Profit at Risk as a Risk Management Tool in Deregulated Energy Markets

Euroopan energiamarkkinat ovat olleet viimeisen kymmenen vuoden aikana suurten muutosten alla. Markkinoiden kehitys on ollut huomattavaa myös Iso-Britanniassa, jossa sähkö- ja kaasumarkkinat ovat olleet avoinna kilpailulle jo muutamia vuosia. Ennen markkinoiden avautumista energiyhtiöt pystyivät siirtämään kaikki riskit suoraan asiakkaan kannettaviksi. Markkinoiden avautumisen myötä lisääntynyt kilpailu on kuitenkin pakottanut energiayhtiöitä ajanmukaistamaan näkemyksiään riskeistä. Riskitekijät, joista ei aiemmin tarvinnut välittää, on nyt pystyttävä tunnistamaan ja hallitsemaan. Tämä työ keskittyy hinta- ja volyymiriskien hallintaan. Rahoitusmarkkinoilla pitkään käytettyjä riskienhallintatyökaluja on otettu käyttöön myös energiamarkkinoilla. Energiamarkkinoiden piirteet poikkeavat kuitenkin rahoitusmarkkinoista, eikä näitä työkaluja voida ottaa käyttöön muutoksitta. Silti, jopa muutosten jälkeen rahoitusmarkkinoiden riskienhallitavälineet aliarvioivat energiamarkkinoiden hinta- ja volyymiriskejä. Tässä yhteydessä työssä esitetään Profit at Risk, PaR. PaR on skenaariopohjainen riskienhallinnan työkalu, joka on kehitetty erityisesti energiamarkkinoille ja täten huomioi niiden erikoispiirteet. Työn rungon muodostavat energiamarkkinoiden käyttäytyminen, hinta- ja volyymiriskitekijät sekä pohdinta miten hinta- ja volyymiriskeiltä voidaan suojautua ja miten niitä voidaan hallita. PaR-metodologiaa verrataan perinteisiin riskienhallintamenetelmiin ja työn tavoitteena on tuoda esiin ne tekijät, joiden ansiosta PaR on sopivampi työkalu energiamarkkinoiden riskienhallintaan kuin perinteiset menetelmät. Käytännön esimerkkinä työssä toimii Fortum Energy plus’n PaR –malli. Koska PaR on kehitetty erityisesti energiamarkkinoille, se huomioi täysin markkinoiden aiheuttamat hinta- ja volyymiriskit. Käytännön esimerkki kuitenkin osoittaa, että PaR menetelmästä ei ole riskienhallinnallista hyötyä ellei työkalun käyttäjällä ole täydellistä tietämystä niin energiamarkkinoista kuin markkinoiden muutoksiin vaikuttavien tekijöiden käyttäytymisestä.

Calculation analysis of energy saving tools for fan and pump applications

This thesis analyses the calculation of FanSave and PumpSave energy saving tools calculation. With these programs energy consumption of variable speed drive control for fans and pumps can be compared to other control methods. With FanSave centrifugal and axial fans can be examined and PumpSave deals with centrifugal pumps. By means of these programs also suitable frequency converter can be chosen from the ABB collection. Programs need as initial values information about the appliances like amount of flow and efficiencies. Operation time is important factor when calculating the annual energy consumption and information about it are the length and profile. Basic theory related to fans and pumps is introduced without more precise instructions for dimensioning. FanSave and PumpSave contain various methods for flow control. These control methods are introduced in the thesis based on their operational principles and suitability. Also squirrel cage motor and frequency converter are introduced because of their close involvement to fans and pumps. Second part of the thesis contains comparison between results of FanSave’s and PumpSave’s calculation and performance curve based calculation. Also laboratory tests were made with centrifugal and axial fan and also with centrifugal pump. With the results from this thesis the calculation of these programs can be adjusted to be more accurate and also some new features can be added.

Electric energy recovery system for a hydraulic forklift

This thesis studies the possibilities to recover energy in a hydraulic forklift system. Controlling of the system is done directly with an electric servo motor drive and a hydraulic pump. A real system was built and tested and simulations of the system were made with Matlab. Results of the system and simulations were analysed and compared and according to them, energy can be recovered efficiently from the hydraulic forklift system. Also new ideas and directions of further research were obtained with the help of this research.

Active Damping and Energy Recovery in a Hydraulic Boom Controlled by an Electric Drive

The aim of the study is to obtain a mathematical description for an alternative variant of controlling a hydraulic circuit with an electrical drive. The electrical and hydraulic systems are described by basic mathematical equations. The flexibilities of the load and boom is modeled with assumed mode method. The model is achieved and proven with simulations. The controller is constructed and proven to decrease oscillations and improve the dynamic response of the system.

Supplier Energy Audits in Thermal Power Plants

This master’s thesis handles an operating model for an electric equipment supplier conducted sale oriented energy audit for pumping, fan and other motor applications at power plants. The study goes through the largest factors affecting internal electricity use at a power plant, finds an energy audit –like approach for the basis of information gathering and presents the information needed for conducting the analysis. The model is tested in practice at a kraft recovery boiler of a chemical pulping mill. Targets chosen represent some of the largest electric motor applications in the boiler itself and in its fuel handling. The energy saving potential of the chosen targets is calculated by simulating the energy consumption of the alternatives for controlling the targets, and thereafter combining the information with the volume flow duration curve. Results of the research are somewhat divaricated, as all the information needed is not available in the automation system. Some of the targets could be simulated and their energy saving potential calculated quite easily. At some of the targets chosen the monitoring was not sufficient enough for this and additional measurements would have been needed to base the calculations on. In traditional energy audits, energy efficiency of pump and fan applications is not necessarily examined. This means that there are good possibilities for developing the now presented targeted energy audit procedure basis further.

Clean development mechanism and joint implementation in China and Russia as related to industrial energy projects

Being highly discussed the problem of climate change and global warming has been keeping importance for several of decades. As a response to the world’s need in solution for climate change disasters, the United Nations Framework Convention on Climate Change was adopted in 1992 and supplemented with the Kyoto protocol in 1997. This work is aimed to give better understanding of the Convention, Kyoto Protocol with its mechanisms and their function, related to energy projects in such case countries, as Russia and China, in order to assist evaluation of projects cost-effectiveness. It provides basic information about the Convention and the Protocol with their regulations, overview of present situation and future post-Kyoto forecasts, while the most attention is concentrated on the clean development mechanism and joint implementation step-by-step project cycles and specific regulations in given countries. The current study disclosed that CDM and JI project cycles are resulting in a complicated process. By the moment it requires step-by-step following of a number of methodologies, spending time and finance to particular project development. Uncertainties about post-Kyoto period bring additional risk to the projects and complicate any business decision concerning Kyoto Protocol.