On Commutation and Conjugacy of Rational Languages and the Fixed Point Method

The research on language equations has been active during last decades. Compared to the equations on words the equations on languages are much more difficult to solve. Even very simple equations that are easy to solve for words can be very hard for languages. In this thesis we study two of such equations, namely commutation and conjugacy equations. We study these equations on some limited special cases and compare some of these results to the solutions of corresponding equations on words. For both equations we study the maximal solutions, the centralizer and the conjugator. We present a fixed point method that we can use to search these maximal solutions and analyze the reasons why this method is not successful for all languages. We give also several examples to illustrate the behaviour of this method.

3D Surface Modeling From Point Clouds

The goal of this thesis is to implement software for creating 3D models from point clouds. Point clouds are acquired with stereo cameras, monocular systems or laser scanners. The created 3D models are triangular models or NURBS (Non-Uniform Rational B-Splines) models. Triangular models are constructed from selected areas from the point clouds and resulted triangular models are translated into a set of quads. The quads are further translated into an estimated grid structure and used for NURBS surface approximation. Finally, we have a set of NURBS surfaces which represent the whole model. The problem wasn’t so easy to solve. The selected triangular surface reconstruction algorithm did not deal well with noise in point clouds. To handle this problem, a clustering method is introduced for simplificating the model and removing noise. As we had better results with the smaller point clouds produced by clustering, we used points in clusters to better estimate the grids for NURBS models. The overall results were good when the point cloud did not have much noise. The point clouds with small amount of error had good results as the triangular model was solid. NURBS surface reconstruction performed well on solid models.

Resurssien ja kyvykkyyksien vastaavuus alan muuttuviin vaatimuksiin

Tämän diplomityön tavoitteena on tutkia kohdeyrityksen strategista muutosta perinteisestä tuotetoimittajasta ratkaisujen toimittajaksi. Toimialan muutosta arvioidaan tarkemmin, jotta voidaan selvittää kuinka yrityksen tulisi mukauttaa resurssejaan ja kyvykkyyksiään sopeutuakseen muutoksen tuomiin uusiin haasteisiin. Tarkastelun alla on erityisesti yrityksen strateginen muutos ja kuinka löytää strategian kannalta ne dynaamiset kyvykkyydet joiden avulla yritys saa pysyvää kilpailuetua. Yritykset pyrkivät strategisessa suunnittelussaan pysyvään kilpailuetuun. Strategista johtamisen teorioita on esitetty useita ja niiden kautta on vaikea selittää nykyisin nopeasti muuttuvassa toimintaympäristössä toimivien yritysten menestystä. Dynaamisten kyvykkyyksistä on haettu selitystä menestyksen taakse. Yritysten tavoitellessa kokonaan uusia liiketoiminta-alueita niihin kohdistuu suuria muutoksia niin ulkoisesti kuin sisäisestikin. Tällöin on kriittistä tunnistaa ne ydinkyvykkyydet joiden avulla voidaan menestyä uusilla liiketoiminta-alueilla. Työn ensimmäisessä osassa esitetään strategiaan ja kyvykkyyksiin liittyviä teorioita. Teoriaosiossa tarkastellaan myös palveluyritykseksi muuntautumisen haasteita, jonka jälkeen esitellään kohdeyrityksen strategiset tavoitteet ja kuinka puuttuvia resursseja voidaan tunnistaa. Resurssipohjaisen lähestymistavan avulla päästiin hyvin käsiksi toimialan muutoksen aiheuttamiin puuttuviin resursseihin. Analyysin aikana tunnistettiin puutteita tavoitteisiin nähden ja tässä työssä nousi yhtenä keskeisimpänä esille ICT-osaaminen kohdeyrityksen siirtyessä laitevalmistajan roolista kohti ratkaisun toimittajaa. Tutkimuksen perusteella voidaan todeta, että resurssipohjaisen lähestymistavan avulla voidaan tunnistaa tämän tyyppisessä yrityksessä resurssipuutteita joita kehittämällä yritys voi saavuttaa pysyvää kilpailuetua.

Small scale energy production in Helsinki Metropolitan area in emission trading point of view

Emission trading with greenhouse gases and green certificates are part if the climate policy the main target of which is reduce greenhouse gas emissions. The carbon dioxide and fine particle emissions of energy production in Helsinki Metropolitan area are calculated in this study. The analysis is made mainly by district heating point of view and the changes of the district heating network are assessed. Carbon dioxide emissions would be a bit higher, if the district heating network is expanded, but then the fine particle emissions would be much lower. Carbon dioxide emissions are roughly 10 % higher, if the district heating network is expanded at same rate as it has in past five years in the year 2030. The expansion of district heating network would decrease the fine particle emissions about 40 %. The cost of the expansion is allocated to be reduction cost of the fine particle emissions, which is considerably higher than the traditional reduction methods costs. The possible new nuclear plant would reduce the emissions considerably and the costs of the nuclear plant would be relatively low comparing the other energy production methods.

Kaupallisten lyhyen kantaman radiotekniikoiden kartoitus ja soveltuvuus analyysi metallisorvin ohjauksessa käytettävään point-to-point yhteyteen

Työssä tutkitaan kaupallisten lyhyen kantaman radiotekniikoiden ominaisuuksia sekä soveltuvuutta metallisorvin langattomaan ohjaukseen. Ominaisuuksien perusteella valitaan parhaiten sovellukseen käyvä radiotekniikka.

Kaupallisten lyhyen kantaman radiotekniikoiden kartoitus ja soveltuvuus analyysi metallisorvin ohjauksessa käytettävään point-to-point yhteyteen

Työssä vertaillaan kaupallisia lyhyen kantaman radiotekniikoita. Vertailujen pohjalta valitaan parhaiten sovelluskohteeseen soveltuva radiotekniikka.

Development of Color Difference Equations Matching to Human Vision System

Research on color difference evaluation has been active in recent thirty years. Several color difference formulas were developed for industrial applications. The aims of this thesis are to develop the color density which is denoted by comb g and to propose the color density based chromaticity difference formulas. Color density is derived from the discrimination ellipse parameters and color positions in the xy , xyY and CIELAB color spaces, and the color based chromaticity difference formulas are compared with the line element formulas and CIE 2000 color difference formulas. As a result of the thesis, color density represents the perceived color difference accurately, and it could be used to characterize a color by the attribute of perceived color difference from this color.

Thermal modelling of semiconductor switches in three-level Neutral Point Clamped Medium Voltage DTC-inverter

The aim of this thesis is to investigate the thermal loading of medium voltage three-level NPC inverter’s semiconductor IGCT switches in different operation points. The objective is to reach both a fairly accurate off-line simulation program and also so simple a simulation model that its implementation into an embedded system could be reasonable in practice and a real time use should become feasible. Active loading limitation of the inverter can be realized with a thermal model which is practical in a real time use. Determining of the component heating has been divided into two parts; defining of component losses and establishing the structure of a thermal network. Basics of both parts are clarified. The simulation environment is Matlab-Simulink. Two different models are constructed – a more accurate one and a simplified one. Potential simplifications are clarified with the help of the first one. Simplifications are included in the latter model and the functionalities of both models are compared. When increasing the calculation time step a decreased number of considered components and time constants of the thermal network can be used in the simplified model. Heating of a switching component is dependent on its topological position and inverter’s operation point. The output frequency of the converter defines mainly which one of the switching components is – because of its losses and heating – the performance limiting component of the converter. Comparison of results given by different thermal models demonstrates that with larger time steps, describing of fast occurring switching losses becomes difficult. Generally articles and papers dealing with this subject are written for two-level inverters. Also inverters which apply direct torque control (DTC) are investigated rarely from the heating point of view. Hence, this thesis completes the former material.

Earnings Management Shareholders point of view

This paper studies the relationship of earnings management and investors. Analysis of incentives reveals that most of them are opportunistic in nature. Unfortunately the investor would need insider information to distinguish between different forms of earnings management. Investors in some countries seem to devalue earnings when government body has signaled that earnings management might be involved, unfortunately without a clear signal the behavior seems reverse among non-institutional investors.

Mobile system for pump working point estimation

In the current economy situation companies try to reduce their expenses. One of the solutions is to improve the energy efficiency of the processes. It is known that the energy consumption of pumping applications range from 20 up to 50% of the energy usage in the certain industrial plants operations. Some studies have shown that 30% to 50% of energy consumed by pump systems could be saved by changing the pump or the flow control method. The aim of this thesis is to create a mobile measurement system that can calculate a working point position of a pump drive. This information can be used to determine the efficiency of the pump drive operation and to develop a solution to bring pump’s efficiency to a maximum possible value. This can allow a great reduction in the pump drive’s life cycle cost. In the first part of the thesis, a brief introduction in the details of pump drive operation is given. Methods that can be used in the project are presented. Later, the review of available platforms for the project implementation is given. In the second part of the thesis, components of the project are presented. Detailed description for each created component is given. Finally, results of laboratory tests are presented. Acquired results are compared and analyzed. In addition, the operation of created system is analyzed and suggestions for the future development are given.

Utilization of a Time Domain Simulator in the Technical and Economic Analysis of a Wind Turbine Electric Drive Train

The amount of installed wind power has been growing exponentially during the past ten years. As wind turbines have become a significant source of electrical energy, the interactions between the turbines and the electric power network need to be studied more thoroughly than before. Especially, the behavior of the turbines in fault situations is of prime importance; simply disconnecting all wind turbines from the network during a voltage drop is no longer acceptable, since this would contribute to a total network collapse. These requirements have been a contributor to the increased role of simulations in the study and design of the electric drive train of a wind turbine. When planning a wind power investment, the selection of the site and the turbine are crucial for the economic feasibility of the installation. Economic feasibility, on the other hand, is the factor that determines whether or not investment in wind power will continue, contributing to green electricity production and reduction of emissions. In the selection of the installation site and the turbine (siting and site matching), the properties of the electric drive train of the planned turbine have so far been generally not been taken into account. Additionally, although the loss minimization of some of the individual components of the drive train has been studied, the drive train as a whole has received less attention. Furthermore, as a wind turbine will typically operate at a power level lower than the nominal most of the time, efficiency analysis in the nominal operating point is not sufficient. This doctoral dissertation attempts to combine the two aforementioned areas of interest by studying the applicability of time domain simulations in the analysis of the economicfeasibility of a wind turbine. The utilization of a general-purpose time domain simulator, otherwise applied to the study of network interactions and control systems, in the economic analysis of the wind energy conversion system is studied. The main benefits of the simulation-based method over traditional methods based on analytic calculation of losses include the ability to reuse and recombine existing models, the ability to analyze interactions between the components and subsystems in the electric drive train (something which is impossible when considering different subsystems as independent blocks, as is commonly done in theanalytical calculation of efficiencies), the ability to analyze in a rather straightforward manner the effect of selections other than physical components, for example control algorithms, and the ability to verify assumptions of the effects of a particular design change on the efficiency of the whole system. Based on the work, it can be concluded that differences between two configurations can be seen in the economic performance with only minor modifications to the simulation models used in the network interaction and control method study. This eliminates the need ofdeveloping analytic expressions for losses and enables the study of the system as a whole instead of modeling it as series connection of independent blocks with no lossinterdependencies. Three example cases (site matching, component selection, control principle selection) are provided to illustrate the usage of the approach and analyze its performance.

Comparison of Local Feature Detectors and Descriptors for Visual Object Categorization

Local features are used in many computer vision tasks including visual object categorization, content-based image retrieval and object recognition to mention a few. Local features are points, blobs or regions in images that are extracted using a local feature detector. To make use of extracted local features the localized interest points are described using a local feature descriptor. A descriptor histogram vector is a compact representation of an image and can be used for searching and matching images in databases. In this thesis the performance of local feature detectors and descriptors is evaluated for object class detection task. Features are extracted from image samples belonging to several object classes. Matching features are then searched using random image pairs of a same class. The goal of this thesis is to find out what are the best detector and descriptor methods for such task in terms of detector repeatability and descriptor matching rate.

Side peaks in Nb and NbTi point-contact spectra

Superconductor – normal metal point contacts were investigated, using different combinations of Cu, brass, Nb and NbTi. The resulting spectra contained side peaks. The currents at which these side peaks appeared, depended on the radii of the contacts. For contacts with Nb this dependence was quadratic, while for contacts with NbTi it was linear. Based on this, we argue that the side peaks in the case of the Nb contacts are due to the critical current density being exceeded. In contrast, side peaks of the NbTi contacts are caused by the self-magnetic field exceeding the lower critical field of NbTi. The NbTi contacts did not show the expected contribution from the vanishing Maxwell resistance of the superconductor, a question which remained open.

How is OpenAIRE supporting open access policies and infrastructures in Europe? A Nordic point of view!

Presentation at the Nordic Perspectives on Open Access and Open Science seminar, Helsinki, October 15, 2013