Formation of polyelectrolyte multilayers and polyelectrolyte complexes in dual polymer treatment of papermaking pulp

The goal of this study was to find a new approach to modify chemically the properties of paper by improving fiber quality. This Master’s thesis includes the multiple polymer treatment in general and themeasurement methods with which the formation of multilayers and complexes can be noticed. The treatment by an oppositely charged dual polymer system is a good approach to increase paper strength. In this work, starch, a cationic polymer, and carboxymethyl cellulose (CMC), an anionic polymer, were used step-by-step to improve paper strength. The adsorption of cationic starch and CMC on cellulose fibers were analyzed via polyelectrolyte titration. The results showed that paper strength was enhanced slightly with a layer-by-layer assembly of the polymers. However, if the washing stage, which was required for layer-by-layer assembly, was eliminated, the starch/CMC complex was deposited on fibers more efficiently, and the paper strength was improved more significantly.

Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.

The Dual Role of HIF Hydroxylase PHD3 in Cancer Cell Survival

Most advanced tumours face periods of reduced oxygen availability i.e. hypoxia. During these periods tumour cells undergo adaptive changes enabling their survival under adverse conditions. In cancer hypoxia-induced cellular changes cause tumour progression, hinder cancer treatment and are indicative of poor prognosis. Within cells the main regulator of hypoxic responses is the hypoxia-inducible factor (HIF). HIF governs the expression of over a hundred hypoxia-inducible genes that regulate a number of cellular functions such as angiogenesis, glucose metabolism and cell migration. Therefore the activity of HIF must be tightly governed. HIF is regulated by a family of prolyl hydroxylase enzymes, PHDs, which mark HIF for destruction in normoxia. Under hypoxic conditions PHDs lose much of their enzymatic activity as they need molecular oxygen as a cofactor. Out of the three PHDs (PHD1, 2 and 3) PHD2 has been considered to be the main HIF-1 regulator in normoxic conditions. PHD3 on the other hand shows the most robust induction in response to oxygen deprivation and it has been implied as the main HIF-1 regulator under prolonged hypoxia. SQSTM1/p62 (p62) is an adaptor protein that functions through its binding motifs to bring together proteins in order to regulate signal transduction. In non-stressed situations p62 levels are kept low but its expression has been reported to be upregulated in many cancers. It has a definitive role as an autophagy receptor and as such it serves a key function in cancer cell survival decisions. In my thesis work I evaluated the significance of PHD3 in cancer cell and tumour biology. My results revealed that PHD3 has a dual role in cancer cell fate. First, I demonstrated that PHD3 forms subcellular protein aggregates in oxygenated carcinoma cells and that this aggregation promotes apoptosis induction in a subset of cancer cells. In these aggregates an adaptor protein SQSTM1/p62 interacts with PHD3 and in so doing regulates PHD3 expression. SQSTM1/p62 expression is needed to keep PHD3 levels low in normoxic conditions. Its levels rapidly decrease in response to hypoxia allowing PHD3 protein levels to be upregulated and the protein to be diffusely expressed throughout the cell. The interaction between PHD3 and SQSTM1/p62 limits the ability of PHD3 to function on its hydroxylation target protein HIF-1alpha. Second, the results indicate that when PHD3 is upregulated under hypoxia it protects cancer cells by allowing cell cycle to proceed from G1 to S-phase. My data demonstrates that PHD3 may either cause cell death or protect the cells depending on its expression pattern and the oxygen availability of tumours.

The purpose of consumer co-operation: implications for the management and governance of co-operatives

Extant research on consumer co-operation has acknowledged that the corporate purpose of consumer co-operatives deviates significantly from the purpose of investor-owned firms (IOFs – the dominant form in market economies and in theory development in the field of business economics) and also suggested that the management of consumer co-operatives differs from the management of IOFs. Despite this, there is a scarcity of research focusing on the management of consumer co-operatives in general and the ways this different purpose manifests in their management in particular. In other words, research on consumer cooperatives has only started to discover the importance of identifying the premises of these organizations and generating management and organization theories that take them into account. The overall objective of this study is to map out some of the implications that the purpose of consumer co-operation has for the management and governance of consumer co-operatives. To put it more precisely, by combining interview data gathered from Finnish consumer cooperatives (S Group, OP Bank Group and POP Bank) and extant literature, this study aims to generate or elaborate on definitions and outlines of the features that co-operative purpose poses for the strategic management, governance and managerial competence needed for consumer co-operatives. The study consists of two parts. The first part introduces the research topic, methods and publications, as well as discusses the overall outcomes. The second part consists of four publications that address the research questions from different viewpoints. The analyses of this study indicate that due to the purpose of consumer co-operation, the roles of locality and regionality become emphasized in their management. While locality and regionality are potential sources of competitive advantage for consumer co-operatives, geographic boundness sets significant boundary conditions for the strategic management of these organizations. Further, the purpose of consumer co-operation may pose several challenges to governance and set specific competence demands for the managers of these organizations. Associating the observations from various streams of research on management and governance with the purpose of consumer co-operation and examining these issues further, the thesis contributes to elaboration of theory in the field. While the thesis is by no means comprehensive (but instead reflects a co-operative research project in its early stages), it does shed light on some key ideas of management and governance and offers leads to theory and, thereby, will prove useful to elaborators, disseminators and appliers of knowledge on co-operation.

The accumulation of financial and social capital as a means to achieve a sustained competitive advantage for consumer co-operatives

By so far, scholars have discussed how the characteristics of consumer co-operatives (cooperative principles, values and the dual role of members as the users and owners) can potentially give them a competitive advantage over investor-owned firms (IOFs). In addition, concern for the community (as partly derived from locality and regionality) has been seen as a potential source of success for consumer co-operatives. On the other hand, the geographicbound purpose of consumer co-operation causes that consumer co-operative can be regarded as a challenging company form to manage. This is because, according to the purpose of consumer co-operation, co-operatives are obligated to 1) provide the owners with services and goods that are needed and do so at more affordable prices than their competitors do and/or 2) to operate in areas in which competitors do not want to operate (for example, because of the low profitability in certain area of business or region). Thus, consumer co-operatives have to operate very efficiently in order to execute this geographic-bound corporate purpose (e.g. they cannot withdraw from the competition during the declining stages of business). However, this efficiency cannot be achieved by any means; as the acceptance from the important regional stakeholders is the basic operational precondition and lifeline in the long run. Thereby, the central question for the survival and success of consumer co-operatives is; how should the consumer co-operatives execute its corporate purpose so it can be the best alternative to its members in the long run? This question has remained unanswered and lack empirical evidence in the previous studies on the strategic management of consumer cooperation. In more detail, scholars have not yet empirically investigated the question: How can consumer co-operatives use financial and social capital to achieve a sustained competitive advantage? It is this research gap that this doctoral dissertation aims to fulfil. This doctoral dissertation aims to answer the above questions by combining and utilizing interview data from S Group co-operatives and the central organizations in S Group´s network (overall, 33 interviews were gathered), archival material and 56 published media articles/reports. The study is based on a qualitative case study approach that is aimed at theory development, not theory verification (as the theory is considered as nascent in this field of study). Firstly, the findings of this study indicate that consumer co-operatives accumulate financial capital; 1) by making profit (to invest and grow) and 2) by utilizing a network-based organizational structure (local supply chain economies). As a result of financial capital accumulation, consumer co-operatives are able to achieve efficiency gains but also remain local. In addition, a strong financial capital base increases consumer co-operatives´ independence, competitiveness and their ability to participate in regional development (which is in accordance with their geographically bound corporate purpose). Secondly, consumer cooperatives accumulate social capital through informal networking (with important regional stakeholders), corporate social responsibility (CSR) behaviour and CSR reporting, pursuing common good, and interacting and identity sharing. As a result of social capital accumulation, consumer co-operatives are able to obtain the resources for managing; 1) institutional dependencies and 2) customer relations. By accumulating both social and financial capital through the above presented actions, consumer co-operatives are able to achieve sustained competitive advantage. Finally, this thesis provides useful ideas and new knowledge for cooperative managers concerning why and how consumer co-operatives should accumulate financial and social capital (to achieve sustained competitive advantage), while aligning with their corporate purpose.

Dual light barrier method for six degrees of freedom tool center point calibration of an industrial robot

Tool center point calibration is a known problem in industrial robotics. The major focus of academic research is to enhance the accuracy and repeatability of next generation robots. However, operators of currently available robots are working within the limits of the robot´s repeatability and require calibration methods suitable for these basic applications. This study was conducted in association with Stresstech Oy, which provides solutions for manufacturing quality control. Their sensor, based on the Barkhausen noise effect, requires accurate positioning. The accuracy requirement admits a tool center point calibration problem if measurements are executed with an industrial robot. Multiple possibilities are available in the market for automatic tool center point calibration. Manufacturers provide customized calibrators to most robot types and tools. With the handmade sensors and multiple robot types that Stresstech uses, this would require great deal of labor. This thesis introduces a calibration method that is suitable for all robots which have two digital input ports free. It functions with the traditional method of using a light barrier to detect the tool in the robot coordinate system. However, this method utilizes two parallel light barriers to simultaneously measure and detect the center axis of the tool. Rotations about two axes are defined with the center axis. The last rotation about the Z-axis is calculated for tools that have different width of X- and Y-axes. The results indicate that this method is suitable for calibrating the geometric tool center point of a Barkhausen noise sensor. In the repeatability tests, a standard deviation inside robot repeatability was acquired. The Barkhausen noise signal was also evaluated after recalibration and the results indicate correct calibration. However, future studies should be conducted using a more accurate manipulator, since the method employs the robot itself as a measuring device.

Naudanlanta biokaasulaitosraaka-aineena, käsittely ja logistiikka

Maatalouden lietelannasta saatavien ravinteiden talteenotto ja kierrätys ovat viime aikoina nousseet yhä tärkeämmäksi tavoitteeksi. Ravinteiden tehokas kierrätystapa saadaan ai-kaiseksi käsittelemällä lietelantaa. Lannan käsittelyketjuja on monenlaisia; tässä työssä naudan lannan käsittelyketju muodostuu separoinnista ja mädätyksestä. Tämän diplomityön tarkoituksena oli selvittää naudan lannan mekaanisen separoinnin ja logistiikan kannattavuus märkämädätys- ja kuivamädätyskäsittelyketjussa. Käsittelyketju-jen kannattavuus tai kannattamattomuus on esitetty eri skenaarioissa muodostettujen kus-tannuslaskentojen perusteella. Skenaarioiden kustannuslaskelmat ovat toisiinsa verratta-vissa, jolloin ne voidaan asettaa niin ikään paremmuusjärjestykseen. Viides skenaario ei ole suoraan verrattavissa muihin skenaarioihin, koska siinä lannankäsittelyketjua on tar-kasteltu eri näkökulmasta, keskittämällä suurimmalle maatilalle. Mekaanisista separaattoreista tarkasteltiin työssä ruuvipuristinta, dekantterilinkoa ja ul-koistettua separointipalvelua. Lannan logistiikkakustannuksissa huomioitiin lannan kulje-tusta traktori- ja säiliöautolla tai traktorilla. Separoinnin kustannus liitettiin osaksi logis-tiikkakustannusta. Työn tuloksien perusteella voidaan todeta dekantterilingon separointi-kustannuksen olevan taloudellisesti kannattamattomin johtuen pienestä lantakapasiteetista ja separaattorin korkeasta investointihinnasta. Ravinteiden osalta linko osoittautui tehok-kaimmaksi menetelmäksi erottamaan ravinteet eri jakeisiin. Lannan käsittely separointipalvelulla oli edullisin skenaario, jonka vuosittaiseksi kustan-nukseksi saatiin säiliö- ja kuorma-autolla lantaa kuljetettaessa 58 700 € ja traktorilla kul-jetettaessa 60 400 €. Kallein lannan käsittely oli dekantterilingolla, jonka vuosittaiseksi kustannukseksi saatiin lantaa säiliö- ja kuorma-autolla kuljetettaessa 121 000 € ja trakto-rilla kuljetettaessa 123 300 €. Lannan separointi maatilalla osoittautui kannattavammaksi kuin käsittelemättömän lietteen kuljetus biokaasulaitokselle.

Kraft recovery boilers – Principles and practice

This book was created as postgraduate lecture notes for Lappeenranta University of Technology's special course of steam power plants. But as with anything ever written the ideas shown have nurtured for a long time. Parts of these chapters have appeared elsewhere as individual papers or work documents. One of the most helpful episodes have been presentations and discussions during Pohto Operator training seminars. Input from those sessions can be seen in chapter firing. You who run recovery boilers, I salute you. The purpose of this text is to give the reader an overview of recovery boiler operation. Most parts of the recovery boiler operation are common to boilers burning other fuels. The furnace operation differs significantly from operation of other boiler furnaces. Oxygen rich atmosphere is needed to burn fuel efficiently. But the main function of recovery boiler is to reduce spent cooking chemicals. Reduction reactions happen best in oxygen deficient atmosphere. This dual, conflicting nature of recovery furnace makes understanding it so challenging. To understand the processes happening in the recovery furnace one must try to understand the detailed processes that might occur and their limitations. Therefore chapters on materials, corrosion and fouling have been added.

Vascular Healing after Coronary Stenting Evaluated by Optical Coherence Tomography

Optical coherence tomography (OCT) is a novel intracoronary imaging application for the assessment of native lesions and coronary stents. The purpose of this thesis was to evaluate the safety and feasibility of frequency-domain OCT (FD-OCT) based on experiences of the Satakunta Central Hospital (I). Early vascular healing was evaluated after implantation of endothelial progenitor cell capturing (II) and bio-active titanium-nitride-oxide coated stents (III) in two studies, each with 20 patients. Vascular healing was also compared after implantation of bio-active and everolimus-eluting stents on 28 patients after 9-month follow-up (IV). Long-term vascular healing of bio-active and paclitaxel-eluting stents was assessed in the last study with 18 patients (V). The results indicate that FD-OCT is safe and feasible (I). Both bio-active and endothelial progenitor cell capturing stents showed near-complete endothelialisation after one-month follow-up, which is desirable when prolonged dual anti-platelet therapy needs to be avoided after stenting (II and III). Endothelialisation of bio-active stents showed a predictable pattern at mid-term and long-term follow up (IV and V). Endothelialisation of everolimus-eluting stents was not complete at 9 months follow-up, which may suggest that interruption of dual antiplatelet therapy at this time point may not be safe (IV). Finally, delayed vascular healing may be present in patients treated with paclitaxel-eluting stents as long as 4 years from implantation, which reinforces the previously raised concerns on the long-term safety of this device (V).

Characterization of the filter media used in the dual media filter

The removal of organics from copper electrolyte solutions after solvent extraction by dual media filtration is one of the most efficient ways to ensure the clean electrolyte flow into the electrowinning. The clean electrolyte will ensure the good quality cathode plate production. Dual media filtration uses two layers of filter media for filtration as anthracite and garnet respectively. The anthracite layer will help the coalescing of the entrained organic droplets which will then float to the top of the filter, and back to the solvent extraction process. The garnet layer will catch any solids left in the electrolyte traveling through the filter media. This thesis will concentrate on characterization of five different anthracites in order to find some differences using specific surface area analysis, particle size analysis, and morphology analysis. These results are compared to the pressure loss values obtained from lab column tests and bed expansion behavior. The goal of the thesis was to find out if there were any differences in the anthracite which would make the one perform better than the other. There were no big differences found on any aspect of the particle characterization, but some found differences should be further studied in order to confirm the meaning of the porosity, surface area, intensity mean and intensity SD (Standard Deviation) on anthracites and their use in dual media filtration. The thesis work analyzed anthracite samples the way that is not found on any public literature sources, and further studies on the issue would bring more knowledge to the electrolyte process.

Performance improvement in mediterranean operations using risk management analysis : Case study of Containerships Group Ltd

Emerging markets of Northern Africa and Turkey provide growth opportunities for logistics service companies in the middle of low growth environment of European Union. The purpose of this research is to explore and analyze the risk factors in container shipping industry and third party logistics (3PL) services. The research empirically examined the risk factors, which are related within the interaction between these two parties in emerging markets of Mediterranean area. The previous studies have provided a valuable insight into the operational risks faced by container shipping industries. However, most of these studies have focused on one or several operational risk factors from a single point of view, and no studies have inclusively examined the possible operational risks faced in the container shipping industry from dual perspective of 3PL provider and its customers. A questionnaire has been deployed to collect related data; and the impacts of the risks were then be assessed and ranked using the method of risk mapping. Respondents were located in Turkey, Algeria, Tunisia, and Libya. Research presents the most important risk factors identified, and compares them between 3PL provider and its customers. The research also provide some risk mitigation strategies for the key risk factors, and tried to figure out a common risk picture, which guides the managers in both sides to have a better decisions and as a result, improve the performance of the container shipping operations. Challenge during project execution time was that customers identified vast amount of more risks than what was the case with logistics service operator.