Bisphosphonate Inhibition of Prostate Cancer Cell Invasion, Migration and Cytoskeletal Organization

Metastatic bone lesions are commonly associated with prostate cancer affecting approximately 60-80% of the patients. The progression of prostate cancer into an advanced stage is a complex process and its molecular mechanisms are poorly understood. So far, no curative treatment is available for advanced stages of prostate cancer. Bisphosphonates (BPs) are synthetic pyrophosphate analogues, which are used as therapeutics for various metabolic bone diseases because of their ability to inhibit osteoclastic bone resorption. Nitrogen-containing bisphosphonates block the function of osteoclasts by disturbing the vesicular traffic and the mevalonate pathway -related enzymes, for example farnesyl diphosphate synthase, which is involved in post-translational isoprenylation of small GTPases. In addition, the anti-proliferative, anti-invasive and pro-apoptotic effects of nitrogen-containing bisphosphonates on various cancer cell lines have been reported. The aim of this thesis work was to clarify the effects of bisphosphonates on prostate cancer cells, focusing on the mechanisms of adhesion, invasion and migration. Furthermore, the role of the mevalonate pathway and prenylation reactions in invasion and regulation of the cytoskeleton of prostate cancer cells were examined. Finally, the effects of alendronate on cytoskeleton- and actin-related proteins in prostate cancer cells were studied in vitro and in vivo. The results showed that the nitrogen-containing bisphosphonate alendronate inhibited the adhesion of prostate cancer cells to various extracellular matrix proteins and migration and invasion in vitro. Inhibition of invasion and migration was reversed by mevalonate pathway intermediates. The blockage of the prenylation transferases GGTase I and FTase inhibited the invasion, migration and actin organization of prostate cancer cells. The marked decrease of cofilin was observed by the prenylation inhibitors used. Inhibition of GGTase I also disrupted the regulation of focal adhesion kinase and paxillin. In addition, alendronate disrupted the cytoskeletal organization and decreased the level of cofilin in vitro and in vivo. The decrease of the cofilin level by alendronate could be one of the key mechanisms behind the observed inhibition of migration and invasion. Based on the effects of nitrogen-containing bisphosphonates on tumor cell invasion and cytoskeletal organization, they can be suggested to be developed as therapeutics for inhibiting prostate cancer metastasis.

Computational Evaluation of Print Unevenness According to Human Vision

Print quality and the printability of paper are very important attributes when modern printing applications are considered. In prints containing images, high print quality is a basic requirement. Tone unevenness and non uniform glossiness of printed products are the most disturbing factors influencing overall print quality. These defects are caused by non ideal interactions of paper, ink and printing devices in high speed printing processes. Since print quality is a perceptive characteristic, the measurement of unevenness according to human vision is a significant problem. In this thesis, the mottling phenomenon is studied. Mottling is a printing defect characterized by a spotty, non uniform appearance in solid printed areas. Print mottle is usually the result of uneven ink lay down or non uniform ink absorption across the paper surface, especially visible in mid tone imagery or areas of uniform color, such as solids and continuous tone screen builds. By using existing knowledge on visual perception and known methods to quantify print tone variation, a new method for print unevenness evaluation is introduced. The method is compared to previous results in the field and is supported by psychometric experiments. Pilot studies are made to estimate the effect of optical paper characteristics prior to printing, on the unevenness of the printed area after printing. Instrumental methods for print unevenness evaluation have been compared and the results of the comparison indicate that the proposed method produces better results in terms of visual evaluation correspondence. The method has been successfully implemented as ail industrial application and is proved to be a reliable substitute to visual expertise.

Katsastuksen teknisen laadun mittaaminen ja johtaminen

Suorituskyvyn mittaamisella on monia myönteisiä vaikutuksia koko organisaation toimintaan. Mittaamisen avulla toimintaa voidaan johtaa haluttuun suuntaan. Tutkimuksen tavoitteena oli tutkia, minkälainen suorituskykymittaristo tarvitaan katsastusyrityksen ylimmän johdon käyttöön, jotta katsastuksen teknisen laadun johtaminen mahdollistuisi. Tutkimuksen tarkoituksena oli rakentaa katsastuksen teknisen laadun suorituskykymittaristo ylimmälle johdolle. Katsastuksen tekninen laatu on keskeinen kysymys katsastusyritysten olemassaololle. Tekninen laatu on koko katsastustoiminnan perusta, jonka päälle liiketoiminta voidaan rakentaa. Ilman tätä perustaa ei ole jatkuvuutta liiketoiminnalle. Teknisen laadun mittaaminen ei kuitenkaan ole tällä hetkellä järjestelmällistä, eikä käytettävissä ole ollut tehtävään soveltuvaa mittaristoa. Tutkimuksessa käytettiin A-Katsastus Oy:n vuosien 2008–2011 aikana syntyneitä katsastustilastoja. Tilastollista prosessin valvonta-menetelmää (SPC) soveltamalla määritettiin toimipaikka- ja katsastajakohtaiset valvontarajat hylkäysprosenteille ja vikojen määrille. Valvontarajojen avulla rakennettiin katsastuksen teknisen laadun suorituskykymittaristo toimiala-, yritys-, toimipaikka- ja katsastajatasoille. Mittariston avulla voidaan asettaa tekniselle laadulle tavoitteet, seurata tavoitteiden toteumaa ja käynnistää tarvittaessa korjaavat toimenpiteet.

Generation and Characterization of Knockout Mice and Analysis of Patient Material Demonstrates a Role for Tissue Inhibitor of Metalloproteinases 4 (Timp4) in the Cardiovascular System and Tumor Metastasis

This thesis focuses on tissue inhibitor of metalloproteinases 4 (TIMP4) which is the newest member of a small gene and protein family of four closely related endogenous inhibitors of extracellular matrix (ECM) degrading enzymes. Existing data on TIMP4 suggested that it exhibits a more restricted expression pattern than the other TIMPs with high expression levels in heart, brain, ovary and skeletal muscle. These observations and the fact that the ECM is of special importance to provide the cardiovascular system with structural strength combined with elasticity and distensibility, prompted the present molecular biologic investigation on TIMP4. In the first part of the study the murine Timp4 gene was cloned and characterized in detail. The structure of murine Timp4 genomic locus resembles that in other species and of the other Timps. The highest Timp4 expression was detected in heart, ovary and brain. As the expression pattern of Timp4 gives only limited information about its role in physiology and pathology, Timp4 knockout mice were generated next. The analysis of Timp4 knockout mice revealed that Timp4 deficiency has no obvious effect on the development, growth or fertility of mice. Therefore, Timp4 deficient mice were challenged using available cardiovascular models, i.e. experimental cardiac pressure overload and myocardial infarction. In the former model, Timp4 deficiency was found to be compensated by Timp2 overexpression, whereas in the myocardial infarct model, Timp4 deficiency resulted in increased mortality due to increased susceptibility for cardiac rupture. In the wound healing model, Timp4 deficiency was shown to result in transient retardation of re-epithelialization of cutaneous wounds. Melanoma tumor growth was similar in Timp4 deficient and control mice. Despite of this, lung metastasis of melanoma cells was significantly increased in Timp4 null mice. In an attempt to translate the current findings to patient material, TIMP4 expression was studied in human specimens representing different inflammatory cardiovascular pathologies, i.e. giant cell arteritis, atherosclerotic coronary arteries and heart allografts exhibiting signs of chronic rejection. The results showed that cardiovascular expression of TIMP4 is elevated particularly in areas exhibiting inflammation. The results of the present studies suggest that TIMP4 has a special role in the regulation of tissue repair processes in the heart, and also in healing wounds and metastases. Furthermore, evidence is provided suggesting the usefulness of TIMP4 as a novel systemic marker for vascular inflammation.

Tutkimusretki Venäjän uusvanhaan sieluun

Kirjallisuusarvostelu

DIGITAL BUSINESS-TO-BUSINESS MARKETING COMMUNICATIONS IN EMERGING MARKETS – Developing Business Marketing in Russia

The core idea of this Master's Thesis was that five key characteristics – market heterogeneity, sociopolitical governance, chronic shortage of resources, unbranded competition, and inadequate infrastructure – of emerging markets are radically different from the traditional industrialized capitalist society and they will require us to rethink the core assumptions of business-to-business marketing, such as business relationships, marketing communication elements, and digitalization. In this research, Russia is considered to be an emerging market that reflects the aforementioned theoretical characteristics. The research was a qualitative case study and furthermore a collective case study. In the beginning three digital marketing professionals were interviewed to better understand digital B2B marketing. The actual research data was collected through seven structured theme interviews with representatives of the case companies operating in Russia. The selection of case companies included three business consulting companies and four industrial companies. The aim of this qualitative study was to understand and clarify how business marketing exploits digital marketing methods as a part of the chosen business marketing strategy under emerging markets’ special conditions. This objective was divided in three research questions: 1) How the chosen marketing strategy reflects in the business marketing process? 2) How digital marketing communication contributes to business marketing? 3) How are the emerging markets’ characteristics reflected in the business marketing process? The main research findings indicate that digital business-to-business marketing communications can be useful and effective. Moreover, business DMC can be defined and structured in a reasonable way. The company's prevalent marketing paradigm and the chosen marketing strategy reflect in the business marketing process, and in utilizing digital marketing communications. The assumption that emerging markets set an environment with special characteristics for business marketing was supported by the study. However, the business environmental aspects were not considerably disturbing digital B2B marketing, but making it even more reasonable to harness in Russia.

Nikkelin, koboltin, lyijyn ja sinkin selektiivinen erottaminen ioninleimaustekniikalla syntetisoiduilla kelatoivilla erotusmateriaaleilla

Kelatoivat erotusmateriaalit ovat osoittautuneet lupaaviksi haitallisten metallien erottamiseksi vedestä. Puhdistettava vesiliuos sisältää vain harvoin pelkästään erotettavaksi tarkoitettuja metallikationeja, sillä useimmiten mukana on erotusmateriaalien tehokkuutta heikentäviä kationeja. Parantamalla erotusmateriaalin selektiivisyyttä voitaisiin häiritsevien ionien vaikutusta vähentää selvästi. Kandidaatintyön tavoitteena oli tutkia ioninleimaustekniikan avulla syntetisoitujen kelatoivien erotusmateriaalien selektiivisyyttä nikkelille, koboltille, lyijylle ja sinkille. Käyttämällä esimerkiksi nikkelitemplaattia materiaalin synteesivaiheessa materiaalin nikkeliselektiivisyys kasvaa verrattuna perinteiseen synteesitekniikkaan. Tässä työssä tutkittiin erotusmateriaaleja, joissa oli käytetty nikkeli- tai lyijytemplaattia, vertaamalla niitä ilman templaattia syntetisoituihin materiaaleihin. Lisäksi erotustehokkuutta verrattiin kaupalliseen erotusmateriaaliin häiritsevien magnesium- ja kalsiumionien tapauksessa. Lyijyn havaittiin sitoutuvan tehokkaimmin kaikkiin syntetisoituihin materiaaleihin riippumatta nikkelitemplaatin käyttämisestä. Kinetiikkakokeet osoittivat lyijyn sitoutumisnopeudenkin olevan vertailtavista metalleista suurin. Kaikki kokeet suoritettiin huoneenlämpötilassa liuoksen pH-arvon ollessa 7,5. Nikkelitemplaatin käyttö lisäsi materiaalin selektiivisyyttä nikkelille verrattuna templaatittomaan muuten identtiseen materiaaliin. Kuitenkin materiaalien lyijyselektiivisyys oli huomattavasti nikkeliselektiivisyyttä suurempi. Lyijytemplaatin käyttö ei lisännyt lyijyselektiivisyyttä, mutta materiaalin nikkeliselektiivisyys parantui. Materiaaliin sitoutuneet nikkeli-, koboltti- ja sinkkipitoisuudet jäivät huomattavasti vähäisemmiksi verrattuna kaupalliseen materiaaliin. Magnesiumin ja kalsiumin tarttumista syntetisoituihin materiaaleihin tutkittiin myös ja tulosten mukaan IIPD2:een ja IIPD2-Methoxiin sitoutui erittäin vähän magnesiumia ja kalsiumia verrattuna kaupalliseen materiaaliin, jonka kalsiumkapasiteetti oli erityisen suuri. Kyseiset materiaalit soveltuvat tulosten perusteella myös häiritseviä ioneja sisältävien liuosten puhdistamiseen. Näin ollen valittujen kahden materiaalin jatkotutkimuksella olisi mahdollista parantaa nikkelikapasiteettia ja -selektiivisyyttä.

Repair of segmental bone defects with fiber-reinforced composite: a study of material development and an animal model on rabbits

The Repair of segmental defects in load-bearing long bones is a challenging task because of the diversity of the load affecting the area; axial, bending, shearing and torsional forces all come together to test the stability/integrity of the bone. The natural biomechanical requirements for bone restorative materials include strength to withstand heavy loads, and adaptivity to conform into a biological environment without disturbing or damaging it. Fiber-reinforced composite (FRC) materials have shown promise, as metals and ceramics have been too rigid, and polymers alone are lacking in strength which is needed for restoration. The versatility of the fiber-reinforced composites also allows tailoring of the composite to meet the multitude of bone properties in the skeleton. The attachment and incorporation of a bone substitute to bone has been advanced by different surface modification methods. Most often this is achieved by the creation of surface texture, which allows bone growth, onto the substitute, creating a mechanical interlocking. Another method is to alter the chemical properties of the surface to create bonding with the bone – for example with a hydroxyapatite (HA) or a bioactive glass (BG) coating. A novel fiber-reinforced composite implant material with a porous surface was developed for bone substitution purposes in load-bearing applications. The material’s biomechanical properties were tailored with unidirectional fiber reinforcement to match the strength of cortical bone. To advance bone growth onto the material, an optimal surface porosity was created by a dissolution process, and an addition of bioactive glass to the material was explored. The effects of dissolution and orientation of the fiber reinforcement were also evaluated for bone-bonding purposes. The Biological response to the implant material was evaluated in a cell culture study to assure the safety of the materials combined. To test the material’s properties in a clinical setting, an animal model was used. A critical-size bone defect in a rabbit’s tibia was used to test the material in a load-bearing application, with short- and long-term follow-up, and a histological evaluation of the incorporation to the host bone. The biomechanical results of the study showed that the material is durable and the tailoring of the properties can be reproduced reliably. The Biological response - ex vivo - to the created surface structure favours the attachment and growth of bone cells, with the additional benefit of bioactive glass appearing on the surface. No toxic reactions to possible agents leaching from the material could be detected in the cell culture study when compared to a nontoxic control material. The mechanical interlocking was enhanced - as expected - with the porosity, whereas the reinforcing fibers protruding from the surface of the implant gave additional strength when tested in a bone-bonding model. Animal experiments verified that the material is capable of withstanding load-bearing conditions in prolonged use without breaking of the material or creating stress shielding effects to the host bone. A Histological examination verified the enhanced incorporation to host bone with an abundance of bone growth onto and over the material. This was achieved with minimal tissue reactions to a foreign body. An FRC implant with surface porosity displays potential in the field of reconstructive surgery, especially regarding large bone defects with high demands on strength and shape retention in load-bearing areas or flat bones such as facial / cranial bones. The benefits of modifying the strength of the material and adjusting the surface properties with fiber reinforcement and bone-bonding additives to meet the requirements of different bone qualities are still to be fully discovered.

Effects of mineral sorting on concentrator design and economics

Ore sorting after crushing is an effective way to enhance the feed quality of a concentrator. Sorting by hand is the oldest way of concentrating minerals but it has become outdated because of low capacities. Older methods of sorting have also been difficult to use in large scale productions due to low capacities of sorters. Data transfer and processing and the speed of rejection mechanisms have been the bottlenecks for effective use of sorters. A fictive chalcopyrite ore body was created for this thesis. The properties of the ore were typical of chalcopyrite ores and economical limit was set for design. Concentrator capacity was determined by the size of ore body and the planned mine life. Two concentrator scenarios were compared, one with the sorting facility and the other without sorting. Comparison was made for quality and amount of feed, size of equipment and economics. Concentrator with sorting had lower investment and operational cost but also lower incomes due to the ore loss in sorting. Net cash flow, net present value and internal rate of interest were calculated for comparison of the two scenarios.

Tiedonhallinta verkostoituneessa logistiikkaketjussa – Case: VR-Yhtymä

Tiedon tehokas jakaminen ja tiedon hallinta näyttelee tärkeätä roolia yritysten kannattavuuden ja tehokkuuden kehittämisessä. Laadukkaan tiedon tehokas jakaminen ja omaksuminen korostuvat verkostoituneessa logistiikkaketjussa ja kolmannen osapuolen logistiikkaa harjoittavissa yrityksissä. Tehokkaalla tiedon jakamisella, tietämyksen hallinnalla sekä tietojohtamisen keinoilla voidaan luoda tehokkaita ja kilpailukykyisiä businessprosesseja. Työn tuloksena saavutettiin kuvaus tietojohtamisen eri näkökulmista sekä tietojohtamisesta tiedon hallinnan työkaluna. Työn teoreettisessa osuudessa käsitellään tietoa ja sen eri tasoja sekä perspektiivejä tietojohtamisessa käytettyinä syötteinä, sen prosesseina sekä lopputuloksena, joita tietojohtamisen käsitteen alla olevilla työkaluilla ja käytännöillä toteutetaan. Aiempi tutkimus osoittaa, että tietojohtaminen on yksi johtamisen malli, jonka avulla voidaan saavuttaa tehokkaan yritystoiminnan edellytykset sekä asetetut strategiset tavoit- teet. Kirjallisuuden perusteella pyrittiin kartoittamaan verkostoituneen logistiikkaketjun tiedonhallinnan esteet ja sitä rajoittavat tekijät. Työn empiirinen osuus toteutettiin kvalitatiivisena kysely- sekä haastattelututkimuksena, jonka avulla kerättiin työssä käytetty tutkimusaineisto. Työn empiirisessä osuudessa kartoitettiin kohdeorganisaation tiedonhallintaprosesseja sen kuljetustuotannon toiminnoissa, sekä niiden toteuttamista vaikeuttavia ja hidastavia tekijöitä. Empiirisen aineiston perusteella yritykselle ehdotettiin organisaation muokkaamista enemmän tiedon jakamista tu- kevaan suuntaan, joka voidaan teoriatiedon perusteella toteuttaa esimerkiksi luomalla fyysisiä ja henkisiä tiloja tietoprosessien toteuttamiselle.

Reverse osmosis membrane surface modification: effects on membrane performance

The aim of this thesis was to study the surface modification of reverse osmosis membranes by surfactants and the effect of modification on rejection and flux. The surfactants included anionic and nonionic surfactants. The purpose of membrane modification was to improve pure water permeability with increasing salt rejection. The literature part of the study deals with the basic principles of reverse osmosis technology and factors affecting the membrane performance. Also the membrane surface modification by surfactants and their influence on membrane’s surface properties and efficiency (permeability and salt rejection) were discussed. In the experimental part of the thesis two thin-film composite membranes, Desal AG and LE-4040, were modified on-line with three different surfactants. The effects of process parameters (pressure, pH, and surfactant concentration) on surface modification were also examined. The characteristics of the modified membranes were determined by measuring the membranes’ contact angle and zeta potentials. The zeta potential and contact angle measurements indicate that the surfactants were adsorbed onto the both membranes. However, the adsorption did not effect on membrane’s pure water permeability and salt rejection. Thereby, the surface modification of the Desal AG and LE-4040 membranes by surfactants was not able to improve the membrane’s performance.

Issuant views of hell in contemporary Anglo-American theology

This problem of hell is a specific form of the problem of evil that can be expressed in terms of a set of putatively incompatible statements: 1. An omnipotent God could create a world in which all moral agents freely choose life with God. 2. An omnibenevolent God would not create a world with the foreknowledge that some (perhaps a significant proportion) of God’s creatures would end up in hell. 3. An omniscient God would know which people will end up in hell. 4. Some people will end up forever in hell. Since the late twentieth century, a number of British and North American philosophical theologians, inspired by C.S. Lewis, have developed a new approach to answering the problem of hell. Very little work has been done to systematize this category of perspectives on the duration, quality, purpose and finality of hell. Indeed, there is no consensus among scholars as to what such an approach should be called. In this work, however, I call this perspective issuantism. Starting from the works of a wide range of issuantist scholars, I distill what I believe to be the essence of issuantist perspectives on hell: hell is a state that does not result in universal salvation and is characterized by the insistance that both heaven and hell must issue from the love of God, an affirmation of libertarian human freedom and a rejection of retributive interpretations of hell. These sine qua non characteristics form what I have labeled basic issuantism. I proceed to show that basic issuantism by itself does not provide an adequate answer to the problem of hell. The issuantist scholars themselves, however, recognize this weakness and add a wide range of possible supplements to their basic issuantism. Some of these supplemented versions of issuantism succeed in presenting reasonable answers to the problem of hell. One of the key reasons for the development of issuantist views of hell is a perceived failure on the part of conditionalists, universalists and defenders of hell as eternal conscious torment to give adequate answers to the problem of hell. It is my conclusion, however, that with the addition of some of the same supplements, versions of conditionalism and hell as eternal conscious torment can be advanced that succeed just as well in presenting answers to the problem of hell as those advanced by issuantists, thus rendering some of the issuantist critique of non-issuantist perspectives on hell unfounded.

Modulation of Signaling Molecules by Human Leucocyte Antigen B27; Special Reference to STAT1

Reactive arthritis (ReA) is an inflammatory joint disease, which belongs to the group of Spondyloarthritis (SpA). It may occur after infections with certain gram-negative bacteria such as Salmonella and Yersinia. SpAs are strongly associated with the human leucocyte antigen (HLA)-B27. Despite active research, the mechanism by which HLA-B27 causes disease susceptibility is still unknown. However, HLA-B27 has a tendency to misfold during assembly. It is possible that the misfolding of HLA-B27 could alter signaling pathways and/or molecules involved in inflammatory response in cells. We have earlier discovered that in HLA-B27-positive cells the interaction between the host and causative bacteria is disturbed. Our recent studies indicate that the expression of HLA-B27 may alter certain signaling molecules by disturbing their activation. The aim of this study was to investigate whether the expression of HLA-B27 disturbs the signaling molecules, especially the phosphorylation of transcription factor STAT1. STAT1 is an important mediator of inflammatory responses. Our results show that the phosphorylation of the STAT1 is significantly altered in HLA-B27-expressing U937 monocytic cells compared with control cells. STAT1 tyrosine 701 is more strongly phosphorylated in HLAB27- expressing cells; whereas the phosphorylation of STAT1 serine 727 is prolonged. Phosphorylation of STAT1 was discovered to be dependent on protein kinase PKR. Furthermore, we found out that the expression of posttranscriptional gene regulator HuR was altered in HLA-B27-expressing cells. We also detected that HLA-B27-positive cells secrete more interleukin 6, which is an important mediator of inflammation. These results help to understand how HLA-B27 may confer susceptibility to SpAs.

The multicultural moment : the history of the idea and politics of multiculturalism in Sweden in comparative, transnational and biographical context, 1964–1975

The emergence of the idea of multiculturalism in Swedish public discourse and social science in the latter half of the 1960s and introduction of official multiculturalism in 1975 constituted a major intellectual and political shift in the post-war history of Sweden. The ambition of the 1975 immigrant and minority policy to enable the preservation of ethno-cultural minorities and to create a positive attitude towards the new multicultural society among the majority population was also incorporated into Swedish cultural, educational and media policies. The rejection of assimilationism and the new commitment to ethno-cultural diversity, the multicultural moment, has earned Sweden a place on the list of the early adopters of official multiculturalism, together with Canada and Australia. This compilation thesis examines the origins and early post-war history of the idea of multiculturalism as well as the interplay between idea and politics in the shift from a public ideal of homogeneity to an ideal of multiculturalism in Sweden. It does so from a range of conceptual, comparative, transnational, and biographical perspectives. The thesis consists of an introduction (Part I) and four previously published studies (Part II). The primary research result of the thesis concerns the agency involved in the break-through and formal establishment of the idea of multiculturalism in Sweden. Actors such as ethnic activists, experts and officials were instrumental in the introduction and establishment of multiculturalism in Sweden, as they also had been in Canada and in Australia. These actors have, however, not previously been recognized and analysed as significant idea-makers and political agents in the case of Sweden. The intertwined connections between activists, social scientists, linguists, and officials facilitated the transfer of the idea of multiculturalism from a publically contested idea to public policy via the way of The Swedish Trade Union Confederation, academia and the Royal Commission of Immigration. The thesis furthermore shows that the political success of the idea of multiculturalism, such as it was within the limits of the universalist social democratic welfare state, was dependent on whom the claims-makers were, the status and positions they held, and the way the idea of multiculturalism was conceptualised and used. It was also dependent on the migratory context of labour immigration in the 1960s and 1970s and on whose behalf the advocates of multiculturalism made their claims. The majority of the labour immigrants were Finnish citizens from the former eastern half of the kingdom of Sweden who were net contributors to the Swedish welfare state. This facilitated the recognition of their ethno-cultural difference, and, following the logic of universalism, the ethno-cultural difference of other minority groups in Sweden. The historical significance of the multicultural moment is still evident in the contemporary immigration and integration policies of Sweden. The affirmation of diversity continues to set Sweden apart from the rest of Europe, now more so than in the 1970s, even though the migratory context has changed radically in the last 40 years.

Maximizing of water recovery in nanofiltration of mine process waters by using antiscalants

Reverse osmosis and nanofiltration are among the most effective and widely used desalination and water softening technologies. They can also be used to treat mining wastewaters and are capable of producing water of extremely high purity, regardless of the high concentrations of toxic heavy metals and extreme pH and salinity. However, challenges with recovering the salts and metals from mining wastewaters in exploitable form, as well as problems with scaling still limit the process efficiency and the ratio of purified water recoverable from process waters. To address the problem of membrane scaling caused by calcium sulfate, batch filtration experiments with the Desal-5 DL nanofiltration membrane, three commercial antiscalants and actual mine process water from a copper mine were performed. The aim of these experiments was to find process conditions where maximum water recovery would be achieved before significant scaling or irreversible membrane fouling would occur and to further improve water recovery by addition of antiscalants. Water recovery of 70 % was reached with the experimental setups by optimizing process conditions. PC-504T antiscaling agent was determined to be the most effective of the three antiscalants used and the addition of 5 ppm of PC-504T allowed the water recovery to be further increased from 70 % to 85 % before major scaling was observed. In these conditions 92 % calcium rejection was achieved.