The Role of a firm’s mindset in international success - case study of Finnish marine industry firms

This thesis investigates the influence of a firm’s mindset on international success in the context of the Finnish marine industry. The study draws theoretical wisdom from organisational behaviour and strategic management literatures. The research aim set for this study was to identify and categorise existing strategic types based on mindsets found in the marine industry SMEs, and to link the influence of mindsets with success by examining the role of mindsets in a firm’s performance. Mindsets of firms were conceptualised as aggregate collections of perceptions that influence how the surrounding environment is discerned by the members of the firm. Mindsets are idiosyncratic to firms and therefore important firm-specific resources which influence decision-making and can be observed through the strategic behaviour of firms. Qualitative case study method was applied which was further supported by quantitative data on the financial performance of the ten case firms. Taxonomy based on the dimension of mindsets and prediction was developed to demonstrate four ideal types of firms identified within the marine industry. It was found that all of the case firms emphasised adaptation in their strategy while planning was emphasised to a varying degree. Moreover, two different methods of adapting were found; proactive and reactive. Firms which plan in the long-term and adapt proactively constantly investigate whether their plans are synchronous with the realities of the market; by having an open mindset, a firm’s perception of the reality of the market is enabling the firm to develop value creating strategies which are superiorly informed.This finding was supported by the financial data and led to the proposition that having an open mindset and placing a high level of emphasis on prediction may have a positive influence on international success. Also, it was proposed that concentrating only on exploiting business opportunities in the present time and not exploring any addition opportunities can have a negative influence on the firm’s performance, even if the mindset of the firm is open.

Making the impact on research and society: a case study - open repository and crowdsourcing solutions developed for the Finno-Ugric Digitization Pilot Project at the National Library of Finland

Jussi-Pekka Hakkaraisen esitys 24. Kansainvälisessä tieteen-, teknologian ja lääketieteen historian kongressissa (24th International Congress of History of Science, Technology and Medicine) Manchesterissa 26.7.2013

Customer knowledge processing in maintenance business: case study

The purpose of the study is to examine and increase knowledge on customer knowledge processing in B2B context from sales perspective. Further objectives include identifying possible inhibiting and enabling factors in each phase of the process. The theoretical framework is based on customer knowledge management literature. The study is a qualitative study, in which the research method utilized is a case study. The empirical part was implemented in a case company by conducting in-depth interviews with the company’s value-selling champions located internationally. Context was maintenance business. Altogether 17 interviews were conducted. The empirical findings indicate that customer knowledge processing has not been clearly defined within the maintenance business line. Main inhibiting factors in acquiring customer knowledge are lack of time and vast amount of customer knowledge received. Enabling factors recognized are good customer relationships and sales representatives’ communication skills. Internal dissemination of knowledge is mainly inhibited by lack of time and restrictions in customer relationship management systems. Enabling factors are composition of the sales team and updated customer knowledge. Inhibiting utilization is lack of goals to utilize the customer knowledge and a low quality of the knowledge. Moreover, customer knowledge is not systematically updated nor analysed. Management of customer knowledge is based on the CRM system. As implications of the study, it is suggested for the case company to define customer knowledge processing in order to support maintenance business process.

Transfer pricing documentation differences in Finland and China - Case company study

This Master’s Thesis deals with the topic of transfer pricing documentation in Finland and China. The goal of the research is to find what kind of differences exist in a single case company’s transfer pricing documentation when following Chinese or Finnish transfer pricing regulations. The study is carried out as a case study research. The theoretical framework consists of information from different transfer pricing topics and transfer pricing documentation regulations in China and Finland. The main research material was the case company’s transfer pricing documents with the support of open discus-sion with one of the case company’s employees. The study compared the 2009 and 2010 documents. The 2009 document was done based on the Finnish method while the 2010 document was based on the Chinese documentation principles. The conclusion made is that the content of the documents was heavily similar, while the main differences come in the way the content is presented and the level of detail used in the documents.

Making the impact on research and society : a case study: crowdsourcing solutions developed for the linguistic research and citizen science

Can crowdsourcing solutions serve many masters? Can they be beneficial for both, for the layman or native speakers of minority languages on the one hand and serious linguistic research on the other? How did an infrastructure that was designed to support linguistics turn out to be a solution for raising awareness of native languages? Since 2012 the National Library of Finland has been developing the Digitisation Project for Kindred Languages, in which the key objective is to support a culture of openness and interaction in linguistic research, but also to promote crowdsourcing as a tool for participation of the language community in research. In the course of the project, over 1,200 monographs and nearly 111,000 pages of newspapers in Finno-Ugric languages will be digitised and made available in the Fenno-Ugrica digital collection. This material was published in the Soviet Union in the 1920s and 1930s, and users have had only sporadic access to the material. The publication of open-access and searchable materials from this period is a goldmine for researchers. Historians, social scientists and laymen with an interest in specific local publications can now find text materials pertinent to their studies. The linguistically-oriented population can also find writings to delight them: (1) lexical items specific to a given publication, and (2) orthographically-documented specifics of phonetics. In addition to the open access collection, we developed an open source code OCR editor that enables the editing of machine-encoded text for the benefit of linguistic research. This tool was necessary since these rare and peripheral prints often include already archaic characters, which are neglected by modern OCR software developers but belong to the historical context of kindred languages, and are thus an essential part of the linguistic heritage. When modelling the OCR editor, it was essential to consider both the needs of researchers and the capabilities of lay citizens, and to have them participate in the planning and execution of the project from the very beginning. By implementing the feedback iteratively from both groups, it was possible to transform the requested changes as tools for research that not only supported the work of linguistics but also encouraged the citizen scientists to face the challenge and work with the crowdsourcing tools for the benefit of research. This presentation will not only deal with the technical aspects, developments and achievements of the infrastructure but will highlight the way in which user groups, researchers and lay citizens were engaged in a process as an active and communicative group of users and how their contributions were made to mutual benefit.

Developing sustainable value proposition: A case study from manufacturing industry

Increasing pressures to reduce costs, inprove productivity, and lower the environmental impact are forcing suppliers to present evidences of the monetary and societal value they create for the customers and society around. The extant academic literature on the practical activities related to topic is still sparse and this study addresses the gap by developing sustainable customer value proposition for Valmet’s recycled fibre line solution for the Chinese market. The research is based on literature review and single case study method. Theoretically the study is connected to the emerging literature of customer value and life cycle engineering, and to the research of sustainable development in the field of marketing. For exloiting empirical evidences, in-depth supplier interviews and customer survey were conducted. The results suggest that selling of recycled fibre line solution requires tangible and credible evidence of the value and utility which is delivered for the customer. In addition to the economic benefits also societal benefits should be included in the value proposition that are the focus of attention in China. Still, the role of discovered benefits may be contradictory until they are communicated to appropriate decision makers. Managerially the study contributes to the customer value management and quantification knowledge and practices in Valmet’s organization.

Study of the advancement of innovations in communications industry. Case study: Russian Post Company

This study attempted to provide a project based on the already tested and successful results of foreign business which can help to contain the final price of innovation on desired levels. The research will attempt to dig out most of available information related to aforementioned definitions and thus completing theoretical background. Next author will explain used methodology and the process of evidence collection. After that the study will show the analysis of collected data in order to obtain results which are going to be compared with stated objectives in the final part. The conclusion of the research and proposed possibilities for additional work will be given in the last part. For this study author has chosen the qualitative model because it performs very well for analysis of small scale of data. The case study method was used because it gave author an opportunity to make an in-depth analysis of the collected information about particular organization so it became possible to analyze system's details in comparison. The results have been early considered valid and applicable to other studies. As the result thesis has proposed undertakings which reflect researches aimed on solving problems with provision of services and development of communications. In addition thesis has proposed formulation of database of postal service for Russian Post when (by request) customer possess an account where he or she can access postal services via PC or info table in postal office and order delivery of postal products which will be given private identification code. Project's payoff period has been calculated as well.

Improving reporting and internal control with process thinking - case study in a multinational corporation

The aim of this Master’s Thesis is to find applicable methods from process management literature for improving reporting and internal control in a multinational corporation. The method of analysis is qualitative and the research is conducted as a case study. Empirical data collection is carried out through interviews and participating observation. The theoretical framework is built around reporting and guidance between parent company and subsidiary, searching for means to improve them from process thinking and applicable frameworks. In the thesis, the process of intercompany reporting in the case company is modelled, and its weak points, risks, and development targets are identified. The framework of critical success factors in process improvement is utilized in assessing the development targets. Also internal control is analyzed with the tools of process thinking. As a result of this thesis, suggestions for actions improving the reporting process and internal control are made to the case company, the most essential of which are ensuring top management’s awareness and commitment to improvement, creating guidelines and tools for internal control and creating and implementing improved intercompany reporting process.

Development of Measurement Systems in Scientific Research: Case Study

In recent years, technological advancements in microelectronics and sensor technologies have revolutionized the field of electrical engineering. New manufacturing techniques have enabled a higher level of integration that has combined sensors and electronics into compact and inexpensive systems. Previously, the challenge in measurements was to understand the operation of the electronics and sensors, but this has now changed. Nowadays, the challenge in measurement instrumentation lies in mastering the whole system, not just the electronics. To address this issue, this doctoral dissertation studies whether it would be beneficial to consider a measurement system as a whole from the physical phenomena to the digital recording device, where each piece of the measurement system affects the system performance, rather than as a system consisting of small independent parts such as a sensor or an amplifier that could be designed separately. The objective of this doctoral dissertation is to describe in depth the development of the measurement system taking into account the challenges caused by the electrical and mechanical requirements and the measurement environment. The work is done as an empirical case study in two example applications that are both intended for scientific studies. The cases are a light sensitive biological sensor used in imaging and a gas electron multiplier detector for particle physics. The study showed that in these two cases there were a number of different parts of the measurement system that interacted with each other. Without considering these interactions, the reliability of the measurement may be compromised, which may lead to wrong conclusions about the measurement. For this reason it is beneficial to conceptualize the measurement system as a whole from the physical phenomena to the digital recording device where each piece of the measurement system affects the system performance. The results work as examples of how a measurement system can be successfully constructed to support a study of sensors and electronics.

Perceptions of corporate social responsibility: A case study of the perceived contents and outcomes

CSR has been subject of broad debate and research over the decades and has gained attention recently. The purpose of this thesis is to find out how companies perceive CSR. In addition this thesis is researching what is CSR in Finnish companies, how do companies measure CSR, what are the effects of CSR and how companies perceive those effects and what actors and factors support CSR. This research is a case study where altogether nine informants from seven companies were interviewed. This research is qualitative case study implemented with theme interviews. The analysis method is content analysis. Several interesting issues emerged from the empirical findings. CSR is playing pivotal role in companies values, vision and mission. CSR was perceived differently in companies but also mutual points emerged. The role of stakeholders is essential in CSR. In addition the communication with stakeholders was seen very important. Companies perceived that they can gain many benefits when acting responsibly for instance in issues related to cost reduction, reputation and personnel. However measuring these effects from CSR point of view was seen challenging. Other CSR related challenges are for example change and lack of resources. When considering empirical findings from a theoretical point of view, three interesting issues emerged. CSR reports play an important role in measuring and developing of CSR. However, this is not the case with all companies and some of them argued that reporting has too much attention nowadays when talking about CSR. The benefits of CSR are mostly related to responsive CSR. However maybe in a long-term follow-up strategic CSR related competitive advantage benefits could be more easily noticed. Many different issues supported CSR. Some issues are driven by outside of companies like NGO`s and media and some inside like the motivation of personnel and management. Vastuullista liiketoimintaa on tutkittu vuosien saatossa laajalti ja se on saanut viime vuosina erityisen paljon huomiota. Tämän pro gradu –tutkielman tavoitteena on selvittää, miten yritykset kokevat vastuullisen liiketoiminnan. Tämän lisäksi tutkimuksessa selvitetään, mitä vastuullinen liiketoiminta suomalaisissa yrityksissä tarkoittaa, miten yritykset mittaavat omaa vastuullisuuttaan, mitkä ovat vastuullisuuden vaikutukset, miten yritykset kokevat vastuullisuuden vaikutukset ja mitkä tekijät tukevat vastuullisen liiketoiminnan syntyä. Tutkimus toteutettiin haastattelemalla yhdeksää suomalaisen yrityksen yritysvastuusta vastaavaa tai sen kanssa työskentelevää henkilöä seitsemästä eri organisaatiosta loppuvuodesta 2014 ja alkuvuodesta 2015. Tutkimus on laadullinen, teemahaastatteluilla toteutettu haastattelututkimus. Aineisto on analysoitu teemoittain. Tutkimusaineiston perusteella vaikuttaa siltä, että vastuullinen liiketoiminta on tärkeässä roolissa yritysten arvoissa, visiossa ja missiossa. Yritysvastuu koettiin yrityksissä erilailla, mutta myös yhtäläisyyksiä on nähtävissä. Sidosryhmien rooli on erittäin tärkeä yritysvastuusta puhuttaessa ja myös kommunikointi sidosryhmien kanssa nousi tärkeäksi aiheeksi. Yritykset kokivat saavuttavansa monia hyötyjä vastuullisesta toiminnasta kuten kustannussäästöihin, maineeseen ja työntekijöihin liittyvissä asioissa. Näiden hyötyjen mittaaminen yritysvastuun näkökulmasta koettiin kuitenkin haasteelliseksi. Muita vastuullisuuteen liittyviä haasteita olivat esimerkiksi siihen liittyvä muutos sekä niukat resurssit. Tutkimuksen johtopäätöksistä nousi esille kolme merkittävää seikkaa. Vastuullisuusraportoinnin koettiin olevan hyödyllinen yritysvastuun mittaamisessa ja kehittämisessä. Kaikki yritykset eivät kuitenkaan olleet tätä mieltä ja osa koki raportoinnin saavan liian paljon huomiota nykypäivänä. Yritysten kokemat hyödyt vastuullisuuteen liittyen syntyivät pääosin reaktiivisesta vastuullisuudesta. Tässä kohdin on kuitenkin huomionarvoista mainita, että strategisen vastuullisuuden hyödyt olisivat saattaneet nousta paremmin esille pidemmän aikavälin tutkimuksessa. Yritysvastuun syntyä tukevia tekijöitä löytyi monia. Osa tekijöistä oli yrityksen ulkopuolisia kuten kansalaisjärjestöt ja media ja jotkut taas kumpusivat yrityksen sisältä esimerkiksi työntekijöiden ja johdon motivaatio.

SME internationalisation from an emerging market to a developed market : a case study from Ghana

This study focuses on understanding the internationalisation of small and medium-sized enterprises (SMEs) from an emerging market to a developed market. In particular, it examines the internationalisation process of a firm in the clothing and textile manufacturing industry in Ghana. Theoretically, the study is limited to the network internationalisation approach (e.g. Johanson & Mattsson, 1988; Johanson & Vahlne, 2009) and the industrial network approach (Håkansson & Snehota, 1995). Methodologically, a qualitative abductive case study approach is employed. The research process relies on a longitudinal method involving primary and secondary data and critical event analysis. Primary data has been collected from relevant informants at two different times in the internationalisation process. The research findings highlight the significance of both domestic and foreign business relationships in the internationalisation of an SME from an emerging African market to a developed country market. They show the greater importance of exogenous critical events than has been found in the research regarding firms in developed countries. Institutional actors were essential in the network and as sources of exogenous critical events. In addition, the successful SME should possess unique resources in the form of an entrepreneurial spirit, sufficient knowledge of internationalisation, and specific product knowledge. Theoretically, the present study contributes to business network research through providing an understanding of the process of developing network relationships and their impact in an African context. By focusing on SMEs, a contribution has been made in relation to the advancement of SME research. This research reveals empirical insight into SME internationalisation in a setting where an SME is internationalising to a developed country market from a newly emerging African market. Methodologically, the study provides an example of longitudinal research based on abductive methodology. The results provide implications for firms, managers, and policy-makers within the industry, especially on how to manage and use network relationships to promote SME internationalisation from newly emerging markets.

Optimization of Transportation System by Tailored Logistics Network: A Case Study in Automotive Industry

This thesis aims to redesign the supply chain system in an automotive industry in order to obtain space reduction in the inventory by using tailored logistics network. The redesigning process by tailored supply chain will combine all possible shipment methods including direct shipment, milk-run, milk-run via distribution center and Kanban delivery. The current supply chain system in Nissan goes rather well when the production volume is in moderate level. However, when the production volume is high, there is a capacity problem in the warehouse to accommodate all delivered parts from suppliers. Hence, the optimization of supply chain system is needed in order to obtain efficient logistics process and effective inventory consumption. The study will use primary data for both qualitative and quantitative approach as the research methods. Qualitative data will be collected by conducting interviews with people related to procurement and inventory control. Quantitative data consists of list of suppliers with their condition in several parameters which will be evaluated and analyzed by using scoring method to assign the most suitable transportation network to each suppliers for improvement of inventory reduction in a cost efficient manner.

Performance improvement in mediterranean operations using risk management analysis : Case study of Containerships Group Ltd

Emerging markets of Northern Africa and Turkey provide growth opportunities for logistics service companies in the middle of low growth environment of European Union. The purpose of this research is to explore and analyze the risk factors in container shipping industry and third party logistics (3PL) services. The research empirically examined the risk factors, which are related within the interaction between these two parties in emerging markets of Mediterranean area. The previous studies have provided a valuable insight into the operational risks faced by container shipping industries. However, most of these studies have focused on one or several operational risk factors from a single point of view, and no studies have inclusively examined the possible operational risks faced in the container shipping industry from dual perspective of 3PL provider and its customers. A questionnaire has been deployed to collect related data; and the impacts of the risks were then be assessed and ranked using the method of risk mapping. Respondents were located in Turkey, Algeria, Tunisia, and Libya. Research presents the most important risk factors identified, and compares them between 3PL provider and its customers. The research also provide some risk mitigation strategies for the key risk factors, and tried to figure out a common risk picture, which guides the managers in both sides to have a better decisions and as a result, improve the performance of the container shipping operations. Challenge during project execution time was that customers identified vast amount of more risks than what was the case with logistics service operator.

Digital Content Marketing in the Business-to-Business Context. A Case Study on Marketing Communications Agencies.

Marketing has changed because of digitalization. Marketing is moving towards digital channels and more companies are transitioning from “pushing” advertising messages to “pull” marketing, that attracts audience with the content that interests and benefits the audience. This kind of marketing is called content marketing or “inbound” marketing. This study focuses on how marketing communications agencies utilize digital content marketing and what are the best practices with the selected digital content marketing channels. In this study, those channels include blogs, Facebook, Twitter, and LinkedIn. The qualitative research method was utilized in order to examine the phenomenon of digital content marketing in-depth. The chosen data collecting method was semi-structured interviewing. A total of seven marketing communications agencies, who currently utilize digital content marketing, were selected as case companies and interviewed. All the case companies are from the marketing communications industry because that industry can be assumed to be well adapted to digital content marketing techniques. There is a research gap about digital content marketing in the B2B context, which increases the novelty value of this research. The study examines what is digital content marketing, why B2B companies use digital content marketing, and how should digital content marketing be conducted through blogs and social media. The informants perceived digital marketing to be a fundamental part of their all marketing. They conduct digital content marketing for the following reasons: to increase sales, to improve their brand image and to demonstrate their own skills. Concrete results of digital content marketing for the case companies include sales leads, new clients, better brand image, and that recruiting is easier. The most important success factors with blogs and social media are the following: 1) Audience-centric thinking. All content planning should start from figuring out which themes interests the target audience. Social media channel choices should be based on where the target audience can be reached. 2) Companies should not talk only about themselves. Instead, content is made about themes that interests the target audience. On social media channels, only a fragment of all shared content is about the company. Rather, most of the shared content is industry-specific content that helps the potential client.