Bonding of Composite Resin to Alumina and Zirconia Ceramics with Special Emphasis on Surface Conditioning and Use of Coupling Agents

Dental oxide ceramics have been inspired by their biocompability and mechanical properties which have made durable all-ceramic structures possible. Clinical longevity of the prosthetic structures is dependent on effective bonding with luting cements. As the initial shear bond strength values can be comparable with several materials and procedures, long-term durability is affected by ageing. Aims of the current study were: to measure the shear bond strength of resin composite-to-ceramics and to evaluate the longevity of the bond; to analyze factors affecting the bond, with special emphasis on: the form of silicatization of the ceramic surface; form of silanization; type of resin primer and the effect of the type of the resin composite luting cement; the effect of ageing in water was studied regarding its effect to the endurance of the bond. Ceramic substrates were alumina and yttrium stabilized zirconia. Ceramic conditioning methods included tribochemical silicatization and use of two silane couplings agents. A commercial silane primer was used as a control silane. Various combinations of conditioning methods, primers and resin cements were tested. Bond strengths were measured by shear bond strength method. The longevity of the bond was generally studied by thermocycling the materials in water. Additionally, in one of the studies thermal cycling was compared with long-term water storaging. Results were analysed statistically with ANOVA and Weibull analysis. Tribochemical treatment utilizing air pressure of 150 kPa resulted shear bond strengths of 11.2 MPa to 18.4 MPa and air pressure of 450 kPa 18.2 MPa to 30.5 MPa, respectively. Thermocycling of 8000 cycles or four years water storaging both decreased shear bond strength values to a range of 3.8 MPa to 7.2 MPa whereas initial situation varied from 16.8. Mpa to 23.0 MPa. The silane used in studies had no statistical significance. The use of primers without 10-MDP resulted spontaneous debonding during thermocycling or shear bond strengths below 5 MPa. As conclusion, the results showed superior long-term bonding with primers containing 10-MDP. Silicatization with silanizing showed improved initial shear bond strength values which considerably decreased with ageing in water. Thermal cycling and water storing for up to four years played the major role in reduction of bond strength, which could be due to thermal fatigue of the bonding interface and hydrolytic degradation of the silane coupled interface.

Enhancing absorptive capacity in a non-research and development. An action research approach to converting individual observations into organisational awareness

The ability to recognize potential knowledge and convert it into business opportunities is one of the key factors of renewal in uncertain environments. This thesis examines absorptive capacity in the context of non-research and development innovation, with a primary focus on the social interaction that facilitates the absorption of knowledge. It proposes that everyone is and should be entitled to take part in the social interaction that shapes individual observations into innovations. Both innovation and absorptive capacity have been traditionally related to research and development departments and institutions. These innovations need to be adopted and adapted by others. This so-called waterfall model of innovations is only one aspect of new knowledge generation and innovation. In addition to this Science–Technology–Innovation perspective, more attention has been recently paid to the Doing–Using–Interacting mode of generating new knowledge and innovations. The amount of literature on absorptive capacity is vast, yet the concept is reified. The greater part of the literature links absorptive capacity to research and development departments. Some publications have focused on the nature of absorptive capacity in practice and the role of social interaction in enhancing it. Recent literature on absorptive capacity calls for studies that shed light on the relationship between individual absorptive capacity and organisational absorptive capacity. There has also been a call to examine absorptive capacity in non-research and development environments. Drawing on the literature on employee-driven innovation and social capital, this thesis looks at how individual observations and ideas are converted into something that an organisation can use. The critical phases of absorptive capacity, during which the ideas of individuals are incorporated into a group context, are assimilation and transformation. These two phases are seen as complementary: whereas assimilation is the application of easy-to-accept knowledge, transformation challenges the current way of thinking. The two require distinct kinds of social interaction and practices. The results of this study can been crystallised thus: “Enhancing absorptive capacity in practicebased non-research and development context is to organise the optimal circumstances for social interaction. Every individual is a potential source of signals leading to innovations. The individual, thus, recognises opportunities and acquires signals. Through the social interaction processes of assimilation and transformation, these signals are processed into the organisation’s reality and language. The conditions of creative social capital facilitate the interplay between assimilation and transformation. An organisation that strives for employee-driven innovation gains the benefits of a broader surface for opportunity recognition and faster absorption.” If organisations and managers become more aware of the benefits of enhancing absorptive capacity in practice, they have reason to assign resources to those practices that facilitate the creation of absorptive capacity. By recognising the underlying social mechanisms and structural features that lead either to assimilation or transformation, it is easier to balance between renewal and effective operations.

Focus on Users – The National Digital Library of Finland

Heli Kautosen esitys Digital Humanities 2012 -konferenssissa Hampurissa 20.7.2012

Molecular diagnostics of rare inherited SYNDROMES with a view on diagnostic test development

CHARGE syndrome, Sotos syndrome and 3p deletion syndrome are examples of rare inherited syndromes that have been recognized for decades but for which the molecular diagnostics only have been made possible by recent advances in genomic research. Despite these advances, development of diagnostic tests for rare syndromes has been hindered by diagnostic laboratories having limited funds for test development, and their prioritization of tests for which a (relatively) high demand can be expected. In this study, the molecular diagnostic tests for CHARGE syndrome and Sotos syndrome were developed, resulting in their successful translation into routine diagnostic testing in the laboratory of Medical Genetics (UTUlab). In the CHARGE syndrome group, mutation was identified in 40.5% of the patients and in the Sotos syndrome group, in 34%, reflecting the use of the tests in routine diagnostics in differential diagnostics. In CHARGE syndrome, the low prevalence of structural aberrations was also confirmed. In 3p deletion syndrome, it was shown that small terminal deletions are not causative for the syndrome, and that testing with arraybased analysis provides a reliable estimate of the deletion size but benign copy number variants complicate result interpretation. During the development of the tests, it was discovered that finding an optimal molecular diagnostic strategy for a given syndrome is always a compromise between the sensitivity, specificity and feasibility of applying a new method. In addition, the clinical utility of the test should be considered prior to test development: sometimes a test performing well in a laboratory has limited utility for the patient, whereas a test performing poorly in the laboratory may have a great impact on the patient and their family. At present, the development of next generation sequencing methods is changing the concept of molecular diagnostics of rare diseases from single tests towards whole-genome analysis.

Containment Measures in Adolescent Psychiatric Care - Focus on Mechanical Restrain

Rajoitetoimet, erityisesti sitominen, nuorisopsykiatrisessa hoitotyössä Tutkimuksen tavoitteena oli kuvata ja syventää tietoa rajoitetoimien, erityisesti sitomisen, käytöstä nuorisopsykiatrisessa vastentahtoisessa osastohoidossa. Tutkimuksen tavoitteena oli kuvata hoitajien, lääkäreiden ja potilaiden asenteita eri rajoittamiskeinoja kohtaan nuorisopsykiatrisessa osastohoidossa, kerätä tietoa yhden vuoden aikana tapahtuneiden sitomisten määrästä ja luonteesta sekä kuvata potilaiden kokemuksia sitomisesta nuorisopsykiatrisen osastohoidon aikana. Tutkimus tuottaa arvokasta tietoa korkeatasoisten sitomiskäytäntöjen kehittämiseen nuorisopsykiatrisessa osastohoidossa, sekä sitomisten määrää vähentämällä että sitomistapoja kehittämällä. Tavoitteena on parantaa sidottujen potilaiden kliinistä hoitoa. Tutkimusaineisto kerättiin suomalaisilla, pääkaupunkiseudulle sijoittuvilla, nuorisopsykiatrisilla osastoilla neljässä vaiheessa lokakuun 2009 ja huhtikuun 2012 välisenä aikana. Helsingin ja Uudenmaan sairaanhoitopiirin (HUS) nuorisopsykiatrian erikoisalan seitsemän suljetun osaston hoitohenkilökunta sekä lääkärit suhtautuivat myönteisesti rajoittamistoimenpiteisiin. Nuorisopsykiatriset potilaat suhtautuivat rajoittamistoimenpiteisiin kriittisemmin kuin henkilökunta. Nuoret suhtautuivat myönteisimmin tarvittaessa annettavaan lääkitykseen, ajoittaiseen tarkkailuun ja kulun rajoittamiseen. Vähiten hyväksytty menetelmä oli verkkosänky. Nuoret arvioivat sitomisen kolmen vähiten hyväksytyn menetelmän joukkoon. Sitomisen esiintyvyys ja pitkien sitomisten määrä olivat korkeita tutkimukseen valituissa yksiköissä. Useimmat sidotut nuoret tiesivät syyn sitomiseensa, suhtautuivat siihen ambivalentisti nähden siinä sekä hyötyä että haittaa, pitäen sitä kuitenkin rangaistuksena. Huolimatta tästä, suurin osa haastatelluista nuorista koki, että joissain tilanteissa sitomista tarvitaan nuorisopsykiatrisessa osastohoidossa. Nuorilla oli monia ehdotuksia, kuinka parantaa sitomista käytännön osastohoidossa. Tämä väitöskirja tuottaa uutta tietoa eri rajoittamistoimenpiteiden ja sitomisen toteuttamisesta nuorisopsykiatrisessa osastohoidossa. Käytännön hoitotyön parantamiseksi nuorisopsykiatrisilla osastoilla tarvitaan laaja-alaista ja syvälle luotaavaa koulutusta, jotta rajoittamis-toimenpiteiden määrää voidaan vähentää. Myös kriisitilanteiden hallintaan tarvitaan uusia keinoja. Tietoa, kuvausta toimenpiteistä ja tilanteiden käsittelyä jälkikäteen tulee tarjota ala-ikäiselle potilaalle hänen kehitystasonsa huomioiden. Sitomisten määrää tulee vähentää ja niiden kestoa lyhentää. Nuorten tulee olla aktiivisesti mukana kehittämässä aggression hallintamenetelmiä suomalaisessa nuorisopsykiatrisessa osastohoidossa.

Perspectives on narrative discourse markers : focus on Old English þa

Ett element som har intresserat forskarna av fornengelska sedan början av filologiska studier är adverbet þa ’då’, som är högfrekvent i många berättande texter. Utöver ordföjldsregeln enligt vilken satsinitialt þa följs av omvänd ordföljd, finns det redan tidigt kommentarer om användningen av þa för emfas, livlighet och konnektivitet. Även om sådana karakteriseringar tar den textuella kontexten i beaktande, är deras fokus inte på diskursfunktioner utan på satsgrammatik. Denna avhandling betraktar användningen av þa från diskursstrukturens perspektiv och undersöker dess funktioner i markeringen av berättelsens huvudlinje (eng. grounding), kohesiva kontinuiter (eng. continuities), samt vändpunkter och spänning (eng. peak, tension) i texten. I stället för att fokusera på bara en funktion som har associerats med þa, undersöks denna frekventa element från olika perspektiv. Genom både kvantitativa och kvalitativa analyser av narrativt material, visar de inkluderade delstudierna att detta ord spelar en viktig roll i struktureringen av fornengelska berättelser. Parallellt med kärnfunktionen att markera berättelsens huvudlinje, används þa i samspel med andra strukturerande element för att uttrycka den hierarkiska strukturen och spänning i berättelsen. Jämförelser med andra uttryck av temporal kontinuitet visar att þa skiljer sig från dem i sina användningsmönster, vilket vidare bekräftar dess status som en narrativ diskursmarkör.

From Persephone to Pan: D. H. Lawrence's mythopoeic vision of the integrated personality with special emphasis on the short fiction and other writings in the early nineteen twenties

This doctoral thesis was published in printed form in 1987. It was digitized from paper copy in 2013. Unfortunately on some pages the digitizaion process has not been complete, i.e there are some minor typographic erros on some pages.

Software development methods and quality assurance: Special focus on South Korea

The purpose of this study was to explore software development methods and quality assurance practices used by South Korean software industry. Empirical data was collected by conducting a survey that focused on three main parts: software life cycle models and methods, software quality assurance including quality standards, the strengths and weaknesses of South Korean software industry. The results of the completed survey showed that the use of agile methods is slightly surpassing the use of traditional software development methods. The survey also revealed an interesting result that almost half of the South Korean companies do not use any software quality assurance plan in their projects. For the state of South Korean software industry large number of the respondents thought that despite of the weakness, the status of software development in South Korea will improve in the future.

Focus on the user: perception, expectations and needs

Esitys KDK-käytettävyystyöryhmän järjestämässä seminaarissa: Miten käyttäjien toiveet haastavat metatietokäytäntöjämme? / How users' expectations challenge our metadata practices? 30.9.2014.

Monolithic zirconium dioxide as a full contour restorative material: With special emphasis on the optical and mechanical properties

Full contour monolithic zirconia restorations have shown an increased popularity in the dental field over the recent years, owing to its mechanical and acceptable optical properties. However, many features of the restoration are yet to be researched and supported by clinical studies to confirm its place among the other indirect restorative materials This series of in vitro studies aimed at evaluating and comparing the optical and mechanical properties, light cure irradiance, and cement polymerization of multiple monolithic zirconia material at variable thicknesses, environments, treatments, and stabilization. Five different monolithic zirconia materials, four of which were partially stabilized and one fully stabilized were investigated. The optical properties in terms of surface gloss, translucency parameter, and contrast ratio were determined via a reflection spectrophotometer at variable thicknesses, coloring, sintering method, and after immersion in an acidic environment. Light cure irradiance and radiant exposure were quantified through the specimens at variable thicknesses and the degree of conversion of two dual-cure cements was determined via Fourier Transform Infrared spectroscopy. Bi-axial flexural strength was evaluated to compare between the partially and fully stabilized zirconia prepared using different coloring and sintering methods. Surface characterization was performed using a scanning electron microscope and a spinning disk confocal microscope. The surface gloss and translucency of the zirconia investigated were brand and thickness dependent with the translucency values decreasing as the thickness increased. Staining decreased the translucency of the zirconia and enhanced surface gloss as well as the flexural strength of the fully stabilized zirconia but had no effect on partially stabilized zirconia. Immersion in a corrosive acid increased surface gloss and decreased the translucency of some zirconia brands. Zirconia thickness was inversely related to the amount of light irradiance, radiant exposure, and degree of monomer conversion. Type of sintering furnace had no effect on the optical and mechanical properties of zirconia. Monolithic zirconia maybe classified as a semi-translucent material that is well influenced by the thickness, limiting its use in the esthetic zones. Conventional acid-base reaction, autopolymerizing and dual-cure cements are recommended for its cementation. Its desirable mechanical properties give it a high potential as a restoration for posterior teeth. However, close monitoring with controlled clinical studies must be determined before any definite clinical recommendations can be drawn.