Evaluation and realisation of a market entry method: The entry of a small high technology company into the British construction software markets

Tutkielman tavoitteena on tutkia, mikä olisi parhaiten case-yritykselle sopiva menetelmä tulla tekemään kauppaa ulkomaan markkinoille. Kaikki yleiset kansainvälisille markkinoilletulomenetelmät esitetään ja niiden edut ja haitat tuodaan esille. Selvittäessä tehtävänantajayrityksen resurssit, odotukset ja vaatimukset todetaan, että yhteistyössä tehtävä markkinoilletulo on pätevin vaihtoehto. Tämän jälkeen valitaan parhaiten tarkoitukseen sopiva yritys ennalta valitusta yritysvaihtoehtojen ryhmästä ja testataan tämän yrityksen yhteistyösopivuus case-yrityksen kanssa. Yritysten välinen yhteistyösopivuus arvioidaan analysoimalla yritykset haastattelujen avulla ja tutkielmassa esitettyjen teorioiden avulla. Sopivuus todetaan hyväksi, kattaen 71 prosenttia analysoiduista kohdista. Kaksikymmentäyhdeksän prosenttia kohdista todetaan kohdiksi, joissa yritysten välinen yhteisymmärrys ei ole toimeksiantajayrityksen minimivaatimukset täyttävää. Näitä kohtia tullaan käyttämään suunnittelun pohjana kun suunnitellaan jatkoneuvotteluja yhteistyön käynnistämiseksi.

Corporate Social and Regional Responsibility - The View of Small and Medium-sized Enterprises

The objective of this research was to understand and describe what corpo-rate social and regional responsibility is in SMEs and define the meaning of these concepts to the community and region. Corporate social respon-sibility (CSR) creates a basis for regional responsibility. Regional respon-sibility is a new concept and this research examines it from SMEs’ view-point. This is a theoretical research and the aim is to create a theoretical framework of SMEs’ corporate social and regional responsibility. This framework supports the future research on the subject. The research results show that CSR of SMEs is practical, informal and dependent on the scarce resources of SMEs. CSR is a complex and deep concept and SMEs have their own way of interpreting it. It can be stated that CSR-practises in SMEs are closely connected to employment, envi-ronment, community and supply chain. The challenge is to find motivation to socially and regionally responsible behaviour in SMEs. Benefiting from responsible behaviour and the attitude of SME’s owner-manager are the key reasons for SMEs to involve in CSR and regional responsibility. The benefits of this involvement are for example improved image, reputation and market position. CSR can also be used in SMEs as risk management tool and in cost reduction. This study indicates also that creation of strate-gic partnerships, local government participation, a proper legal system and financial support are the basic issues which support CSR of SMEs. This research showed that regional responsibility of SMEs includes active participation in regional strategy processes, L&RED initiatives and regional philanthropy. For SMEs regional responsibility means good relationships with the community and other related stakeholders, involvement in L&RED initiatives and acting responsibly towards the operating environment. In SMEs’ case this means that they need to understand the benefits of this kind of involvement in order to take action and participate. As regional responsibility includes the relationships between firm and the community, it can be stated that regional responsibility extends CSR’s view of stakeholders and emphasises both, the regional stakeholders and public-private partnerships. Community engagement and responsible be-haviour towards community can be seen as a part of SMEs’ social and regional responsibility. This study indicates that social and regional re-sponsibility of SMEs have a significant influence on the community and region where they are located. Better local and regional relationships with regional and community actors are the positive impacts of social and re-gional responsibility of SMEs. Socially and regionally responsible behav-iour creates a more positive environment and deepens the involvement of SMEs to community and L&RED initiatives.

Determination of compression behaviour of coating layer

The strength properties of paper coating layer are very important in converting and printing operations. Too great or low strength of the coating can affect several problems in printing. One of the problems caused by the strength of coating is the cracking at the fold. After printing the paper is folded to final form and the pages are stapled together. In folding the paper coating can crack causing aesthetic damage over printed image or in the worst case the centre sheet can fall off in stapling. When folding the paper other side undergoes tensile stresses and the other side compressive stresses. If the difference between these stresses is too high, the coating can crack on the folding. To better predict and prevent cracking at the fold it is good to know the strength properties of coating layer. It has measured earlier the tensile strength of coating layer but not the compressive strength. In this study it was tried to find some way to measure the compressive strength of the coating layer and investigate how different coatings behave in compression. It was used the short span crush test, which is used to measure the in-plane compressive strength of paperboards, to measure the compressive strength of the coating layer. In this method the free span of the specimen is very small which prevent buckling. It was measured the compressive strength of free coating films as well as coated paper. It was also measured the tensile strength and the Bendtsen air permeance of the coating film. The results showed that the shape of pigment has a great effect to the strength of coating. Platy pigment gave much better strength than round or needle-like pigment. On the other hand calcined kaolin, which is also platy but the particles are aggregated, decreased the strength substantially. The difference in the strength can be explained with packing of the particles which is affecting to the porosity and thus to the strength. The platy kaolin packs up much better than others and creates less porous structure. The results also showed that the binder properties have a great effect to the compressive strength of coating layer. The amount of latex and the glass transition temperature, Tg, affect to the strength. As the amount of latex is increasing, the strength of coating is increasing also. Larger amount of latex is binding the pigment particles better together and decreasing the porosity. Compressive strength was increasing when the Tg was increasing because the hard latex gives a stiffer and less elastic film than soft latex.

Thermoplastic bioactive composite – with special reference to dissolution behaviour and tissue response

Bioactive glasses are surface-active ceramic materials which support and accelerate bone growth in the body. During the healing of a bone fracture or a large bone defect, fixation is often needed. The aim of this thesis was to determine the dissolution behaviour and biocompatibility of a composite consisting of poly(ε-caprolactone-co-DL-lactide) and bioactive glass (S53P4). In addition the applicability as an injectable material straight to a bone defect was assessed. In in vitro tests the dissolution behaviour of plain copolymer and composites containing bioactive glass granules was evaluated, as well as surface reactivity and the material’s capability to form apatite in simulated body fluid (SBF). The human fibroblast proliferation was tested on materials in cell culture. In in vivo experiments, toxicological tests, material degradation and tissue reactions were tested both in subcutaneous space and in experimental bone defects. The composites containing bioactive glass formed a unified layer of apatite on their surface in SBF. The size and amount of glass granules affected the degradation of polymer matrix, as well the material’s surface reactivity. In cell culture on the test materials the human gingival fibroblasts proliferated and matured faster compared with control materials. In in vitro tests a connective tissue capsule was formed around the specimens, and became thinner in the course of time. Foreign body cell reactions in toxicological tests were mild. In experimental bone defects the specimens with a high concentration of small bioactive glass granules (<45 μm) formed a dense apatite surface layer that restricted the bone ingrowth to material. The range of large glass granules (90-315 μm) with high concentrations formed the best bonding with bone, but slow degradation on the copolymer restricted the bone growth only in the superficial layers. In these studies, the handling properties of the material proved to be good and tissue reactions were mild. The reactivity of bioactive glass was retained inside the copolymer matrix, thus enabling bone conductivity with composites. However, the copolymer was noticed to degradate too slowly compared with the bone healing. Therefore, the porosity of the material should be increased in order to improve tissue healing.

Regional potential for collaborative implementation of small CHP plants in bioenergy technology

This thesis is a preliminary study targeting South-Eastern Finland. The objective was to find out the financial and functional readiness and willingness of the small and medium-sized enterprises of the region to manufacture and sell distributed bioenergy solutions collaboratively as a business network. In this case these solutions mean small-scale (0.5 - 3 MW) woodchips-operated combined heat and power (CHP) plants. South-Eastern Finland has suffered from a decline in the recent years, mostly due to the problems of the traditionally strong industrial know-how area of the region, the paper industry. Local small and medium-sized companies will have to find new ways to survive the toughening competition. A group of 40 companies from suitable industries were selected and financial and comparative analysis was performed on them. Additionally 19 managing directors of the companies were selected for an interview to find out their views on networking, its requirements, advantages and the general interest in it. The studied companies were found to be generally in fairly good financial condition and in that sense, fit for networking activities. The interviews revealed that the companies were capable of producing all the needed elements for the plants in question, and the managers appeared to be very interested in and have a positive attitude towards such business networks. Thus it can be said that the small and medium-sized companies of the region are capable of and interested in manufacturing small bio-CHP plants as a production network.

Numerical modelling of small supersonic axial flow turbines

Supersonic axial turbine stages typically exhibit lower efficiencies than subsonic axial turbine stages. One reason for the lower efficiency is the occurrence of shock waves. With higher pressure ratios the flow inside the turbine becomes relatively easily supersonic if there is only one turbine stage. Supersonic axial turbines can be designed in smaller physical size compared to subsonic axial turbines of same power. This makes them good candidates for turbochargers in large diesel engines, where space can be a limiting factor. Also the production costs are lower for a supersonic axial turbine stage than for two subsonic stages. Since supersonic axial turbines are typically low reaction turbines, they also create lower axial forces to be compensated with bearings compared to high reaction turbines. The effect of changing the stator-rotor axial gap in a small high (rotational) speed supersonic axial flow turbine is studied in design and off-design conditions. Also the effect of using pulsatile mass flow at the supersonic stator inlet is studied. Five axial gaps (axial space between stator and rotor) are modeled using threedimensional computational fluid dynamics at the design and three axial gaps at the off-design conditions. Numerical reliability is studied in three independent studies. An additional measurement is made with the design turbine geometry at intermediate off-design conditions and is used to increase the reliability of the modelling. All numerical modelling is made with the Navier-Stokes solver Finflo employing Chien’s k ¡ ² turbulence model. The modelling of the turbine at the design and off-design conditions shows that the total-to-static efficiency of the turbine decreases when the axial gap is increased in both design and off-design conditions. The efficiency drops almost linearily at the off-design conditions, whereas the efficiency drop accelerates with increasing axial gap at the design conditions. The modelling of the turbine stator with pulsatile inlet flow reveals that the mass flow pulsation amplitude is decreased at the stator throat. The stator efficiency and pressure ratio have sinusoidal shapes as a function of time. A hysteresis-like behaviour is detected for stator efficiency and pressure ratio as a function of inlet mass flow, over one pulse period. This behaviour arises from the pulsatile inlet flow. It is important to have the smallest possible axial gap in the studied turbine type in order to maximize the efficiency. The results for the whole turbine can also be applied to some extent in similar turbines operating for example in space rocket engines. The use of a supersonic stator in a pulsatile inlet flow is shown to be possible.

Corrosion behaviour of boiler tube materials during combustion of fuels containing Zn and Pb

Många förbränningsanläggningar som bränner utmanande bränslen såsom restfraktioner och avfall råkar ut för problem med ökad korrosion på överhettare och/eller vattenväggar pga. komponenter i bränslena som är korrosiva. För att minimera problemen i avfallseldade pannor hålls ångparametrarna på en relativt låg nivå, vilket drastiskt minskar energiproduktionen. Beläggningarna i avfallseldade pannor består till största delen av element som är förknippade med högtemperaturkorrosion: Cl, S, alkalimetaller, främst K och Na, och tungmetaller som Pb och Zn, och det finns också indikationer av Br-förekomst. Det låga ångtrycket i avfallseldade pannor påverkar också stålrörens temperatur i pannväggarna i eldstaden. I dagens läge hålls temperaturen normalt vid 300-400 °C. Alkalikloridorsakad (KCl, NaCl) högtemperaturkorrosion har inte rapporterats vara relevant vid såpass låga temperaturer, men närvaro av Zn- och Pb-komponenter i beläggningarna har påvisats förorsaka ökad korrosion redan vid 300-400 °C. Vid förbränning kan Zn och Pb reagera med S och Cl och bilda klorider och sulfater i rökgaserna. Dessa tungmetallföreningar är speciellt problematiska pga. de bildar lågsmältande saltblandningar. Dessa lågsmältande gasformiga eller fasta föreningar följer rökgasen och kan sedan fastna eller kondensera på kallare ytor på pannväggar eller överhettare för att sedan bilda aggressiva beläggningar. Tungmetallrika (Pb, Zn) klorider och sulfater ökar risken för korrosion, och effekten förstärks ytterligare vid närvaro av smälta. Motivet med den här studien var att få en bättre insikt i högtemperaturkorrosion förorsakad av Zn och Pb, samt att undersöka och prediktera beteendet och motståndskraften hos några stålkvaliteter som används i överhettare och pannväggar i tungmetallrika förhållanden och höga materialtemperaturer. Omfattande laboratorie-, småskale- och fullskaletest utfördes. Resultaten kan direkt utnyttjas i praktiska applikationer, t.ex. vid materialval, eller vid utveckling av korrosionsmotverkande verktyg för att hitta initierande faktorer och förstå deras effekt på högtemperaturkorrosion.

Collaborative information behaviour : a case study of two research groups

The aim of the licentiate thesis is to examine researchers' information practices in research groups. The researchers were involved with study communication and media related issues within Social Sciences and Humanities Faculties. The theoretical framework of the study comprises the new holistic models of information seeking (for example: Meho and Tibbo, 2003; Seldén, 1999) and the collective aspects of information behaviour (Prekop, 2002 ; Talja, 2002; Talja and Hansen, 2006). The research questions are: 1. How do scholars seek information in research groups? 2 What kind of collaborative information behaviour occurs in the research groups? The research data was gathered by interviews and observations. Three meetings of a research group at the University of Tampere were observed during the autumn of 2004. The group members and the group leader of the research group were interviewed in the spring of 2005. The research group members and the group leader of a research group at the University of Jyväskylä were interviewed in the autumn of 2005. Altogether, two research group leaders and eight researchers were interviewed. The significance of the research group for information seeking is more important in closeknit research groups than in rather loose research groups. The significance of the research group for information seeking can be at least threefold. First, research group members can inform the group about relevant information resources and potential library or other information services. Second, the research group can to some extent compensate for the information seeking systems of libraries by distributing material and information resources. Third, information seeking can be carried out in collaboration in research groups. The significance of the research group was found to be most important in informing about new information services and marketing library systems. Recommendations from colleagues were often needed to mobilize researchers into using new library services. The significance of colleagues in informing about library services is in line with earlier studies. The present study showed that sometimes information from colleagues was regarded as more important than information distributed directly by the local library. A culture of information sharing, including mutual trust, seemed mainly to be reflected in collaboration and collaborative information seeking in the research groups studied. The timing of the onset of individual research seemed to be related to the information sharing culture and social networks in research groups. The simultaneous onset of the research work by group members seemed to promote the growth of unbiased collaboration, also in information seeking.

Sopeutumattomien oppilaiden tunne- ja itsesäätelytaitojen kehittyminen: Oppilaiden ja opettajien arvioita ja kokemuksia Aggression portaat -interventiosta

Tässä tutkimuksessa tarkastellaan sopeutumattomien erityisoppilaiden tunne- ja itsesäätelytaitojen kehittymistä Aggression portaat -interventio-ohjelman avulla kolmen vuoden tutkimusjakson aikana. Käsite sopeutumaton oppilas ei ole yksiselitteisesti määriteltävissä, mutta tässä tutkimuksessa sillä tarkoitetaan yleisopetussuunnitelman mukaan opiskelevaa oppilasta, joka käyttäytymiseen ja tunne-elämään liittyvien haasteidensa vuoksi on saanut siirron erityisopetuksen oppilaaksi ja saa enintään 10 oppilaan opetusryhmässä erityistä pedagogista tukea. Tutkimuksen yksi keskeinen tehtävä oli tutkia, onko tunne- ja itsesäätelytaitojen opettamisesta hyötyä sopeutumattomien oppilaiden tunteiden hallinnan ja käyttäytymisen itsesäätelyn kannalta. Tutkimuksen teoreettisena viitekehyksenä on Rose-Krasnorin (1997) malli yksilön sosioemotionaalisesta kompetenssista täydennettynä muiden tutkijoiden näkemyksillä. Sosioemotionaalinen kompetenssi on yläkäsite, johon kuuluvat alakäsitteinä tunne- ja itsesäätelytaidot, sosiokognitiiviset taidot ja sosiaaliset taidot. Lisäksi sosioemotionaaliseen kompetenssiin vaikuttavat kiintymyssuhteet ja osallisuus sekä tavoitteet vuorovaikutuksessa ja konteksti. Tässä tutkimuksessa keskitytään tunne- ja itsesäätelytaitoihin. Interventioryhmän (N=36) muodostivat Varsinais-Suomen alueella opiskelevat sopeutumattomien oppilaiden erityiskoulun 8-13-vuotiaat oppilaat, joille opetettiin tunne- ja itsesäätelytaitoja Aggression portaat -opetusmateriaaliin (Cacciatore 2007) pohjautuvan intervention avulla. Kontrolliryhmän (N=26) oppilaat olivat interventioryhmän oppilaiden ikäisiä ja he opiskelivat Varsinais-Suomen alueen kouluissa pienluokissa myös käyttäytymiseen ja tunne-elämään liittyvien haasteidensa vuoksi. Kontrolliryhmän oppilaat eivät saaneet tutkimusjakson aikana interventio-ohjelman mukaista opetusta. Interventioryhmän oppilaat kävivät erityiskoulua, jossa kaikilla oppilailla oli sopeutumisongelmia ja kontrolliryhmän oppilaat opiskelivat yleisopetuksen koulujen yhteydessä olevilla sopeutumattomien oppilaiden pienluokilla. Tutkimusaineisto on kerätty vuosina 2010-2012. Tutkimusmetodeina olivat sekä oppilaille että opettajille laaditut Webropol-alustaiset kyselyt ja oppilaiden kirjoittamat väkivalta-aiheiset tekstit. Tutkimus- ja kontrolliryhmän oppilaille pidettiin ”Tunteiden hallinta ja käyttäytyminen”- kyselyn avulla alkumittaus syksyllä 2009 ja mittaus toistettiin keväällä 2010, 2011 ja 2012. Kyselyiden avulla selvitettiin, miten oppilaiden tunteiden kokeminen ja ilmaiseminen sekä tunteiden hallinta ja käyttäytymisen itsesäätely muuttuivat tutkimusjakson aikana. Kyselyssä kartoitettiin myös oppilaiden kokemuksia kiusaamisena ilmenevästä väkivallasta. Aineistolähtöisen sisällönanalyysin avulla selvitettiin oppilaiden kirjoitelmista heidän ajatuksiaan ja näkemyksiään väkivallasta ja ehdotuksia keinoista väkivallan vähentämiseksi. Keväällä 2012 interventioryhmän oppilaille ja opettajille laadittujen erillisten kyselyiden avulla selvitettiin sekä oppilaiden että opettajien arvioita ja kokemuksia oppilaiden tunne- ja itsesäätelytaitojen muutoksesta interventio-ohjelman avulla. Lisäksi oppilaat ja opettajat arvioivat pidettyjen tunnetaitotuntien hyödyllisyyttä oppilaille. Interventioryhmän opettajat arvioivat myös Aggression portaat -interventiomateriaalin käyttökelpoisuutta. Vuoden 2014 Perusopetuksen opetussuunnitelman perusteissa esitetyt velvoitteet opettaa kouluissa oppilaille tunne- ja vuorovaikutustaitoja edellyttävät tietoa konkreettisista käytänteistä ja tutkimusperustaisista interventio-ohjelmista. Tämän tutkimuksen tulokset osoittavat, että interventioryhmän muodostaneet sopeutumattomat oppilaat hyötyivät Aggression portaat -interventiosta. Heidän tunne- ja itsesäätelytaidoissaan tapahtui myönteistä kehitystä etenkin myönteisten tunnekokemusten lisääntymisen ja toisiin kohdistuneen fyysisen väkivallan vähenemisen osalta. Myös suhtautuminen väkivaltapelien ikärajoihin oli merkittävästi myönteisempää kuin kontrolliryhmän oppilailla, joilla kielteinen asenne lisääntyi selvästi tutkimusjakson aikana. Lisäksi interventioryhmän oppilailla oli keinoja itsensä rentouttamiseksi, päinvastoin kuin kontrolliryhmän oppilailla, joilla keinottomuuden kokemus jopa lisääntyi. Interventioryhmän oppilaat suhtautuivat hyvin kielteisesti toisen yllyttämiseen väkivaltaiseen tekoon ja kirjoittivat enemmän ajatuksiaan väkivallasta tuoden esille runsaasti ehdotuksia keinoista väkivallan vähentämiseksi. Myös oppilaat ja opettajat kokivat interventio-ohjelman oppilaiden kehityksen kannalta hyödylliseksi ja opettajat myös interventiomateriaalin käyttökelpoiseksi.

Scaling analysis of small break experiments in PACTEL

The purpose of this thesis is to study the scalability of small break LOCA experiments. The study is performed on the experimental data, as well as on the results of thermal hydraulic computation performed on TRACE code. The SBLOCA experiments were performed on PACTEL facility situated at LUT. The temporal scaling of the results was done by relating the total coolant mass in the system with the initial break mass flow and using the quotient to scale the experiment time. The results showed many similarities in the behaviour of pressure and break mass flow between the experiments.