Animals in an Urban Context. A Zooarchaeological study of the Medieval and Post-Medieval town of Turku

The aim of this study is to explore the role and importance of different animal species in Turku through an analysis of osteological data and documentary evidence. The osteological material used in this study is derived from two town plots in Turku dating from the 13th century to the 19th century. The osteological material deposited in Turku represents animals bred both in the town and in the surrounding landscape. Animal husbandry in SW-Finland can also be examined through a number of historical documents. The importance of animals in Turku and its hinterland are closely connected and therefore the roles of the animals in both urban and rural settings are examined. The study has revealed the complexity of the depositional patterns in medieval and post-medieval Turku. In the different areas of Turku, characteristic patterns in the osteological material and different deposit types were evident. These patterns are reflections of the activities and therefore of the lifestyles practiced in Turku. The results emphasise the importance of context- awareness in the study of material culture from archaeological sites. Both the zooarchaeological and historical sources indicate that cattle were important in animal husbandry in Turku from the Middle Ages up to the 19th century. Sheep were the second most common species. When taking into consideration the larger size of cattle, the dominance of these animals when it come to meat consumption seems clear even in those phases where sheep bones are more abundant. Pig is less abundant in the material than either cattle or sheep and their importance for subsistence was probably fairly modest, albeit constant. Goats were not abundant in the material. Most of the identified goat bones came from low utility body parts (e.g. skulls and lower extremities), but some amount of goat meat was also consumed. Wild species were of minor importance when it came to consumption practices in Turku. The changes in Turku’s animal husbandry patterns between the medieval and post medieval periods is reflected in the change in age of the animals slaughtered, which was part of a wider pattern seen in North- and Central Europe. More mature animals are also present in the assemblages. This pattern is related to the more pronounced importance of cattle as a manure producer and a draught animal as a result of the intensification of crop cultivation. This change seems to occur later in Finland than in the more Southerly regions, and indeed it did not necessarily take hold in all parts of the country.

Sustainability of palm oil production and opportunities for Finnish technology and know-how transfer

The global demand for palm oil is growing, thus prompting an increase in the global production particularly in Malaysia and Indonesia. Such increasing demand for palm oil is due to palm oil’s relatively cheap price and versatile advantage both in edible and non-edible applications. Along with the increasing demand for palm oil, particularly for the production of biofuel, is a heated debate on its sustainability. Ecological degradation, climate change and social issues are among the main sustainability issues pressing the whole palm oil industry today. Clean Development Mechanism (CDM) projects fulfilling the imperatives of the Kyoto Protocol are starting to gain momentum in Malaysia as reflected by the increasing registration of CDM projects in the palm oil mills. Most CDM projects in palm oil mills are on waste-to-energy, cocomposting, and methane recovery with the latter being the most common. The study on greenhouse gases (GHG) in the milling process points that biogas collection and energy utilisation has the greatest positive effect on GHG balance. On the other hand, empty fruit bunches (EFB) end-use as energy and high energy efficiency of the mill have the least effect on GHG balance of the mill. The range of direct GHG emissions from the palm oil mill is from 2.5 to 27 gCO2e/MJCPO, while the range of GHG emissions with all indirect and avoided emissions included is from -9 to 29 gCO2e/MJCPO. Comparing this GHG balance result with that of the EU RES-Directive suggests a further check on the values and emissions consideration of the latter.

Methods for assessing the sustainability of integrated municipal waste management and

The general striving to bring down the number of municipal landfills and to increase the reuse and recycling of waste-derived materials across the EU supports the debates concerning the feasibility and rationality of waste management systems. Substantial decrease in the volume and mass of landfill-disposed waste flows can be achieved by directing suitable waste fractions to energy recovery. Global fossil energy supplies are becoming more and more valuable and expensive energy sources for the mankind, and efforts to save fossil fuels have been made. Waste-derived fuels offer one potential partial solution to two different problems. First, waste that cannot be feasibly re-used or recycled is utilized in the energy conversion process according to EU’s Waste Hierarchy. Second, fossil fuels can be saved for other purposes than energy, mainly as transport fuels. This thesis presents the principles of assessing the most sustainable system solution for an integrated municipal waste management and energy system. The assessment process includes: · formation of a SISMan (Simple Integrated System Management) model of an integrated system including mass, energy and financial flows, and · formation of a MEFLO (Mass, Energy, Financial, Legislational, Other decisionsupport data) decision matrix according to the selected decision criteria, including essential and optional decision criteria. The methods are described and theoretical examples of the utilization of the methods are presented in the thesis. The assessment process involves the selection of different system alternatives (process alternatives for treatment of different waste fractions) and comparison between the alternatives. The first of the two novelty values of the utilization of the presented methods is the perspective selected for the formation of the SISMan model. Normally waste management and energy systems are operated separately according to the targets and principles set for each system. In the thesis the waste management and energy supply systems are considered as one larger integrated system with one primary target of serving the customers, i.e. citizens, as efficiently as possible in the spirit of sustainable development, including the following requirements: · reasonable overall costs, including waste management costs and energy costs; · minimum environmental burdens caused by the integrated waste management and energy system, taking into account the requirement above; and · social acceptance of the selected waste treatment and energy production methods. The integrated waste management and energy system is described by forming a SISMan model including three different flows of the system: energy, mass and financial flows. By defining the three types of flows for an integrated system, the selected factor results needed in the decision-making process of the selection of waste management treatment processes for different waste fractions can be calculated. The model and its results form a transparent description of the integrated system under discussion. The MEFLO decision matrix has been formed from the results of the SISMan model, combined with additional data, including e.g. environmental restrictions and regional aspects. System alternatives which do not meet the requirements set by legislation can be deleted from the comparisons before any closer numerical considerations. The second novelty value of this thesis is the three-level ranking method for combining the factor results of the MEFLO decision matrix. As a result of the MEFLO decision matrix, a transparent ranking of different system alternatives, including selection of treatment processes for different waste fractions, is achieved. SISMan and MEFLO are methods meant to be utilized in municipal decision-making processes concerning waste management and energy supply as simple, transparent and easyto- understand tools. The methods can be utilized in the assessment of existing systems, and particularly in the planning processes of future regional integrated systems. The principles of SISMan and MEFLO can be utilized also in other environments, where synergies of integrating two (or more) systems can be obtained. The SISMan flow model and the MEFLO decision matrix can be formed with or without any applicable commercial or free-of-charge tool/software. SISMan and MEFLO are not bound to any libraries or data-bases including process information, such as different emission data libraries utilized in life cycle assessments.

Mining in Developing Countries: A Case Study of Sustainability Challenges

Mining has severe impacts on its surrounding. Particularly in the developing countries it has degraded the environment and signigicantly altered the socio-economical dynamics of the hosts. Especially relocation disrupts people from their homes, livelihoods, cultures and social activities. Mining industry has failed to develop the local host and streghten its governance structures; instead it has further degraded the development of mineral rich third world countries, which are among the world poorest ones. Cash flows derived from mining companies have not benefitted the crass-root level that however, bears most of the detrimental impacts. Especially if the governance structure of the host is weak, the sudden wealth is likely to accelerate disparities, corruption and even fuel wars. Environmental degradation, miscommunication, mistrust and disputes over land use have created conflicts between the communities and a mining company in Obuasi, Ghana; a case study of this thesis. The disputes are deeply rooted and further fuelled by unrealistic expectations and broken promises. The relations with artisanal and illegal miners have been especially troublesome. Illegal activities, mainly encroachment of the land and assets of the mine, such as vandalising tailings pipes have resulted in profits losses, environmental degradation and security hazards. All challenges mentioned above have to be addressed locally with site-specific solutions. It is vital to increase two-way communication, initiate collaboration and build capacity of the stakeholders such as local communities, NGOs and governance authorities. The locals must be engaged to create livelihood opportunities that are designed with and for them. Capacity can also be strengthened through education and skills training, such as women’s literacy programs. In order to diminish the overdependence of locals to the mine, the activities have to be self -sufficient and able to survive without external financial and managerial inputs. Additionally adequate and fair compensation practises and dispute resolution methods that are understood and accepted by all parties have to be agreed on as early as possible.

Biogeochemistry in acid sulphate soil landscapes and small urban centres in Western Finland

The overall purpose of this thesis was to increase the knowledge on the biogeochemistry of rural acid sulphate (AS) soil environments and urban forest ecosystems near small towns in Western Finland. In addition, the potential causal relationship between the distribution of AS soils and geographical occurence of multiple sclerosis (MS) disease was assessed based on a review of existing literature and data. Acid sulphate soils, which occupy an area of approximately 17–24 million hectare worldwide, are regarded as the nastiest soils in the world. Independent of the geographical locality of these soils, they pose a great threat to their surrounding environment if disturbed. The abundant metal-rich acid drainage from Finnish AS soils, which is a result of sulphide oxidation due to artificial farmland drainage, has significant but spatially and temporally variable ecotoxicological impacts on biodiversity and community structure of fish, benthic invertebrates and macrophytes. This has resulted in mass fish kills and even eradication of sensitive fish species in affected waters. Moreover, previous investigations demonstrated significantly enriched concentrations of Co, Ni, Mn and Al, metals which are abundantly mobilised in AS soils, in agricultural crops (timothy grass and oats) and approximately 50 times higher concentrations of Al in cow milk originating from AS soils in Western Finland. Nevertheless, the results presented here demonstrate, in general, relatively moderate metal concentrations in oats and cabbage grown on AS soils in Western Finland, although some of the studied fields showed anomalous values of metals (e.g. Co and Ni) in both the soil and target plants (especially oats), similar to that of the previous investigations. The results indicated that the concentrations of Co, Ni, Mn and Zn in oats and Co and Zn in cabbage were governed by soil geochemistry as these metals were correlated with corresponding concentrations extracted from the soil by NH4Ac-EDTA and NH4Ac, respectively. The concentrations of Cu and Fe in oats and cabbage were uncorrelated to that of the easily soluble concentrations in the soils, suggesting that biological processes (e.g. plant-root processes) overshadow geochemical variation. The concentrations of K and Mg in cabbage, which showed a low spread and were strongly correlated to the NH4Ac extractable contents in the soil, were governed by both the bioavailable fractions in the topsoil and plant-uptake mechanisms. The plant´s ability to regulate its uptake of Ca and P (e.g. through root exudates) seemed to be more important than the influence of soil geochemistry. The distribution of P, K, Ca, Mg, Mn and S within humus, moss and needles in and around small towns was to a high degree controlled by biological cycling, which was indicated by the low correlation coefficients for P, K, Ca, Mg and S between humus and moss, and the low spread of these nutrients in moss and needles. The concentration variations of elements in till are mainly due to natural processes (e.g. intrusions, weathering, mineralogical variations in the bedrock). There was a strong spatial pattern for B in humus, moss and needles, which was suggested to be associated with anthropogenic emissions from nearby town centres. Geogenic dust affected the spatial distribution of Fe and Cr in moss, while natural processes governed the Fe anomaly found in the needles. The spatial accumulation patterns of Zn, Cd, Cu, Ni and Pb in humus and moss were strong and diverse, and related to current industry, the former steel industry, coal combustion, and natural geochemical processes. An intriguing Cu anomaly was found in moss. Since it was located close to a main railway line and because the railway line´s electric cables are made of Cu, it was suggested that the reason for the Cu anomaly is corrosion of these cables. In Western Finland, where AS soils are particularly abundant and enrich the metal concentrations of stream waters, cow milk and to some extent crops, an environmental risk assessment would be motivated to elucidate if the metal dispersion affect human health. Within this context, a topic of concern is the distribution of multiple sclerosis as high MS prevalence rates are found in the main area of AS soils. Regionally, the AS soil type in the Seinäjoki area has been demonstrated to be very severe in terms of metal leaching, this area also shows one of the highest MS rates reported worldwide. On a local scale, these severe AS soil types coincide well with the corresponding MS clustering along the Kyrönjoki River in Seinäjoki. There are reasons to suspect that these spatial correlations are causal, as multiple sclerosis has been suggested to result from a combination of genetic and environmental factors.

Regional innovation strategies and sustainability in selected EU countries

This study focuses on regional innovation strategy (RIS) and sustainability aspects in selected regions of European Union (EU) countries. It is known that RIS helps a region to innovate locally and to compete globally and it is considered as one of the main policy tools of the EU for innovation support at a regional level. This study is conducted to explore the existence and adoption of RIS in different regions of selected EU countries, and to highlight and compare regional RIS characteristics. The study is also aimed at identifying the factors that characterise the formulation and implementation of RIS as well as the problems associated thereof. In this study, six regions of EU countries are considered: Päijät-Häme Region (Finland); London Region (United Kingdom); Mid-West Region (Ireland); Veneto Region (Italy); Eastern Region (Poland); and West Region (Romania). Data and information are collected by sending questionnaires to the respective regional authorities of these selected regions. Based on the gathered information and analysis, RIS or equivalent strategy document serves as a blueprint for forwarding innovative programmes towards regional sustainability. The objectives of RIS in these regions are found to be dependent on the priority sectors and state of the region’s development. The current environmental sustainability aspects are focused on eco-design, eco-products, and eco-innovation, although each region also has its own specific aspects supported by RIS. Likewise, regional policies typically follow the RIS yet translated in various sectoral focus or priority areas. The main enhancing factors supporting RIS among selected regions have some similarities and variations; among others, some regions are strongly supported by EU while others have support from own regional agencies, organisations and professional networks. RIS implementation is not without challenges and despite the differences in challenges, almost all of reviewed regions consider financial resource as a common problem. Generally, it is learned from this study that RIS and regional sustainability are reinforcing each other mutually. In this study, the strong focus is given towards environmental sustainability in the regions although regional sustainability also includes economic and social aspects. A well-focused and prioritised RIS is beneficial for regional sustainable development.

Quantitative Sustainability Disclosure –An international comparison and its impact on investor valuation

This research focuses on the link between quantitative sustainability disclosure and information asymmetry. It builds upon previous research which links information asymmetry with voluntary disclosure. Stakeholders from the financial services sector claim that sustainability disclosure needs to be more numerical and comparable between companies. This research covers 111 firms from Denmark, Finland, the Netherlands and Sweden from non-service industries and studies how quantitative their sustainability disclosure is, and whether or not there is a negative relation with information asymmetry. The results support the hypotheses, where two out of three information asymmetry proxies have a significant negative relation with quantitative disclosure. Size is supported as a moderating factor. Quantitativity also proves to have a significant link with third party sustainability ratings. The direct link between quantitativity and cost of capital is not however supported.

THE ROLE OF INFORMATION TECHNOLOGY IN CREATING SUSTAINABILITY VALUE FOR FINANCIAL INSTITUTIONS IN 2020 : a scenario planning approach

The growing importance of global sustainability issues has been causing many changes to the financial services industry. Facts such as climate change, social development and the financial crisis in 2008 have been making banks reconsider the manner that they consider environmental, social and economic factors in their decision-making process. At the same time, information technology (IT) has been transforming the financial service industry and its fast development has casted doubts on the way it should be managed within an organization. This current changing environment brings a number of uncertainties to the future that cannot be addressed using traditional forecasting techniques. This research investigates how IT can bring value to sustainability in the financial service industry in 2020. Through the use of a scenario planning technique, we analyzed how trends in the current environment (considering the relation between sustainability, financial institutions an IT) can lead to four different future scenarios. Then, we discussed how IT can improve a bank’s sustainability performance, considering the limitations of each scenario.

Disruptive innovations at the bottom of the pyramid : can they impact the sustainability of today´s top companies?

Due to the different dynamics required for organizations to serve the emerging market which contains billions of people at the bottom of the pyramid (BOP) coupled with the increasing desire for organizations to grow and be more multinational, organizations need to continually innovate. However, the tendency for large and established companies to ignore the BOP market and rather focus on existing markets, gives an indication of the existence of a vulnerability that potentially disruptive innovations from the BOP will not be recognized in good time for a counter measure. This can be deduced from the fact that good management practice advocates that managers should learn and listen to their customers. Therefore majority of the large existing companies continually focus on their main customer/market with sustaining innovations which leaves aspiring new entrants with an underserved BOP market to experiment with. With the aid of research interviews and an agent-based model (ABM) simulation, this thesis examines the attributes of BOP innovations that can qualify them as disruptive and the possibilities of tangible disruptive innovations arising from the bottom of the pyramid and their underlying drivers. The thesis Furthermore, examines the associated impact of such innovations on the future sustainability of established large companies that are operating in the developed world, particularly those with a primary focus which is targeted towards the market at the top of the pyramid (TOP). Additionally, with the use of a scenario planning model, the research provides an evaluation of the possible evolution and potential sustainability impacts that could emerge, from the interplay of innovations at the two pyramidal market levels and the chosen market focus of organizations – TOP or BOP. Using four scenario quadrants, the thesis demonstrates the resulting possibilities from the interaction between the rate of innovations and the segment focused on by organizations with disruptive era characterizing the paradigm shift quadrant. Furthermore, a mathematical model and two theoretical propositions are developed for further research. As recommendations, the thesis also extends the ambidextrous organizational theory, business model innovation and portfolio diversification as plausible recommendations to limit a catastrophic impact, resulting from disruptive innovations.

Partnerships in sustainable urban development : experiences from Sweden and Finland

This thesis examines partnerships in sustainable urban development projects. Achievement of urban development requires the involvement of several parties. The cooperation of the actors of sustainable urban development is achieved by forming partnerships. The purpose of this study is to find solutions and best practices for the management of partnerships in sustainable residential development projects by examining partnerships and their success factors in sustainable urban development. The impact of the roles, responsibilities and interactions of actors taking part in the processes of creating sustainable urban development in outcomes of these development projects and thus on the overall success of accomplishing sustainable development raises the question of how to manage these collaborations. In order to be able to find the best ways of organizing sustainable urban development projects, it is crucial to have the knowledge of how the interactions between all the parties involved in the development can be managed successfully to give the best outcomes. The main research question of this study is: What are the characteristics of successful partnerships in sustainable urban development projects? In order to answer this question, the success factors in partnerships between actors of sustainable urban development are analyzed. In addition, challenges related to these partnerships are examined to get a more comprehensive view of the features of these collaborative ventures and the obstacles that have to be overcome to ensure the successfulness of cooperation. The research approach is multiple case study comprising four cases. The empirical data has been gathered through theme interviews from four different sustainable residential district projects in Sweden and Finland. A comparative analysis of the cases is performed, based on which seven success factors of partnerships in sustainable urban development supported by the prevailing theories are formulated. In addition, challenges faced by projects regarding the partnerships are discussed.

Comparison of sustainability of technologies for water desalination

The aim of this work is to perform an in-depth overview on the sustainability of several major commercialized technologies for water desalination and to identify the challenges and propose suggestions for the development of water desalination technologies. The overview of those technologies mainly focuses on the sustainability from the viewpoint of total capital investment, total product cost, energy consumption and global warming index. Additionally, a systematic sustainability assessment methodology has been introduced to validate the assessment process. Conclusions are:1) Reverse osmosis desalination (RO) plants are better than multi-stage flash distillation (MSF) desalination plants and multiple-effect distillation (MED) desalination plants from the viewpoint of energy consumption, global warming index and total production cost; 2)Though energy intensive, MSF plants and MED plants secure their advantages over RO plants by lower total capital investment, wider applicability and purer water desalted and they are still likely to flourish in energy-rich area;3) Water production stage and wastewater disposal stage are the two stages during which most pollutant gases are emitted. The water production stage alone contributes approximately 80~90% of the total pollutant gases emission during its life cycle; 4)The total capital cost per m3 desalted water decreases remarkably with the increasing of plant capacity. The differences between the capital cost per m3 desalted water of RO and other desalination plants will decrease as the capacity increases; 5) It is found that utilities costs serve as the major part of the total product cost, and they account for 91.16%, 85.55% and 71.26% of the total product cost for MSF, MED and RO plants, respectively; 6) The absolute superiority of given technology depends on the actual social-economic situation (energy prices, social policies, technology advancements).