products will become the main export goods of Russia. As a consequence, Russia may need export routes through third countries, which can be seen as an opportunity for increased transit transports through the ports of Finland. The ports competing with the ports of Finland for Russian foreign trade traffic are the Russian Baltic Sea ports and the ports of the Baltic countries. The strongest competitors are the Baltic Sea ports handling containers. On the Russian Baltic Sea, these ports include Saint Petersburg, Kaliningrad and, in the near future, the ports of Ust-Luga and possibly Vyborg. There are plans to develop Ust-Luga and Vyborg as modern container ports, which would become serious competitors to the Finnish ports. Russia is aiming to redirect as large a share as possible of foreign trade traffic to its own ports. The ports of Russia and the infrastructure associated with them are under constant development. On the other hand, the logistic capacity of Russia is not able to satisfy the continually growing needs of the Russian foreign trade. The capacity problem is emphasized by a structural incompatibility between the exports and imports in the Russian foreign trade. Russian exports can only use a small part of the containers brought in with imports. Problems are also caused by the difficult ice conditions and narrow waterways leading to the ports. It is predicted that Finland will maintain its position as a transit route for the Russian foreign trade, at least in the near future. The Russian foreign trade is increasing, and Russia will not be able to develop its ports in proportion with the increasing foreign trade. With the development of port capacity, cargo flows through the ports of Russia will grow. Structural changes in transit traffic are already visible. Firms are more and more relocating their production to Russia, for example as regards the assembly of cars and warehousing services. Simultaneously, an increasing part of transit cargoes are sent directly to Russia without unloading and reloading in Finland. New product groups have nevertheless been transported through Finland (textile products and tools), replacing the lost cargos. The global recession that started in autumn 2008 has influenced the volume of Russian imports and, consequently, the transit volumes of Finland, but the recession is not expected to be of long duration, and will thus only have a short-term impact on transit volumes. The Finnish infrastructure and services offered by the logistic chain should also be ready to react to the changes in imported product groups as well as to the change in Russian export products in the future. If the development plans of the Russian economy are realized, export products will be more refined, and the share of energy and raw material products will decrease. The other notable factor to be taken into consideration is the extremely fast-changing business environment in Russia. Operators in the logistic chain should be flexible enough to adapt to all kinds of changes to capitalise on business opportunities offered by the Russian foreign trade for the companies and for the transit volumes of Finnish ports, also in the future.

Evaluating the success of software development projects in Russia, Ukraine, and Belarus

The size and complexity of projects in the software development are growing very fast. At the same time, the proportion of successful projects is still quite low according to the previous research. Although almost every project's team knows main areas of responsibility which would help to finish project on time and on budget, this knowledge is rarely used in practice. So it is important to evaluate the success of existing software development projects and to suggest a method for evaluating success chances which can be used in the software development projects. The main aim of this study is to evaluate the success of projects in the selected geographical region (Russia-Ukraine-Belarus). The second aim is to compare existing models of success prediction and to determine their strengths and weaknesses. Research was done as an empirical study. A survey with structured forms and theme-based interviews were used as the data collection methods. The information gathering was done in two stages. At the first stage, project manager or someone with similar responsibilities answered the questions over Internet. At the second stage, the participant was interviewed; his or her answers were discussed and refined. It made possible to get accurate information about each project and to avoid errors. It was found out that there are many problems in the software development projects. These problems are widely known and were discussed in literature many times. The research showed that most of the projects have problems with schedule, requirements, architecture, quality, and budget. Comparison of two models of success prediction presented that The Standish Group overestimates problems in project. At the same time, McConnell's model can help to identify problems in time and avoid troubles in future. A framework for evaluating success chances in distributed projects was suggested. The framework is similar to The Standish Group model but it was customized for distributed projects.

Distortion properties of quasiconformal maps

In this Licentiate thesis we investigate the absolute ratio δ, j, ˜j and hyperbolic ρ metrics and their relations with each other. Various growth estimates are given for quasiconformal mpas both in plane and space. Some Hölder constants were refined with respect δ, j ˜j metrics. Some new results regarding the Hölder continuity of quasiconformal and quasiregular mapping of unit ball with respect to Euclidean and hyperbolic metrics are given, which were obtained by many authors in 1980’s. Applications are given to the study of metric space, quasiconformal and quasiregular maps in the plane and as well as in the space.

Pienen ICT-yrityksen kansainvälistymissuunnitelma

Pienen ICT-yrityksen kansainvälistymisoperaatioita suunnitellessa tulee huomioida käytössä olevat resurssit, kansainvälisten toimintojen aloittamiseen kuluva aika sekä sitoutumishalukkuus suhteutettuna riskeihin. Tämän diplomityön lähtökohtana oli määrittää kohdeyritykselle, ZapMeet Companylle, suunnitelma kansainvälistymisen aloittamiseksi. Tutkimuksessa selvitetään pk-yrityksille tyypillisiä kansainvälistymispolkuja, kansainvälistymisen operaatiomuotoja ja kohdemarkkinavalintoja sekä näihin vaikuttavia kriteerejä. Tutkimuksen ensimmäisessä vaiheessa analysoitiin ZapMeet Companyn nykytilanne ja selvitettiin kansainvälistymiseen vaadittavia toimenpiteitä. Tutkimuksen toisessa vaiheessa pureuduttiin kulttuurin ja operaatiomuotojen erityispiirteisiin valikoiduilla markkinoilla. Teoriakehys, markkinoiden erityispiirteet sekä asiantuntijoiden kommentit ja yrityksen resurssit huomioiden diplomityön perusteella muodostettiin suosituksia operaatiomuodon sekä ensimmäisen kohdemarkkinan valintaan. Lisäksi työssä otetaan kantaa vastuun jakoon, tuotteen sopeuttamiseen sekä yhteistyökumppanin valintaan.

First principles modeling of metallic alloys and alloy surfaces

By alloying metals with other materials, one can modify the metal’s characteristics or compose an alloy which has certain desired characteristics that no pure metal has. The field is vast and complex, and phenomena that govern the behaviour of alloys are numerous. Theories cannot penetrate such complexity, and the scope of experiments is also limited. This is why the relatively new field of ab initio computational methods has much to give to this field. With these methods, one can extend the understanding given by theories, predict how some systems might behave, and be able to obtain information that is not there to see in physical experiments. This thesis pursues to contribute to the collective knowledge of this field in the light of two cases. The first part examines the oxidation of Ag/Cu, namely, the adsorption dynamics and oxygen induced segregation of the surface. Our results demonstrate that the presence of Ag on the Cu(100) surface layer strongly inhibits dissociative adsorption. Our results also confirmed that surface reconstruction does happen, as experiments predicted. Our studies indicate that 0.25 ML of oxygen is enough for Ag to diffuse towards the bulk, under the copper oxide layer. The other part elucidates the complex interplay of various energy and entropy contributions to the phase stability of paramagnetic duplex steel alloys. We were able to produce a phase stability map from first principles, and it agrees with experiments rather well. Our results also show that entropy contributions play a very important role on defining the phase stability. This is, to the author’s knowledge, the first ab initio study upon this subject.