42 resultados para Research Subject Categories::TECHNOLOGY::Other technology::Environmental engineering
Resumo:
Musiikkiteknologia on laaja soveltava tieteenala, jota voidaan hyödyntää kasvatustieteissä, psykologiassa ja kognitiivisissa tieteissä. Musiikkilaitteet ja ohjelmistot hyödyntävät tietotekniikkaa. Musiikkiteknologian ohjelmat ovat joko kaupallisia tai pohjautuvat avoimen lähdekoodin ajatteluun. Tässä työssä kartoitin Linuxin avoimen lähdekoodin virtuaaliinstrumentit sekä toteutin rumpukoneen, kosketinsoittimen ja yksinkertaisen karaokeohjelman mobiilille laitteelle. Tehty työ osoittaa, että tietoteknisin keinoin voidaan toteuttaa tutkimushankkeissa hyödynnettäviä musiikkiteknologian ohjelmia.
Resumo:
The aim of this thesis was to find out how the carbon footprint calculations can be utilized in the company’s external environmental communication, what is the demand for carbon footprint from the market, and how the other actors in the forest industry have approached the issue. The aim was to recognize the best practises to communicate carbon footprints and to find possibilities to extend the UPM-Kymmene Wood Oy’s mill specific carbon footprints. This research included a literature review, an inquiry to the UPM-Kymmene Wood Oy’s sales offices, and Internet survey concerning the external environmental communication in the forest industry and three small case studies based on mill specific parameters. The inquiry to the sales offices showed that the carbon footprint is not yet a common demand from the customers in the wood product sector. In addition, the Internet survey showed that generally in the forest industry, not much has been done concerning carbon footprint communication so far. The biggest challenge in carbon footprint communication is the variation in the knowledge level of the receivers. In addition btob and btoc communication situations demand a different approach to the issue. Carbon profile brochures developed in the company can be seen as suitable for btob communication situations. Case studies have shown that the contribution of final product transport to the overall carbon footprint was significant. It was recommended to include post mill transport in the carbon footprint information supplied to the btob customers. When discussing environmental communication on a general level it can be stated that a good external environmental communication is based on facts, is open and proactive and takes into account the needs of the receiver. However, the openness and the quality of external environmental communication are essentially strategic decisions. The significance of internal communication as well as the knowhow in the communication and marketing networks play a major role in achieving success in external environmental communication. Carbon footprints are only one part of good balanced external environmental communication. One specific environmental feature like carbon footprint should not be over emphasized to the detriment of other important environmental aspects.
Resumo:
The computer is a useful tool in the teaching of upper secondary school physics, and should not have a subordinate role in students' learning process. However, computers and computer-based tools are often not available when they could serve their purpose best in the ongoing teaching. Another problem is the fact that commercially available tools are not usable in the way the teacher wants. The aim of this thesis was to try out a novel teaching scenario in a complicated subject in physics, electrodynamics. The didactic engineering of the thesis consisted of developing a computer-based simulation and training material, implementing the tool in physics teaching and investigating its effectiveness in the learning process. The design-based research method, didactic engineering (Artigue, 1994), which is based on the theoryof didactical situations (Brousseau, 1997), was used as a frame of reference for the design of this type of teaching product. In designing the simulation tool a general spreadsheet program was used. The design was based on parallel, dynamic representations of the physics behind the function of an AC series circuit in both graphical and numerical form. The tool, which was furnished with possibilities to control the representations in an interactive way, was hypothesized to activate the students and promote the effectiveness of their learning. An effect variable was constructed in order to measure the students' and teachers' conceptions of learning effectiveness. The empirical study was twofold. Twelve physics students, who attended a course in electrodynamics in an upper secondary school, participated in a class experiment with the computer-based tool implemented in three modes of didactical situations: practice, concept introduction and assessment. The main goal of the didactical situations was to have students solve problems and study the function of AC series circuits, taking responsibility for theirown learning process. In the teacher study eighteen Swedish speaking physics teachers evaluated the didactic potential of the computer-based tool and the accompanying paper-based material without using them in their physics teaching. Quantitative and qualitative data were collected using questionnaires, observations and interviews. The result of the studies showed that both the group of students and the teachers had generally positive conceptions of learning effectiveness. The students' conceptions were more positive in the practice situation than in the concept introduction situation, a setting that was more explorative. However, it turned out that the students' conceptions were also positive in the more complex assessment situation. This had not been hypothesized. A deeper analysis of data from observations and interviews showed that one of the students in each pair was more active than the other, taking more initiative and more responsibilityfor the student-student and student-computer interaction. These active studentshad strong, positive conceptions of learning effectiveness in each of the threedidactical situations. The group of less active students had a weak but positive conception in the first iv two situations, but a negative conception in the assessment situation, thus corroborating the hypothesis ad hoc. The teacher study revealed that computers were seldom used in physics teaching and that computer programs were in short supply. The use of a computer was considered time-consuming. As long as physics teaching with computer-based tools has to take place in special computer rooms, the use of such tools will remain limited. The affordance is enhanced when the physical dimensions as well as the performance of the computer are optimised. As a consequence, the computer then becomes a real learning tool for each pair of students, smoothly integrated into the ongoing teaching in the same space where teaching normally takes place. With more interactive support from the teacher, the computer-based parallel, dynamic representations will be efficient in promoting the learning process of the students with focus on qualitative reasoning - an often neglected part of the learning process of the students in upper secondary school physics.
Resumo:
This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.
Resumo:
TIIVISTELMÄ Lappeenrannan teknillinen yliopisto Konetekniikan koulutusohjelma Voitto Kettunen Konepajan hitsaustuotannon kehittäminen kattavien laatuvaatimusten mukaiseksi Diplomityö 2015 167 sivua, 39 kuvaa, 26 taulukkoa ja 3 liitettä Tarkastajat: Professori Jukka Martikainen DI Pertti Kaarre Hakusanat: hitsaus, hitsauksen laatu, konepajan laadunhallinta, kattavat laatuvaatimukset, ISO 9001, ISO 3834, EN 1090 Keywords: welding, quality of welding, engineering workshop quality management, comprehensive quality requirements, ISO 9001, ISO 3834, EN 1090 Hitsaamalla liitetyt teräksiset rakenteet muodostavat ylivoimaisesti suurimman osan konepajatuotannosta. Niihin kuuluu esimerkiksi ajoneuvoja, koneita, laitteita, säiliöitä, siiloja, siltoja, mastoja, piippuja, tukirakenteita ja rakennusten runkoja. Tämän diplomityön tavoitteena on kehittää konepajan laadunhallinta sellaiseksi, että se mahdollistaa kattavien laatuvaatimusten täyttämisen hitsaustuotannossa. Laatuvaatimusten täyttämiseen pyritään käyttämällä hitsaustoimintojen standardia EN ISO 3834-2 sekä kantavien teräsrakenteiden standardeja EN 1090-1 ja EN 1090-2. Teräsrakenteiden suunnittelua ohjaa EN 1993 ja niiden toiminnallisia ominaisuuksia tuotestandardit, kuten terässavupiippu- ja säiliöstandardit. Kantavien teräsrakenteiden suunnittelua ja tuotantoa ohjaa myös seuraamusluokan CC, käyttöluokan SC ja tuotantoluokan PC kautta määräytyvä toteutusluokka EXC. Aikaisempaa enemmän tullaan panostamaan esimerkiksi asiakirjojen sähköiseen hallintaan, raaka-aineiden jäljitettävyyteen tuotteeseen, särmien ja kulmien muotoiluun, pintojen käsittelyyn, hitsien tarkastukseen, hitsaushenkilöstön pätevyyteen ja hitsaustuotannon tehokkuuteen. Saarijärven Säiliövalmiste Oy:n hitsauksen laadunhallinta sertifioitiin standardin ISO 3834-2 mukaan ja kantavien teräsrakenteiden FPC-järjestelmä standardisarjaa EN 1090 noudattaen. Samalla tehtiin päivitys laadunhallintajärjestelmään ISO 9001. Toteutus, joka tehtiin sovitussa aikataulussa, haastaa jokaisen toimijan konepajassa toiminnan, tuotannon ja tuotteiden laadun kehittämiseen uusia käytänteitä ja menetelmiä soveltaen. Kehitystoimien tuloksena toiminta on selkeämpää, ennakoitavampaa ja hallitumpaa, mikä lisää yrityksen toiminnan tuottavuutta ja kannattavuutta. Sertifioidut laatujärjestelmät ovat myötävaikuttaneet tilausten lisääntymiseen yrityksen kaikkien tuotteiden osalta.
Resumo:
Kemira Chemicals Oy:n Joutsenon kloori-alkalitehtaalla valmistetaan elektrolyysin avulla lipeää, suolahappoa, natriumhypokloriittia ja vetyä. Tämän työn tavoitteena on kartoittaa kloori-alkalitehtaan tuotantokapasiteetin kasvatuksen yhteydessä esiin tulevat pullonkaulat, lähitulevaisuuden kunnossapitotarpeet sekä parhaat käytettävissä olevat teknologiavaihtoehdot kloori-alkalitehtaan osa-alueille, joihin tuotantokapasiteetin kasvatuspaineet kohdistuvat: elektrolyysi, lipeän haihdutus ja suolahappopolttimet. Pullonkaulojen kartoittaminen toteutettiin rakentamalla taulukkolaskentamalli kloori-alkalitehtaan prosesseista. Mallin avulla simuloitiin elektrolyysin kloorin tuotantoa, jota kasvatettiin asteittain 54 kt:sta/a aina 100 kt:iin/a asti ja tutkittiin prosessien käyttäytymistä. Tarkastelun pohjalta havaittiin, että kloorin tuotantoa kasvattaessa, tulee lisätä myös tuotantokapasiteettia suolahapon valmistukseen, elektrolyysiin, demineralisoidun veden valmistukseen ja lipeän haihdutuslaitokseen sekä suolahapon ja lipeän varastointikapasiteetteihin. Vaihtoehtoiset teknologiat määritettiin kirjallisuudesta ja laitetoimittajien esitteistä. Lähivuosien kunnossapitotarpeet kartoitettiin haastattelemalla tehtaan henkilökuntaa. Työstä eskaloitui useita jatkotutkimuskohteita, joita ovat bipolaari-teknologian soveltuvuus Joutsenon kloori-alkalitehtaalle, uusien HCl-polttimien esisuunnittelu, höyryn käytön tehostaminen nykyisessä lipeän haihdutuslaitoksessa sekä uusien haihdutusteknologioiden soveltuvuus Joutsenon kloori-alkalitehtaalle, höyry- ja jäähdytysverkostojen kartoitukset sekä demineralisoidun veden valmistuskapasiteetin kasvattaminen.
Resumo:
The emerging technologies have recently challenged the libraries to reconsider their role as a mere mediator between the collections, researchers, and wider audiences (Sula, 2013), and libraries, especially the nationwide institutions like national libraries, haven’t always managed to face the challenge (Nygren et al., 2014). In the Digitization Project of Kindred Languages, the National Library of Finland has become a node that connects the partners to interplay and work for shared goals and objectives. In this paper, I will be drawing a picture of the crowdsourcing methods that have been established during the project to support both linguistic research and lingual diversity. The National Library of Finland has been executing the Digitization Project of Kindred Languages since 2012. The project seeks to digitize and publish approximately 1,200 monograph titles and more than 100 newspapers titles in various, and in some cases endangered Uralic languages. Once the digitization has been completed in 2015, the Fenno-Ugrica online collection will consist of 110,000 monograph pages and around 90,000 newspaper pages to which all users will have open access regardless of their place of residence. The majority of the digitized literature was originally published in the 1920s and 1930s in the Soviet Union, and it was the genesis and consolidation period of literary languages. This was the era when many Uralic languages were converted into media of popular education, enlightenment, and dissemination of information pertinent to the developing political agenda of the Soviet state. The ‘deluge’ of popular literature in the 1920s to 1930s suddenly challenged the lexical orthographic norms of the limited ecclesiastical publications from the 1880s onward. Newspapers were now written in orthographies and in word forms that the locals would understand. Textbooks were written to address the separate needs of both adults and children. New concepts were introduced in the language. This was the beginning of a renaissance and period of enlightenment (Rueter, 2013). The linguistically oriented population can also find writings to their delight, especially lexical items specific to a given publication, and orthographically documented specifics of phonetics. The project is financially supported by the Kone Foundation in Helsinki and is part of the Foundation’s Language Programme. One of the key objectives of the Kone Foundation Language Programme is to support a culture of openness and interaction in linguistic research, but also to promote citizen science as a tool for the participation of the language community in research. In addition to sharing this aspiration, our objective within the Language Programme is to make sure that old and new corpora in Uralic languages are made available for the open and interactive use of the academic community as well as the language societies. Wordlists are available in 17 languages, but without tokenization, lemmatization, and so on. This approach was verified with the scholars, and we consider the wordlists as raw data for linguists. Our data is used for creating the morphological analyzers and online dictionaries at the Helsinki and Tromsø Universities, for instance. In order to reach the targets, we will produce not only the digitized materials but also their development tools for supporting linguistic research and citizen science. The Digitization Project of Kindred Languages is thus linked with the research of language technology. The mission is to improve the usage and usability of digitized content. During the project, we have advanced methods that will refine the raw data for further use, especially in the linguistic research. How does the library meet the objectives, which appears to be beyond its traditional playground? The written materials from this period are a gold mine, so how could we retrieve these hidden treasures of languages out of the stack that contains more than 200,000 pages of literature in various Uralic languages? The problem is that the machined-encoded text (OCR) contains often too many mistakes to be used as such in research. The mistakes in OCRed texts must be corrected. For enhancing the OCRed texts, the National Library of Finland developed an open-source code OCR editor that enabled the editing of machine-encoded text for the benefit of linguistic research. This tool was necessary to implement, since these rare and peripheral prints did often include already perished characters, which are sadly neglected by the modern OCR software developers, but belong to the historical context of kindred languages and thus are an essential part of the linguistic heritage (van Hemel, 2014). Our crowdsourcing tool application is essentially an editor of Alto XML format. It consists of a back-end for managing users, permissions, and files, communicating through a REST API with a front-end interface—that is, the actual editor for correcting the OCRed text. The enhanced XML files can be retrieved from the Fenno-Ugrica collection for further purposes. Could the crowd do this work to support the academic research? The challenge in crowdsourcing lies in its nature. The targets in the traditional crowdsourcing have often been split into several microtasks that do not require any special skills from the anonymous people, a faceless crowd. This way of crowdsourcing may produce quantitative results, but from the research’s point of view, there is a danger that the needs of linguists are not necessarily met. Also, the remarkable downside is the lack of shared goal or the social affinity. There is no reward in the traditional methods of crowdsourcing (de Boer et al., 2012). Also, there has been criticism that digital humanities makes the humanities too data-driven and oriented towards quantitative methods, losing the values of critical qualitative methods (Fish, 2012). And on top of that, the downsides of the traditional crowdsourcing become more imminent when you leave the Anglophone world. Our potential crowd is geographically scattered in Russia. This crowd is linguistically heterogeneous, speaking 17 different languages. In many cases languages are close to extinction or longing for language revitalization, and the native speakers do not always have Internet access, so an open call for crowdsourcing would not have produced appeasing results for linguists. Thus, one has to identify carefully the potential niches to complete the needed tasks. When using the help of a crowd in a project that is aiming to support both linguistic research and survival of endangered languages, the approach has to be a different one. In nichesourcing, the tasks are distributed amongst a small crowd of citizen scientists (communities). Although communities provide smaller pools to draw resources, their specific richness in skill is suited for complex tasks with high-quality product expectations found in nichesourcing. Communities have a purpose and identity, and their regular interaction engenders social trust and reputation. These communities can correspond to research more precisely (de Boer et al., 2012). Instead of repetitive and rather trivial tasks, we are trying to utilize the knowledge and skills of citizen scientists to provide qualitative results. In nichesourcing, we hand in such assignments that would precisely fill the gaps in linguistic research. A typical task would be editing and collecting the words in such fields of vocabularies where the researchers do require more information. For instance, there is lack of Hill Mari words and terminology in anatomy. We have digitized the books in medicine, and we could try to track the words related to human organs by assigning the citizen scientists to edit and collect words with the OCR editor. From the nichesourcing’s perspective, it is essential that altruism play a central role when the language communities are involved. In nichesourcing, our goal is to reach a certain level of interplay, where the language communities would benefit from the results. For instance, the corrected words in Ingrian will be added to an online dictionary, which is made freely available for the public, so the society can benefit, too. This objective of interplay can be understood as an aspiration to support the endangered languages and the maintenance of lingual diversity, but also as a servant of ‘two masters’: research and society.
Resumo:
Nopeasti muuttuvissa kilpailutilanteissa varsinkin pienet ja keskisuuret ohjelmistoyritykset joutuvat kilpailuetuja saavuttaakseen tekemään strategisia päätöksiä, joiden vaikutukset voidaan todeta vasta pitkän ajan kuluttua. Sen vuoksi yritysjohto tarvitsee päätöksentekoa varten tukijärjestelmiä, jotka sekä tuottavat informaatiota päätöksenteon tueksi että auttavat vähentämään päätöksistä aiheutuneita riskejä. Tämän työn tavoitteena oli kehittää ohjelmistoyritysten ohjelmistotuoteliiketoimintaa varten elinkaarikustannusmalli, jonka avulla yritysjohto voi arvioida ohjelmistotuotteiden koko-naiskustannuksia koko elinkaaren ajalta. Elinkaarikustannusmallia tutkittiin sekä elinkaarikustannusten että ohjelmistotuotantoprosessien teoreettisissa viitekehyksissä. Empiirinen tieto kerättiin tutkimukseen osallistuneen ohjelmistoyrityksen avulla. Tutkimuksessa kehitetty elinkaarikustannusmalli eroaa monista muista tutkituista kustannusmalleista siinä, että se lähestyy elinkaarikustannusten problematiikkaa strategisesta näkökulmasta, kun taas monet muut mallit toteuttavat tietoteknistä lähestymistapaa. Siten ohjelmistoyrityksen johto voi ohjata tuoteliiketoimintaa osana strategista päätöksentekoa sekä tuotteen elinkaaren kokonaiskustannusten avulla että elinkaarikustannusmallin epäsuorien vaikutusten kautta
Resumo:
The thesis interprets the caveat of Article 194(2) TFEU in order to assess the use of the Article as a legal basis for energy provisions provided by the European Union. The research subject is the Energy Title in the Treaty of the Functioning of the European Union and the possibilities of the application of the legal basis provided therein. The purpose is analysis of the possibilities for providing of provisions within the scope of the caveat found in Article 194(2) TFEU with special regard to the possibilities of providing renewable energy legislation. The purpose of the thesis is on one hand to provide an overview of the premises for providing of energy provisions in the EU, and on the other hand to analyse the Treaty text in order to determine the legal basis for energy provisions. The ultimate objective is to determine the correct legal basis for renewable energy provisions, aimed at the mitigation of climate change. According to Article 194(2) TFEU, the practice of the shared legislative powers in the field of energy are restricted by the retention of certain energy matters within the power of the Member States. The wording of the caveat containing the restrictions is open to interpretation and has been a subject of extensive discussion. Many scholars have argued that the caveat in Article 194(2) TFEU might obstruct decision-making in energy matters. This argument is contested, and the factual impact of the codification of the energy competences is analysed. The correct legal basis for energy provisions depends on the final interpretation of the text of the caveat and the level of significance of the effect of the measure. The use of Article 194(2) TFEU as a legal basis might not be the only option. There is a possibility that the legal bases within the Environmental Title might be used as legal bases for energy provisions in addition to Article 194(2) TFEU.
Resumo:
Tutkimuksen tavoitteena on arvioida, kuinka pienet ja keskisuuret (pk) cleantech-ratkaisuja tarjoavat yritykset sisällyttävät ympäristövastuullisuuden omaan strategiaansa ja toimintaansa. Lisäksi tutkimuksessa pohdittiin miten cleantech-yritysten oman toiminnan ympäristövastuullisuutta olisi syytä kehittää. Tutkimus koostuu teoriaosuudesta, joka pohjautuu kirjallisuuskatsaukseen sekä empiirisestä osuudesta, joka koostuu yrityshaastatteluista. Tulokset kerättiin 16 suomalaisesta Cleantech Finland -verkostoon kuuluvasta pk-yrityksestä. Haastateltavat yritykset jaettiin kolmeen ryhmään: ICT ja palveluntarjoajat, asiantuntijayritykset sekä teknologiayritykset. Lisäksi tutkimuksessa käytettiin vertailuaineistona muutamaa suuryritys-haastattelua. Tutkimuksessa havaittiin, että cleantech-liiketoimintaa harjoittavissa yrityksissä ympäristövastuullisuus nähdään arvoihin perustuvana strategisena kilpailutekijänä, jonka keskeisinä ajureina ovat asiakkaat ja liiketoiminnalliset hyödyt. Yritysten käytännöt ja toimintatavat kuitenkin vaihtelevat suuresti ja vastuullisuuden konkreettinen integroiminen toimintaan ja strategiaan jää epäselväksi.
Resumo:
The thesis interprets the caveat of Article 194(2) TFEU in order to assess the use of the Article as a legal basis for energy provisions provided by the European Union. The research subject is the Energy Title in the Treaty of the Functioning of the European Union and the possibilities of the application of the legal basis provided therein. The purpose is analysis of the possibilities for providing of provisions within the scope of the caveat found in Article 194(2) TFEU with special regard to the possibilities of providing renewable energy legislation. The purpose of the thesis is on one hand to provide an overview of the premises for providing of energy provisions in the EU, and on the other hand to analyse the Treaty text in order to determine the legal basis for energy provisions. The ultimate objective is to determine the correct legal basis for renewable energy provisions, aimed at the mitigation of climate change. According to Article 194(2) TFEU, the practice of the shared legislative powers in the field of energy are restricted by the retention of certain energy matters within the power of the Member States. The wording of the caveat containing the restrictions is open to interpretation and has been a subject of extensive discussion. Many scholars have argued that the caveat in Article 194(2) TFEU might obstruct decision-making in energy matters. This argument is contested, and the factual impact of the codification of the energy competences is analysed. The correct legal basis for energy provisions depends on the final interpretation of the text of the caveat and the level of significance of the effect of the measure. The use of Article 194(2) TFEU as a legal basis might not be the only option. There is a possibility that the legal bases within the Environmental Title might be used as legal bases for energy provisions in addition to Article 194(2) TFEU.
Resumo:
Tutkielman tavoitteena on rakentaa toimiva ympäristöjärjestelmä Thermo Fisher Scientific Oy:lle. Tutkimuksen tarkoituksena on myös löytää kahdelle täysin erilaiselle toiminnalle yhtenäinen ympäristöjärjestelmä, jonka avulla pystytään ottamaan huomioon molempien toimipaikkojen hieman erilaiset vaatimukset. Lisäksi tavoitteena on muodostaa ympäristöjärjestelmälle oma organisaatio, jonka avulla ympäristöjärjestelmän integrointi yrityksen prosesseihin voidaan suorittaa sujuvasti. Aluksi tutkimusongelmaa lähestytään teoreettisesta näkökulmasta,jossa tarkastellaan ympäristöjärjestelmän historiaa, rakennetta, etuja sekä ISO 14001–standardin rakennetta ja sen etenemistä ympäristöjärjestelmän rakentamisen yhteydessä aina kolmannen osapuolen sertifiointiin asti. Empiria osa alkaa alustavalla ympäristökatselmuksella, jossa selvitetään ympäristöasioiden hoidon nykytaso ja luodaan pohja koko ympäristöjärjestelmän luomiselle, jonka vankimpana perustana on ympäristöpolitiikka. Johdon hyväksymä ympäristöpolitiikka varmistaa johdon sitoutumisen järjestelmään. Ympäristöjärjestelmän toimintarakenteen muodostaminen kahdelle erilaiselle toiminnalle onnistui tutkimuksessa kiitettävästi. Se miten ympäristöjärjestelmä toimii todellisuudessa, tullaan näkemään käytännön kokemuksien yhteydessä.
Resumo:
Diplomityö on tehty pienelle alkoholijuomia valmistavalle yritykselle, joka on toiminut alalla 18vuotta. Yrityksellä on takanaan mittavat investoinnit uusiin koneisiin ja laitteisiin. Yrityksen suunnitelmissa on kasvattaa tuotantoaan laajentamalla vientiin. Työssä tarkastellaan sitä, mikä laadunhallintajärjestelmä ISO 9001:2000 on, miten laadunhallintajärjestelmä on kehittynyt, miten se toimii sekä miksi yritykset ovat ottaneet laatujärjestelmän käyttöön. Työssä on läpikäyty Pk-sektorin yritysten luokitteluperusteet, tarkasteltu Pk-yritysten ominaispiirteitä alan tutkimuksen mukaan sekä Pk-yritysten lukumäärääja niiden suhteellista osuutta kaikista yrityksistä. Diplomityössä tarkastellaan standardin vaatimuksia ja tarkoitusta sekä avataan niitä käytännön toimenpiteitä, joita standardien käyttöönotto vaatii organisaatiolta. Työn teoreettisena perustana on käytetty alan kirjallisuuden ja tutkimustulosten suosituksia siitä, miten laadunhallintajärjestelmä tulisi rakentaa ja ottaa käyttöön. Käytännön osuuden työstä muodostaa sertifioidun laadunhallintajärjestelmä ISO 9001:2000 rakentaminen kyseiseen yritykseen. Koska yrityksen lähtötilanne laadun osalta oli erittäin hyvä, standardin vaatimukset oli kohtuullisen helppo täyttää, eivätkä ne aiheuttaneet toimintaan mainittavia muutoksia. Työssä on käsitelty ne standardin vaatimusten täyttämiseksi tehdyt toimenpiteet ja päätökset, joilla yritys saavutti vaatimustenmukaisuuden. Laadunhallintajärjestelmän rakentamisessa tehtyjä toimenpiteitä, päätöksiä ja havaintoja on verrattu alan kirjallisuuden ja tutkimuksen tuloksiin. Tekijä esittää lisäksi omia huomioitaan siitä, kuinka standardin eri vaatimusten kohdalla kannattaa menetellä.
Resumo:
Työssä selvitettiin Puolustusvoimien Teknillisen Tutkimuslaitoksen Elektroniikka- ja informaatiotekniikan verkottumisen nykytila sekä esitettiin vaihtoehtoja teknisen tutkimustoiminnan kehittämiseksi.Lisäksi perehdyttiin verkottumiseen käsitteenä sekä verkottumisen motiiveihin. Verkkojen syntymekanismeihin sekä erilaisten verkkojen ominaisuuksiin perehdyttiin etsittäessä sopivaa verkottumisstrategiaa tai –tapaa puolustusvoimien teknisen tutkimustoiminnan kehittämiseksi. Kolmea verkottumisvaihtoehtoa tutkittiin: hierarkkista tai vertikaalista verkottumista, kumppanuutta sekä strategista verkottumista. Kuvattaessa Puolustusvoimien Teknillisen Tutkimuslaitoksen Elektroniikka- ja informaatiotekniikkaosaston verkottumisen nykytilaa kuvailtiin myös osaston ja eräiden kumppaneiden yhteistyöstä saamaa hyötyä.Lopuksi perehdyttiin verkottumisen yleisiin haasteisiin ja hyötyihin sekä verkonrakentajan rooliin.
Resumo:
Tutkimuksen tavoitteena oli selvittää sisäisen kommunikoinnin tilannetta case-yrityksissä. Yritykset kuuluvat kahteen case-arvoverkostoon, jotka toimivat informaatio- ja kommunikaatioteknologian alalla. Sisäinen kommunikointi valittiin tutkimusalueeksi, koska se muodostaa perustan ulkoiselle, yritysten väliselle kommunikoinnille. Tutkimuksen painopiste oli web-pohjaisessa kommunikoinnissa ja webin ominaisuuksissa arvoverkoston näkökulmasta. Tutkimusprosessissa käytettiin sekä kvalitatiivisia että kvantitatiivisia menetelmiä. Tutkimuksen kvantitatiivinen osa toteutettiin web-kyselynä, jonka tulokset osoittivat, että case-yritysten sisäinen kommunikointi perustuu pääasiassa perinteisten kommunikointivälineiden käyttöön. Toisin sanoen, webin hyödyntäminen on vähäistä, mihin vaikuttavat monet eri tekijät. Webissä on kuitenkin useita ominaisuuksia, jotka parantavat kommunikointia arvoverkostossa ja siksi nämä web-pohjaiset välineet tulisi huomioida, kun suunnitellaan yleistä kommunikointijärjestelmää. Tutkimuksen teoreettisessa osassa määriteltiin vuorovaikutteisuus-ominaisuuteen perustuva kommunikointivälineiden luokittelu. Tämän lisäksi määriteltiin myös arvoverkoston käsite. Empiirinen osa koostui web-kyselyn toteutuksen ja tulosten raportoinnista, jonka jälkeen yhteenvetokappale koosti merkittävimmät havainnot sekä mahdolliset jatkotutkimusaiheet.